Dr Ilana Timokhina

STAFF PROFILE

Position

Senior Research Fellow

Faculty

Instit for Frontier Materials

Department

Instit for Frontier Materials

Campus

Geelong Waurn Ponds Campus

Contact

Publications

Filter by

2019

Transformation from cluster to nano-precipitate in microalloyed ferritic steel

J Wang, M Weyland, I Bikmukhametov, M Miller, P Hodgson, I Timokhina

(2019), Vol. 160, pp. 53-57, Scripta materialia, Amsterdam, The Netherlands, C1

journal

The effect of strain on interphase precipitation characteristics in a Ti-Mo steel

I Bikmukhametov, H Beladi, J Wang, P Hodgson, I Timokhina

(2019), Vol. 170, pp. 75-86, Acta materialia, Amsterdam, The Netherlands, C1

journal

Mechanical twinning and texture evolution during asymmetric warm rolling of a high manganese steel

F Brasche, J Wang, I Timokhina, C Haase, R Lapovok, D Molodov

(2019), Vol. 764, pp. 1-8, Materials Science and Engineering A, Amsterdam, The Netherlands, C1

journal
2018

Influence of rolling asymmetry on the microstructure, texture and mechanical behavior of high-manganese twinning-induced plasticity steel

F Berrenberg, J Wang, I Timokhina, C Haase, R Lapovok, D Molodov

(2018), Vol. 709, pp. 172-180, Materials science and engineering a, Amsterdam, The Netherlands, C1

journal

Effects of hot-deformation on grain boundary precipitation and segregation in Ti-Mo microalloyed steels

J Wang, P Hodgson, I Bikmukhametov, M Miller, I Timokhina

(2018), Vol. 141, pp. 48-56, Materials and design, Amsterdam, The Netherlands, C1

journal

Optimization of upcycling of Ti-6Al-4V swarf

Y Qi, I Timokhina, A Shekhter, K Sharp, R Lapovok

(2018), Vol. 255, pp. 853-864, Journal of materials processing technology, Amsterdam, The Netherlands, C1

journal

Precipitation and clustering in a Ti-Mo steel investigated using atom probe tomography and small-angle neutron scattering

S Dhara, R Marceau, K Wood, T Dorin, I Timokhina, P Hodgson

(2018), Vol. 718, pp. 74-86, Materials Science and Engineering: A, Amsterdam, The Netherlands, C1

journal

Influence of the strain history on TWIP steel deformation mechanisms in the deep-drawing process

R Lapovok, I Timokhina, A Mester, M Weiss, A Shekhter

(2018), Vol. 49, pp. 2069-2083, Metallurgical and materials transactions A, New York, N.Y., C1

journal

Atom probe tomography data analysis procedure for precipitate and cluster identification in a Ti-Mo steel

S Dhara, R Marceau, K Wood, T Dorin, I Timokhina, P Hodgson

(2018), Vol. 18, pp. 968-982, Data brief, Amsterdam, The Netherlands, C1

journal

The role of grain orientation and grain boundary characteristics in the mechanical twinning formation in a high manganese twinning-induced plasticity steel

V Shterner, I Timokhina, A Rollett, H Beladi

(2018), Vol. 49, pp. 2597-2611, Metallurgical and materials transactions A: physical metallurgy and materials Science, New York, N.Y., C1

journal

Correction to: influence of the strain history on TWIP steel deformation mechanisms in the deep-drawing process

R Lapovok, I Timokhina, K Mester, M Weiss, A Shekhter

(2018), Vol. 49, pp. 5911-5911, Metallurgical and materials transactions A, Cham, Switzerland, C1

journal

Characterization of Nb interface segregation during welding thermal cycle in microalloyed steel by atom probe tomography

H Wang, J Wang, Z Tong, P Hodgson, X Wan, K Wu, R Wei, I Timokhina

(2018), Vol. 49, pp. 6224-6230, Metallurgical and materials transactions A, Cham, Switzerland, C1

journal

Deformation-induced phase transformations

E Pereloma, I Timokhina

(2018), Vol. 8, pp. 1-2, Metals, Basel, Switzerland, C1

journal
2017

Clustering and precipitation processes in a ferritic titanium-molybdenum microalloyed steel

S Mukherjee, I Timokhina, C Zhu, S Ringer, P Hodgson

(2017), Vol. 690, pp. 621-632, Journal of Alloys and Compounds, C1

journal

On the crystallographic characteristics of nanobainitic steel

H Beladi, V Tari, I Timokhina, P Cizek, G Rohrer, A Rollett, P Hodgson

(2017), Vol. 127, pp. 426-437, Acta materialia, Amsterdam, The Netherlands, C1

journal

Constitutive relations analyses of plastic flow in dual-phase steels to elucidate structure-strength-ductility correlations

S Saimoto, I Timokhina, E Pereloma

(2017), Vol. 69, pp. 1228-1235, JOM : journal of the minerals, metals and materials society, Berlin, Germany, C1

journal

The nitrocarburising response of low temperature bainite steel

D Fabijanic, I Timokhina, H Beladi, P Hodgson

(2017), Vol. 7, pp. 1-8, Metals, Basel, Switzerland, C1

journal

Role of shear in interface formation of aluminium-steel multilayered composite sheets

A Mendes, I Timokhina, A Molotnikov, P Hodgson, R Lapovok

(2017), Vol. 705, pp. 142-152, Materials science and engineering: A, Amsterdam, The Netherlands, C1

journal
2016

The influence of fine ferrite formation on the ?/? interface, fine bainite and retained austenite in a thermomechanically-processed transformation induced plasticity steel

I Timokhina, M Miller, H Beladi, P Hodgson

(2016), Vol. 31, pp. 806-818, Journal of materials research, Cambridge, Eng., C1

journal

Growth of bainitic ferrite and carbon partitioning during the early stages of bainite transformation in a 2 mass% silicon steel studied by in situ neutron diffraction, TEM and APT

I Timokhina, K Liss, D Raabe, K Rakha, H Beladi, X Xiong, P Hodgson

(2016), Vol. 49, pp. 399-414, Journal of applied crystallography, Paris, France, C1

journal

In situ synchrotron X-ray diffraction studies of the effect of microstructure on tensile behavior and retained austenite stability of thermo-mechanically processed transformation induced plasticity steel

K Yan, K Liss, I Timokhina, E Pereloma

(2016), Vol. 662, pp. 185-197, Materials science and engineering A, Amsterdam, The Netherlands, C1

journal

On the work-hardening behaviour of a high manganese TWIP steel at different deformation temperatures

V Shterner, I Timokhina, H Beladi

(2016), Vol. 669, pp. 437-446, Materials science & engineering A, Amsterdam, The Netherlands, C1

journal

The impact of retained austenite characteristics on the two-body abrasive wear behavior of ultrahigh strength bainitic steels

B Narayanaswamy, P Hodgson, I Timokhina, H Beladi

(2016), Vol. 47, pp. 4883-4895, Metallurgical and materials transactions A: physical metallurgy and materials science, Berlin, Germany, C1

journal

Hydrogen permeation in nanostructured bainitic steel

O Kazum, H Beladi, I Timokhina, Y He, M Bobby Kannan

(2016), Vol. 47A, pp. 4896-4903, Metallurgical and materials transactions A, Berlin, Germany, C1

journal

On the Ti-Mo-Fe-C atomic clustering during interphase precipitation in the Ti-Mo steel studied by advanced microscopic techniques

I Timokhina, M Miller, J Wang, H Beladi, P Cizek, P Hodgson

(2016), Vol. 111, pp. 222-229, Materials and design, Amsterdam, The Netherlands, C1

journal

Bake hardening of automotive steels

E Pereloma, I Timokhina

(2016), pp. 259-288, Automotive steels: design, metallurgy, processing and applications, Amsterdam, The Netherlands, B1

chapter

Retained austenite: transformation-induced plasticity

E Pereloma, A Gazder, I Timokhina

(2016), pp. 3088-3103, Encyclopedia of iron, steel, and their alloys, New York. N.Y., B1

chapter
2015

Nanocrystalline Ti Produced by Cryomilling and Consolidation by Severe Plastic Deformation

I Semenova, I Timokhina, R Islamgaliev, E Lavernia, R Valiev

(2015), Vol. 5, pp. 206-215, Metals, C1

journal
2014

Aqueous corrosion performance of nanostructured bainitic steel

O Kazum, K Bobby, H Beladi, I Timokhina, P Hodgson, S Khoddam

(2014), Vol. 54, pp. 67-71, Materials and design, Amsterdam, The Netherlands, C1

journal

Asymmetric rolling of interstitial-free steel using differential roll diameters. Part II: Microstructure and annealing effects

D Orlov, R Lapovok, L Toth, I Timokhina, P Hodgson, A Haldar, D Bhattacharjee

(2014), Vol. 45, pp. 447-454, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

journal

On low temperature bainite transformation characteristics using in-situ neutron diffraction and atom probe tomography

K Rakha, H Beladi, I Timokhina, X Xiong, S Kabra, K Liss, P Hodgson

(2014), Vol. 589, pp. 303-309, Materials science & engineering A, Amsterdam, The Netherlands, C1

journal

The formation of complex microstructures after different deformation modes in advanced high-strength steels

I Timokhina, E Pereloma, P Hodgson

(2014), Vol. 45, pp. 4247-4256, Metallurgical and materials transactions A, Berlin, Germany, C1

journal

Effect of temperature on mechanical behaviour of high manganese TWIP steel

V Shterner, I Timokhina, H Beladi, P Hodgson

(2014), Vol. 773-774, pp. 257-262, Materials science forum, Zurich, Switzerland, C1

journal

A constitutive model of the deformation behaviour of twinning induced plasticity (TWIP) steel at different temperatures

V Shterner, A Molotnikov, I Timokhina, Y Estrin, H Beladi

(2014), Vol. 613, pp. 224-231, Materials Science and Engineering A, Amsterdam , Netherlands, C1

journal

Severe plastic deformation of TWIP steel

I Timokhina, A Medvedev, R Lapovok

(2014), Vol. 593, pp. 163-169, Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, Amsterdam, The Netherlands, C1

journal

The correlation between stacking fault energy and the work hardening behaviour of high-mn twinning induced plasticity steel tested at various temperatures

V Shterner, I Timokhina, H Beladi

(2014), Vol. 922, pp. 676-681, Advanced Materials Research, Stafa-Zurich, Switzerland, C1

journal
2013

Static recrystallization of strip cast alloys in the presence of complex nano-sulfide and nitride precipitates

S Malekjani, I Timokhina, J Wang, P Hodgson, N Stanford

(2013), Vol. 581, pp. 39-47, Materials science and engineering A, Amsterdam, The Netherlands, C1

journal

Three-dimensional atom probe microscopy study of interphase precipitation and nanoclusters in thermomechanically treated titanium-molybdenum steels

S Mukherjee, I Timokhina, C Zhu, S Ringer, P Hodgson

(2013), Vol. 61, pp. 2521-2530, Acta Materialia, C1

journal

Asymmetric rolling of interstitial-free steel using differential roll diameters. Part I: Mechanical properties and deformation textures

D Orlov, A Pougis, R Lapovok, L Toth, I Timokhina, P Hodgson, A Haldar, D Bhattacharjee

(2013), Vol. 44, pp. 4346-4359, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

journal

Addressing retained austenite stability in advanced high strength steels

E Pereloma, A Gazder, I Timokhina

(2013), Vol. 738-739, pp. 212-216, Materials Science Forum, C1

journal

On the low temperature strain aging of bainite in the TRIP steel

I Timokhina, H Beladi, X Xiong, P Hodgson

(2013), Vol. 44, pp. 5177-5191, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Berlin, Germany, C1

journal

Multiscale microstructure engineering of steels

P Hodgson, I Timokhina, H Beladi

(2013), Vol. 29, pp. 1152-1157, Materials Science and Technology (United Kingdom), C1

journal

Atomic scale investigation of solutes and precipitates in high strength steels

P Hodgson, S Mukherjee, H Beladi, X Xiong, I Timokhina

(2013), Vol. 762, pp. 14-21, Materials Science Forum, C1

journal

A novel thermomechanical approach to produce a fine ferrite and low-temperature bainitic composite microstructure

H Beladi, I Timokhina, X Xiong, P Hodgson

(2013), Vol. 61, pp. 7240-7250, Acta Materialia, C1

journal

Selective dissolution of retained austenite in nanostructured bainitic steels

O Kazum, M Kannan, H Beladi, I Timokhina, P Hodgson, S Khoddam

(2013), Vol. 16, pp. 442-444, Advanced engineering materials, London, Eng., C1

journal
2012

Understanding the behavior of advanced high-strength steels using atom probe tomography

E Pereloma, H Beladi, L Zhang, I Timokhina

(2012), Vol. 43, pp. 3958-3971, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

journal

Local laser heat treatment in dual-phase steels

M Asadi, G Frommeyer, A Aghajani, I Timokhina, H Palkowski

(2012), Vol. 43, pp. 1244-1258, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

journal

The formation of ultrafine ferrite and low temperature bainite through thermomechanical processing

H Beladi, I Timokhina, P Hodgson

(2012), Vol. 706-709, pp. 2047-2052, Materials science forum, Stafa-Zurich, Switzerland, C1

journal

Asymmetric rolling of interstitial-free steel using one idle roll

R Lapovok, D Orlov, I Timokhina, A Pougis, L Toth, P Hodgson, A Haldar, D Bhattacharjee

(2012), Vol. 43, pp. 1328-1340, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

journal

Constitutive modeling of the tensile behavior of Al-TWIP steel

J Kim, Y Estrin, H Beladi, I Timokhina, K Chin, S Kim, B De Cooman

(2012), Vol. 43, pp. 479-490, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

journal

Development of asymmetric rolling for the better control over structure and mechanical properties in IF steel

D Orlov, R Lapovok, L Toth, I Timokhina, P Hodgson, D Bhattacharjee, A Haldar

(2012), Vol. 706-709, pp. 2788-2793, Materials science forum, Stafa-Zurich, Switzerland, C1

journal

Effect of bainitic transformation on bake hardening in TRIP assisted steel

S Das, I Timokhina, S Singh, E Pereloma, O Mohanty

(2012), Vol. 534, pp. 485-494, Materials Science and Engineering A, C1

journal

Effect of bake-hardening treatment on the mechanical properties of high strength bainitic steel produced by thermomechanical processing

I Timokhina, H Beladi, X Xiong, P Hodgson

(2012), Vol. 706-709, pp. 2332-2337, Materials science forum, Stafa-Zurich, Switzerland, C1

journal

CHARACTERIZATION OF NANO-STRUCTURED BAINITIC STEEL

HOSSEIN BELADI, ILANA TIMOKHINA, PETER HODGSON, YOSHITAKA ADACHI

(2012), Vol. 05, pp. 1-8, International Journal of Modern Physics: Conference Series, E1

conference

Microstructure-property relationship in the thermomechanically processed C-Mn-Si-Nb-Al-(Mo) transformation-induced plasticity steels before and after prestraining and bake hardening treatment

I Timokhina, M Enomoto, M Miller, E Pereloma

(2012), Vol. 43, pp. 2473-2483, Metallurgical and materials transactions A, New York, United States, C1

journal
2011

Nanoscale microstructural characterization of a nanobainitic steel

I Timokhina, H Beladi, X Xiong, Y Adachi, P Hodgson

(2011), Vol. 59, pp. 5511-5522, Acta Materialia, C1

journal

Three-dimensional atomic scale analysis of microstructures formed in high strength steels

I Timokhina, X Xiong, H Beladi, S Mukherjee, P Hodgson

(2011), Vol. 27, pp. 739-741, Materials science and technology, Leeds, U. K., C1

journal

Ultrafine ferrite formation through isothermal static phase transformation

H Beladi, I Timokhina, S Mukherjee, P Hodgson

(2011), Vol. 59, pp. 4186-4196, Acta Materialia, C1

journal

Application of advanced analytical techniques to study structure-property relationship of hot rolled high strength low alloy steel

I Timokhina, P Hodgson, S Ringer, R Zheng, E Pereloma

(2011), Vol. 27, pp. 305-309, Materials science and technology, West Yorkshire, U. K., C1

journal

Orientation dependence of twinning and strain hardening behaviour of a high manganese twinning induced plasticity steel with polycrystalline structure

H Beladi, I Timokhina, Y Estrin, J Kim, B De Cooman, S Kim

(2011), Vol. 59, pp. 7787-7799, Acta Materialia, C1

journal

Understanding of the bainite transformation in a nano-structured bainitic steel

P Hodgson, I Timokhina, X Xiong, A Yoshitaka, H Beladi

(2011), Vol. 172-174, pp. 123-128, Solid State Phenomena, C1

journal

Application of advanced experimental techniques for the microstructural characterization of nanobainitic steels

I Timokhina, H Beladi, X Xiong, Y Adachi, P Hodgson

(2011), Vol. 172-174, pp. 1249-1254, Solid State Phenomena, C1

journal

Effect of thermo-mechanical processing on precipitate formation in next generation HSLA steel

S Mukherjee, I Timokhina, C Zhu, S Ringer, P Hodgson

(2011), Vol. 18, pp. 478-481, Journal of iron and steel research international, [Beijing, China], C1

journal

Effect of thermomechanical processing on the microstructure and retained austenite stability during in situ tensile testing using synchrotron X-Ray diffraction of NbMoAl TRIP steel

E Pereloma, L Zhang, K Liss, U Garbe, J Almer, T Schambron, H Beladi, I Timokhina

(2011), Vol. 172-174, pp. 741-746, Solid State Phenomena, C1

journal
2010

Refinement of microstructure in steels through thermomechanical processing

H Beladi, I Timokhina, S Mukherjee, P Hodgson

(2010), Vol. 97-101, pp. 2163-2166, Advanced materials research, Stafa-Zurich, Switzerland, C1

journal

Characterization of the bake-hardening behavior of transformation induced plasticity and dual-phase steels using advanced analytical techniques

I Timokhina, E Pereloma, S Ringer, R Zheng, P Hodgson

(2010), Vol. 50, pp. 574-582, ISIJ International, C1

journal

Effect of manufacturing process on the final properties of advanced high strength steels for automotive applications

E Pereloma, I Timokhina, T Hilditch, P Hodgson

(2010), Vol. 638-642, pp. 148-153, Materials science forum, Stafa-Zurich, Switzerland, C1

journal

Nano-scale analysis of nano-bainite formed in advanced high strength steels

I Timokhina, H Beladi, X Xiong, E Pereloma, P Hodgson

(2010), Vol. 654-656, pp. 102-105, Materials Science Forum, C1

journal

Structure and mechanical properties of asymmetrically rolled IF steel sheet

D Orlov, R Lapovok, L Tth, I Timokhina, P Hodgson, D Bhattacharjee, A Haldar

(2010), Vol. 654-656, pp. 1255-1258, Materials science forum, Stafa-Zurich, Switzerland, C1

journal

Nanostructural engineering of steel

P Hodgson, I Timokhina, H Beladi, I Sabirov, E Pereloma

(2010), Vol. 81, pp. 33-38, steel research international, London, Eng., C1-1

journal
2009

Crystallographic analysis of nanobainitic steels

H Beladi, Y Adachi, I Timokhina, P Hodgson

(2009), Vol. 60, pp. 455-458, Scripta Materialia, C1

journal

Cyclic deformation of advanced high-strength steels: Mechanical behavior and microstructural analysis

T Hilditch, I Timokhina, L Robertson, E Pereloma, P Hodgson

(2009), Vol. 40, pp. 342-353, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

journal

Microstructure and mechanical properties of thermomechanically processed TRIP steel

I Timokhina, P Hodgson, H Beladi, E Pereloma

(2009), Vol. 101, pp. 43-48, Metallurgia Italiana, C1

journal

Effect of bake-hardening on the structure-property relationship of multiphase steels for the automotive industry

I Timokhina, P Hodgson, S Ringer, R Zheng, E Pereloma

(2009), Vol. 80, pp. 507-514, Steel research international, Weinheim, Germany, C1

journal

Effect of pre-straining and bake hardening on the microstructure and mechanical properties of CMnSi trip steels

L Zhang, I Timokhina, A La Fontaine, S Ringer, P Hodgson, E Pereloma

(2009), Vol. 101, pp. 49-55, Metallurgia Italiana, Milan, Italy, C1

journal

Plastic flow properties and microstructural evolution in an ultrafine-grained Al-Mg-Si alloy at elevated temperatures

B Kashyap, P Hodgson, Y Estrin, I Timokhina, M Barnett, I Sabirov

(2009), Vol. 40, pp. 3294-3303, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

journal

Deformation mechanisms in an ultra-fine grained al alloy

I Sabirov, M Barnett, Y Estrin, I Timokhina, P Hodgson

(2009), Vol. 100, pp. 1679-1685, Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, C1

journal

Deformation behaviour of ultrafine grained steel produced by cold rolling of martensite

S Malekjani, I Timokhina, I Sabirov, P Hodgson

(2009), Vol. 48, pp. 229-236, Canadian Metallurgical Quarterly, C1

journal
2008

Enhanced tensile ductility of an ultra-fine-grained aluminum alloy

I Sabirov, Y Estrin, M Barnett, I Timokhina, P Hodgson

(2008), Vol. 58, pp. 163-166, Scripta Materialia, C1

journal

Tensile deformation of an ultrafine-grained aluminium alloy: Micro shear banding and grain boundary sliding

I Sabirov, Y Estrin, M Barnett, I Timokhina, P Hodgson

(2008), Vol. 56, pp. 2223-2230, Acta Materialia, C1

journal

Deformation behaviour of an ultra-fine grained Al6082 alloy

I Sabirov, Y Estrin, M Barnett, I Timokhina, P Hodgson

(2008), Vol. 584-586 PART 2, pp. 703-707, Materials Science Forum, C1

journal

Processing and properties of ultrafine-grain aluminium alloy 6111 sheet

R Lapovok, I Timokhina, P McKenzie, R O'Donnell

(2008), Vol. 200, pp. 441-450, Journal of materials processing technology, Amsterdam, The Netherlands, C1-1

journal
2007

Three-dimensional atom probe analysis of solute distribution in thermomechanically processed TRIP steels

E Pereloma, I Timokhina, M Miller, P Hodgson

(2007), Vol. 55, pp. 2587-2598, Acta Materialia, C1

journal

Precipitate characterisation of an advanced high-strength low-alloy (HSLA) steel using atom probe tomography

I Timokhina, P Hodgson, S Ringer, R Zheng, E Pereloma

(2007), Vol. 56, pp. 601-604, Scripta Materialia, C1

journal

Characterization of nano-scale particles in hot-rolled, high strength low alloy steels (HSLA)

I Timokhina, P Hodgson, S Ringer, R Zheng, E Pereloma

(2007), Vol. 561-565, pp. 2083-2086, Materials science forum, Uetikon-Zuerich, Switzerland, C1

journal

Effect of initial processing on the microstructure-property relationships in bake-hardened C-Mn-Si TRIP steels

I Timokhina, E Pereloma, P Hodgson

(2007), Vol. 539-543, pp. 4315-4320, Materials science forum, Uetikon-Zuerich, Switzerland, C1

journal

Transmission electron microscopy characterization of the bake-hardening behavior of transformation-induced plasticity and dual-phase steels

I Timokhina, P Hodgson, E Pereloma

(2007), Vol. 38, pp. 2442-2454, Metallurgical and materials transactions A - Physical metallurgy and materials science, Warrendale, PA., C1

journal

Nano-scale microstructural characterisation of modern high strength steels for the automotive industry

I Timokhina, P Hodgson, S Ringer, R Zheng, E Pereloma

(2007), pp. 305-312, Proceedings of the International Conference on Microalloyed Steels: Processing, Microstructure, Properties and Performance, Pittsburgh, Pennsylvania, E1

conference

Microstructural characterization of warm rolled Cr-containing low carbon steel

E Pereloma, I Timokhina, J Jonas, M Miller

(2007), Vol. 56, pp. 521-524, Scripta materialia, Kidlington, Eng., C1-1

journal
2006

Characterization of clusters and ultrafine precipitates in Nb-containing C-Mn-Si steels

E Pereloma, I Timokhina, K Russell, M Miller

(2006), Vol. 54, pp. 471-476, Scripta materialia, Kidlington, Eng., C1-1

journal

Fine-scale microstructural investigations of warm rolled low-carbon steels with and without Cr, P, and B additions

E Pereloma, I Timokhina, J Jonas, M Miller

(2006), Vol. 54, pp. 4539-4551, Acta materialia, Kidlington, Eng., C1-1

journal
2005

TEM characterization of the recrystallization behaviour of warm rolled low carbon steels containing chromium during the early stages of annealing

I Timokhina, J Jonas, E Pereloma

(2005), Vol. 45, pp. 867-875, ISIJ international, Tokyo, Japan, C1-1

journal
2004

Effect of microstructure on the stability of retained austenite in transformation-induced-plasticity steels

I Timokhina, P Hodgson, E Pereloma

(2004), Vol. 35 A, pp. 2331-2341, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

journal

Role of Cr and P additions in the development of microstructure and texture in annealed low carbon steels

E Pereloma, I Timokhina, A Nosenkov, J Jonas

(2004), Vol. 43, pp. 149-154, Metalurgija, Zagreb, Croatia, C1-1

journal

Effect of alloying elements on the microstructure and texture of warm rolled steels

I Timokhina, A Nosenkov, A Humphreys, J Jonas, E Pereloma

(2004), Vol. 44, pp. 717-724, ISIJ international, Tokyo, Japan, C1-1

journal
2003

Effect of deformation schedule on the microstructure and mechanical properties of a thermomechanically processed C-Mn-Si transformation-induced plasticity steel

I Timokhina, P Hodgson, E Pereloma

(2003), Vol. 34A, pp. 1599-1609, Metallurgical and materials transactions. A, Physical metallurgy and materials science, Warrendale, PA, C1

journal
2002

Effect of strain and morphology of the bainitic microstructure on the retained austenite stability and mechanical properties of thermomechanically processed C-Mn-Si(-Nb) TRIP steels

I Timokhina, P Hodgson, E Pereloma

(2002), pp. 181-185, Proceedings of International Conference on Trip-Aided High Strength Ferrous Alloys, Ghent, Belgium, E1

conference

Effect of the thermomechanical processing parameters on the microstructure-property relationships in C-Mn-Si TRIP steel

I Timokhina, P Hodgson, E Pereloma

(2002), pp. 115-121, International Conference on Thermomechanical Processing: Mechanics, Microstructure & Control : 23-26 June 2002, the University of Sheffield, England : conference proceedings, Sheffield, England, E1

conference

Effect of alloying elements on the microstructure property relationship in thermomechanically processed C-Mn-Si TRIP steels

I Timokhina, P Hodgson, E Pereloma

(2002), Vol. 73, pp. 274-279, Steel research, Dsseldorf, Germany, C1

journal
2001

The effect of Nb, Mo, and A1 additions on the transformation behaviour and mechanical properties of thermomechanically processed C-Si-Mn trip steel

I Timokhina, P Hodgson, E Pereloma

(2001), pp. 57-62, Engineering materials 2001 : 23-26 September 2001, Melbourne, Australia : proceedings, Melbourne, Victoria, E1

conference

Microstructure and mechanical properties of thermomechanically processed C-Si-Mn steels

E Pereloma, I Timokhina, P Hodgson

(2001), Vol. 28, pp. 198-202, Ironmaking and steelmaking, London, England, C1

journal

Microstructure and mechanical properties of C-Si-Mn(-Nb) TRIP steels after simulated thermomechanical processing

I Timokhina, E Pereloma, P Hodgson

(2001), Vol. 17, pp. 135-140, Materials science and technology, Leeds, England, C1

journal
1999

Transformation behaviour in thermomechanically processed C-Mn-Si TRIP steels with and without Nb

E Pereloma, I Timokhina, P Hodgson

(1999), Vol. 273-275, pp. 448-452, Materials science and engineering: A, Amsterdam, The Netherlands, C1-1

journal

Funded Projects at Deakin

Australian Competitive Grants

Developing Light Weight Automotive Structures

Prof Peter Hodgson, Prof Michael Cardew-Hall, Prof Elena Pereloma, Prof Bernard Rolfe, Dr Ilana Timokhina

ARC_DUAPAI ARC_Deakin University Australian Postgraduate Award Industry, ARC_DUAPAI2 ARC_Deakin University Australian Postgraduate Award Industry Second, ARC Linkage - Projects Rnd 2 APAI APDI

  • 2009: $25,364
  • 2008: $50,160
  • 2007: $78,047
  • 2006: $182,166
  • 2005: $176,747
  • 2004: $87,723

A Microstructure Based Approach to Steel Design for Improved Crash Performance

Dr Ilana Timokhina, Prof Peter Hodgson

ARC - Discovery Projects

  • 2010: $98,375
  • 2009: $118,333
  • 2008: $130,485
  • 2007: $147,936

Enhanced Mechanical Properties of Steel Sheet through Novel Approach in Asymmetric Rolling

A/Prof Rimma Lapovok, Dr Ilana Timokhina, Prof Peter Hodgson, Prof Laszlo Toth, Mr Debashish Bhattacharjee, Mr Satyaveer Dhinwal

ARC Linkage - Projects Rnd 1

  • 2011: $26,140
  • 2010: $26,140
  • 2009: $26,140

A New Approach to Advanced Steels via Cluster and Precipitate Strengthening

Prof Peter Hodgson, Dr Ilana Timokhina, Michael Miller

ARC - Discovery Projects

  • 2017: $115,581
  • 2016: $109,215
  • 2015: $111,970

Other Public Sector Funding

New Energy-Saving Method of Swarf Upcycling into Titanium Alloys with Enhanced Properties

A/Prof Rimma Lapovok, Dr Ilana Timokhina

  • 2017: $12,000
  • 2016: $18,000

Recycling of Titanium-machined swarf to form high quality powder for additive manufacturing

A/Prof Rimma Lapovok, Dr Ilana Timokhina

  • 2017: $19,903

Literature Survey Fatigue study of small crack growth in Ti-6Al-4V

Dr Ilana Timokhina

  • 2017: $6,930

Industry and Other Funding

Developing Light Weight Automotive Structures

Prof Peter Hodgson, Prof Michael Cardew-Hall, Prof Elena Pereloma, Prof Bernard Rolfe, Dr Ilana Timokhina

  • 2009: $18,980
  • 2008: $45,000
  • 2007: $95,761
  • 2006: $77,880
  • 2005: $7,378

Enhanced Mechanical Properties of Steel Sheet through Novel Approach in Asymmetric Rolling

A/Prof Rimma Lapovok, Dr Ilana Timokhina, Prof Peter Hodgson, Prof Laszlo Toth, Mr Debashish Bhattacharjee, Mr Satyaveer Dhinwal

  • 2012: $6,000
  • 2011: $6,000
  • 2009: $6,000

Investigating materials on the atomic scale using 3-dimensional atom probe tomography

A/Prof Nicole Stanford, Prof Peter Hodgson, Dr Cui'E Wen, Prof John Beynon, Prof Ying (Ian) Chen, Prof Elena Pereloma, Dr Hossein Beladi, A/Prof Christopher Hutchinson, Dr Ilana Timokhina, Prof Christopher Davies, Dr Jian-Feng Nie

  • 2012: $450,000

Cluster Strengthened Steels

Prof Peter Hodgson, Dr Ilana Timokhina, Dr Hossein Beladi, Prof Lingxue Kong

  • 2019: $70,034
  • 2016: $132,334

Supervisions

Principal Supervisor
2015

Vadim Shterner

Thesis entitled: Temperature and Grain Orientation Dependence of Mechanical Twinning in a High Manganese TWIP Steel

Doctor of Philosophy (Engineering), Institute for Frontier Materials

Associate Supervisor
2019

Ilias Bikmukhametov

Thesis entitled: Investigation of clusters and nano-particles in thermomechanically processed Ti-Mo steel

Doctor of Philosophy (Engineering), Institute for Frontier Materials

2018

Sharmistha Dhara

Thesis entitled: Precipitation Behaviour in Ti-Mo Bearing Microalloyed Steel

Doctor of Philosophy (Engineering), Institute for Frontier Materials

2017

Khushboo Rakha

Thesis entitled: Phase Transformations in Nano-structured Bainitic Steels

Doctor of Philosophy (Engineering), Institute for Frontier Materials

2015

Satyaveer Dhinwal

Thesis entitled: Symmetric and Asymmetric Rolling of Low Carbon Steels

Doctor of Philosophy (Engineering), Institute for Frontier Materials

2012

Subrata Mukherjee

Thesis entitled: Nanoscale Precipitation in Advanced High Strength Steels

Doctor of Philosophy (Engineering), Institute for Frontier Materials