Dr Kamyar Shirvani Moghaddam

Radially aligned hierarchical N-doped porous carbon beads derived from oil-sand asphaltene for long-life water filtration and wastewater treatment

B Nasri-Nasrabadi, B Czech, R Yadav, K Shirvanimoghaddam, A Krzyszczak, V Unnikrishnan, M Naebe

(2023), Vol. 863, Science of the Total Environment, Netherlands, C1

Effects of melt-state shear homogenization on catalytic pyrolysis of mixed plastic waste for feedstock recycling

M Ahmadi, O Zabihi, H Nazarloo, K Shirvanimoghaddam, X Duan, P Adetunji, B Egan, M Naebe

(2023), Vol. 22, Materials Today Sustainability, C1

Enhanced PFAS adsorption with N-doped porous carbon beads from oil-sand asphaltene

B Czech, B Nasri-Nasrabadi, A Krzyszczak, I Sadok, M Hojamberdiev, R Yadav, K Shirvanimoghaddam, M Naebe

(2023), Vol. 54, Journal of Water Process Engineering, C1

Porous graphene/poly(vinylidene fluoride) nanofibers for pressure sensing

M Abolhasani, S Azimi, M Mousavi, S Anwar, M Hassanpour Amiri, K Shirvanimoghaddam, M Naebe, J Michels, K Asadi

(2022), Vol. 139, pp. 1-10, Journal of Applied Polymer Science, London, Eng., C1

Microwave synthesis of biochar for environmental applications

K Shirvanimoghaddam, B Czech, S Abdikheibari, G Brodie, M Kończak, A Krzyszczak, A Al-Othman, M Naebe

(2022), Vol. 161, pp. 1-25, Journal of Analytical and Applied Pyrolysis, Amsterdam, The Netherlands, C1

Facemask Global Challenges: The Case of Effective Synthesis, Utilization, and Environmental Sustainability

K Shirvanimoghaddam, B Czech, R Yadav, C Gokce, L Fusco, L Delogu, A Yilmazer, G Brodie, A Al-Othman, A Al-Tamimi, J Grout, M Naebe

(2022), Vol. 14, pp. 1-29, Sustainability, Basel, Switzerland, C1

Fight against COVID-19: The case of antiviral surfaces

K Shirvanimoghaddam, M Akbari, R Yadav, A Al-Tamimi, M Naebe

(2021), Vol. 9, APL Materials, United States, C1

Balancing the toughness and strength in polypropylene composites

K Shirvanimoghaddam, K Balaji, R Yadav, O Zabihi, M Ahmadi, P Adetunji, M Naebe

(2021), Vol. 223, Composites Part B: Engineering, C1

Sustainable synthesis of rose flower-like magnetic biochar from tea waste for environmental applications

K Shirvanimoghaddam, B Czech, K Tyszczuk-Rotko, M Kończak, S Fakhrhoseini, R Yadav, M Naebe

(2021), Vol. 34, pp. 13-27, Journal of Advanced Research, Amsterdam, The Netherlands, C1

Structure-rate performance relationship in Si nanoparticles-carbon nanofiber composite as flexible anode for lithium-ion batteries

V Ghanooni Ahmadabadi, K Shirvanimoghaddam, R Kerr, N Showkath, M Naebe

(2020), Vol. 330, Electrochimica Acta, C1

Death by waste: Fashion and textile circular economy case

K Shirvanimoghaddam, B Motamed, S Ramakrishna, M Naebe

(2020), Vol. 718, Science of the Total Environment, Netherlands, C1

Hierarchically Structured Porous Piezoelectric Polymer Nanofibers for Energy Harvesting

M Abolhasani, M Naebe, M Hassanpour Amiri, K Shirvanimoghaddam, S Anwar, J Michels, K Asadi

(2020), Vol. 7, Advanced Science, Germany, C1

Surface treatment of Basalt fiber for use in automotive composites

K Balaji, K Shirvanimoghaddam, G Rajan, A Ellis, M Naebe

(2020), Vol. 17, Materials Today Chemistry, C1

Ultrafast microwave assisted development of magnetic carbon microtube from cotton waste for wastewater treatment

S Fakhrhoseini, B Czech, K Shirvanimoghaddam, M Naebe

(2020), Vol. 606, Colloids and Surfaces A: Physicochemical and Engineering Aspects, C1

Sorption of pharmaceuticals and personal care products (PPCPs) onto a sustainable cotton based adsorbent

B Czech, K Shirvanimoghaddam, E Trojanowska, M naebe

(2020), Vol. 18, Sustainable Chemistry and Pharmacy, C1

Super hard carbon microtubes derived from natural cotton for development of high performance titanium composites

K Shirvanimoghaddam, E Ghasali, A Pakseresht, S Derakhshandeh, M Alizadeh, T Ebadzadeh, M Naebe

(2019), Vol. 775, pp. 601-616, Journal of Alloys and Compounds, Amsterdam, The Netherlands, C1

Sustainable carbon microtube derived from cotton waste for environmental applications

K Shirvanimoghaddam, B Czech, A Wiącek, W Ćwikła-Bundyra, M Naebe

(2019), Vol. 361, pp. 1605-1616, Chemical engineering journal, Amsterdam, The Netherlands, C1

The light enhanced removal of Bisphenol A from wastewater using cotton waste derived carbon microtubes

K Shirvanimoghaddam, B Czech, G Wójcik, M Naebe

(2019), Vol. 539, pp. 425-432, Journal of Colloid and Interface Science, United States, C1

Thermodynamic approach to tailor porosity in piezoelectric polymer fibers for application in nanogenerators

M Abolhasani, M Naebe, K Shirvanimoghaddam, H Fashandi, H Khayyam, M Joordens, A Pipertzis, S Anwar, R Berger, G Floudas, J Michels, K Asadi

(2019), Vol. 62, pp. 594-600, Nano energy, Amsterdam, The Netherlands, C1

Towards a Green and Self-Powered Internet of Things Using Piezoelectric Energy Harvesting

M Shirvanimoghaddam, K Shirvanimoghaddam, M Abolhasani, M Farhangi, V Zahiri Barsari, H Liu, M Dohler, M Naebe

(2019), Vol. 7, pp. 94533-94556, IEEE Access, C1

Towards predicting the piezoelectricity and physiochemical properties of the electrospun P(VDF-TrFE) nanogenrators using an artificial neural network

M Abolhasani, K Shirvanimoghaddam, H Khayyam, S Moosavi, N Zohdi, M Naebe

(2018), Vol. 66, pp. 178-188, Polymer Testing, London, Eng., C1

Periodical patterning of a fully tailored nanocarbon on CNT for fabrication of thermoplastic composites

K Shirvanimoghaddam, M Abolhasani, B Polisetti, M Naebe

(2018), Vol. 107, pp. 304-314, Composites Part A: Applied Science and Manufacturing, C1

Sustainable periodically patterned carbon nanotube for environmental application: introducing the cheetah skin structure

K Shirvanimoghaddam, B Czech, M Abolhasani, M Naebe

(2018), Vol. 179, pp. 429-440, Journal of cleaner production, Amsterdam, The Netherlands, C1

Thermomechanical performance of cheetah skin carbon nanotube embedded composite: isothermal and non-isothermal investigation

K Shirvanimoghaddam, B Polisetti, A Dasari, J Yang, S Ramakrishna, M Naebe

(2018), Vol. 145, pp. 294-309, Polymer, Amsterdam, The Netherlands, C1

Ultra-low temperature fabrication of vanadium carbide reinforced aluminum nano composite through spark plasma sintering

Ehsan Ghasali, Kamyar Shirvani Moghaddam, Masoud Alizadeh, Touradj Ebadzadeh

(2018), Vol. 753, pp. 433-445, Journal of alloys and compounds, Amsterdam, The Netherlands, C1

Porous and non-porous alumina reinforced magnesium matrix composite through microwave and spark plasma sintering processes

E Ghasali, M Alizadeh, K Shirvanimoghaddam, R Mirzajany, M Niazmand, A Faeghi-Nia, T Ebadzadeh

(2018), Vol. 212, pp. 252-259, Materials Chemistry and Physics, C1-1

Microwave and spark plasma sintering of carbon nanotube and graphene reinforced aluminum matrix composite

E Ghasali, P Sangpour, A Jam, H Rajaei, K Shirvanimoghaddam, T Ebadzadeh

(2018), Vol. 18, pp. 1042-1054, Archives of Civil and Mechanical Engineering, C1-1

Carbon fiber reinforced metal matrix composites: Fabrication processes and properties

K Shirvanimoghaddam, S Hamim, M Karbalaei Akbari, S Fakhrhoseini, H Khayyam, A Pakseresht, E Ghasali, M Zabet, K Munir, S Jia, J Davim, M Naebe

(2017), Vol. 92, pp. 70-96, Composites Part A: Applied Science and Manufacturing, C1

Al-TiB2 micro/nanocomposites: Particle capture investigations, strengthening mechanisms and mathematical modelling of mechanical properties

M Akbari, K Shirvanimoghaddam, Z Hai, S Zhuiykov, H Khayyam

(2017), Vol. 682, pp. 98-106, Materials Science and Engineering: A, C1

PVDF/graphene composite nanofibers with enhanced piezoelectric performance for development of robust nanogenerators

M Abolhasani, K Shirvanimoghaddam, M Naebe

(2017), Vol. 138, pp. 49-56, Composites Science and Technology, C1

Cheetah skin structure: A new approach for carbon-nano-patterning of carbon nanotubes

K Shirvanimoghaddam, M Abolhasani, Q Li, H Khayyam, M Naebe

(2017), Vol. 95, pp. 304-314, Composites Part A: Applied Science and Manufacturing, C1

Nano TiB2 and TiO2 reinforced composites: A comparative investigation on strengthening mechanisms and predicting mechanical properties via neural network modeling

M Karbalaei Akbari, K Shirvani Moghaddam, Z Hai, S Zhuiykov, H Khayyam

(2017), Vol. 43, pp. 16799-16810, Ceramics International, Amsterdam, The Netherlands, C1

Evaluation of microstructure and mechanical properties of Al-TaC composites prepared by spark plasma sintering process

E Ghasali, Kamyar Shirvani Moghaddam, A Pakseresht, M Alizadeh, T Ebadzadeh

(2017), Vol. 705, pp. 283-289, Journal of Alloys and Compounds, Amsterdam, The Netherlands, C1

Effect of B4C, TiB2 and ZrSiO4 ceramic particles on mechanical properties of aluminium matrix composites: Experimental investigation and predictive modelling

K Shirvanimoghaddam, H Khayyam, H Abdizadeh, M Karbalaei Akbari, A Pakseresht, F Abdi, A Abbasi, M Naebe

(2016), Vol. 42, pp. 6206-6220, Ceramics International, C1

Boron carbide reinforced aluminium matrix composite: Physical, mechanical characterization and mathematical modelling

K Shirvanimoghaddam, H Khayyam, H Abdizadeh, M Karbalaei Akbari, A Pakseresht, E Ghasali, M Naebe

(2016), Vol. 658, pp. 135-149, Materials Science and Engineering: A, C1

Vanadium carbide reinforced aluminum matrix composite prepared by conventional, microwave and spark plasma sintering

E Ghasali, A Pakseresht, M Alizadeh, K Shirvani Moghaddam, T Ebadzadeh

(2016), Vol. 688, pp. 527-533, Journal of alloys and compounds, Amsterdam, The Netherlands, C1

Functionally graded materials: A review of fabrication and properties

M Naebe, K Shirvanimoghaddam

(2016), Vol. 5, pp. 223-245, Applied Materials Today, C1

Development empirical-intelligent relationship between plasma spray parameters and coating performance of Yttria-Stabilized Zirconia

A Pakseresht, E Ghasali, M Nejati, K Shirvanimoghaddam, A Javadi, R Teimouri

(2015), Vol. 76, pp. 1031-1045, International Journal of Advanced Manufacturing Technology, C1-1

Wear and friction behavior of nanosized TiB2 and TiO2 particle-reinforced casting A356 aluminum nanocomposites: A comparative study focusing on particle capture in matrix

M Karbalaei Akbari, S Rajabi, K Shirvanimoghaddam, H Baharvandi

(2015), Vol. 49, pp. 3665-3681, Journal of Composite Materials, C1-1

Statistical analysis and multiobjective optimization of process parameters in plasma spraying of partially stabilized zirconia

A Pakseresht, A Javadi, M Nejati, K Shirvanimoghaddam, E Ghasali, R Teimouri

(2014), Vol. 75, pp. 739-753, International Journal of Advanced Manufacturing Technology, C1-1