Safety Induction Program

The mandatory Safety Induction Program for all students studying a Faculty of Science, Engineering and Built environment unit or course covers OH&S issues that are likely to be encountered during study.

Each unit comprises of a Safety Seminar and Safety Quiz.

Safety Seminars presented at the beginning of the trimester provide the information required to pass the quiz. Topics covered include OH&S responsibilities, emergency procedures, introduction to staff who assist with first aid and emergency evacuations and how to access the quiz on CloudDeakin.

The Safety Quiz must be completed as soon as possible with a pass mark of 70%. Failure to successfully complete the quiz may result in attendance in practical classes/workshops being restricted.

SRA010/SRA710 - Architecture and Built Environment

It is mandatory for all students enrolled in Architecture and Built Environment units that have a practical structures laboratory or design component to complete SRA010 (undergraduate) or SRA710 (postgraduate). Further attendance in all practical classes may be restricted unless students have passed the online quiz with a mark of 70% or greater. Results for all units requiring the completion of SRA010 or SRA710 as a co-requisite may not be released until the quiz is passed.

Unit requirements:

  1. Attend the Safety Induction Seminar
  2. Pass the safety quiz before the end of week 3 of trimester

Safety Seminar details:

Trimester 1 2017:

Campus Date/Time Location
Geelong Waterfront Monday 27 February 2017, 2:30pm D4.303 (Costa LT)

Contacts:

Linda Tivendale - 522 78649 (Unit Chair)
Des Walters - 522 78357

SEJ010/SEE700 - Engineering

It is mandatory for all students enrolled in an Engineering course or unit to complete SEJ010 (undergraduate) or SEE700 (postgraduate). Your enrolment details will include either of these units if you are required to do it. Further attendance in all practical classes may be restricted unless you have passed the online quiz with a mark of 70% or greater. Results for all units requiring the completion of SEJ010 or SEE700 as a co-requisite may not be released until the quiz is passed.

Unit requirements:

  1. Read and understand safety induction material via CloudDeakin site
  2. Pass the safety quiz before the end of week 2 of trimester

Contacts:

Matthew Joordens - 522 72824 (Unit Chair)
Craig McGill - 522 73452

SIT010 - Information Technology

It is mandatory for all undergraduate students enrolled in an Information Technology course to complete SIT010. Your enrolment details will include this unit if you are required to do it. Further attendance in classes may be restricted unless you have passed the online quiz with a mark of 70% or greater. Results for all units requiring the completion of SIT010 as a co-requisite may not be released until the quiz is passed.

Unit requirements:

  1. Read and understand safety induction material in the SIT010 CloudDeakin site
  2. Pass the safety quiz before the end of week 3 of trimester

Safety Seminar details:

Trimester 1 2017:

Campus Date/Time Location
Melbourne Burwood Wednesday 1 March 2017, 4:00pm T1.01, T1.02, T1.04, T1.05, B4.16, B4.17
Geelong Waurn Ponds Monday 27 February 2017, 4:00pm ka5.302

Contacts:

Morshed Chowdhury - 925 17478 (Unit Chair)
Robert Ruge - 522 71319 (Waurn Ponds)

SLE010 - Life and Environmental Sciences

It is mandatory for all undergraduate students enrolled in a Life and Environmental Sciences course or unit to complete SLE010. Your enrolment details will include this unit if you are required to do it. Attendance in all practical classes and/or field trips may be restricted unless you have passed the online quiz with a mark of 70% or greater. Results for all units requiring the completion of SLE010 as a co-requisite may not be released until the quiz is passed.

Unit requirements:

  1. Attend the Safety Seminar
  2. Pass the safety quiz before the end of week 2 of trimester

Safety Seminar details:

Trimester 1 2017:

Campus Date/Time Location
Melbourne Burwood Wednesday 1 March 2017, 10:00amLT1
Melbourne BurwoodWednesday 1 March 2017, 3:30pmLT13
Melbourne BurwoodTuesday 7 March 2017, 3:00pmLT1A
Geelong Waurn PondsMonday 27 February 2017, 9:00amka3.406
Geelong Waurn PondsMonday 27 February 2017, 3:00pmka3.406
Geelong Waurn PondsMonday 6 March 2017, 4:00pmka4.207
WarrnamboolTo be confirmed

Contacts:

Kieran Lim - 925 17403 (Unit Chair)
Michael Holmes - 925 17340 (Burwood)
David Gleadon - 924 68693 (Waurn Ponds)
David Mills - 556 33473 (Warrnambool)

Cloud students

Cloud students should refer to their respective school's safety unit information above. A laboratory safety guide is posted on each unit site which provides all of the required information to complete the unit.

Students will need to complete the requirements of the safety unit within the time frames specified.

Page custodian: Faculty of Science, Engineering & Built Environment
Last updated: