Biography summary
Prof Bernard Rolfe is the Associate Dean, Research for the Faculty of Science, Engineering and Built Environment (SEBE). SEBE has over 400 academic staff, 600 PhD students, and more than $24M per annum in external research income. Bernard aims to improve research quality and capacity, while also overseeing research policy and procedures. He aspires to make SEBE a great place to do research.
Bernard is an innovator in materials and manufacturing and an influencer in mobility engineering. He is a Director on the Board of the Society of Automotive Engineers – Australasia. Bernard’s substantive position is as a Professor of Advanced Manufacturing in the School of Engineering at Deakin University. His qualifications include a combined Economics and Engineering degree with honours in 1995 from the Australian National University (ANU). After completing his bachelor's degrees, he initially embarked on a career in business and technology consulting with Andersen Consulting before returning to the ANU to complete a PhD in Advanced Manufacturing (2002). He joined Deakin as post-doctoral fellow in 2002 and then became a lecturer in 2005. Bernard’s research group has spent the past two decades working on the use of advanced metals in sheet forming primarily for the automotive sector.
In 2021 Bernard was the leader for the unsuccessful Regional Advanced Manufacturing Cooperative Research Centre bid, which consisted of 63 partners (85% are SMEs), $36M in committed funds over 7 years, $38M in requested funds from the Dept of Industry, and $150M in total project value. His current research focus is the design and forming of lightweight structures. He is also investigating design techniques for production and repairing of parts using additive manufacturing. Bernard has received four Vice Chancellor awards and has been part of over fifteen successful nationally competitive large research grants, totalling over AUD $30 million in awarded funds. He has published over 190 refereed research articles.
Research interests
- Additive Manufacturing
- Sheet Metal Forming
- People Centred Manufacturing
- Material Modelling
- Lightweight Design
- Multi-material optimisation
Units taught
Previously taught:
SEM406 - Advanced Modelling and Simulation
SED202 - Mechanical Design
Knowledge areas
Additive Manufacturing, Forming lightweight structures, Sheet metal forming, Modelling material behaviour, Design of lightweight structures, People centred manufacturing
Research groups
- IFM Sheet Forming Group
- IFM Computational Modelling Group
- Eng 3DEC
- Eng Advanced Manufacturing Group
Projects
Current Projects:
ARC Industrial Training Research Hub:
- ARC Training Centre in Lightweight Automotive Structures (ATLAS) - led by RMIT
ARC Linkages:
- Metal folding fundamentals to shape new corrugated building products (LP200100265)
Royal Australian Air Force:
- Transition Research in Disruption Technology - led by Griffith University
Overall, 2 ARC Discovery grants, 8 ARC (Industry) Linkage grants, 1 ARC Industrial Transformation Research Hub, 1 ARC Industrial Transformation Training Centre, 6 ARC LIEF, 5 Large AutoCRC projects, 4 large WISCO projects, 1 BNSF – small grant, Winner of an international automotive design competition - $30 million (total)
Publications
B Dong, T Hou, K Wu, B Rolfe, L Kong, M Cai, P Hodgson
(2023), Vol. 196, pp. 112635-112635, Materials Characterization, C1
Laser subtractive and laser powder bed fusion of metals: review of process and production features
M Khorasani, I Gibson, A Ghasemi, E Hadavi, B Rolfe
(2023), Rapid Prototyping Journal, C1
Recent Progress of 4D Printing in Cancer Therapeutics Studies
Atchara Chinnakorn, Wiwat Nuansing, Mahdi Bodaghi, Bernard Rolfe, Ali Zolfagharian
(2023), SLAS Technology, Amsterdam, The Netherlands, C1
Topological design of cellular structures for maximum shear modulus using homogenization SEMDOT
Y Fu, K Long, A Zolfagharian, M Bodaghi, B Rolfe
(2023), pp. 1-5, Materials Today: Proceedings, Amsterdam, The Netherlands, C1
Multimaterial 4D Printing with Tunable Bending Model
Ali Zolfagharian, Hamid Jarrah, Matheus Dos Santos Xavier, Bernard Rolfe, Mahdi Bodaghi
(2023), Vol. 32, pp. 1-18, Smart Materials and Structures, Bristol, Eng., C1
A Sreenivas, B Abeyrathna, B Rolfe, M Weiss
(2023), Vol. 252, pp. 1-26, International Journal of Mechanical Sciences, Amsterdam, The Netherlands, C1
Incremental shape rolling of a variable depth profile
A Essa, B Abeyrathna, B Rolfe, M Weiss
(2023), Vol. 316, pp. 1-15, Journal of Materials Processing Technology, Amsterdam, The Netherlands, C1
On Non-Penalization SEMDOT Using Discrete Variable Sensitivities
Y Fu, K Long, B Rolfe
(2023), pp. 1-34, Journal of Optimization Theory and Applications, Berlin, Germany, C1
Benchmark models for conduction and keyhole modes in laser-based powder bed fusion of Inconel 718
M Khorasani, A Ghasemi, M Leary, D Downing, I Gibson, E Sharabian, J Veetil, M Brandt, S Bateman, B Rolfe
(2023), Vol. 164, pp. 1-13, Optics and Laser Technology, Amsterdam, The Netherlands, C1
M Khorasani, M Leary, D Downing, J Rogers, A Ghasemi, I Gibson, S Brudler, B Rolfe, M Brandt, S Bateman
(2023), Vol. 188, pp. 1-18, Thin Walled Structures, Amsterdam, The Netherlands, C1
Manufacturing constrained shape optimisation of variable width flat web formed channels
J Gong, K Ghabraie, M Weiss, A Sreenivas, B Rolfe
(2023), pp. 1-24, International Journal of Advanced Manufacturing Technology, Berlin, Germany, C1
Friction and Wear in Stages of Galling for Sheet Metal Forming Applications
Timothy Devenport, James Griffin, Bernard Rolfe, Michael Pereira
(2023), Vol. 11, pp. 1-16, Lubricants, Basel, Switzerland, C1
Anisotropic plasticity and fracture modelling of cold rolled AA5754
Borja Erice, Bernard Rolfe, Joseba Mendiguren
(2023), Vol. 289, pp. 1-23, Engineering Fracture Mechanics, Amsterdam, The Netherlands, C1
Additive Manufacturing of Composite Foam Metamaterial Springs for Vibration Isolation
A Zolfagharian, P Picken, M Bodaghi, M Fard, B Rolfe
(2023), pp. 1-25, Advanced Engineering Materials, London, Eng., C1
Random screening-based feature aggregation for point cloud denoising
W Wang, W Pan, X Liu, K Su, B Rolfe, X Lu
(2023), Vol. 116, pp. 64-72, Computers and Graphics, Amsterdam, The Netherlands, C1
Sustainable Robots 4D Printing
H Soleimanzadeh, B Rolfe, M Bodaghi, M Jamalabadi, X Zhang, A Zolfagharian
(2023), pp. 1-41, Advanced Sustainable Systems, London, Eng., C1
Flange wrinkling in incremental shape rolling
A Essa, B Abeyrathna, B Rolfe, M Weiss
(2023), Vol. 28, pp. 1047-1056, ESAFORM 2023 : Proceedings of the 26th International ESAFORM Conference on Material Forming 2023, Krakow, Poland, E1
Part quality improvement in flexible roll forming of a combined variable width and depth component
B Abeyrathna, B Rolfe, R Taube, B Oxley, M Weiss
(2023), Vol. 1284, pp. 1-10, IDDRG 2023 : Proceedings of the 42nd International Deep Drawing Research Group Conference, Lulea, Sweden, E1
Formed developables - a new class of sheet metal parts
J Bhuva, M Weiss, B Rolfe, J Jiao, M Paulino
(2023), Vol. 1284, pp. 1-9, IDDRG 2023 : Proceedings of the 42nd International Deep Drawing Research Group Conference, Lulea, Sweden, E1
4D printing modeling using ABAQUS: A guide for beginners
H Jarrah, A Zolfagharian, B Rolfe, M Bodaghi
(2022), Vol. 2, pp. 53-72, Smart Materials in Additive Manufacturing, volume 2: 4D Printing Mechanics, Modeling, and Advanced Engineering Applications, Amsterdam, The Netherlands, B1
Additive manufacturing a powerful tool for the aerospace industry
M Khorasani, A Ghasemi, B Rolfe, I Gibson
(2022), Vol. 28, pp. 87-100, Rapid Prototyping Journal, Bingley, Eng., C1
Optimising part quality in the flexible roll forming of an automotive component
B Abeyrathna, S Ghanei, B Rolfe, R Taube, M Weiss
(2022), Vol. 118, pp. 3361-3373, International Journal of Advanced Manufacturing Technology, Berlin, Germany, C1
Investigation of material failure in micro-stamping of metallic bipolar plates
P Zhang, M Pereira, B Rolfe, D Wilkosz, P Hodgson, M Weiss
(2022), Vol. 73, pp. 54-66, Journal of Manufacturing Processes, Amsterdam, The Netherlands, C1
A Asfia, J Novak, B Rolfe, T Kron
(2022), Vol. 28, pp. 945-952, Rapid Prototyping Journal, C1
A Asfia, B Deepak, J Novak, B Rolfe, T Kron
(2022), Vol. 23, pp. 1-11, Journal of Applied Clinical Medical Physics, London, Eng., C1
A comprehensive study on meltpool depth in laser-based powder bed fusion of Inconel 718
M Khorasani, A Ghasemi, M Leary, L Cordova, E Sharabian, E Farabi, I Gibson, M Brandt, B Rolfe
(2022), Vol. 120, pp. 2345-2362, International Journal of Advanced Manufacturing Technology, Berlin, Germany, C1
Mohsen Sarafraz, Maryam Nakhjavani, Sarah Shigdar, Farid Christo, Bernard Rolfe
(2022), Vol. 173, pp. 121-131, European Journal of Pharmaceutics and Biopharmaceutics, Amsterdam, The Netherlands, C1
M Khorasani, A Ghasemi, E Farabi, M Leary, I Gibson, B Rolfe
(2022), pp. 1-20, International Journal of Advanced Manufacturing Technology, Berlin, Germany, C1
A review of Industry 4.0 and additive manufacturing synergy
M Khorasani, J Loy, A Ghasemi, E Sharabian, M Leary, H Mirafzal, P Cochrane, B Rolfe, I Gibson
(2022), pp. 1-14, Rapid Prototyping Journal, Bingley, Eng., C1
The effect of absorption ratio on meltpool features in laser-based powder bed fusion of IN718
M Khorasani, A Ghasemi, M Leary, E Sharabian, L Cordova, I Gibson, D Downing, S Bateman, M Brandt, B Rolfe
(2022), Vol. 153, pp. 1-14, Optics and Laser Technology, Amsterdam, The Netherlands, C1
3D-printed programmable mechanical metamaterials for vibration isolation and buckling control
Ali Zolfagharian, Mahdi Bodaghi, Ramin Hamzehei, Liam Parr, Mohammed Fard, Bernard Rolfe
(2022), Vol. 14, pp. 6831-6831, Sustainability, Basel, Switzerland, C1
Analysis of Acoustic Emissions for Determination of the Mechanical Effects of Scratch Tests
T Devenport, B Rolfe, M Pereira, J Griffin
(2022), Vol. 12, pp. 1-22, Applied Sciences, Basel, Switzerland, C1
Prototyping of straight section components using incremental shape rolling
A Essa, B Abeyrathna, B Rolfe, M Weiss
(2022), Vol. 121, pp. 3883-3901, International Journal of Advanced Manufacturing Technology, Berlin, Germany, C1
Sandwich structure printing of Ti-Ni-Ti by directed energy deposition
A Farzaneh, M Khorasani, E Farabi, I Gibson, M Leary, A Ghasemi, B Rolfe
(2022), Vol. 17, pp. 1006-1030, Virtual and Physical Prototyping, London, Eng., C1
Longitudinal strain and wrinkling analysis of variable depth flexible roll forming
A Sreenivas, B Abeyrathna, B Rolfe, M Weiss
(2022), Vol. 81, pp. 414-432, Journal of Manufacturing Processes, C1
Deformation and Fracture in Micro-stamping Process
P Zhang, M Pereira, B Abeyrathna, B Rolfe, D E.Wilkosz, P Hodgson, M Weiss
(2022), pp. 61-69, Minerals, Metals and Materials Series, E1
A novel incremental sheet metal forming process for long and open section profiles
A Essa, B Abeyrathna, B Rolfe, M Weiss
(2022), Vol. 1238, pp. 1-8, IDDRG 2022 : Proceedings of the International-Deep-Drawing-Research-Group Conference, Lorient, France, E1
Build position-based dimensional deviations of laser powder-bed fusion of stainless steel 316L
J Veetil, M Khorasani, A Ghasemi, B Rolfe, I Vrooijink, K Van Beurden, S Moes, I Gibson
(2021), Vol. 67, pp. 58-68, Precision Engineering, C1
Smooth design of 3d self-supporting topologies using additive manufacturing filter and semdot
Y Fu, K Ghabraie, B Rolfe, Y Wang, L Chiu
(2021), Vol. 11, pp. 1-17, Applied Sciences (Switzerland), C1
M Weiss, P Zhang, M Pereira, B Rolfe, D Wilkosz, P Hodgson
(2021), Vol. 11, pp. 1-21, Metals, C1
4D printing soft robots guided by machine learning and finite element models
A Zolfagharian, L Durran, S Gharaie, B Rolfe, A Kaynak, M Bodaghi
(2021), Vol. 328, Sensors and Actuators, A: Physical, C1
M Khorasani, A Ghasemi, U Awan, S Singamneni, G Littlefair, E Farabi, M Leary, I Gibson, J Veetil, B Rolfe
(2021), Vol. 12, pp. 2438-2452, Journal of Materials Research and Technology, C1
M Khorasani, A Ghasemi, M Leary, W O'Neil, I Gibson, L Cordova, B Rolfe
(2021), Vol. 177, International Journal of Heat and Mass Transfer, C1
J Griffin, V Shanbhag, M Pereira, B Rolfe
(2021), Vol. 116, pp. 579-596, International Journal of Advanced Manufacturing Technology, C1
Parametric studies and manufacturability experiments on smooth self-supporting topologies
Yun-Fei Fu, Bernard Rolfe, Louis Chiu, Yanan Wang, Xiaodong Huang, Kazem Ghabraie
(2020), Vol. 15, pp. 22-34, Virtual and physical prototyping, Abingdon, Eng., C1
Smooth topological design of 3D continuum structures using elemental volume fractions
Y Fu, B Rolfe, L Chiu, Y Wang, X Huang, K Ghabraie
(2020), Vol. 231, Computers and Structures, C1
Investigation of galling wear using acoustic emission frequency characteristics
V Shanbhag, B Rolfe, M Pereira
(2020), Vol. 8, Lubricants, C1
A review of 3D printed patient specific immobilisation devices in radiotherapy
A Asfia, J Novak, M Mohammed, B Rolfe, T Kron
(2020), Vol. 13, pp. 30-35, Physics and Imaging in Radiation Oncology, Netherlands, C1
D Han, H Ding, D Liu, B Rolfe, H Beladi
(2020), Vol. 785, Materials Science and Engineering A, C1
A review of laser engineered net shaping (LENS) build and process parameters of metallic parts
M Izadi, A Farzaneh, M Mohammed, I Gibson, B Rolfe
(2020), Vol. 26, pp. 1059-1078, Rapid Prototyping Journal, C1
Plastic instability and fracture of ultra-thin stainless-steel sheet
P Zhang, M Pereira, B Abeyrathna, B Rolfe, D Wilkosz, P Hodgson, M Weiss
(2020), Vol. 202, pp. 699-716, International Journal of Solids and Structures, Amsterdam, The Netherlands, C1
Infill selection for 3D printed radiotherapy immobilisation devices
A Asfia, B Deepak, J Novak, B Rolfe, T Kron
(2020), Vol. 6, Biomedical Physics and Engineering Express, England, C1
SEMDOT: Smooth-edged material distribution for optimizing topology algorithm
Y Fu, B Rolfe, L Chiu, Y Wang, X Huang, K Ghabraie
(2020), Vol. 150, Advances in Engineering Software, C1
S Khaleel, T Hilditch, R Al-Ameri, B Rolfe
(2020), Vol. 13, pp. 229-240, SAE International Journal of Materials and Manufacturing, C1
Strain rate effect on the fracture behavior of the AA5754 aluminum alloy
M Bueno, L Galdos, E de Argandoña, M Weiss, B Rolfe, Y Lou, J Mendiguren
(2020), Vol. 47, pp. 1264-1269, ESAFORM 2020 : Proceedings of the 23rd International Conference on Material Forming, [Online], E1
Optimizing 3D self-supporting topologies for additive manufacturing
Yun Fu, Kazem Ghabraie, Bernard Rolfe, Yanan Wang, Louis Chiu, Xiaodong Huang
(2020), pp. 220-223, ICCMS 2020 : Proceedings of the 12th International Conference on Computer Modeling and Simulation, Brisbane, Qld. (Online), E1
Springback and end flare compensation in flexible roll forming
B Abeyrathna, S Ghanei, B Rolfe, R Taube, M Weiss
(2020), Vol. 967, pp. 1-7, IDDRG 2020 : Proceedings of the International Deep Drawing Research Group Annual Conference 2020, Online from Seoul, South Korea, E1
P Souza, J Mendiguren, Q Chao, H Beladi, P Hodgson, B Rolfe
(2019), Vol. 748, pp. 30-37, Materials Science and Engineering A, C1
Effect of pro-eutectoid ferrite on subsequent bainite transformation kinetics simulation
X Chen, B Rolfe, A Abdollahpoor, N Xiao, D Li
(2019), Vol. 35, pp. 429-436, Materials, science and technology, Abingdon, Eng., C1
S Khaleel, B Rolfe, R Al-Ameri, T Hiliditch
(2019), Vol. 20, pp. 379-387, International Journal of Automotive Technology, C1
P Souza, P Hodgson, B Rolfe, R Singh, H Beladi
(2019), Vol. 793, pp. 467-479, Journal of alloys and compounds, Amsterdam, The Netherlands, C1
H Kong, Q Chao, B Rolfe, H Beladi
(2019), Vol. 174, Materials and Design, C1
Design and experimental validation of self-supporting topologies for additive manufacturing
Y Fu, B Rolfe, L Chiu, Y Wang, X Huang, K Ghabraie
(2019), Vol. 14, pp. 382-394, Virtual and physical prototyping, Abingdon, Eng., C1
Understanding galling wear initiation and progression using force and acoustic emissions sensors
V Shanbhag, B Rolfe, J Griffin, N Arunachalam, M Pereira
(2019), Vol. 436-437, Wear, C1
P Zhang, M Pereira, B Abeyrathna, B Rolfe, D Wilkosz, M Weiss
(2019), Vol. 164, International Journal of Mechanical Sciences, C1
X Chen, S Zhang, B Rolfe, D Li
(2019), Vol. 6, Materials Research Express, C1
Investigation of stamping tool wear initiation at microscopic level using acoustic emission sensors
V Shanbhag, B Rolfe, Arunachalam N, M Pereira
(2019), Vol. 794, pp. 285-294, AEPA 2018 : Proceedings of the 14th Asia-Pacific Symposium on Engineering Plasticity and its Applications: Key Engineering Materials, Jeju Island, Korea, E1
The surface temperature prediction on steel-tool steel sliding pairs
P Okonkwo, G Kelly, M Khan, M Pereira, B Rolfe, M Islam
(2019), pp. 1-5, ICMSAO 2019 : 8th International Conference on Modeling Simulation and Applied Optimization, Manama, Bahrain, E1
Developing smart multi-sensor monitoring for tool wear in stamping process
Vignesh Shanbhag, Michael Pereira, Brendan Voss, Indivarie Ubhayaratne, Bernard Rolfe
(2019), Vol. 651, pp. 1-8, IDDRG 2019 : Proceedings of the 38th International Deep Drawing Research Group Annual Conference, Enschede, Netherlands, E1
S Ghanei, B Abeyrathna, B Rolfe, M Weiss
(2019), Vol. 651, pp. 1-8, IDDRG 2019 : Proceedings of the 39th International Deep Drawing Research Group Annual Conference, Enschede, The Netherlands, E1
A first step towards an in-line shape compensation for UHSS roll forming
B Abeyrathna, B Rolfe, M Weiss
(2019), Vol. 651, pp. 1-9, IDDRG 2019 : Proceedings of the 38th International Deep Drawing Research Group Annual Conference, Enschede, The Netherlands, E1
A Novel Tailored Hot Stamping Tooling Concept to Achieve Multiple Locally Tailored Zones
Y Wang, M Pereira, B Rolfe, Y Liu, Z Zhu, J Zhu, Z Wang, Y Zhang
(2019), ICHSU 2018 : Advanced High Strength Steel and Press Hardening : Proceedings of the 4th International Conference on Advanced High Strength Steel and Press Hardening, Hefei, China, E1
Analyzing Large Tooling Cooling Using CFD
B Rolfe, W Gao, M Pereira, Y Wang, L Pan, G Rui
(2019), pp. 250-256, ICHSU 2018 : Advanced High Strength Steel and Press Hardening : Proceedings of the 4th International Conference on Advanced High Strength Steel and Press Hardening, Hefei, China, E1
Developing New Steels for Hot Stamping via Partial Austenization
B Rolfe, H Beladi, H Kong, E Pavlina, M Cai
(2019), pp. 322-329, ICHSU 2018 : Advanced High Strength Steel and Press Hardening : Proceedings of the 4th International Conference on Advanced High Strength Steel and Press Hardening, Hefei, China, E1
H Kong, Q Chao, M Cai, E Pavlina, B Rolfe, P Hodgson, H Beladi
(2018), Vol. 49, pp. 1509-1519, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1
Application of a Model for Quenching and Partitioning in Hot Stamping of High-Strength Steel
B Zhu, Z Liu, Y Wang, B Rolfe, L Wang, Y Zhang
(2018), Vol. 49, pp. 1304-1312, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1
Study on Breakdown Probability of Multimaterial Electrodes in EDM
Y Liu, W Wang, W Zhang, F Ma, Y Wang, B Rolfe, S Zhang
(2018), Vol. 2018, Advances in Materials Science and Engineering, C1
O Badr, B Rolfe, M Weiss
(2018), Vol. 32, pp. 513-521, Journal of Manufacturing Processes, C1
P Souza, H Beladi, R Singh, P Hodgson, B Rolfe
(2018), Vol. 27, pp. 3545-3558, Journal of Materials Engineering and Performance, C1
Effect of stiffness anisotropy on topology optimisation of additively manufactured structures
L Chiu, B Rolfe, X Wu, Wenyi Yan
(2018), Vol. 171, pp. 842-848, Engineering Structures, London, Eng., C1
S Zhang, J Yin, Y Liu, N Liu, Z Sha, Y Wang, B Rolfe
(2018), Vol. 10, Advances in Mechanical Engineering, C1
Combined hot stamping and Q & P processing with a hot air partitioning device
B Zhu, J Zhu, Y Wang, B Rolfe, Z Wang, Y Zhang
(2018), Vol. 262, pp. 392-402, Journal of materials processing technology, Amsterdam, The Netherlands, C1
S Zhang, J Yin, Y Liu, Z Sha, F Ma, Y Wang, B Rolfe
(2018), Vol. 2018, Mathematical Problems in Engineering, C1
Investigating galling wear behaviour in sheet metal stamping using acoustic emissions
V Shanbhag, B Rolfe, N Arunachalam, M Pereira
(2018), Vol. 414-415, pp. 31-42, Wear, C1
Experimental Investigation of the UV Influence on the Fatigue Life of SLJ of CFRP/AL
S Khaleel, T Hilditch, B Rolfe, R Al-Ameri
(2018), Vol. 10, International Journal of Applied Mechanics, C1
N Xiao, P Hodgson, B Rolfe, D Li
(2018), Vol. 155, pp. 298-311, Computational materials science, Amsterdam, The Netherlands, C1
A new strain-based method to determine GTN parameters for thin stainless steel foil
P Zhang, Michael Pereira, Bernard Rolfe, Daniel Wilkosz, Buddhika Abeyrathna, Matthias Weiss
(2018), Vol. 1063, pp. 1-6, NUMISHEET 2018: Proceedings of the 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Tokyo, Japan, E1
Understanding the source of acoustic emission signals during the wear of stamping tools
V Shanbhag, B Rolfe, N Arunachalam, M Pereira
(2018), Vol. 418, pp. 1-8, IDDRG 2018 : Forming of high performance sheet materials and components : Proceedings of the 37th International Deep Drawing Research Group Conference, Waterloo, Ont., E1
Evolution of elastic modulus in roll forming
A Abvabi, J Mendiguren, A Kupke, B Rolfe, M Weiss
(2017), Vol. 10, pp. 463-471, International journal of material forming, Paris, France, C1
Local deformation in roll forming
B Abeyrathna, B Rolfe, P Hodgson, M Weiss
(2017), Vol. 88, pp. 2405-2415, International journal of advanced manufacturing technology, London, Eng., C1
Effect of coil set on shape defects in roll forming steel strip
M Weiss, B Abeyrathna, B Rolfe, A Abee, H Wolfkamp
(2017), Vol. 25, pp. 8-15, Journal of manufacturing processes, Amsterdam, The Netherlands, C1
Audio signal analysis for tool wear monitoring in sheet metal stamping
I Ubhayaratne, M Pereira, Y Xiang, B Rolfe
(2017), Vol. 85, pp. 809-826, Mechanical systems and signal processing, Amsterdam, The Netherlands, C1
Effect of optimisation parameters in topology optimisation
N Chiu, D Stojanov, B Rolfe, W Yan
(2017), Vol. 725, pp. 529-534, Key engineering materials, Pfaffikon, Switzerland, C1
B Abeyrathna, B Rolfe, M Weiss
(2017), Vol. 92, pp. 743-754, International journal of advanced manufacturing technology, Berlin, Germany, C1
Second-Order Cyclostationary Statistics-Based Blind Source Extraction from Convolutional Mixtures
Y Xiang, D Peng, I Ubhayaratne, B Rolfe, M Pereira
(2017), Vol. 5, pp. 2011-2019, IEEE Access, C1
O Badr, B Rolfe, P Zhang, M Weiss
(2017), Vol. 128-129, pp. 389-400, International Journal of Mechanical Sciences, C1
X Chen, B Rolfe, A Abdollahpoor, N Xiao, D Li
(2017), Vol. 108, pp. 441-446, International Journal of Materials Research, Munich, Germany, C1
A new methodology for measuring galling wear severity in high strength steels
B Voss, M Pereira, B Rolfe, M Doolan
(2017), Vol. 390-391, pp. 334-345, Wear, Amsterdam, The Netherlands, C1
One-step quenching and partitioning treatment of a commercial low silicon boron steel
H Kong, Q Chao, M Cai, E Pavlina, B Rolfe, P Hodgson, H Beladi
(2017), Vol. 707, pp. 538-547, Materials Science and Engineering A, C1
Integrated shape and topology optimization - applications in automotive design and manufacturing
K Fiedler, B Rolfe, T De Souza
(2017), Vol. 10, pp. 385-394, SAE international journal of materials and manufacturing, Warrendale, Pa., C1
S Khaleel, B Rolfe, R Al-Ameri, T De Susa
(2017), Vol. 2017-January, pp. 1-6, SAE technical papers : SIAT 2017 : Proceedings of the 2017 Symposium on International Automative Techology, Maharashtra, India, E1
Local patchworking of sheet properties combining carburization and hot stamping
B Rolfe, A Abdollahpoor, Y Wang, M Pereira, H Kong, D Fabijanic, K Hu, R Han, K Gao, A Liu, L Pan, Y Bi, Z Wang, Y Zhang
(2017), pp. 346-351, ICHSU 2016 : Proceedings of the 3rd International Conference on Advanced High Strength Steel and Press Hardening, Xian, China, E1
A model for quenching and partitioning with press hardening of high strength steel
Z liu, B Zhu, Y Zhang, H Ding, M Cai, Y Wang, B Rolfe
(2017), pp. 309-316, Hot sheet metal forming of high-performance steel CHS² 2017 CHS2 conference proceedings, Atlanta, Georgia, E1
Time series analysis of tool wear in sheet metal stamping using acoustic emission
V Shanbhag, M Pereira, B Rolfe, N Arunachalam
(2017), Vol. 896, pp. 1-8, IDDRG 2017 : Materials modelling and testing for sheet metal forming : Proceedings of the 36th IDDRG Conference 2017, Munich, Germany, E1
Deformation in micro roll forming of bipolar plate
P Zhang, M Pereira, B Rolfe, D Wilkosz, M Weiss
(2017), Vol. 896, pp. 1-8, IDDRG 2017 : Materials modelling and testing for sheet metal forming : Proceedings of the 36th IDDRG 2017 Conference, Munich, Germany, E1
B Voss, M Pereira, B Rolfe, M Doolan
(2017), Vol. 896, pp. 1-8, IDDRG 2017: Materials Modelling and Testing for Sheet Metal Forming : Proceedings of the International Deep Drawing Research Group, Munich, Germany, E1
Prototyping of automotive components with variable width and depth
B Abeyrathna, B Rolfe, J Harrasser, A Sedlmaier, R Ge, L Pan, M Weiss
(2017), Vol. 896, pp. 1-8, IDDRG 2017 : Materials modeling and testing for sheet metal forming : Proceedings of the 36th IDDRG 2017 Conference, Munich, Germany, E1
The influence of UV level and exposure time on the performance of the epoxy based adhesive material
S Khaleel, R Al-Ameri, B Rolfe, T Hilditch
(2017), pp. 31-37, ISCA 2017 : Proceedings of The First MoHESR and HCED Iraqi Scholars Conference in Australasia 2017, Melbourne, Vic., E1
S Khaleel, B Rolfe, R Al-Ameri, T Hilditch
(2017), Vol. 6, pp. 18-22, APFIS2017 : Proceedings of the 6th Asia-Pacific Conference on FRP in Structures, Singapore, E1
The Effect of High Frequency Pulse on the Discharge Probability in Micro EDM
Y Liu, Y Qu, W Zhang, F Ma, Z Sha, Y Wang, B Rolfe, S Zhang
(2017), Vol. 281, pp. 1-7, IWMSME 2017 : Proceedings of the 1st International Workshop on Materials Science and Mechanical Engineering, Kunming, China, E1
M Cai, H Pan, H Huang, H Ding, Y Zhang, B Rolfe, P Hodgson
(2017), pp. 85-92, CHS2 2017 : Proceedings of the 6th International Conference Hot Steel Metal Forming of High-Performance Steel, Atlanta, Ga., E1
M Izadi, A Farzaneh, I Gibson, B Rolfe
(2017), pp. 1058-1067, SFF 2017 : Proceedings of the 28th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, Austin, Texas, E1
Understanding wear conditions during hot stamping
M Pereira, A Abdollahpoor, B Rolfe, P Zhang, C Wang
(2016), pp. 585-590, Advanced High Strength Steel and Press Hardening: Proceedings of the 2nd International Conference (ICHSU2015), Changsha, China, B1
Experimental investigation of tailored hot stamping parts
A Abdollahpoor, M Pereira, B Rolfe, Z Wang, Y Zhang
(2016), pp. 443-448, Advanced High Strength Steel and Press Hardening: Proceedings of the 2nd International Conference (ICHSU2015), Changsha, China, B1
Advances in tailored hot stamping - innovations in material and local patchwork topology
B Rolfe, A Abdollahpoor, M Pereira, H Kong, E Pavlina, M Cai, D Fabijanic, K Hu, R Han, L Pan, Y Bi, Z Wang, Y Zhang
(2016), pp. 413-418, dvanced High Strength Steel and Press Hardening: Proceedings of the 2nd International Conference (ICHSU2015), Changsha, China, B1
A novel approach to developing hot stamping parts with tailored properties
K Hu, R Han, E Pavlina, B Rolfe
(2016), pp. 430-435, Advanced high strength steel and press hardening: proceedings of the 2nd international conference (ICHSU2015), Hackensack, N.J., B1-1
A Abdollahpoor, X Chen, M Pereira, N Xiao, B Rolfe
(2016), Vol. 228, pp. 125-136, Journal of materials processing technology, Amsterdam, The Netherlands, C1
B Abeyrathna, B Rolfe, P Hodgson, M Weiss
(2016), Vol. 9, pp. 423-434, International Journal of Material Forming, Melbourne, AUSTRALIA, C1
An extension of the flower pattern diagram for roll forming
B Abeyrathna, B Rolfe, P Hodgson, M Weiss
(2016), Vol. 83, pp. 1683-1695, International Journal of Advanced Manufacturing Technology, C1
An inverse routine to predict residual stress in sheet material
A Abvabi, B Rolfe, P Hodgson, M Weiss
(2016), Vol. 652, pp. 99-104, Materials Science and Engineering A, C1
An analytical model for web-warping in variable width flexible roll forming
J Jiao, B Rolfe, J Mendiguren, M Weiss
(2016), Vol. 86, pp. 1541-1555, International Journal of Advanced Manufacturing Technology, C1
A disclination model for twinning and de-twinning of nanotwinned copper
C Xie, Q Fang, L Li, J Chen, M Zhang, Y Liu, B Rolfe
(2016), Vol. 96, pp. 301-309, Philosophical magazine, Abingdon, Eng., C1
O Badr, F Barlat, B Rolfe, M Lee, P Hodgson, M Weiss
(2016), Vol. 80, pp. 334-347, International journal of solids and structures, Oxford, Eng., C1
The effect of sliding speed on the wear of steel-tool steel pairs
P Okonkwo, G Kelly, B Rolfe, M Pereira
(2016), Vol. 97, pp. 218-227, Tribology international, Amsterdam, The Netherlands, C1
C Xie, Q Fang, X Liu, P Guo, J Chen, M Zhang, Y Liu, B Rolfe, L Li
(2016), Vol. 82, pp. 44-61, International Journal of Plasticity, C1
X Chen, N Xiao, M Cai, D Li, G Li, G Sun, B Rolfe
(2016), Vol. 47, pp. 4732-4740, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1
Structure-property relationships of elementary bamboo fibers
E Castanet, Q Li, L Dumée, C Garvey, R Rajkhowa, J Zhang, B Rolfe, K Magniez
(2016), Vol. 23, pp. 3521-3534, Cellulose, C1
Flexible roll forming of an automotive component with variable depth
B Abeyrathna, B Rolfe, L Pan, R Ge, M Weiss
(2016), pp. 1-12, AMPT 2015 : Notes from the Materials and Processing Technologies Conference, Madrid, Spain, E1
S Chandrasekaran, J Long, Y Wang, J Nomani, Q Zhao, Z Jiang, R Geng, B Rolfe
(2016), pp. 1-11, ASEE 2016. Proceedings of the 2016 American Society for Engineering Education International Forum, New Orleans. LA., E1
Comparison of ductile damage models during scratch tests - a numerical study
A Mostaani, M Pereira, B Rolfe
(2016), pp. 126-133, BALTTRIB' 2015: Proceedings of the 8th International Scientific Conference, Kaunas, Lithuania, E1
Flexible roll forming of automotive components from ultra high strength steel
B Abeyrathna, A Abvabi, B Rolfe, R Taube, M Weiss
(2016), pp. 1-9, IDDRG 2016: Challenges in Forming High-Strength Sheets : Proceedings of the International Deep Drawing Research Group, Linz, Austria, E1
Forming parts over small radii
S Hazra, D Hughes, M Pereira, B Rolfe
(2016), Vol. 734, pp. 1-4, NUMISHEET 2016: Proceedings of the 10th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Bristol, England, E1
Numerical analysis of the flexible roll forming of an automotive component from high strength steel
B Abeyrathna, A Abvabi, B Rolfe, R Taube, M Weiss
(2016), Vol. 159, pp. 1-9, IDDRG 2016 : Challenges in Forming High-Strength Sheets : Proceedings of the IOP Conference Series Materials Science and Engineering, Linz, Austria, E1
A Research on Selective Carburization Process of Low Carbon Steel
R Han, K Hu, B Rolfe, E Pavlina
(2016), pp. 70-74, ICHSU 2015 : Advanced High Strength Steel and Press Hardening : Proceedings of the 2nd International Conference, Changsha, China, E1-1
Forming of high strength titanium sheet at room temperature
O Badr, B Rolfe, P Hodgson, M Weiss
(2015), Vol. 66, pp. 618-626, Materials and Design, C1
J Jiao, B Rolfe, J Mendiguren, M Weiss
(2015), Vol. 90, pp. 228-238, International Journal of Mechanical Sciences, C1
On the definition of an kinematic hardening effect graph for sheet metal forming process simulations
J Mendiguren, B Rolfe, M Weiss
(2015), Vol. 92, pp. 109-120, International Journal of Mechanical Sciences, C1
Robustness of the tailored hot stamping process
B Rolfe, A Abdollahpoor, X Chen, M Pereira, N Xiao
(2015), Vol. 1063, pp. 177-180, Advanced materials research, Zurich, Switzerland, C1
M Cai, X Wei, B Rolfe, P Hodgson
(2015), Vol. 641, pp. 297-304, Materials science and engineering A, Amsterdam, The Netherlands, C1
Micromechanical modelling of bending under tension forming behaviour of dual phase steel 600
X Wei, S Asgari, J Wang, B Rolfe, H Zhu, P Hodgson
(2015), Vol. 108, pp. 72-79, Computational materials science, Amsterdam, The Netherlands, C1
The influence of residual stress on a roll forming process
A Abvabi, B Rolfe, P Hodgson, M Weiss
(2015), Vol. 101-102, pp. 124-136, International journal of mechanical sciences, Amsterdam, The Netherlands, C1
Effects of microstructure on the variation of the unloading behavior of DP780 steels
E Pavlina, C Lin, J Mendiguren, B Rolfe, M Weiss
(2015), Vol. 24, pp. 3737-3745, Journal of materials engineering and performance, Berlin, Germany, C1
Constitutive analysis of hot deformation behavior of a Ti6Al4V alloy using physical based model
P Souza, H Beladi, R Singh, B Rolfe, P Hodgson
(2015), Vol. 648, pp. 265-273, Materials science and engineering A, Amsterdam, The Netherlands, C1
Improvement of accuracy in a free bending test for material characterization
J Mendiguren, A Abvabi, B Rolfe, M Weiss
(2015), Vol. 103, pp. 288-296, International journal of mechanical sciences, Oxford, Eng., C1
The crash behaviour of hot stamped components - the effect of tailoring conditions
A Abdollahpoor, X Chen, M Pereira, N Xiao, B Rolfe
(2015), pp. 591-599, CHS2 2015 : 5th International Conference on Hot Sheet Metal Forming of High-Performance Steel, Toronto, Canada, E1
Understanding temperature and contact pressure in hot stamped channels
B Rolfe, P Zhang, A Abdollahpoor, C Wang, M Pereira
(2015), pp. 793-800, CHS2 2015 : 5th International Conference on Hot Sheet Metal Forming of High-Performance Steel, Toronto, Canada, E1
Softening behavior of Ti6Al4V alloy during hot deformation
P Souza, H Beladi, R Singh, B Rolfe, P Hodgson
(2015), pp. 407-412, Proceedings of the 7th International Light Metals Technology Conference 2015, Port Elizabeth, South Africa, E1
An audio signal based model for condition monitoring of sheet metal stamping process
I Ubhayaratne, Y Xiang, M Pereira, B Rolfe
(2015), pp. 1267-1272, ICIEA 2015: Proceedings of the 10th IEEE Conference on Industrial Electronics and Applications, Auckland, New Zealand, E1
An experimental investigation of edge strain and bow in roll forming a V-section
B Abeyrathna, B Rolfe, P Hodgson, M Weiss
(2014), Vol. 773-774, pp. 153-159, Materials science forum, Durnten-Zurich, Switzerland, C1
Temperature conditions during 'cold' sheet metal stamping
M Pereira, B Rolfe
(2014), Vol. 214, pp. 1749-1758, Journal of Materials Processing Technology, C1
Finite element analysis of residual stresses in metallic coatings through a compound casting
Y Liu, Y Chen, B Rolfe, C Yang
(2014), Vol. 553, pp. 48-53, Applied mechanics and materials, Stafa-Zurich, Switzerland, C1
Springback investigation in roll forming of a V-section
A Abvabi, J Mendiguren, B Rolfe, M Weiss
(2014), Vol. 553, pp. 643-648, Applied mechanics and materials, Pfaffikon, Switzerland, C1
C Wang, H Ding, M Cai, B Rolfe
(2014), Vol. 610, pp. 65-75, Materials Science and Engineering A, Amsterdam, Netherlands, C1
C Wang, H Ding, M Cai, B Rolfe
(2014), Vol. 610, pp. 436-444, Materials science and engineering a, Amsterdam, Netherlands, C1
Microstructure modeling and prediction of the mechanical properties of advanced high strength steels
A Asgari, B Rolfe, P Hodgson
(2014), Vol. 11, pp. 1-11, International journal of computational methods, Singapore, C1
J Marnette, B Rolfe, P Hodgson, M Weiss
(2014), pp. 452-455, NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Melbourne, Australia, E1
O Badr, B Rolfe, P Hodgson, M Weiss
(2014), pp. 872-875, NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Melbourne, Australia, E1
O Badr, B Rolfe, P Hodgson, M Weiss
(2014), pp. 876-879, NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Melbourne, Australia, E1
The effect of tooling design parameters on web-warping in the flexible roll forming of UHSS
J Jiao, B Rolfe, J Mendiguren, L Galdos, M Weiss
(2014), pp. 892-895, NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Melbourne, Australia, E1
Effect of temper rolling on final shape defects in a V-section roll forming process
A Abvabi, B Rolfe, P Hodgson, M Weiss
(2014), pp. 896-899, NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Melbourne, Australia, E1
Sensitivity analysis of roll load, torque and material properties in the roll forming process
B Abeyrathna, B Rolfe, P Hodgson, M Weiss
(2014), pp. 900-903, NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Melbourne, Australia, E1
Characterization of a dual phase steel using tensile and free bending tests
J Mendiguren, S Hanselmanb, E Atzemac, P Hodgson, B Rolfe, M Weiss
(2014), pp. 659-662, NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Melbourne, Australia, E1
Blind extraction of cyclostationary signal from convolutional mixtures
Y Xiang, I Ubhayaratne, Z Yang, B Rolfe, D Peng
(2014), pp. 857-861, ICIEA 2014 : Proceedings of the 2014 9th IEEE Conference on Industrial Electronics and Applications, Hangzhou, China, E1
Investigation of the tailored hot stamping components under crash loading
A Abdollahpoor, X Chen, M Pereira, N Xiao, B Rolfe
(2014), pp. 151-159, Innovative Materials and Structures Technologies: METECH'14 Metallurgical Materials and Structure Conference Proceedings, Istanbul, Turkey, E1
Simulation of springback and microstructural analysis of dual phase steels
T Kalyan, X Wei, J Mendiguren, B Rolfe
(2014), pp. 713-716, NUMISHEET 2014 : Proceedings of the 9th International Conference and Workshop on Numerical Simulation 3D Sheet Metal Forming Processes, Melbourne, Victoria, E1
Effect of forming sequence on product straightness and springback in roll forming
B Abeyrathna, B Rolfe, P Hodgson, M Weiss
(2014), pp. 153-158, IDDRG 2014 : Innovations for the sheet metal industry : Proceedings of the International Deep Drawing Research Group Conference 2014, Paris, France, E1
The effect of the die radius profile accuracy on wear in sheet metal stamping
M Pereira, M Weiss, B Rolfe, T Hilditch
(2013), Vol. 66, pp. 44-53, International journal of machine tools and manufacture, Amsterdam, The Netherlands, C1
Product defect compensation by robust optimization of a cold roll forming process
J Wiebenga, M Weiss, B Rolfe, A Van Den Boogaard
(2013), Vol. 213, pp. 978-986, Journal of materials processing technology, Amsterdam, The Netherlands, C1
A Abvabi, B Rolfe, P Hodgson, M Weiss
(2013), Vol. 554-557, pp. 949-956, Key engineering materials, Stafa-Zurich, Switzerland, C1
Understanding robustness of springback in high strength steels
T de Souza, B Rolfe
(2013), Vol. 68, pp. 236-245, International journal of mechanical sciences, Amsterdam, The Netherlands, C1
O Badr, B Rolfe, P Hodgson, M Weiss
(2013), Vol. 47, pp. 150-161, International journal of materials and product technology, Geneva, Switzerland, C1
R Tafti, H Naeini, M Tehrani, B Rolfe, M Weiss
(2013), Vol. 47, pp. 33-45, International journal of materials and product technology, Geneva, Switzerland, C1
Investigation on forming limit properties of dual phase steel
L Pan, B Rolfe, A Asgari, M Weiss, Z Zhang
(2013), pp. 850-856, NUMIFORM 2013 : Proceedings of the 11th International Conference on Numerical Methods in Industrial Forming Processes, Shenyang, China, E1
O Badr, B Rolfe, P Hodgson, M Weiss
(2013), pp. 513-519, NUMIFORM 2013 : Proceedings of Numerical Methods in Industrial Forming Processes 2013 international conference, Shenyang, China, E1
A first step towards in-line shape compensation for roll forming applications
B Abeyrathna, B Rolfe, P Hodgson, M Weiss
(2013), pp. 93-97, IDDRG 2013 : Proceedings of the 2013 International Deep-Drawing Research Group annual conference, Zurich, Switzerland, E1
Applying a modified austenite transformation model into a thermo-mechanical model of hot stamping
A Abdollahpoor, X Chen, M Pereira, A Asgari, N Xiao, B Rolfe
(2013), pp. 155-160, IDDRG 2013 : Proceedings of the International Deep-Drawing Research Group. Conference, Zurich, Switzerland, E1
The effect of temperature on sliding wear of steel-tool steel pairs
P Okonkwo, G Kelly, B Rolfe, M Pereira
(2012), Vol. 282-283, pp. 22-30, Wear, Amsterdam, Netherlands, C1
Tool wear in sheet metal stamping
W Yan, M Pereira, B Rolfe
(2012), Vol. 421, pp. 750-753, Advanced materials research, Stafa-Zurich, Switzerland, C1
Wear at the die radius in sheet metal stamping
M Pereira, W Yan, B Rolfe
(2012), Vol. 274-275, pp. 355-367, Wear, Amsterdam, Netherlands, C1
Effect of residual stress on the bending of aluminium
M Weiss, B Rolfe, P Hodgson, C Yang
(2012), Vol. 212, pp. 877-883, Journal of materials processing technology, Lausanne, Switzerland, C1
Modern enhancements in teaching design theories to mechanical engineering students
A Asgari, C Yang, B Rolfe
(2012), Vol. 18, pp. 25-34, Australasian journal of engineering education, Sydney, N.S.W., C1
A numerical approach to robust in-line control of roll forming processes
J Wiebenga, M Weiss, B Rolfe, T Van Den Boogaard
(2012), pp. 727-730, Steel research international, Chichester, Eng., C1-1
S Datta, S Hanafin, B Rolfe, T de Souza
(2012), pp. 779-784, VRAP 2011 : Proceedings of the 5th International Conference on Advanced Research and Rapid Prototyping, Leiria, Portugal, E1
A systems approach to shape and topology optimisation of mechanical structures
K Fiedler, B Rolfe, A Asgari, T de Souza
(2012), pp. 145-154, OPTI 2012 : Computer aided optimum design in engineering XII, New Forest, England, E1
Effect of roller leveling on the bending behaviour of aged steel strip
J Marnette, B Rolfe, P Hodgson, M Weiss
(2012), pp. 699-702, Metal Forming 2012 : Proceedings of the 14th International Conference on Metal Forming, Krakow, Poland, E1
Effect of tensile pre-strain on bending and unloading of automotive steels
M Weiss, A Kupke, B Rolfe
(2012), pp. 409-415, IDDRG 2012 : Lightweighting, possibilities & challenges : Proceedings of the 2012 International Deep Drawing Research Group Conference, Mumbai, India, E1-1
Envelope tesselation with stochastic rotation of 4-fold penttiles
S Hanafin, S Datta, B Rolfe, M Hobbs
(2012), pp. 253-262, CAADRIA 2012 : Beyond codes and pixels : Proceedings of the 17th International Conference on Computer-Aided Architectural Design Research in Asia, Chennai, India, E1-1
Numerical model accuracy of solid and shell elements when simulating the roll forming process
J Jiao, B Rolfe, M Weiss
(2012), pp. 1-7, AMPT 2012 : Proceedings of the 15th Advances in Materials & Processing Technologies Conference, Wollongong, New South Wales, E1
Effect of thermal treatment on the bending properties of pre-strained carbon steel
M Weiss, E Hemmerich, P Hodgson, B Rolfe
(2011), Vol. 528, pp. 4528-4536, Materials science and engineering A, Lausanne, Switzerland, C1
E Hemmerich, B Rolfe, P Hodgson, M Weiss
(2011), Vol. 528, pp. 3302-3309, Materials science and engineering a, Lausanne, Switzerland, C1
L Ma, B Rolfe, Q Yang, C Yang
(2011), Vol. 79, pp. 131-158, Computer modeling in engineering and sciences, Palmdale, Calif., C1
Effects of temperature in relation to sheet metal stamping
P Okonkwo, M Pereira, G Kelly, B Rolfe
(2011), pp. 114-118, MEQAPS 2011 : Proceedings of the 4th International Conference on Manufacturing Engineering, Quality and Production Systems, Barcelona, Spain, E1
Tree façades : generative modelling with an axial branch rewriting system
S Hanafin, S Datta, B Rolfe
(2011), pp. 175-184, CAADRIA 2011 : Circuit Bending, Breaking and Mending : Proceedings of the 16th International Conference on Computer-Aided Architectural Design Research in Asia, Newcastle, N. S. W., E1
A new solution method for homogenization of effective properties of electromagnetic honeycombs
L Ma, B Rolfe, Q Yang, C Yang
(2010), Vol. 443, pp. 551-556, Key engineering materials, Aedermannsdorf, Switzerland, C1
T de Souza, B Rolfe
(2010), Vol. 52, pp. 1756-1766, International journal of mechanical sciences, Amsterdam, The Netherlands, C1
Deformation and frictional heating in relation to wear in sheet metal stamping
M Pereira, P Okonkwo, W Yan, B Rolfe
(2010), Vol. 81, pp. 713-716, Steel research international, Weinheim, Germany, C1
On the effective mechanical properties of fluid-saturated composites : a homogenization approach
L Ma, B Rolfe, Q Yang, C Yang
(2010), Vol. 654-656, pp. 2273-2276, Materials science forum, Stafa-Zurich, Switzerland, C1
Sliding distance, contact pressure and wear in sheet metal stamping
M Pereira, W Yan, B Rolfe
(2010), Vol. 268, pp. 1275-1284, Wear, Amsterdam, The Netherlands, C1
T Matuszyk, M Cardew-Hall, B Rolfe
(2010), Vol. 26, pp. 370-380, Robotics and computer-integrated manufacturing, Oxford, England, C1
The indentation behaviour of carbon fibre composite tubes-experiments & modelling
R Sudharsan, B Rolfe, P Hodgson
(2010), Vol. 654-656, pp. 2616-2619, Materials science forum, Stafa-Zurich, Switzerland, C1
Effect of skin passing on bending and tension: an experimental investigation
M Weiss, C Yang, B Rolfe
(2010), Vol. 81, pp. 789-792, Steel research international, London, Eng., C1-1
Numerical simulations on warm forming of stainless steel with trip-effect
X Wang, C Yang, B Rolfe
(2010), pp. 595-601, NUMIFORM 2010 : Proceedings of the 10th International Conference on Numerical Methods in Industrial Forming Processes, Pohang, Republic of Korea, E1
The effect of skin passing on the material behavior of metal strip in pure bending and tension
M Weiss, W Ryan, B Rolfe, C Yang
(2010), pp. 896-902, NUMIFORM 2010 : Proceedings of the 10th International Conference on Numerical Methods in Industrial Forming Processes, Pohang, Republic of Korea, E1
Modelling the side impact of carbon fiber tubes
R Sudharsan, B Rolfe, P Hodgson
(2010), pp. 1-10, Proceedings of the joint 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics, 19-23 July, Sydney, New South Wales, Sydney, New South Wales, E1
Contact pressure evolution at the die radius in sheet metal stamping
M Pereira, J Duncan, W Yan, B Rolfe
(2009), Vol. 209, pp. 3532-3541, Journal of materials processing technology, Aedermannsdorf, Switzerland, C1
Modeling of advanced high strength steels with the realistic microstructure-strength relationships
S Asgari, P Hodgson, C Yang, B Rolfe
(2009), Vol. 45, pp. 860-886, Computational materials science, Amsterdam, Netherlands, C1
Development of material models to predict the crashworthiness of tubes
R Sudharsan, J Mullins, B Rolfe, P Hodgson
(2009), pp. 1-12, AutoCRC Conference 2009 : Smarter, Safer, Cleaner, Melbourne, Vic., E1
Wear mechanisms in forming of HSS and AHSS
M Weiss, M Pereira, B Rolfe, T Hilditch
(2009), pp. 691-702, IDDRG 2009 : Material property data for more effective numerical analysis : Proceedings of the International Deep-Drawing Research Group 2009 annual conference, Golden, Colorado, E1-1
Multivariate modelling of variability in sheet metal forming
T de Souza, B Rolfe
(2008), Vol. 203, pp. 1-12, Journal of materials processing technology, Aedermannsdorf, Switzerland, C1
Simulation of contact pressure in sheet metal trimming/blanking process
R Rafiee, B Rolfe, W Yan
(2008), Vol. 41-42, pp. 463-468, Advanced materials research, Stafa-Zurich, Switzerland, C1
Statistical analysis of finite element modeling in sheet metal forming and springback analysis
S Asgari, M Pereira, B Rolfe, M Dingle, P Hodgson
(2008), Vol. 203, pp. 129-136, Journal of materials processing technology, Zürich, Switzerland, C1
Multiscale particle-in-cell modelling for advanced high strength steels
S Asgari, P Hodgson, V Lemiale, C Yang, B Rolfe
(2008), Vol. 32, pp. 285-288, Advanced materials research, Stafa-Zurich, Switzerland, C1
Contact pressure evolution and its relation to wear in sheet metal forming
M Pereira, W Yan, B Rolfe
(2008), Vol. 265, pp. 1687-1699, Wear, Amsterdam, The Netherlands, C1
The forming of advanced high strength steels for the automotive industry
B Rolfe, S Asgari, P Hodgson
(2008), Vol. Special issue; 1, pp. 9-18, Steel Research International, Düsseldorf, Germany, C1-1
Contact pressure prediction in sheet metal forming using finite element analysis
M Pereira, W Yan, B Rolfe
(2008), pp. 361-371, IDDRG 2008 : Proceedings of the IDDRG 2008 Conference : Best in class stamping, 16-18 June 2008, Olofström, Sweden, Olofstrom, Sweden, E1
C Yang, Y Zhang, B Rolfe
(2008), pp. 329-333, ICHMM 2008 : Advances in heterogeneous material mechanics, 2008 : proceedings of the second International Conference on Heterogeneous Material Mechanics, June 3-8, 2008, Huangshan, China, Huangshan, China, E1
Energy efficient, fully-connected mesh networks for high speed applications
S Ekanayake, P Pathirana, B Rolfe, M Palaniswami
(2008), pp. 2606-2610, VTC 2008 : IEEE 67th Vehicular Technology Conference, Marina Bay, Singapore, E1
Accuracy and precision assesment of stochastic simulation tools for springback variation
T de Souza, B Rolfe
(2008), pp. 539-544, NUMISHEET 2008 : Proceedings of the 7th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Interlaken, Switzerland, E1
Recent developments in automotive manufacturing using advanced high strength steels
B Rolfe, S Nahavandi, P Hodgson
(2008), pp. 1-16, ICAMT 2008 : Proceedings of the Advances in Manufacturing Technology 2008 international conference, Chennai, India, E1
Multiphase material modelling by multiscale particle-in-cell method
S Asgari, C Yang, P Hodgson, B Rolfe
(2008), pp. 547-550, MMM 2008 : Proceedings of the 4th International Conference on Multiscale Materials Modeling, Tallahassee, Fla., E1
Multiscale particle-in-cell for advanced high strength steels
S Asgari, P Hodgson, B Rolfe
(2008), FMST 2008 : Frontiers in materials science and technology, Brisbane, Queensland, E1-1
Modeling of contact pressure in sheet metal forming
M Pereira, W Yan, B Rolfe
(2007), Vol. 561, pp. 1975-1978, Materials Science Forum, Aedermannsdorf, Switzerland, C1
M Weiss, M Dingle, B Rolfe, P Hodgson
(2007), Vol. 129, pp. 530-537, Journal of engineering materials and technology, New York, N.Y., C1
The effect of clamping sequence on dimensional variability in sheet metal assembly
T Matuszyk, M Cardew-Hall, B Rolfe
(2007), Vol. 2, pp. 161-171, Virtual and physical prototyping, Abingdon, England, C1
Localization with orientation using RSSI measurements: RF map based approach
B Rolfe, S Ekanayake, P Pathirana, M Palaniswami
(2007), pp. 311-316, ISSNIP 2007 Third International Conference on Intelligent Sensors, Sensor Networks and Information Processing, Melbourne, Australia, E1
Modelling factors of square tubes in high speed bending situations
P Collins, J Mullins, B Rolfe, P Hodgson
(2007), pp. 1-6, SAE 2007 World Congress, Detroit, Michigan, USA, E1
Recognition of lubrication defects in cold forging process with a neural network
B Rolfe, Y Frayman, G Kelly, S Nahavandi
(2006), pp. 262-275, Artificial neural networks in finance and manufacturing, Hershey, PA, B1
Elastic bending of steel-polymer-steel (SPS) laminates to a constant curvature
M Weiss, B Rolfe, M Dingle, J Duncan
(2006), Vol. 73, pp. 574-579, Journal of applied mechanics., New York, N.Y., C1
Contact pressure and wear in sheet metal forming - an FEM analysis
M Pereira, W Yan, B Rolfe
(2006), pp. 73-77, SIF 2006 : Conference Proceedings of the International Conference and Exhibition on Structural Integrity and Failure, Sydney, Australia, E1
Adaptive control of the closed loop behaviour of manufacturing processes
T Wilkin, Y Frayman, B Rolfe
(2006), pp. 1-9, 8th biennial ASME conference on engineering systems design and analysis July 4-7, 2006, Torino, Italy, Torino, Italy, E1
S Asgari, P Hodgson, B Rolfe, P Sunter, V Lemiale
(2006), ARNAM 2006 : Proceedings of the 2006 Australian Research Network for Advanced Materials 2006 Annual Workshop, Brisbane, Queensland, E1-1
Free-form feature representation and comparison
D Ferrari, G West, B Rolfe, M Cardew-Hall
(2006), Vol. 1, pp. 545-554, Proceedings of the ASME 2006 32nd International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Philadelphia, Pennsylvania, E1-1
Sheet forming simulation and springback prediction for AHSS automotive components
M Pereira, A Asgari, T de Souza, B Rolfe, M Dingle, P Hodgson
(2005), pp. 51-62, Copper for the 21st century : proceedings of the conference held September 25-28, 2005 Pittsburgh, Pennsylvania USA, Pittsburgh, USA, E1
A loop-shaping approach to intelligent control
Y Frayman, B Rolfe
(2005), pp. 103-108, Proceedings of the second IASTED International Conference on Biomedical Engineering : February 16-18, 2004, Innsbruck, Austria, Innsbruck, Austria, E1
M Weiss, B Rolfe, M Dingle, P Hodgson
(2004), Vol. 2, pp. 445-449, Steel grips, Germany, C1
Using geometric shape variations to create an inverse model for a sheet metal process
B Rolfe, M Cardew-Hall, S Abdallah, G West
(2003), Vol. 217, pp. 1665-1675, Proceedings of the Institution of Mechanical Engineers. Part B, Journal of engineering manufacture, London, England, C1
A shape error metric for sheet metal forming and its application to springback
B Rolfe, M Cardew-Hall, S Abdallah, G West
(2003), Vol. 125, pp. 468-475, Journal of manufacturing science and engineering, New York, N.Y., C1
Analysis of stamping production data with view towards quality management
B Rolfe, Y Frayman, G Webb, P Hodgson
(2003), pp. 1-15, ICME 2003 Conference proceedings, 13-15 Oct., 2003, Carlton Crest Hotel, Melbourne Australia., Melbourne, Victoria, Australia, E1
Development of touchscreen fault recording for an automotive press shop
G Cheesewright, M Dingle, B Rolfe, Y Frayman, M Cardew-Hall
(2003), ICME 2003 Conference proceedings, 13-15 Oct., 2003, Carlton Crest Hotel, Melbourne Australia, Melbourne, Australia, E1
Press shop machine analysis and trending
G Cheesewright, M Cardew-Hall, P Hodgson, B Rolfe, Y Frayman
(2003), pp. 1-9, ICPR-17 : Electronic proceedings the 17th International Conference on Production Research, Blacksburg, Va., E1
Improving the prediction of the roll separating force in a hot steel finishing mill
Y Frayman, B Rolfe, P Hodgson, G Webb
(2003), pp. 1-12, IPMM 2003 : Intelligence in a small materials world : selected papers from the Fourth International Intelligent Processing and Manufacturing of Materials Conference, Sendai, Japan, E1-1
Fault detection in a cold forging process through feature extraction with a neural network
B Rolfe, Y Frayman, P Hodgson, G Webb, G Kelly
(2002), pp. 155-159, Artificial intelligence and applications: proceedings of the second IASTED Conference, Malaga, Spain, E1
Predicting the rolling force in hot steel rolling mill using an ensemble model
Y Frayman, B Rolfe, P Hodgson, G Webb
(2002), pp. 143-148, Artificial intelligence and applications: proceedings of the second IASTED International Conference, Malaga, Spain, E1
Solving regression problems using competitive ensemble models
Y Frayman, B Rolfe, G Webb
(2002), pp. 511-522, AI 2002 : Advances in artificial intelligence : proceedings of the 15th Australian Joint Conference on Artificial Intelligence, Canberra, Australia, E1
Improving an inverse model of sheet metal forming by neural network based regression
Y Frayman, B Rolfe, G Webb
(2002), pp. 1-12, Proceedings of the 2002 ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Montreal, Canada, E1
Geometric shape errors in forging: developing a metric and an inverse model
B Rolfe, M Cardew-Hall, S Abdallah, G West
(2001), Vol. 215, pp. 1229-1240, Proceedings of the institution of mechanical engineers, part B: journal of engineering manufacture, London, England, C1-1
B Rolfe, M Cardew-Half, S Abdallah, G West
(1999), Vol. 2, pp. 1017-1022, Proceedings of the 2nd International Conference on Intelligent Processing and Manufacturing of Materials, IPMM 1999, E1-1
Toward an automatic method of geometric error analysis
M Cardew-Hall, G West, B Rolfe
(1997), Vol. 5, Proceedings of the ASME Design Engineering Technical Conference, E1-1
Funded Projects at Deakin
Australian Competitive Grants
Nodal Power Saving for Disconnected Ad Hoc Sensor Networks
Prof Pubudu Pathirana, Prof Bernard Rolfe, Dr Alan Wong
ARC - Discovery Projects
- 2008: $90,133
- 2007: $88,369
- 2006: $81,520
Developing Light Weight Automotive Structures
Prof Peter Hodgson, Prof Michael Cardew-Hall, Prof Elena Pereloma, Prof Bernard Rolfe, Dr Ilana Timokhina
ARC_DUAPAI2 ARC_Deakin University Australian Postgraduate Award Industry Second, ARC_DUAPAI ARC_Deakin University Australian Postgraduate Award Industry, ARC Linkage - Projects Rnd 2 APAI APDI
- 2009: $25,364
- 2008: $50,160
- 2007: $78,047
- 2006: $182,166
- 2005: $176,747
- 2004: $87,723
Developing Intelligent Systems for Manufacturing Control
Dr Yakov Frayman, Prof Bernard Rolfe
ARC - Discovery Projects
- 2006: $63,885
Design Strategy for Cold Roll Formed Products
Prof Peter Hodgson, Prof Bernard Rolfe, Dr Richard Yang
ARC Linkage - Projects Rnd 2 APAI
- 2011: $40,462
- 2010: $79,668
- 2009: $78,050
- 2008: $38,250
Reducing tool wear through novel surface treatments and improved lubrication
Prof Peter Hodgson, Prof Bernard Rolfe, Dr Wenyi Yan, Dr Georgina Kelly, Mr Paul Okonkwo
ARC Linkage - Projects Rnd 2 APAI APDI, ARC_DUAPAI ARC_Deakin University Australian Postgraduate Award Industry
- 2012: $13,611
- 2010: $63,321
- 2009: $148,643
- 2008: $150,898
- 2007: $63,766
Flexible roll forming of advanced high strength steel sheet
Prof Peter Hodgson, Prof Matthew Barnett, Prof Bernard Rolfe, Dr Richard Yang
ARC Linkage - Projects Rnd 1, Linkage PhD student
- 2014: $111,102
- 2013: $75,490
- 2012: $103,848
Developing an environmentally friendly, low cost solution to reduce wear and improve productivity in metal forming
Prof Bernard Rolfe, Prof Peter Hodgson, Prof Maria Forsyth, Prof Yong Xiang, Dr Matthew Doolan, Dr Michael Pereira
ARC Linkage - Projects Rnd 1
- 2014: $114,889
- 2013: $104,207
- 2012: $163,652
ARC Research Hub for Transforming Australia's Manufacturing Industry through High Value Additive Manufacturing
Prof Xinhua Wu, Prof Peter Hodgson, Prof Christopher Davies, Dr Wenyi Yan, Dr Matthew Dargusch, Prof Bernard Rolfe, Prof Lyndon Edwards, Mr Damien Miller, Mr Gavin Becker, Emilie Herny, Robert Hobbs, Dr Roger Lumley, Thomas Hawkes, Prof Daniel Fabijanic, Dr Andrey Molotnikov, Dr Paul Rometsch, Prof Huanting Wang, Dr Anna Paradoswka, Dr Chao Chen, Dr Mark Richardson
ARC Industrial Transformation Research Hubs
- 2019: $100,000
- 2018: $150,000
- 2017: $140,000
- 2016: $140,000
- 2015: $130,000
Micro-roll forming of metal bipolar plates for fuel cells
Prof Peter Hodgson, A/Prof Matthias Weiss, Prof Bernard Rolfe, Henry Wolfkamp, Mr Richard Taube, Dr Daniel Wilkosz
ARC Linkage - Projects
- 2018: $26,662
- 2017: $68,298
- 2016: $82,817
- 2015: $40,716
P4 Hot Stamping Light Alloys ITTC ATLAS
Prof Bernard Rolfe, A/Prof Matthias Weiss, Prof Matthew Barnett, Dr Mark Easton, Mr Richard Taube, Richard Axe, Paul Sanders, Marion Merklein
ARC Industrial Transformation Training Centres
- 2020: $15,649
- 2019: $84,642
- 2018: $84,642
- 2017: $84,642
P11 Multi Material Design Solutions ITTC ATLAS
Prof Bernard Rolfe, A/Prof Matthias Weiss, Dr Matthew Doolan, Nia Harrison, Mr Richard Taube
ARC Industrial Transformation Training Centres
- 2020: $15,649
- 2019: $84,642
- 2018: $84,642
- 2017: $84,642
P7 Production of Longitudinal Components by Combining Flexible Roll Forming and Free Forming ITTC ATLAS
A/Prof Matthias Weiss, Prof Bernard Rolfe, Dr Matthew Doolan, Mr Richard Taube, Henry Wolfkamp, Albert Sedlmaier, Brian Oxley
ARC Industrial Transformation Training Centres
- 2020: $15,648
- 2019: $84,642
- 2018: $84,642
- 2017: $84,642
Metal folding fundamentals to shape new corrugated building products
Prof Bernard Rolfe, A/Prof Matthias Weiss, Prof Peter Hodgson, Dr Matthew Dingle
ARC Linkage - Projects
- 2023: $38,649
- 2022: $105,707
- 2021: $136,920
Fundamental research advancing remanufacturing with a 3D printing technique
A/Prof Wenyi Yan, Prof Bernard Rolfe, Prof Aijun Huang
ARC - Discovery Projects
- 2023: $25,000
Other Public Sector Funding
Innovation Connections - Design and Development of 3 Prototype Electric Trucks
Prof Abbas Kouzani, Dr Michael Norton, Prof Bernard Rolfe, Mr Gary Owen
Department of Industry, Innovation and Science
- 2017: $48,210
Materials Development and Design for Electrification and Automation
Prof Bernard Rolfe, A/Prof Matthias Weiss, Prof Russell Varley, Prof Minoo Naebe, Prof Peter Hodgson, Prof Matthew Barnett, Dr Thomas Dorin, Dr Kazem Ghabraie
DIIS Automotive Engineering Graduate Program - ABN 74 599 608 295
- 2022: $60,676
- 2021: $101,128
- 2019: $242,706
Next Generation Carbon Fibre Reinforced Compostite Tray Body.
Prof Russell Varley, Mr Rodney Macaulay, A/Prof Yanan Wang, Dr Johannes Reiner, Prof Bernard Rolfe, Dr Mandy De Souza
Department of Industry, Innovation and Science
- 2021: $50,000
Additive Manufacturing Design Thinking for the RAAF
Prof Bernard Rolfe, Mr Matt Jennings, Prof Jennifer Loy
DoD Grant - Research - Department of Defence
- 2021: $88,914
Next Generation Carbon Fibre Reinforced Tray Body (IC Phase 2).
Mr Andreas Hendlmeier, Dr Jack Fu, Prof Russell Varley, Mr Rodney Macaulay, A/Prof Yanan Wang, Dr Johannes Reiner, Prof Bernard Rolfe
Innovation Connections
- 2022: $50,000
Virtual Trade (Additive Manufacturing) Pilot Program for the RAAF.
Prof Bernard Rolfe, Mr Matt Jennings, Dr Clara Usma-Mansfield
Department of Defence
- 2022: $167,283
Transition Research in Disruptive Technology.
Prof Bernard Rolfe, Mr Matt Jennings
Department of Defence
- 2023: $154,025
- 2022: $38,506
Industry and Other Funding
A multi-scale model of plasticity for magnesium alloys
Prof Matthew Barnett, Prof Bernard Rolfe
VPAC Grant - e-Research Program Grant - Victorian Partnership for Advanced Computing Ltd
- 2006: $5,000
Developing Light Weight Automotive Structures
Prof Peter Hodgson, Prof Michael Cardew-Hall, Prof Elena Pereloma, Prof Bernard Rolfe, Dr Ilana Timokhina
HARD Technologies Pty. Ltd., Ford Motor Company
- 2009: $18,980
- 2008: $45,000
- 2007: $95,761
- 2006: $77,880
- 2005: $7,378
Design Strategy for Cold Roll Formed Products
Prof Peter Hodgson, Prof Bernard Rolfe, Dr Richard Yang
ARD Applied Research & Development (ARD)
- 2011: $20,000
- 2010: $30,000
- 2009: $30,000
Extending the multi-scale capabilities of Xanthus
Prof Bernard Rolfe
VPAC Grant - e-Research Program Grant - Victorian Partnership for Advanced Computing Ltd
- 2007: $12,000
The development of numerical modelling techniques for geometrically complex composite components
Prof Bernard Rolfe, Prof Bronwyn Fox
Carbon Revolution Pty Ltd
- 2010: $3,000
Reducing tool wear through novel surface treatments and improved lubrication
Prof Peter Hodgson, Prof Bernard Rolfe, Dr Wenyi Yan, Dr Georgina Kelly, Mr Paul Okonkwo
HARD Technologies Pty. Ltd.
- 2010: $15,000
- 2009: $15,000
- 2008: $15,000
Flexible roll forming of advanced high strength steel sheet
Prof Peter Hodgson, Prof Matthew Barnett, Prof Bernard Rolfe, Dr Richard Yang
BlueScope Steel Ltd, Wuhan Iron and Steel Company Limited, Australian Rollforming Manufacturers Pty Ltd, data M Sheet Metal Solutions
- 2014: $50,000
- 2013: $60,000
- 2012: $40,000
Developing an environmentally friendly, low cost solution to reduce wear and improve productivity in metal forming
Prof Bernard Rolfe, Prof Peter Hodgson, Prof Maria Forsyth, Prof Yong Xiang, Dr Matthew Doolan, Dr Michael Pereira
Ford Australia
- 2013: $183,000
Cold Stamping of Advanced High Strength Steels
Prof Peter Hodgson, Prof Lingxue Kong, Prof Matthew Barnett, Prof Bernard Rolfe
Wuhan Iron and Steel Company Limited
- 2015: $50,000
- 2013: $50,000
- 2012: $50,000
URP 2012-4089R Flexible roll forming of automotive structures
Prof Bernard Rolfe, A/Prof Matthias Weiss
Ford Australia
- 2016: $21,600
- 2015: $51,092
- 2014: $76,853
- 2013: $42,070
ARC Research Hub for Transforming Australia's Manufacturing Industry through High Value Additive Manufacturing
Prof Xinhua Wu, Prof Peter Hodgson, Prof Christopher Davies, Dr Wenyi Yan, Dr Matthew Dargusch, Prof Bernard Rolfe, Prof Lyndon Edwards, Mr Damien Miller, Mr Gavin Becker, Emilie Herny, Robert Hobbs, Dr Roger Lumley, Thomas Hawkes, Prof Daniel Fabijanic, Dr Andrey Molotnikov, Dr Paul Rometsch, Prof Huanting Wang, Dr Anna Paradoswka, Dr Chao Chen, Dr Mark Richardson
Monash University
- 2019: $81,531
- 2018: $155,919
- 2017: $153,958
- 2016: $142,567
- 2015: $127,065
Micro-roll forming of metal bipolar plates for fuel cells
Prof Peter Hodgson, A/Prof Matthias Weiss, Prof Bernard Rolfe, Henry Wolfkamp, Mr Richard Taube, Dr Daniel Wilkosz
Ford USA Grant - Research
- 2017: $1,695
- 2016: $50,517
- 2015: $43,519
Advanced High Strength Steel Development and Safe Parts Manufacture Project
A/Prof Matthias Weiss, Prof Bernard Rolfe
Wuhan Iron and Steel Company Limited
- 2014: $47,034
Modelling of WISCO¿s Hot Stamping Process
Prof Bernard Rolfe, Dr Michael Pereira, Prof Lingxue Kong, Prof Peter Hodgson
Wuhan Iron and Steel Company Limited
- 2017: $165,000
- 2014: $75,000
Improving WISCO Coatings
Prof Peter Hodgson, Prof Bernard Rolfe, Prof Lingxue Kong
Wuhan Iron and Steel Company Limited
- 2017: $140,000
- 2014: $90,000
ARC Training Centre in Lightweight Automotive Structures (ATLAS)
Dr Chun Hui Wang, Prof Adrian Mouritz, Stuart Bateman, Dr Mark Easton, Prof Milan Brandt, Martin Leary, Prof Michael Cardew-Hall, Dr Paul Compston, Dr Matthew Doolan, Prof Matthew Barnett, Prof Bernard Rolfe, A/Prof Matthias Weiss, Prof Minoo Naebe, Prof Luke Henderson, Mr Richard Taube, Bita Ghaffari, Nia Harrison, Dr Adam Best, Prof Russell Varley, Richard Evans, Henry Wolfkamp, Brian Hughes, Carl De Koning, Richard Axe, Edward Albert, Brian Oxley, Albert Sedlmaier, Prof Anthony Kinloch, Michael Wisnom, Paul Sanders, Marion Merklein
Ford USA Grant - Research
- 2017: $132,087
- 2016: $130,701
Low volume production of longitudinal components by combining flexible roll forming and free forming
A/Prof Matthias Weiss, Prof Bernard Rolfe
Ford USA Grant - Research
- 2017: $66,043
- 2016: $63,147
Innovation Connections - Design and Development of 3 Prototype Electric Trucks
Prof Abbas Kouzani, Dr Michael Norton, Prof Bernard Rolfe, Mr Gary Owen
SEA Automotive
- 2016: $400,000
Flexible Roll Forming of WISCO High Strength Steels
A/Prof Matthias Weiss, Prof Bernard Rolfe, Prof Peter Hodgson, Prof Lingxue Kong
Wuhan Iron and Steel Company Limited
- 2019: $107,963
- 2016: $111,521
Development of Prototype Electric Trucks
Prof Abbas Kouzani, Dr Michael Norton, Prof Bernard Rolfe
SEA Automotive
- 2017: $21,000
Design and Development of 3 Prototype Electric Trucks
Prof Abbas Kouzani, Dr Michael Norton, Prof Bernard Rolfe
SEA Automotive
- 2017: $416,408
P4 Hot Stamping Light Alloys ITTC ATLAS
Prof Bernard Rolfe, A/Prof Matthias Weiss, Prof Matthew Barnett, Dr Mark Easton, Mr Richard Taube, Richard Axe, Paul Sanders, Marion Merklein
Ford USA Grant - Research
- 2020: $4,000
- 2019: $20,000
- 2018: $20,000
- 2017: $20,000
P11 Multi Material Design Solutions ITTC ATLAS
Prof Bernard Rolfe, A/Prof Matthias Weiss, Dr Matthew Doolan, Nia Harrison, Mr Richard Taube
Ford USA Grant - Research
- 2020: $4,000
- 2019: $20,000
- 2018: $20,000
- 2017: $20,000
Punch Shear Model for Multilayer Film
Prof Bernard Rolfe, Dr Shunying Zhang
Plantic Technologies Ltd
- 2018: $4,800
- 2017: $5,200
P7 Production of Longitudinal Components by Combining Flexible Roll Forming and Free Forming ITTC ATLAS
A/Prof Matthias Weiss, Prof Bernard Rolfe, Dr Matthew Doolan, Mr Richard Taube, Henry Wolfkamp, Albert Sedlmaier, Brian Oxley
Ford USA Grant - Research
- 2020: $4,000
- 2019: $20,000
- 2018: $20,000
- 2017: $20,000
Metal folding fundamentals to shape new corrugated building products
Prof Bernard Rolfe, A/Prof Matthias Weiss, Prof Peter Hodgson, Dr Matthew Dingle
FormFlow PTY LTD
- 2022: $31,616
- 2021: $32,616
Next Generation Carbon Fibre Reinforced Compostite Tray Body.
Prof Russell Varley, Mr Rodney Macaulay, A/Prof Yanan Wang, Dr Johannes Reiner, Prof Bernard Rolfe, Dr Mandy De Souza
Duratray International Pty Ltd
- 2021: $27,771
- 2020: $27,771
Next Generation Carbon Fibre Reinforced Tray Body (IC Phase 2).
Mr Andreas Hendlmeier, Dr Jack Fu, Prof Russell Varley, Mr Rodney Macaulay, A/Prof Yanan Wang, Dr Johannes Reiner, Prof Bernard Rolfe
Duratray International Pty Ltd
- 2022: $28,005
- 2021: $28,005
Student application - Measurement of concurrent interphase precipitation and phase transformation in Ti-Mo steels by Small Angle Neutron Scattering (SANS)
Prof Peter Hodgson, Mr Baoqi Dong, Dr Thomas Dorin, Dr Ilana Timokhina, Prof Bernard Rolfe
AINSE Grant - Postgraduate Research Award
- 2023: $9,000
- 2022: $8,250
Intelligent in-line flexible roll-forming shape control for Electric Vehicle (EV) component production.
Prof Bernard Rolfe, A/Prof Matthias Weiss, Dr Jingsi Jiao
Baosteel Australia Joint Research & Development Centre (Uni of Qld)
- 2023: $50,000
Other Funding Sources
Dynamic Texture Measurement Facility - Not DU Led
Prof Elena Pereloma, Prof Matthew Barnett, Prof Hua Liu, Prof Peter Hodgson, Dr Andrew Minett, Prof Kiet Tieu, Prof John Norrish, Prof Rian Dippenaar, Prof Buddhima Indraratna, Dr David Wexler, Dr Frank Barbaro, Dr Konstantin Konstantinov, A/Prof Zheng Jiang, A/Prof Guoxiu Wang, Prof Druce Dunne, A/Prof Nicole Stanford, Dr Hossein Beladi, Dr Zai Guo, Dr Azdiar Gazder, Dr Dominic Phelan, Prof Bernard Rolfe
ARC LIEF - Linkage Infrastructure Equipment & Facilities Program
- 2010: $5,000
Development of a lightweight modular mixed material vehicle platform - C2-23
Dr Matthew Dingle, A/Prof Tim Hilditch, Prof Bernard Rolfe, Mr Frank Will
CRC_AAT Cooperative Research Centre for Advanced Automotive Technology Ltd
- 2012: $255,554
- 2011: $178,449
- 2010: $122,815
Lightweight Vehicle Structures, C1-802
Prof Bernard Rolfe, Prof Lingxue Kong
CRC_AAT Cooperative Research Centre for Advanced Automotive Technology Ltd
- 2012: $222,325
- 2011: $63,750
3-101 Pickup Canopy Development
Prof Bernard Rolfe, Dr Kevin Magniez, A/Prof Tim Hilditch, Dr Tim De Souza
AutoCRC Ltd
- 2015: $13,979
- 2014: $81,685
- 2013: $149,617
Flexible forming facility for low cost light weight applications
Prof Peter Hodgson, A/Prof Matthias Weiss, Prof Bernard Rolfe, Prof Jeong-Whan Yoon, A/Prof Nicole Stanford, Dr Shankar Kalyanasundaram, Dr Paul Compston, Prof Liangchi Zhang, A/Prof Zheng Jiang, Dr Dongbin Wei, Dr Matthew Dargusch, Dr Gui Wang, Dr Daniel Liang
Australian National University (CAT8), ARC LIEF - Linkage Infrastructure Equipment & Facilities Program
- 2014: $470,000
3-105 Flexible Roll Forming of a Component Section from AHSS
Prof Bernard Rolfe, A/Prof Matthias Weiss
AutoCRC Ltd
- 2014: $147,936
- 2013: $30,583
Tool Wear Prediction Model on the Stamping of AHSS and UHSS
Prof Bernard Rolfe, A/Prof Matthias Weiss, Dr Michael Pereira
AutoCRC Ltd
- 2015: $43,209
- 2014: $127,464
- 2013: $15,492
Microstructure evolution and the weld line in hot stamping - Masters Scholarship
Prof Bernard Rolfe, Mr Minghui Cai, Dr Erik Pavlina, Mr Hui Kong
AutoCRC Ltd
- 2016: $25,353
P4 Hot Stamping Light Alloys ITTC ATLAS
Prof Bernard Rolfe, A/Prof Matthias Weiss, Prof Matthew Barnett, Dr Mark Easton, Mr Richard Taube, Richard Axe, Paul Sanders, Marion Merklein
RMIT Royal Melbourne Institute of Technology
- 2019: $3,000
- 2018: $3,000
- 2017: $3,000
P11 Multi Material Design Solutions ITTC ATLAS
Prof Bernard Rolfe, A/Prof Matthias Weiss, Dr Matthew Doolan, Nia Harrison, Mr Richard Taube
RMIT Royal Melbourne Institute of Technology
- 2019: $3,000
- 2018: $3,000
- 2017: $3,000
P7 Production of Longitudinal Components by Combining Flexible Roll Forming and Free Forming ITTC ATLAS
A/Prof Matthias Weiss, Prof Bernard Rolfe, Dr Matthew Doolan, Mr Richard Taube, Henry Wolfkamp, Albert Sedlmaier, Brian Oxley
RMIT Royal Melbourne Institute of Technology
- 2019: $3,000
- 2018: $3,000
- 2017: $3,000
High volume, scalable manufacturing cell for enhanced building products.
A/Prof Matthias Weiss, Prof Bernard Rolfe, Dr Mariana Paulino
Innovative Manfacturing CRC Limited
- 2022: $65,861
- 2021: $141,133
Supervisions
Jie Gong
Thesis entitled: Shape Optimisation of Flexible Roll Formed Complex Beams
Doctor of Philosophy (Engineering), School of Engineering
Amirhossein Asfia
Thesis entitled: Development of a 3D Printed Head and Neck Immobilisation Orthotic
Doctor of Philosophy (Engineering), School of Engineering
Mojtaba Izadi
Thesis entitled: Investigating and controlling microstructure and mechanical properties using powder fed-laser directed energy deposition additive manufacturing
Doctor of Philosophy (Engineering), School of Engineering
Salah Mahdi Khaleel Khaleel
Thesis entitled: Understanding the Environmental Effects on CFRP/Aluminium Joints for Automotive Applications
Doctor of Philosophy (Engineering), School of Engineering
Amir Abdollahpoor
Thesis entitled: Crashworthiness study on hot stamping components with tailored mechanical properties
Doctor of Philosophy (Engineering), School of Engineering
Hui Kong
Thesis entitled: Quenching and Partitioning of Tailor Welded Blanks during Hot Stamping
Master of Engineering, Institute for Frontier Materials
Jingsi Jiao
Thesis entitled: Developing a detailed understanding of web-warping in the flexible roll forming of UHSS
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Akbar Abvabi
Thesis entitled: Effect of Residual Stresses in Roll Forming Process of Metal Sheets
Doctor of Philosophy (Engineering), School of Engineering
Klaus Fiedler
Thesis entitled: An Integrated Approach to Shape and Topology Optimisation of Mechanical Structures
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Paul Okonkwo
Thesis entitled: Effects of Temperature and Speed on the Wear of Steel
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Michael Pereira
Thesis entitled: Tool Wear Analysis in Sheet Metal Stamping
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Reza Rafiee
Thesis entitled: Modelling of Tooling Wear in Trim Dies for AHSS
Master of Engineering, Institute for Frontier Materials
Timothy de Souza
Thesis entitled: Analysis of Springback Variation in Sheet Metal Forming
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Fabian D'Souza
Thesis entitled: Improving Stamping Truyout using Variational Analysis, FE Simulations and Robustness
Master of Engineering, Institute for Frontier Materials
Alison Warrior
Thesis entitled: Structured Methodology for Evaluating Stamping Feasibility of New Part Design
Master of Engineering, Institute for Frontier Materials
Vignesh Vishnudas Shanbhag
Thesis entitled: Understanding galling in sheet metal stamping using acoustic emissions.
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Achu Achuth Sreenivas
Thesis entitled: Understanding Local Deformation in Flexible Roll Forming and its Effect on Wrinkling
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Yun-Fei (Jack) Fu
Thesis entitled: Smooth Topological Design of Continuum Structures for Additive Manufacturing
Doctor of Philosophy (Engineering), School of Engineering
Mohammad Kamruzzaman Khan Prince
Thesis entitled: Design and Control of a Grid Connected Permanent Magnet Synchronous Generator-based Wind Energy Conversion System
Doctor of Philosophy (Engineering), School of Engineering
Lanka Hewage Dinushke Shaminda Weerasiri
Thesis entitled: Characterization of Hydrodynamics in Vacuum Fluidized Bed
Doctor of Philosophy (Engineering), School of Engineering
Rugang Chai
Thesis entitled: Ductile Fracture of Sheet Metal Considering Nonlinear Strain Paths
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Sadegh Ghanei
Thesis entitled: Wrinkling Study in Flexible Roll Forming of High Strength Components
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Peng Zhang
Thesis entitled: Micro-forming Thin Stainless-steel Sheet
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Adrien Pradeau
Thesis entitled: Anisotropic behaviour and fracture for sheet metals under associated and non-associated flow plasticity
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Ahmad Erfani Moghadam
Thesis entitled: Flexible Roll Forming of Variable Depth Profiles
Master of Engineering, Institute for Frontier Materials
Erwan Castanet
Thesis entitled: Manufacturing of Bio-composites for Automotive Applications
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Kongalage Nishchitha Indivarie Ubhayaratne
Thesis entitled: Audio-based signal extraction techniques for stamping tool condition monitoring
Doctor of Philosophy (Information Technology), School of Information Technology
Robert Earl Dick
Thesis entitled: Anisotropy and Failure Modeling for Nonlinear Strain Paths and Its Application to Rigid Packaging
Doctor of Philosophy (Engineering), School of Engineering
Paul Souza
Thesis entitled: Optimization of Hot Deformation Parameters of Ti6Al4V alloy
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Mariana Paulino Santos
Thesis entitled: Anisotropy for metals in Non-Associated Flow Plasticity
Doctor of Philosophy (Engineering), School of Engineering
Buddhika Nuwan Abeyrathna
Thesis entitled: In-line shape compensation for roll forming through process parameter monitoring
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Ossama Mamdouh Mohamed Badr
Thesis entitled: Forming Behaviour Analysis and Constitutive Modelling of Ti-6Al-4V at Room Temperature
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Ranjani Sudharsan
Thesis entitled: Development of Novel Crash Structures
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Stuart Hanafin
Thesis entitled: Growth and Replication: Exploring Facade Subdivision Based on Natural Processes
Master of Architecture, School of Architecture and Built Environment
Paul Collins
Thesis entitled: CAE Crash Analysis of Structures in Oblique Loading
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Seyed Asgari
Thesis entitled: Numerical Modelling of Advanced High Strength Steels
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Sugumar Dharmalingam
Thesis entitled: Design Fabrication and Evaluation of Novel Polymerase Chain Reaction Devices
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Matthias Weiss
Thesis entitled: An Investigation on the Forming Behaviour of Metal/Polymer Laminates
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Jonathan Mullins
Thesis entitled: Testing and Modelling to Obtain Material Behaviour for Crash Simulations
Doctor of Philosophy (Engineering), Institute for Frontier Materials