Dr AmirMahyar Khorasani

STAFF PROFILE

Position

Alfred Deakin Postdoctoral Research Fellow

Faculty

Faculty of Sci Eng & Built Env

Department

School of Engineering

Campus

Geelong Waurn Ponds Campus

Publications

Filter by

2020

Modelling of laser powder bed fusion process and analysing the effective parameters on surface characteristics of Ti-6Al-4V

A Khorasani, I Gibson, A Ghasemi, A Ghaderi

(2020), Vol. 168, pp. 1-14, International Journal of Mechanical Sciences, Amsterdam, The Netherlands, C1

journal
2019

The effect of SLM process parameters on density, hardness, tensile strength and surface quality of Ti-6Al-4V

A Khorasani, I Gibson, U Awan, A Ghaderi

(2019), Vol. 25, pp. 176-186, Additive manufacturing, Amsterdam, The Netherlands, C1

journal

Investigation on the effect of heat treatment and process parameters on the tensile behaviour of SLM Ti-6Al-4V parts

A Khorasani, I Gibson, A Ghaderi, M Mohammed

(2019), Vol. 101, pp. 3183-3197, International journal of advanced manufacturing technology, London, Eng., C1

journal

A comprehensive study on variability of relative density in selective laser melting of Ti-6Al-4V

A Khorasani, I Gibson, A Ghasemi, A Ghaderi

(2019), Vol. 14, pp. 349-359, Virtual and physical prototyping, Abingdon, Eng., C1

journal

Effect of geometry on the mechanical properties of Ti-6Al-4V Gyroid structures fabricated via SLM: A numerical study

E Yang, M Leary, B Lozanovski, D Downing, M Mazur, A Sarker, A Khorasani, A Jones, T Maconachie, S Bateman, M Easton, M Qian, P Choong, M Brandt

(2019), Vol. 184, pp. 1-24, Materials and Design, Amsterdam, The Netherlands, C1

journal
2018

A comprehensive study on surface quality in 5-axis milling of SLM Ti-6Al-4V spherical components

A Khorasani, I Gibson, M Goldberg, G Littlefair

(2018), Vol. 94, pp. 3765-3784, International journal of advanced manufacturing technology, London, Eng., C1

journal

Investigation on the effect of a pre-center drill hole and tool material on thrust force, surface roughness, and cylindricity in the drilling of Al7075.

A Ghasemi, A Khorasani, I Gibson

(2018), Vol. 11, Materials, Basel, Switzerland, C1

journal

Mass transfer and flow in additive manufacturing of a spherical component

A Khorasani, I Gibson, M Asadnia, W O Neill

(2018), Vol. 96, pp. 3711-3718, International Journal of Advanced Manufacturing Technology, London, Eng., C1

journal

Characterizing the effect of cutting condition, tool path, and heat treatment on cutting forces of selective laser melting spherical component in five-axis milling

A Khorasani, I Gibson, M Goldberg, G Littlefair

(2018), Vol. 140, pp. 1-16, Journal of manufacturing science and engineering, New York, N.Y., C1

journal

Rheological characterization of process parameters influence on surface quality of Ti-6Al-4V parts manufactured by selective laser melting

A Khorasani, I Gibson, A Ghaderi

(2018), Vol. 97, pp. 3761-3775, International journal of advanced manufacturing technology, London, Eng., C1

journal
2017

Development of a dynamic surface roughness monitoring system based on artificial neural networks (ANN) in milling operation

A Khorasani, M Yazdi

(2017), Vol. 93, pp. 141-151, International journal of advanced manufacturing technology, London, Eng., C1

journal

Production of Ti-6Al-4V acetabular shell using selective laser melting: possible limitations in fabrication

A Khorasani, I Gibson, M Goldberg, G Littlefair

(2017), Vol. 23, pp. 110-121, Rapid prototyping journal, Bingley, Eng., C1

journal

On the role of different annealing heat treatments on mechanical properties and microstructure of selective laser melted and conventional wrought Ti-6Al-4V

A Khorasani, I Gibson, M Goldberg, G Littlefair

(2017), Vol. 23, pp. 295-304, Rapid prototyping journal, Bingley, United Kingdom, C1

journal

An accurate PSO-GA based neural network to model growth of carbon nanotubes

M Asadnia, A Khorasani, M Warkiani

(2017), Vol. 2017, Journal of Nanomaterials, Cairo, Egypt, C1

journal

The effect of vibration during friction stir welding on corrosion behavior, mechanical properties, and machining characteristics of stir zone

S Fouladi, A Ghasemi, M Abbasi, M Abedini, A Khorasani, I Gibson

(2017), Vol. 7, pp. 421-433, Metals, Basel, Switzerland, C1

journal

Thermal stress flow analysis in fabrication of acetabular shells using SLM

A Khorasani, I Gibson, M Goldberg, M Movahedi, G Littlefair

(2017), pp. 297-307, DesTech 2016: Proceedings of the International Conference on Design and Technology, Geelong, Victoria, E1

conference
2016

Investigation on the effect of cutting fluid pressure on surface quality measurement in high speed thread milling of brass alloy (C3600) and aluminium alloy (5083)

A Khorasani, I Gibson, M Goldberg, E Doeven, G Littlefair

(2016), Vol. 82, pp. 55-63, Measurement: journal of the international measurement confederation, Amsterdam, The Netherlands, C1

journal

A survey on mechanisms and critical parameters on solidification of selective laser melting during fabrication of Ti-6Al-4V prosthetic acetabular cup

A Khorasani, I Gibson, M Goldberg, G Littlefair

(2016), Vol. 103, pp. 348-355, Materials and design, Amsterdam, The Netherlands, C1

journal

An improved static model for tool deflection in machining of Ti-6Al-4V acetabular shell produced by selective laser melting

A Khorasani, I Gibson, N Godarzvand Chegini, M Goldberg, A Ghasemi, G Littlefair

(2016), Vol. 92, pp. 534-544, Measurement: journal of the International Measurement Confederation, Amsterdam, The Netherlands, C1

journal

Optimizing time delay feedback for active vibration control of a cantilever beam using a genetic algorithm

S Mirafzal, A Khorasani, A Ghasemi

(2016), Vol. 22, pp. 4047-4061, Journal of vibration and control, London, Eng., C1

journal

Machinability of metallic and ceramic biomaterials : a review

A Khorasani, I Gibson, M Goldberg, J Nomani, G Littlefair

(2016), Vol. 8, pp. 1491-1511, Science of advanced materials, Stevenson Ranch, Cal., C1

journal
2015

Titanium in biomedical applications-properties and fabrication: a review

A Khorasani, M Goldberg, E Doeven, G Littlefair

(2015), Vol. 5, pp. 593-619, Journal of biomaterials and tissue engineering, Valencia, Calif., C1

journal
2013

Modeling and optimization of the cutting fluid flow and parameters for increasing tool life in slot milling on St52

A Khorasani, A Kootsookos

(2013), Vol. 4, International journal of modeling, simulation, and scientific computing, Singapore, C1-1

journal

Modeling of TiC-N thin film coating process on drills using particle swarm optimization algorithm

A Khorasani, M Asadnia, P Saadatkia

(2013), Vol. 38, pp. 1565-1571, Arabian journal for science and engineering, Cham, Switzerland, C1-1

journal

Funded Projects at Deakin

No Funded Projects at Deakin found

Supervisions

No completed student supervisions to report