Dr Filip Stojcevski

STAFF PROFILE

Position

Research Fellow

Faculty

Instit for Frontier Materials

Department

Instit for Frontier Materials

Campus

Geelong Waurn Ponds Campus

Publications

Filter by

2022

Surface modification of carbon fiber as a protective strategy against thermal degradation

Y Athulya Wickramasingha, B Dharmasiri, J Randall, Y Yin, G Andersson, D Nepal, B Newman, F Stojcevski, D Eyckens, L Henderson

(2022), Vol. 153, pp. 1-11, Composites Part A: Applied Science and Manufacturing, Amsterdam, The Netherlands, C1

journal article

Carbon Fiber Surface Functional Landscapes: Nanoscale Topography and Property Distribution

K Adstedt, F Stojcevski, B Newman, D Hayne, L Henderson, D Mollenhauer, D Nepal, V Tsukruk

(2022), Vol. 14, pp. 4699-4713, ACS Applied Materials and Interfaces, Washington, D.C., C1

journal article

Mixed Surface Chemistry on Carbon Fibers to Promote Adhesion in Epoxy and PMMA Polymers

J Randall, D Eyckens, E Sarlin, S Palola, G Andersson, Y Yin, F Stojcevski, L Henderson

(2022), Vol. 61, pp. 1615-1623, Industrial and Engineering Chemistry Research, Washington, D.C., C1

journal article

Carbon fiber sizing agents based on renewable terpenes

S Pawar, S Hutchinson, D Eyckens, F Stojcevski, D Hayne, T Gengenbach, J Razal, L Henderson

(2022), Vol. 220, pp. 1-8, Composites Science and Technology, Amsterdam, The Netherlands, C1

journal article

Assessing the properties of Poly(dicyclopentadiene) reinforced with discontinuous carbon fibers

D Hayne, M Singleton, B Patterson, Y Athulya Wickramasingha, J Sietins, D Knorr, F Stojcevski, L Henderson

(2022), Vol. 155, pp. 1-10, Composites Part A: Applied Science and Manufacturing, Amsterdam, The Netherlands, C1

journal article

Inverse Vulcanisation of canola oil as a route to recyclable chopped carbon fibre composites

F Stojcevski, M Stanfield, D Hayne, M Mann, N Lundquist, J Chalker, L Henderson

(2022), Vol. 32, pp. 1-9, Sustainable Materials and Technologies, Amsterdam, The Netherlands, C1

journal article

A comparison of mechanical properties of recycled high-density polyethylene/waste carbon fiber via injection molding and 3D printing

A Borkar, A Hendlmeier, Zan Simon, J Randall, F Stojcevski, L Henderson

(2022), Vol. 43, pp. 2408-2418, Polymer Composites, London, Eng., C1

journal article

Carbon fiber polypropylene interphase modification as a route to improved toughness

J Randall, F Stojcevski, N Djordjevic, A Hendlmeier, B Dharmasiri, M Stanfield, D Knorr, N Tran, R Varley, L Henderson

(2022), Vol. 159, pp. 1-11, Composites Part A: Applied Science and Manufacturing, Amsterdam, The Netherlands, C1

journal article
2021

Using in situ polymerisation to enhance adhesion of dissimilar materials

F Stojcevski, O Siddique, G Meric, J Randall, N Emonson, L Henderson

(2021), Vol. 104, International Journal of Adhesion and Adhesives, C1

journal article

Insulating Composites Made from Sulfur, Canola Oil, and Wool**

I Bu Najmah, N Lundquist, M Stanfield, F Stojcevski, J Campbell, L Esdaile, C Gibson, D Lewis, L Henderson, T Hasell, J Chalker

(2021), Vol. 14, pp. 2352-2359, ChemSusChem, Weinheim, Germany, C1

journal article

Improving the effects of plasma polymerization on carbon fiber using a surface modification pretreatment

D Eyckens, K Jarvis, A Barlow, Y Yin, L Soulsby, Y Athulya Wickramasingha, F Stojcevski, G Andersson, P Francis, L Henderson

(2021), Vol. 143, Composites Part A: Applied Science and Manufacturing, C1

journal article

Surface modification of carbon fibres using ring-opening metathesis polymerization

D Hayne, F Stojcevski, D Knorr, N Tran, L Henderson

(2021), Vol. 145, Composites Part A: Applied Science and Manufacturing, C1

journal article

Investigating interfacial adhesion and open-hole compressive (OHC) strength correlations for CFRPs via variations in sizing and oxidative surface treatment

F Stojcevski, D Hayne, T Hilditch, L Henderson

(2021), Vol. 150, Composites Part A: Applied Science and Manufacturing, C1

journal article

Carbon fibre surface chemistry and its role in fibre-to-matrix adhesion

D Eyckens, F Stojcevski, A Hendlmeier, J Randall, D Hayne, M Stanfield, B Newman, F Vukovic, T Walsh, L Henderson

(2021), Vol. 9, pp. 26528-26572, Journal of Materials Chemistry A, Cambridge, Eng., C1

journal article

Synergistic effects of plasma polymerization and covalent surface modification of carbon fibers

D Eyckens, L Soulsby, F Stojcevski, A Wickramasingha, L Henderson

(2021), Vol. 3, pp. 1711-1718, ASC 2021: Proceedings of the 36th Technical Conference of the American Society for Composites. Composites Ingenuity Taking on Challenges in Environment-Energy-Economy, Texas, USA, E1

conference
2020

Using in situ polymerization to increase puncture resistance and induce reversible formability in silk membranes

N Emonson, D Eyckens, B Allardyce, A Hendlmeier, M Stanfield, L Soulsby, F Stojcevski, L Henderson

(2020), Vol. 13, Materials, Switzerland, C1

journal article

Reactive compression molding post-inverse vulcanization: a method to assemble, recycle, and repurpose sulfur polymers and composites

N Lundquist, A Tikoalu, M Worthington, R Shapter, S Tonkin, F Stojcevski, M Mann, C Gibson, J Gascooke, A Karton, L Henderson, L Esdaile, J Chalker

(2020), Vol. 26, pp. 10035-10044, Chemistry - A European Journal, Chichester, Eng, C1

journal article

Examining interfacial interactions in a range of polymers using poly(ethylene oxide) functionalized carbon fibers

D Eyckens, J Randall, F Stojcevski, E Sarlin, S Palola, M Kakkonen, C Scheffler, L Henderson

(2020), Vol. 138, Composites Part A: Applied Science and Manufacturing, C1

journal article

The effect of sizing and surface oxidation on the surface properties and tensile behaviour of recycled carbon fibre: An end-of-life perspective

D He, V Soo, F Stojcevski, W Lipiński, L Henderson, P Compston, M Doolan

(2020), Vol. 138, pp. 1-10, Composites Part A: Applied Science and Manufacturing, Amsterdam, The Netherlands, C1

journal article
2019

Phosphorus-based α-amino acid mimetic for enhanced flame-retardant properties in an epoxy resin

M Stanfield, F Stojcevski, A Hendlmeier, R Varley, J Carrascal, A Osorio, D Eyckens, L Henderson

(2019), Vol. 72, pp. 226-232, Australian Journal of Chemistry, C1

journal article

A comparison of interfacial testing methods and sensitivities to carbon fiber surface treatment conditions

F Stojcevski, T Hilditch, L Henderson

(2019), Vol. 118, pp. 293-301, Composites Part A: Applied Science and Manufacturing, Amsterdam, The Netherlands, C1

journal article

Designing carbon fiber composite interfaces using a 'graft-to' approach: Surface grafting density versus interphase penetration

J Randall, D Eyckens, L Servinis, F Stojcevski, L O'Dell, T Gengenbach, B Demir, T Walsh, L Henderson

(2019), Vol. 146, pp. 88-96, Carbon, Amsterdam, The Netherlands, C1

journal article

Improved out-of-plane strength and weight reduction using hybrid interface composites

F Stojcevski, D Eyckens, J Randall, L Marinovic, G Méric, L Henderson

(2019), Vol. 182, Composites Science and Technology, C1

journal article

Sizing effects on the interfacial shear strength of a carbon fibre reinforced two-component thermoplastic polymer

A Hendlmeier, L Marinovic, S Al-Assafi, F Stojcevski, L Henderson

(2019), Vol. 127, Composites Part A: Applied Science and Manufacturing, C1

journal article

Examining conductivity, current density, and sizings applied to carbon fibers during manufacture and their effect on fiber-to-matrix adhesion in epoxy polymers

A Hendlmeier, F Stojcevski, R Alexander, S Gupta, L Henderson

(2019), Vol. 179, Composites Part B: Engineering, C1

journal article

Fiber with Butterfly Wings: Creating Colored Carbon Fibers with Increased Strength, Adhesion, and Reversible Malleability

D Eyckens, C Arnold, J Randall, F Stojcevski, A Hendlmeier, M Stanfield, J Pinson, T Gengenbach, R Alexander, L Soulsby, P Francis, L Henderson

(2019), Vol. 11, pp. 41617-41625, ACS Applied Materials and Interfaces, Washington, D.C., C1

journal article
2018

A modern account of Iosipescu testing

F Stojcevski, T Hilditch, L Henderson

(2018), Vol. 107, pp. 545-554, Composites part A: applied science and manufacturing, Amsterdam, The Netherlands, C1

journal article

Enhancing interfacial shear strength via surface grafting of carbon fibers using the Kolbe decarboxylation reaction

C Arnold, K Beggs, D Eyckens, F Stojcevski, L Servinis, L Henderson

(2018), Vol. 159, pp. 135-141, Composites science and technology, Amsterdam, The Netherlands, C1

journal article

An efficient high-throughput grafting procedure for enhancing carbon fiber-to-matrix interactions in composites

D Eyckens, F Stojcevski, A Hendlmeier, C Arnold, J Randall, M Perus, L Servinis, T Gengenbach, B Demir, T Walsh, L Henderson

(2018), Vol. 353, pp. 373-380, Chemical engineering journal, Amsterdam, The Netherlands, C1

journal article

Using variable interfacial adhesion characteristics within a composite to improve flexural strength and decrease fiber volume

F Stojcevski, J Randall, L Henderson

(2018), Vol. 165, pp. 250-258, Composites science and technology, Amsterdam, The Netherlands, C1

journal article

Effect of carbon fiber oxidization parameters and sizing deposition levels on the fiber-matrix interfacial shear strength

F Stojcevski, T Hilditch, T Gengenbach, L Henderson

(2018), Vol. 114, pp. 212-224, Composites part A: applied science and manufacturing, Amsterdam, The Netherlands, C1

journal article

Effect of tow size and interface interaction on interfacial shear strength determined by Iosipescu (V-notch) testing in epoxy resin

F Stojceveski, A Hendlmeier, J Randall, C Arnold, M Stanfield, D Eyckens, R Alexander, L Henderson

(2018), Vol. 11, Materials, Switzerland, C1

journal article

Optimization of carbon fiber surfaces for reinforcement in advanced polymer composites

L Henderson, R Varley, F Stojcevski, J Randall, D Eyckens, B Demir, T Walsh

(2018), Vol. 4, pp. 2492-2498, ASC 2018 : Proceedings of the 33rd Technical Conference of the American Society for Composites, Seattle, Washington, E1

conference

Funded Projects at Deakin

Industry and Other Funding

'Green Steel' electrode development.

Prof Luke Henderson, Dr David Hayne, Dr Filip Stojcevski

MIH2 Pty Ltd

  • 2022: $57,692

Supervisions

No completed student supervisions to report