Dr Alireza Ghaderi

STAFF PROFILE

Position

Visitor

Faculty

Instit for Frontier Materials

Department

Instit for Frontier Materials

Campus

Geelong Waurn Ponds Campus

Qualifications

Doctor of Philosophy, Deakin University, 2011

Contact

a.ghaderi@deakin.edu.au
+61 3 522 73352

Research interests

1- Deformation twinning in HCP metals

2- Thermomechanical properties of metals and alloys

3- Wear properties of hard metals

4- Failure analysis of engineering materials

Conferences

1. A. Ghaderi, P.D. Hodgson, M.R. Barnett, “Microstructure and texture development in Ti-5Al-5Mo-5V-3Cr alloy during cold rolling and annealing”, TMS 142nd annual meeting & exhibition, 3-7 March, 2013 in San Antonio, Texas, USA.
2. A. Ghaderi, P.D. Hodgson, M.R. Barnett, “Hot deformation behaviour of a coarse-grained Ti-5Al-5Mo-5V-3Cr alloy”, 7th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals 2012 in Melbourne, Australia.
3. A. Ghaderi, P.D. Hodgson, M.R. Barnett, “Recrystallization behaviour of a cold rolled Ti-5Al-5Mo-5V-3Cr alloy”, 15th International Conference on Advances in Materials and Processing Technologies, 23-26 September 2012 in Wollongong, NSW, Australia.
4. M.R. Barnett, A. Ghaderi, M.D. Nave, “Twin connectivity in wrought magnesium alloys”, 1st International Conference on 3D Materials Science, 8-12 July 2012 in Seven Springs, Pennsylvania, USA.
5. A. Ghaderi, M.R. Barnett, “Influence of grain size on twinning in two hcp metals”, 6th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals 2011 in Melbourne, Australia.
6. A. Ghaderi, M.R. Barnett, “Effect of grain size on deformation twinning activity in commercial purity titanium”, International Conference and Exhibition on Materials and AustCeram (MA2009), 1-3 July 2009 in Gold Coast, Queensland, Australia.
7. A. Ghaderi, M.R. Barnett, “Effect of grain size on mechanical properties and deformation twinning behavior of CP Ti”, Light Metals Technology Conference (LMT), 29 June- 1st July 2009 in Gold Coast, Queensland, Australia.
8. A. Ghaderi, I. Sabirov, M.R. Barnett, “Effect of grain size on deformation twinning behaviour of high Mn steel”, 47th conference of Metallurgists (COM2008), 24-27 August 2008 in Winnipeg, Manitoba, Canada.

Research groups

http://www.deakin.edu.au/research/ifm/metals/light-metals/index.php

Awards

• PhD Scholarship from ARC Centre of Excellence for Design in Light Metals, 2007-2011
• Best thesis award (second place) in ARC Centre of Excellence for Design in Light Metals, 2011

Publications

Filter by

2020

Modelling of laser powder bed fusion process and analysing the effective parameters on surface characteristics of Ti-6Al-4V

A Khorasani, I Gibson, A Ghasemi, A Ghaderi

(2020), Vol. 168, pp. 1-14, International Journal of Mechanical Sciences, Amsterdam, The Netherlands, C1

journal article

Development of a novel RE-texture component in a Mg-Y-RE/SiCp magnesium composite through friction stir processing

M Mosayebi, A Zarei-Hanzaki, H Abedi, A Jamili, A Ghaderi, M Barnett

(2020), Vol. 260, pp. 1-5, Materials letters, Amsterdam, The Netherlands, C1

journal article
2019

The effect of SLM process parameters on density, hardness, tensile strength and surface quality of Ti-6Al-4V

A Khorasani, I Gibson, U Awan, A Ghaderi

(2019), Vol. 25, pp. 176-186, Additive manufacturing, Amsterdam, The Netherlands, C1

journal article

The scratch behaviour of AlXCoCrFeNi (x=0.3 and 1.0) high entropy alloys

N Haghdadi, T Guo, A Ghaderi, P Hodgson, M Barnett, D Fabijanic

(2019), Vol. 428-429, pp. 293-301, Wear, Amsterdam, The Netherlands, C1

journal article

Investigation on the effect of heat treatment and process parameters on the tensile behaviour of SLM Ti-6Al-4V parts

A Khorasani, I Gibson, A Ghaderi, M Mohammed

(2019), Vol. 101, pp. 3183-3197, International journal of advanced manufacturing technology, London, Eng., C1

journal article

A comprehensive study on variability of relative density in selective laser melting of Ti-6Al-4V

A Khorasani, I Gibson, A Ghasemi, A Ghaderi

(2019), Vol. 14, pp. 349-359, Virtual and physical prototyping, Abingdon, Eng., C1

journal article

Abrasive wear resistance of ferrous microstructures with similar bulk hardness levels evaluated by a scratch-tester method

B Narayanaswamy, A Ghaderi, P Hodgson, P Cizek, Q Chao, M Safi, H Beladi

(2019), Vol. 50, pp. 4839-4850, Metallurgical and materials transactions A, New York, N.Y., C1

journal article

Five-parameter grain boundary characterisation of randomly textured AZ31 Mg alloy

H Beladi, A Ghaderi, G Rohrer

(2019), Vol. 100, pp. 456-466, Philosophical magazine, Abingdon, Eng., C1

journal article
2018

Material wear map for ground-engaging steels based on scratch tests

A Ghaderi, G Saha, T Guo, D Fabijanic, M Barnett

(2018), Vol. 404-405, pp. 153-165, Wear, Amsterdam, The Netherlands, C1

journal article

Rheological characterization of process parameters influence on surface quality of Ti-6Al-4V parts manufactured by selective laser melting

A Khorasani, I Gibson, A Ghaderi

(2018), Vol. 97, pp. 3761-3775, International journal of advanced manufacturing technology, London, Eng., C1

journal article
2017

Numerical analysis of twin thickening process in magnesium alloys

F Siska, L Stratil, J Cizek, A Ghaderi, M Barnett

(2017), Vol. 124, pp. 9-16, Acta materialia, Amsterdam, The Netherlands, C1

journal article
2016

?-Ti grain refinement via ?-Precipitation

A Ghaderi, P Hodgson, M Barnett

(2016), Vol. 47, pp. 1322-1330, Metallurgical and materials transactions a: physical metallurgy and materials science, New York, N.Y., C1

journal article

Microstructure and hardness characterisation of laser coatings produced with a mixture of AISI 420 stainless steel and Fe-C-Cr-Nb-B-Mo steel alloy powders

S Da Sun, D Fabijanic, A Ghaderi, M Leary, J Toton, S Sun, M Brandt, M Easton

(2016), Vol. 296, pp. 76-87, Surface and coatings technology, Amsterdam, The Netherlands, C1

journal article

Hot deformation and recrystallization of a metastable beta titanium ingot

A Ghaderi, P Hodgson, M barnett

(2016), pp. 765-769, Ti-2015: Proceedings of the 13th World Conference on Titanium, San Diego, Calif., E1

conference

The effect of ageing on the compressive deformation of Mg-Sn-Zn-Na alloy

E Motlagh, A Ghaderi, S Kada, P Lynch, M Barnett

(2016), pp. 93-96, Magnesium Technology 2016 : Proceedings of a Symposium held during TMS2016 145th Annual Meeting & Exhibition, Nashville, Tennessee, E1

conference
2014

Contribution of twinning to low strain deformation in a Mg alloy

M Barnett, A Ghaderi, J Robson

(2014), Vol. 45, pp. 3213-3221, Metallurgical and materials transactions A: physical metallurgy and materials science, New York, NY, C1

journal article

Influence of orientation on twin nucleation and growth at low strains in a magnesium alloy

M Barnett, A Ghaderi, J Quinta Da Fonseca, J Robson

(2014), Vol. 80, pp. 380-391, Acta Materialia, Amsterdam, The Netherlands, C1

journal article
2013

Microstructure and texture development in Ti-5Al-5Mo- 5V-3Cr alloy during cold rolling and annealing

A Ghaderi, P Hodgson, M Barnett

(2013), Vol. 551, pp. 210-216, Key Engineering Materials, C1

journal article

Influence of temperature and plastic relaxation on tensile twinning in a magnesium alloy

A Ghaderi, F Siska, M Barnett

(2013), Vol. 69, pp. 521-524, Scripta Materialia, C1

journal article

Plastic relaxation of the internal stress induced by twinning

M Barnett, N Stanford, A Ghaderi, F Siska

(2013), Vol. 61, pp. 7859-7867, Acta Materialia, C1

journal article
2012

Yield point elongation due to twinning in a magnesium alloy

M Barnett, M Nave, A Ghaderi

(2012), Vol. 60, pp. 1433-1443, Acta Materialia, C1

journal article
2011

Sensitivity of deformation twinning to grain size in titanium and magnesium

A Ghaderi, M Barnett

(2011), Vol. 59, pp. 7824-7839, Acta Materialia, C1

journal article
2010

Effect of grain size on deformation twinning in commercial purity titanium

A Ghaderi, M Barnett

(2010), Vol. 34, pp. 49-53, MA 2009 : Proceedings of the Materials and AustCeram 2009 Conference, Surfers Paradise, Qld., E1-1

conference
2009

Deformation modes and anisotropy in magnesium alloy AZ31

B Hutchinson, M Barnett, A Ghaderi, P Cizek, I Sabirov

(2009), Vol. 100, pp. 556-563, International Journal of Materials Research, C1

journal article

Role of grain boundary sliding in the anisotropy of magnesium alloys

M Barnett, A Ghaderi, I Sabirov, B Hutchinson

(2009), Vol. 61, pp. 277-280, Scripta Materialia, C1

journal article
2003

Effect of graphite morphologies on the tribological behavior of austempered cast iron

A Ghaderi, M Nili Ahmadabadi, H Ghasemi

(2003), Vol. 255, pp. 410-416, Wear, Amsterdam, The Netherlands, C1-1

journal article

Funded Projects at Deakin

No Funded Projects at Deakin found

Supervisions

Associate Supervisor
2017

Ehsan Bahrami Motlagh

Thesis entitled: Precipitates and Micro-plasticity in Mg-7.3Sn-3.4Zn-0.04Na Alloy Studied by Synchrotron X-rays

Doctor of Philosophy (Engineering), Institute for Frontier Materials