Skip to main content

Deakin Research

Institute for Frontier Materials


Melt Polymer Blending Line

Melt polymer blending line

This melt blending line is designed for the melt blending of polymers, powders or liquids. It is a twin screw configuration with a twin screw side feeder at 30% distance along the length of the screw. All of the feed hoppers have gravimetric control on feed rate. The unit is capable of compounding small runs down to 200gms or large runs up to 100 kilos.


Wayne Yellow Jacket 19mm twin screw blending line


  • 26:1 length to diameter ration
  • gravimetric polymer and powder feed
  • volumetric liquid feed
  • powder addition via a twin screw side feeder
  • adjustable chip length and diameter
  • 0.5-10 kg/hr production rate (polymer dependent)
  • minimum batch size 200 grams

Melt polymer blending line

Deakin University acknowledges the traditional land owners of present campus sites.

27th February 2015