Dr David Morton

Scale resolving simulations of the effect of glottis motion and the laryngeal jet on flow dynamics during respiration

J Emmerling, S Vahaji, D Morton, D Fletcher, K Inthavong

(2024), Vol. 247, pp. 1-13, Computer Methods and Programs in Biomedicine, Amsterdam, The Netherlands, C1

Simulation study on the influence of particle properties on radial and axial segregation in a Freeman rheometer

S Shekhar, G Pereira, K Hapgood, D Morton, P Cleary

(2023), Vol. 265, Chemical Engineering Science, C1

3D printing of customised particles for powder rheology, mixing and segregation study

J Zhang, J Tuohey, N Amini, D Morton, K Hapgood

(2023), Vol. 425, Powder Technology, C1

Bulk Flow Optimisation of Amorphous Solid Dispersion Excipient Powders through Surface Modification

D Suhaidi, Y Dong, P Wynne, K Hapgood, D Morton

(2023), Vol. 15, Pharmaceutics, Switzerland, C1

The perfect storm: temporal analysis of air during the world's most deadly epidemic thunderstorm asthma (ETSA) event in Melbourne

D Price, K Hughes, D Dona, P Taylor, D Morton, S Stevanovic, F Thien, J Choi, P Torre, C Suphioglu

(2023), Vol. 17, pp. 1-22, Therapeutic advances in respiratory disease, London, Eng., C1

Improving the dynamic properties of silk particles by co-spray drying with L-leucine

R Remadevi, D AV Morton, K Hapgood, N Rashida, R Rajkhowa

(2022), Vol. 33, pp. 1-9, Advanced Powder Technology, Amsterdam, The Netherlands, C1

Photoelastic stress response of complex 3D-printed particle shapes

N Amini, J Tuohey, J Long, J Zhang, D Morton, K Daniels, F Fazelpour, K Hapgood

(2022), Vol. 409, Powder Technology, C1

Binder jetting of well-controlled powder agglomerates for breakage studies

J Zhang, N Amini, D Morton, K Hapgood

(2021), Vol. 32, pp. 19-29, Advanced Powder Technology, Amsterdam, The Netherlands, C1

Screening pharmaceutical excipient powders for use in commercial 3D binder jetting printers

A Antic, J Zhang, N Amini, D Morton, K Hapgood

(2021), Vol. 32, pp. 2469-2483, Advanced Powder Technology, C1

3D printing with particles as feedstock materials

J Zhang, N Amini, D Morton, K Hapgood

(2021), Vol. 32, pp. 3324-3345, Advanced Powder Technology, C1

Liquid imbibition into 3D printed porous substrates

J Zhang, J Tuohey, N Amini, D Morton, K Hapgood

(2021), Vol. 245, Chemical Engineering Science, C1

Highlighting DEM's Potential to Gauge Mechanistic Attributes of MUPS Tablet and Capsule Formulations

S Shekhar, N Amini, D Morton, K Hapgood, A Russell

(2021), Vol. 22, AAPS PharmSciTech, United States, C1

3D printing of tuneable agglomerates: Strain distribution and effect of internal flaws

J Zhang, N Amini, D Morton, K Hapgood

(2020), Vol. 31, pp. 2711-2722, Advanced Powder Technology, C1

Understanding the Impacts of Surface Compositions on the In-Vitro Dissolution and Aerosolization of Co-Spray-Dried Composite Powder Formulations for Inhalation

S Mangal, R Xu, H Park, D Zemlyanov, N Shetty, Y Lin, D Morton, H Chan, J Li, Q Zhou

(2019), Vol. 36, Pharmaceutical Research, United States, C1-1

To protect and to preserve: Novel preservation strategies for extracellular vesicles

G Kusuma, M Barabadi, J Tan, D Morton, J Frith, R Lim

(2018), Vol. 9, Frontiers in Pharmacology, Switzerland, C1

The effect of mechanical dry coating with magnesium stearate on flowability and compactibility of plastically deforming microcrystalline cellulose powders

J Koskela, D Morton, P Stewart, A Juppo, S Lakio

(2018), Vol. 537, pp. 64-72, International journal of pharmaceutics, Amsterdam, The Netherlands, C1-1

Single-step coprocessing of cohesive powder via mechanical dry coating for direct tablet compression

L Qu, P Stewart, K Hapgood, S Lakio, D Morton, Q Zhou

(2017), Vol. 106, pp. 159-167, Journal of pharmaceutical sciences, New York, N.Y., C1-1

A strategy to evaluate the surface energy of high packing efficiency fine powders via inverse gas chromatography

G Tan, L Qu, D Morton, I Larson

(2017), Vol. 320, pp. 470-473, Powder Technology, Amsterdam, The Netherlands, C1-1

Effect of the deformability of guest particles on the tensile strength of tablets from interactive mixtures

S Mangal, S Lakio, T Gengenbach, I Larson, D Morton

(2016), Vol. 514, pp. 341-352, International journal of pharmaceutics, Amsterdam, The Netherlands, C1-1

Applying surface energy derived cohesive-adhesive balance model in predicting the mixing, flow and compaction behaviour of interactive mixtures

S Mangal, F Meiser, G Tan, T Gengenbach, D Morton, I Larson

(2016), Vol. 104, pp. 110-116, European journal of pharmaceutics and biopharmaceutics, Amsterdam, The Netherlands, C1-1

Investigation of the Changes in Aerosolization Behavior between the Jet-Milled and Spray-Dried Colistin Powders Through Surface Energy Characterization

T Jong, J Li, D Morton, Q Zhou, I Larson

(2016), Vol. 105, pp. 1156-1163, Journal of Pharmaceutical Sciences, Amsterdam, The Netherlands, C1-1

Designing a multi-component spray-dried formulation platform for pulmonary delivery of biopharmaceuticals: the use of polyol, disaccharide, polysaccharide and synthetic polymer to modify solid-state properties for glassy stabilisation

T Sou, R Forbes, J Gray, R Prankerd, L Kaminskas, M McIntosh, D Morton

(2016), Vol. 287, pp. 248-255, Powder technology, Amsterdam, The Netherlands, C1-1

Relationship between the cohesion of guest particles on the flow behaviour of interactive mixtures

S Mangal, T Gengenbach, D Millington-Smith, B Armstrong, D Morton, I Larson

(2016), Vol. 102, pp. 168-177, European journal of pharmaceutics and biopharmaceutics, Amsterdam, The Netherlands, C1-1

Relationship between processing, surface energy and bulk properties of ultrafine silk particles

R Rajkhowa, A Kafi, Q Zhou, A Kondor, D Morton, X Wang

(2015), Vol. 270, pp. 112-120, Powder technology, Amsterdam, The Netherlands, C1

Influence of coating material on the flowability and dissolution of dry-coated fine ibuprofen powders

L Qu, Q Zhou, J Denman, P Stewart, K Hapgood, D Morton

(2015), Vol. 78, pp. 264-272, European journal of pharmaceutical sciences, Amsterdam, The Netherlands, C1-1

Investigation of the potential for direct compaction of a fine ibuprofen powder dry-coated with magnesium stearate

L Qu, Q Zhou, T Gengenbach, J Denman, P Stewart, K Hapgood, M Gamlen, D Morton

(2015), Vol. 41, pp. 825-837, Drug development and industrial pharmacy, Abingdon, Eng., C1-1

Pharmaceutical dry powder blending and scale-up: maintaining equivalent mixing conditions using a coloured tracer powder

D Barling, D Morton, K Hapgood

(2015), Vol. 270, pp. 461-469, Powder technology, Amsterdam, The Netherlands, C1-1

Spray-dried influenza antigen with trehalose and leucine produces an aerosolizable powder vaccine formulation that induces strong systemic and mucosal immunity after pulmonary administration

T Sou, D Morton, M Williamson, E Meeusen, L Kaminskas, M McIntosh

(2015), Vol. 28, pp. 361-371, Journal of aerosol medicine and pulmonary drug delivery, New Rochelle, N.Y., C1-1

Relationship between surface concentration of L-leucine and bulk powder properties in spray dried formulations

S Mangal, F Meiser, G Tan, T Gengenbach, J Denman, M Rowles, I Larson, D Morton

(2015), Vol. 94, pp. 160-169, European journal of pharmaceutics and biopharmaceutics, Amsterdam, The Netherlands, C1-1

Evaluation of a dry powder delivery system for laninamivir in a ferret model of influenza infection

J Panozzo, D Oh, K Margo, D Morton, D Piedrafita, J Mosse, A Hurt

(2015), Vol. 120, pp. 66-71, Antiviral Research, Amsterdam, The Netherlands, C1-1

Optimizing aerosolization of a high-dose L-arginine powder for pulmonary delivery

S Lakio, D Morton, A Ralph, P Lambert

(2015), Vol. 10, pp. 528-540, Asian journal of pharmaceutical sciences, Amsterdam, The Netherlands, C1-1

On the methods to measure powder flow

G Tan, D Morton, I Larson

(2015), Vol. 21, pp. 5751-5765, Current Pharmaceutical Design, Schiphol, The Netherlands, C1-1

Particle engineering Via mechanical dry coating in the design of pharmaceutical solid dosage forms

L Qu, D Morton, Q Zhou

(2015), Vol. 21, pp. 5802-5814, Current Pharmaceutical Design, Schiphol, The Netherlands, C1-1

Particle engineering of excipients for direct compression: Understanding the role of material properties

S Mangal, F Meiser, D Morton, I Larson

(2015), Vol. 21, pp. 5877-5889, Current Pharmaceutical Design, Schiphol, The Netherlands, C1-1

The kinetics of de-agglomeration of magnesium stearate dry-coated salbutamol sulphate powders

J Shi, S Das, D Morton, P Stewart

(2015), pp. 131-142, KONA powder and particle journal, Osaka, Japan, C1-1

The role of physico-chemical and bulk characteristics of co-spray dried l-leucine and polyvinylpyrrolidone on glidant and binder properties in interactive mixtures

S Mangal, F Meiser, S Lakio, D Morton, I Larson

(2015), Vol. 479, pp. 338-348, International journal of pharmaceutics, Amsterdam, The Netherlands, C1-1

An insight into powder entrainment and drug delivery mechanisms from a modified Rotahaler®

S Sim, K Margo, J Parks, R Howell, G Hebbink, L Orlando, I Larson, P Leslie, L Ho, D Morton

(2014), Vol. 477, pp. 351-360, International journal of pharmaceutics, Amsterdam, The Netherlands, C1-1

Application of the unified compaction curve to link wet granulation and tablet compaction behaviour

T Nguyen, D Morton, K Hapgood

(2013), Vol. 240, pp. 103-115, Powder technology, Amsterdam, The Netherlands, C1-1

Designing a Multicomponent Spray-Dried Formulation Platform for Pulmonary Delivery of Biomacromolecules: The Effect of Polymers on the Formation of an Amorphous Matrix for Glassy State Stabilization of Biomacromolecules

T Sou, M McIntosh, L Kaminskas, R Prankerd, D Morton

(2013), Vol. 31, pp. 1451-1458, Drying Technology, London, Eng., C1-1

Importance of particle size and shape on the tensile strength distribution and de-agglomeration of cohesive powders

S Das, S Behara, D Morton, I Larson, P Stewart

(2013), Vol. 249, pp. 297-303, Powder Technology, Amsterdam, The Netherlands, C1-1

Colistin powders with high aerosolisation efficiency for respiratory infection: Preparation and in vitro evaluation

Q Zhou, D Morton, H Yu, J Jacob, J Wang, J Li, H Chan

(2013), Vol. 102, pp. 3736-3747, Journal of Pharmaceutical Sciences, Amsterdam, The Netherlands, C1-1

Pulmonary delivery of an ultra-fine oxytocin dry powder formulation: potential for treatment of postpartum haemorrhage in developing countries

R Prankerd, T Nguyen, J Ibrahim, R Bischof, G Nassta, L Olerile, A Russell, F Meiser, H Parkington, H Coleman, D Morton, M McIntosh

(2013), Vol. 8, pp. 1-9, PloS One, e82965, C1-1

Effect of surface coating with magnesium stearate via mechanical dry powder coating approach on the aerosol performance of micronized drug powders from dry powder inhalers

Q Zhou, L Qu, T Gengenbach, I Larson, P Stewart, D Morton

(2013), Vol. 14, pp. 38-44, AAPS PharmSciTech, Berlin, Germany, C1-1

The effect of amino acid excipients on morphology and solid-state properties of multi-component spray-dried formulations for pulmonary delivery of biomacromolecules

T Sou, L Kaminskas, T Nguyen, R Carlberg, M McIntosh, D Morton

(2013), Vol. 83, pp. 234-243, European Journal of Pharmaceutics and Biopharmaceutics, Amsterdam, The Netherlands, C1-1

Ultrafine wool powders and their bulk properties

R Rajkhowa, Q Zhou, T Tsuzuki, D Morton, X Wang

(2012), Vol. 224, pp. 183-188, Powder technology, Lausanne, Switzerland, C1

Powder strength distributions for understanding de-Agglomeration of lactose powders

S Das, S Behara, J Bulitta, D Morton, I Larson, P Stewart

(2012), Vol. 29, pp. 2926-2935, Pharmaceutical Research, United States, C1-1

Insight into pressure drop dependent efficiencies of dry powder inhalers

S Behara, I Larson, P Kippax, P Stewart, D Morton

(2012), Vol. 46, pp. 142-148, European Journal of Pharmaceutical Sciences, Netherlands, C1-1

Drug-lactose binding aspects in adhesive mixtures: Controlling performance in dry powder inhaler formulations by altering lactose carrier surfaces

Q Zhou, D Morton

(2012), Vol. 64, pp. 275-284, Advanced Drug Delivery Reviews, Netherlands, C1-1

Dissolution of a poorly water-soluble drug dry coated with magnesium and sodium stearate

T Tay, D Morton, T Gengenbach, P Stewart

(2012), Vol. 80, pp. 443-452, European Journal of Pharmaceutics and Biopharmaceutics, Netherlands, C1

Investigation of the extent of surface coating via mechanofusion with varying additive levels and the influences on bulk powder flow properties

Q Zhou, L Qu, T Gengenbach, J Denman, I Larson, P Stewart, D Morton

(2011), Vol. 413, pp. 36-43, International Journal of Pharmaceutics, Amsterdam, The Netherlands, C1

Use of surface energy distributions by inverse gas chromatography to understand mechanofusion processing and functionality of lactose coated with magnesium stearate

S Das, Q Zhou, D Morton, I Larson, P Stewart

(2011), Vol. 43, pp. 325-333, European Journal of Pharmaceutical Sciences, Amsterdam, The Netherlands, C1

Investigating the interactions of amino acid components on a mannitol-based spray-dried powder formulation for pulmonary delivery: A design of experiment approach

T Sou, L Orlando, M McIntosh, L Kaminskas, D Morton

(2011), Vol. 421, pp. 220-229, International Journal of Pharmaceutics, Amsterdam, The Netherlands, C1

The kinetics of cohesive powder de-agglomeration from three inhaler devices

S Behara, I Larson, P Kippax, D Morton, P Stewart

(2011), Vol. 421, pp. 72-81, International Journal of Pharmaceutics, Amsterdam, The Netherlands, C1

Counter-intuitive enhancement in the dissolution of indomethacin with the incorporation of cohesive poorly water-soluble inorganic salt additives

T Tay, A Allahham, D Morton, P Stewart

(2011), Vol. 79, pp. 674-682, European Journal of Pharmaceutics and Biopharmaceutics, Amsterdam, The Netherlands, C1

Characterization of the surface properties of a model pharmaceutical fine powder modified with a pharmaceutical lubricant to improve flow via a mechanical dry coating approach

Q Zhou, J Denman, T Gengenbach, S Das, L Qu, H Zhang, I Larson, P Stewart, D Morton

(2011), Vol. 100, pp. 3421-3430, Journal of Pharmaceutical Sciences, New York, N.Y., C1

Structural influence of cohesive mixtures of salbutamol sulphate and lactose on aerosolisation and de-agglomeration behaviour under dynamic conditions

S Behara, P Kippax, M McIntosh, D Morton, I Larson, P Stewart

(2011), Vol. 42, pp. 210-219, European Journal of Pharmaceutical Sciences, Amsterdam, The Netherlands, C1

Effect of mechanical dry particle coating on the improvement of powder flowability for lactose monohydrate: A model cohesive pharmaceutical powder

Q Zhou, L Qu, I Larson, P Stewart, D Morton

(2011), Vol. 207, pp. 414-421, Powder Technology, Amsterdam, The Netherlands, C1

Kinetics of emitted mass-A study with three dry powder inhaler devices

S Behara, P Kippax, I Larson, D Morton, P Stewart

(2011), Vol. 66, pp. 5284-5292, Chemical Engineering Science, Oxford, Eng., C1

Determination of the polar and total surface energy distributions of particulates by inverse gas chromatography

S Das, I Larson, D Morton, P Stewart

(2011), Vol. 27, pp. 521-523, Langmuir, Washington, D.C., C1

Understanding improved dissolution of indomethacin through the use of cohesive poorly water-soluble aluminium hydroxide: Effects of concentration and particle size distribution

T Tay, A Allahham, D Morton, P Stewart

(2011), Vol. 100, pp. 4269-4280, Journal of Pharmaceutical Sciences, New York, N.Y., C1

An approach to characterising the cohesive behaviour of powders using a flow titration aerosolisation based methodology

S Behara, I Larson, P Kippax, D Morton, P Stewart

(2011), Vol. 66, pp. 1640-1648, Chemical Engineering Science, Oxford, Eng., C1

New developments in dry powder pulmonary vaccine delivery

T Sou, E Meeusen, M de Veer, D Morton, L Kaminskas, M McIntosh

(2011), Vol. 29, pp. 191-198, Trends in Biotechnology, England, C1-1

Improving powder flow properties of a cohesive lactose monohydrate powder by intensive mechanical dry coating

Q Zhou, B Armstrong, I Larson, P Stewart, D Morton

(2010), Vol. 99, pp. 969-981, Journal of Pharmaceutical Sciences, New York, N.Y., C1

Understanding the influence of powder flowability, fluidization and de-agglomeration characteristics on the aerosolization of pharmaceutical model powders

Q Zhou, B Armstrong, I Larson, P Stewart, D Morton

(2010), Vol. 40, pp. 412-421, European Journal of Pharmaceutical Sciences, Netherlands, C1

Ultrasonic nebulization platforms for pulmonary drug delivery

L Yeo, J Friend, M McIntosh, E Meeusen, D Morton

(2010), Vol. 7, pp. 663-679, Expert Opinion on Drug Delivery, England, C1-1

Improving aerosolization of drug powders by reducing powder intrinsic cohesion via a mechanical dry coating approach

Q Zhou, L Qu, I Larson, P Stewart, D Morton

(2010), Vol. 394, pp. 50-59, International Journal of Pharmaceutics, Amsterdam, The Netherlands, C1

Short-term changes in drug agglomeration within interactive mixtures following blending

J Andreou, P Stewart, D Morton

(2009), Vol. 372, pp. 1-11, International Journal of Pharmaceutics, Netherlands, C1

Liquid crystalline coated drug particles as a potential route to long acting intravitreal steroids

A Tilley, D Morton, T Hanley, B Boyd

(2009), Vol. 6, pp. 322-331, Current Drug Delivery, United Arab Emirates, C1

The role of force control agents in high-dose dry powder inhaler formulations

P Begat, D Morton, J Shur, P Kippax, J Staniforth, R Price

(2009), Vol. 98, pp. 2770-2783, Journal of Pharmaceutical Sciences, New York, N.Y,, C1

Miniature inhalation therapy platform using surface acoustic wave microfluidic atomization

A Qi, J Friend, L Yeo, D Morton, M McIntosh, L Spiccia

(2009), Vol. 9, pp. 2184-2193, Lab on a Chip, Cambridge, Eng., C1

The influence of force control agents on the cohesive-adhesive balance in dry powder inhaler formulations

P Begat, R Price, H Harris, D Morton, J Staniforth

(2005), Vol. 23, pp. 109-121, KONA Powder and Particle Journal, C1

The cohesive-adhesive balances in dry powder inhaler formulations II: Influence on fine particle delivery characteristics

P Begat, D Morton, J Staniforth, R Price

(2004), Vol. 21, pp. 1826-1833, Pharmaceutical Research, United States, C1

The cohesive-adhesive balances in dry powder inhaler formulations I: Direct quantification by atomic force microscopy

P Begat, D Morton, J Staniforth, R Price

(2004), Vol. 21, pp. 1591-1597, Pharmaceutical Research, United States, C1

Reactivity of bis(diphenylphosphino)methane at a di-iron centre: Thermally induced rearrangements of dimetallacyclopentenone complexes [Fe2(CO)5{μ-σ:η³-C(O)CRCR} (μ-dppm)]

G Hogarth, S Knox, B Lloyd, K Macpherson, D Morton, A Orpen

(1996), Vol. 251, pp. 167-176, Inorganica Chimica Acta, C1

Aerosol penetration through capillaries and leaks: Experimental studies on the influence of pressure

D Morton, J Mitchell

(1995), Vol. 26, pp. 353-367, Journal of Aerosol Science, C1

Reactions of [Fe2(CO)6(μ-CO)(μ-dppm)] with alkynes: Stepwise synthesis of tropone at a dinuclear metal centre

S Knox, B Lloyd, D Morton, A Orpen, M Turner, G Hogarth

(1995), Vol. 14, pp. 2723-2743, Polyhedron, C1

Reactivity of allene at phosphine-bridged di-iron centres: X-ray crystal structures of [Fe2(CO)5{μ-σ,η³-C(O)C(CH2)2}(μ-dppm)] and [Fe2(CO)4{μ,η³,η³′-(CH2)2C2(CH2)2}(μ-dppm)]·Et2O

S Knox, D Morton, A Guy Orpen, M Turner

(1994), Vol. 220, pp. 201-214, Inorganica Chimica Acta, C1

The synthesis of advanced ceramics in bulk quantities using aerosol routes

D Booker, B Bowsher, D Morton

(1992), Vol. 23, pp. 819-822, Journal of Aerosol Science, C1

Phosphorus-carbon bond cleavage at a di-iron centre: synthesis of μ-phosphidomethyl complexes [Fe2(CO)6(μ-CH2PR2)(μ-PR2)] from [Fe2(CO)6(μ-R2PCH2PR2)]

N Doherty, G Hogarth, S Knox, K Macpherson, F Melchior, D Morton, A Orpen

(1992), Vol. 198-200, pp. 257-270, Inorganica Chimica Acta, C1

Aerosol leakage through short capillaries

D Morton, B North, J Mitchell

(1992), Vol. 23, pp. 27-30, Journal of Aerosol Science, C1

Benzyne complexes of ruthenium: Models for dissociative chemisorption of benzene on a metal surface. Crystal structures of...

S Knox, B Lloyd, D Morton, S Nicholls, A Orpen, J Viñas, M Weber, G Williams

(1990), Vol. 394, pp. 385-415, Journal of Organometallic Chemistry, C1