Dr Jiangting Wang

STAFF PROFILE

Position

Research Fellow, Focused Ion Beam

Faculty

Instit for Frontier Materials

Department

Instit for Frontier Materials

Campus

Geelong Waurn Ponds Campus

Contact

Units taught

  • FMB702 - Advanced Materials Characterisation - Focused ion beam
  • SEM712 - CAE and Finite Element Analysis (2012 - 2015)

Knowledge areas

  • Steel and magnesium alloy
  • Scanning electron microscopy (SEM)
  • Electron backscatter diffraction (EBSD)
  • Focused ion beam (FIB)
  • Transmission electron microscopy (TEM)
  • Atom probe tomography (APT)
  • Micro-compression and nanoindentation
  • Finite element method (FEM)
  • Molecular Dynamics (MD)

Publications

Filter by

2020

A parallel version of the cellular automata static recrystallization model dedicated for high performance computing platforms - Development and verification

M Sitko, Q Chao, J Wang, K Perzynski, K Muszka, L Madej

(2020), Vol. 172, pp. 1-13, Computational Materials Science, Amsterdam, The Netherlands, C1

journal article

On the Degradation of Retained Austenite in Transformation Induced Plasticity Steel

I Timokhina, A Gazder, J Wang, I Bikmukhametov, P Hodgson, F Niessen, E Pereloma

(2020), Vol. 51, pp. 3802-3810, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

journal article
2019

Transformation from cluster to nano-precipitate in microalloyed ferritic steel

J Wang, M Weyland, I Bikmukhametov, M Miller, P Hodgson, I Timokhina

(2019), Vol. 160, pp. 53-57, Scripta materialia, Amsterdam, The Netherlands, C1

journal article

Quantification of precipitate hardening of twin nucleation and growth in Mg and Mg-5Zn using micro-pillar compression

J Wang, M Ramajayam, E Charrault, N Stanford

(2019), Vol. 163, pp. 68-77, Acta Materialia, Amsterdam, The Netherlands, C1

journal article

The effect of strain on interphase precipitation characteristics in a Ti-Mo steel

I Bikmukhametov, H Beladi, J Wang, P Hodgson, I Timokhina

(2019), Vol. 170, pp. 75-86, Acta materialia, Amsterdam, The Netherlands, C1

journal article

Tuning CO2 conversion product selectivity of metal organic frameworks derived hybrid carbon photoelectrocatalytic reactors

J Maina, C Pozo-Gonzalo, J Schtz, J Wang, L Dume

(2019), Vol. 148, pp. 80-90, Carbon, Amsterdam, The Netherlands, C1

journal article

Identification of critical strains for the random cellular automata finite element failure model based on in-situ tensile test

K Perzynski, J Wang, K Radwanski, K Muszka, L Madej

(2019), Vol. 133, pp. 154-164, Mechanics of materials, Amsterdam, The Netherlands, C1

journal article

Study of Nb non-equilibrium segregation at prior austenite grain boundary in welding using atom probe tomography and modeling

H Wang, Z Tong, J Wang, P Hodgson, I Timokhina

(2019), Vol. 54, pp. 11320-11327, Journal of materials science, New York, N.Y., C1

journal article

Mechanical twinning and texture evolution during asymmetric warm rolling of a high manganese steel

F Brasche, J Wang, I Timokhina, C Haase, R Lapovok, D Molodov

(2019), Vol. 764, pp. 1-8, Materials Science and Engineering A, Amsterdam, The Netherlands, C1

journal article

Quantification of strain partitioning during low cycle fatigue of multi-phase steels containing a bainite matrix

N Stanford, J Wang, T Hilditch

(2019), Vol. 129, pp. 1-10, International Journal of Fatigue, Amsterdam, The Netherlands, C1

journal article

Considering influence of microstructure morphology of epoxy/glass composite on its behavior under deformation conditions-digital material representation case study

L Madej, L Malinowski, K Perzynski, M Mojzeszko, J Wang, G Cios, D Czarnecki, P Bala

(2019), Vol. 19, pp. 1304-1315, Archives of civil and mechanical engineering, Amsterdam, The Netherlands, C1

journal article

Through scale material flow investigation in novel incremental bulk forming process

J Szyndler, F Grosman, M Tkocz, L Delannay, J Wang, K Muszka, L Madej

(2019), pp. 1-11, Journal of Materials Processing Technology, Amsterdam, The Netherlands, C1

journal article
2018

Influence of rolling asymmetry on the microstructure, texture and mechanical behavior of high-manganese twinning-induced plasticity steel

F Berrenberg, J Wang, I Timokhina, C Haase, R Lapovok, D Molodov

(2018), Vol. 709, pp. 172-180, Materials science and engineering a, Amsterdam, The Netherlands, C1

journal article

Effects of hot-deformation on grain boundary precipitation and segregation in Ti-Mo microalloyed steels

J Wang, P Hodgson, I Bikmukhametov, M Miller, I Timokhina

(2018), Vol. 141, pp. 48-56, Materials and design, Amsterdam, The Netherlands, C1

journal article

Bulk hexagonal boron nitride with a quasi-isotropic thermal conductivity

S Mateti, K Yang, X Liu, S Huang, J Wang, L Li, P Hodgson, M Zhou, J He, Y Chen

(2018), Vol. 28, pp. 1-8, Advanced functional materials, Chichester, Eng., C1

journal article

High-performance biscrolled MXene/carbon nanotube yarn supercapacitors

Zhiyu Wang, Si Qin, Shayan Seyedin, Jizhen Zhang, Jiangting Wang, Ariana Levitt, Na Li, Carter Haines, Raquel Ovalle-Robles, Weiwei Lei, Yury Gogotsi, Ray Baughman, Joselito Razal

(2018), Vol. 14, pp. 1-9, Small, Chichester, Eng., C1

journal article

Characterization of Nb interface segregation during welding thermal cycle in microalloyed steel by atom probe tomography

H Wang, J Wang, Z Tong, P Hodgson, X Wan, K Wu, R Wei, I Timokhina

(2018), Vol. 49, pp. 6224-6230, Metallurgical and materials transactions A, Cham, Switzerland, C1

journal article
2017

Interfacial reactions between titanium and boron nitride nanotubes

M Bhuiyan, L Li, J Wang, P Hodgson, Y Chen

(2017), Vol. 127, pp. 108-112, Scripta materialia, Amsterdam, The Netherlands, C1

journal article

A critical assessment of work hardening in TWIP steels through micropillar compression

J Wang, N Stanford

(2017), Vol. 696, pp. 42-51, Materials science and engineering: A, Amsterdam, The Netherlands, C1

journal article

Anisotropic compressive behaviour of turbostratic graphite in carbon fibre

J Wang, N Salim, B Fox, N Stanford

(2017), Vol. 9, pp. 196-203, Applied materials today, Amsterdam, The Netherlands, C1-1

journal article

Validation of the dual-phase steel failure model at the microscale

Konrad Perzynski, Yuriy Ososkov, David Wilkinson, Mukesh Jain, Jiangting Wang, Lukasz Madej

(2017), Vol. 15, pp. 443-458, International Journal for Multiscale Computational Engineering, Danbury, Conn., C1-1

journal article

Boron nitride nanotube reinforced titanium metal matrix composites with excellent high-temperature performance

M Bhuiyan, J Wang, L Li, P Hodgson, A Agarwal, M Qian, Y Chen

(2017), Vol. 32, pp. 3744-3752, Journal of materials research, Cambridge, Eng., C1

journal article
2016

Enhanced mechanical response of an ultrafine grained Ti-6Al-4V alloy produced through warm symmetric and asymmetric rolling

Q Chao, P Cizek, J Wang, P Hodgson, H Beladi

(2016), Vol. 650, pp. 404-413, Materials science and engineering a, Amsterdam, The Netherlands, C1

journal article

Strain gradients in Cu-Fe thin films and multilayers during micropillar compression

J Wang, C Yang, P Hodgson

(2016), Vol. 651, pp. 146-154, Materials science and engineering: A, Amsterdam, The Netherlands, C1

journal article

On the Ti-Mo-Fe-C atomic clustering during interphase precipitation in the Ti-Mo steel studied by advanced microscopic techniques

I Timokhina, M Miller, J Wang, H Beladi, P Cizek, P Hodgson

(2016), Vol. 111, pp. 222-229, Materials and design, Amsterdam, The Netherlands, C1

journal article

Complex precipitation phenomena in strip cast steels with high sulfur and copper contents

T Dorin, A Taylor, K Wood, J Wang, P Hodgson, N Stanford

(2016), Vol. 49, pp. 1777-1785, Journal of applied crystallography, Chester, Eng., C1

journal article
2015

Mechanical Behavior of Nano-crystalline Metallic Thin Films and Multilayers Under Microcompression

J Wang, C Yang, P Hodgson

(2015), Vol. 46, pp. 1405-1412, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

journal article

Micromechanical modelling of bending under tension forming behaviour of dual phase steel 600

X Wei, S Asgari, J Wang, B Rolfe, H Zhu, P Hodgson

(2015), Vol. 108, pp. 72-79, Computational materials science, Amsterdam, The Netherlands, C1

journal article

Investigation of precipitate hardening of slip and twinning in Mg5%Zn by micropillar compression

J Wang, N Stanford

(2015), Vol. 100, pp. 53-63, Acta materialia, Amsterdam, The Netherlands, C1

journal article

Simultaneous improvement in the strength and corrosion resistance of Al via high-energy ball milling and Cr alloying

R Gupta, D Fabijanic, T Dorin, Y Qiu, J Wang, N Birbilis

(2015), Vol. 84, pp. 270-276, Materials and design, Amsterdam, The Netherlands, C1

journal article
2014

Improved contact load-bearing capacity of ultra-fine grained titanium : Multilayering and grading

D Yang, J Wang, D Fabijanic, J Lu, P Hodgson

(2014), Vol. 58, pp. 217-225, Materials and Design, Amsterdam, The Netherlands, C1

journal article

Numerical investigation of influence of the Martensite Volume Fraction on dp steels fracture behavior on the basis of digital material representation model

K Perzy?ski, ? Madej, J Wang, R Kuziak, P Hodgson

(2014), Vol. 45, pp. 5852-5865, Metallurgical and materials transactions A, Berlin, Germany, C1

journal article

Numerical modeling of dual phase microstructure behavior under deformation conditions on the basis of digital material representation

L Madej, J Wang, K Perzynski, P Hodgson

(2014), Vol. 95, pp. 651-662, Computational Materials Science, C1

journal article
2013

Ti-based amorphous/nanocrystal composite with high ductility and strain-hardening

D Yang, J Wang, D Fabijanic, P Cizek, B Li, J Lu, P Hodgson

(2013), Vol. 560, pp. 339-342, Materials Science and Engineering A, C1

journal article

Work hardening in ultrafine-grained titanium: Multilayering and grading

D Yang, P Cizek, D Fabijanic, J Wang, P Hodgson

(2013), Vol. 61, pp. 2840-2852, Acta Materialia, C1

journal article

Static recrystallization of strip cast alloys in the presence of complex nano-sulfide and nitride precipitates

S Malekjani, I Timokhina, J Wang, P Hodgson, N Stanford

(2013), Vol. 581, pp. 39-47, Materials Science and Engineering A, C1

journal article

Extrinsic size effect in microcompression of polycrystalline Cu/Fe multilayers

J Wang, C Yang, P Hodgson

(2013), Vol. 69, pp. 626-629, Scripta Materialia, C1

journal article
2012

Effects of mechanical properties on the contact profile in Berkovich nanoindentation of elastoplastic materials

J Wang, P Hodgson, C Yang

(2012), Vol. 27, pp. 313-319, Journal of Materials Research, C1

journal article

Experimental studies and modelling of the deformation behaviour of multiple nanolayers

J Wang, C Yang, P Hodgson

(2012), pp. 755-758, Steel research international, London, Eng., C1-1

journal article
2010

Effects of pores on shear bands in metallic glasses: A molecular dynamics study

J Wang, P Hodgson, J Zhang, W Yan, C Yang

(2010), Vol. 50, pp. 211-217, Computational Materials Science, C1

journal article
2009

Effects of quenching rate on amorphous structures of Cu46Zr54 metallic glass

J Wang, P Hodgson, J Zhang, W Yan, C Yang

(2009), Vol. 209, pp. 4601-4606, Journal of Materials Processing Technology, C1

journal article
2008

Residual thermal stresses in a Fe3Al/Al2O3 gradient coating system

J Wang, P Hodgson, J Zhang, C Yang

(2008), Vol. 32, pp. 71-74, Advanced Materials Research, C1

journal article

Sliding wear behavior of plasma sprayed Fe3Al-Al2O3 graded coatings

J Zhang, K Sun, J Wang, B Tian, H Wang, Y Yin

(2008), Vol. 516, pp. 5681-5685, Thin solid films, Amsterdam, The Netherlands, C1-1

journal article

Funded Projects at Deakin

No Funded Projects at Deakin found

Supervisions

No completed student supervisions to report