Prof Lingxue Kong

Evolution of structural dimensions in mesoporous template precursor from hexagonal lyotropic liquid crystals

G Wang, C Garvey, J Zhang, L O'Dell, A Krause-Heuer, M Forsyth, T Darwish, S Milo?, L Kong

(2020), Vol. 32, pp. 1-11, Journal of physics. Condensed matter : an Institute of Physics journal, Amsterdam, The Netherlands, C1

Release of hazardous nanoplastic contaminants due to microplastics fragmentation under shear stress forces

M Enfrin, J Lee, Y Gibert, F Basheer, L Kong, L Dum�e

(2020), Vol. 384, pp. 1-9, Journal of Hazardous Materials, Amsterdam, The Netherlands, C1

Functionalized polyacrylonitrile fibers with durable antibacterial activity and superior Cu(II)-removal performance

Q Yang, X Guo, X Ye, H Zhu, L Kong, T Hou

(2020), Vol. 245, pp. 1-11, Materials Chemistry and Physics, Amsterdam, The Netherlands, C1

Relating forward water and reverse salt fluxes to membrane porosity and tortuosity in forward osmosis: CFD modelling

M Kahrizi, J Lin, G Ji, L Kong, C Song, L Dum�e, S Sahebi, S Zhao

(2020), Vol. 241, pp. 1-13, Separation and Purification Technology, Amsterdam, The Netherlands, C1

Aptamer-guided extracellular vesicle theranostics in oncology

P Tran, D Xiang, T Nguyen, T Tran, Q Chen, W Yin, Y Zhang, L Kong, A Duan, K Chen, M Sun, Y Li, Y Hou, Y Zhu, Y Ma, G Jiang, W Duan

(2020), Vol. 10, pp. 3849-3866, Theranostics, Sydney, N.S.W., C1

CO2 sponge from plasma enhanced seeded growth of metal organic frameworks across carbon nanotube bucky-papers

A Gholidoust, J Maina, A Merenda, J Sch�tz, L Kong, Z Hashisho, L Dum�e

(2019), Vol. 209, pp. 571-579, Separation and purification technology, Amsterdam, The Netherlands, C1

Discrete silver nanoparticle infusion across silica aerogels towards versatile catalytic coatings for 4-nitrophenol reduction

Z Yi, S Zhao, J Zhang, M She, L Kong, L Dum�e

(2019), Vol. 223, pp. 404-409, Materials chemistry and physics, Amsterdam, The Netherlands, C1

Deriving site-specific water quality criteria for ammonia from national versus international toxicity data

Zhihong Liu, Peidong Tai, Xiaojun Li, Lingxue Kong, Ty Matthews, Rebecca Lester, Julie Mondon

(2019), Vol. 171, pp. 665-676, Ecotoxicology and environmental safety, Amsterdam, The Netherlands, C1

Enhanced visible light sensitization of N-doped TiO2 nanotubes containing Ti-oxynitride species fabricated via electrochemical anodization of titanium nitride

A Merenda, A Rana, A Guirguis, D Zhu, L Kong, L Dum�e

(2019), Vol. 123, pp. 2189-2201, Journal of physical chemistry C, Washington, D.C., C1

Wrinkled silica doped electrospun nano-fiber membranes with engineered roughness for advanced aerosol air filtration

R Al-Attabi, Y Morsi, W Kujawski, L Kong, J Sch�tz, L Dum�e

(2019), Vol. 215, pp. 500-507, Separation and purification technology, Amsterdam, The Netherlands, C1

Fabrication of Pd-TiO2 nanotube photoactive junctions via Atomic Layer Deposition for persistent pesticide pollutants degradation

A Merenda, M Weber, M Bechelany, F Allioux, L Hyde, L Kong, L Dum�e

(2019), Vol. 483, pp. 219-230, Applied surface science, Amsterdam, The Netherlands, C1

Flexible hybrid structure piezoelectric nanogenerator based on ZnO nanorod/PVDF nanofibers with improved output

P Fakhri, B Amini, R Bagherzadeh, M Kashfi, M Latifi, N Yavari, S Asadi Kani, L Kong

(2019), Vol. 9, pp. 10117-10123, RSC Advances, Cambridge, Eng., C1

pH-responsive ultrasonic self-assembly spinosad-loaded nanomicelles and their antifungal activity to Fusarium oxysporum

E Dong, Z Yang, C Zhou, C Wang, S Li, Q Ouyang, L Kong, Z He, J Xie, P Li, P Yang

(2019), Vol. 141, pp. 123-132, Reactive and functional polymers, Amsterdam, The Netherlands, C1

Immobilisation of microperoxidase-11 into layered MoO3 for applications of enzymatic conversion

Y Wang, S Zhang, E Haque, B Zhang, J Ou, J Liu, Z Liu, Y Li, W Gao, F Haque, K Xu, H Wang, D Cahill, L Kong, W Yang

(2019), Vol. 16, pp. 185-192, Applied materials today, Amsterdam, The Netherlands, C1

Hybrid graphene-decorated metal hollow fibre membrane reactors for efficient electro-Fenton - Filtration co-processes

T Huong Le, L Dum�e, S Lacour, M Rivallin, Z Yi, L Kong, M Bechelany, M Cretin

(2019), Vol. 587, pp. 1-8, Journal of membrane science, Amsterdam, The Netherlands, C1

Fabrication and properties of elastic fibers from electrospinning natural rubber

Y Li, X Wang, Z Peng, P Li, C Li, L Kong

(2019), Vol. 136, pp. 1-7, Journal of applied polymer science, Chichester, Eng., C1

Mixed matrix poly(vinyl alcohol)-copper nanofibrous anti-microbial air-microfilters

E des Ligneris, L Dum�e, R Al-Attabi, E Castanet, J Sch�tz, L Kong

(2019), Vol. 9, pp. 1-14, Membranes, Basel, Switzerland, C1

Catalytic electrospun nano-composite membranes for virus capture and remediation

R Al-Attabi, J Rodriguez-Andres, J Sch�tz, M Bechelany, E des Ligneris, X Chen, L Kong, Y Morsi, L Dum�e

(2019), Vol. 229, pp. 1-9, Separation and purification technology, Amsterdam, The Netherlands, C1

Review on sperm sorting technologies and sperm properties toward new separation methods via the interface of biochemistry and material science

R Katigbak, G Turchini, S de Graaf, L Kong, L Dum�e

(2019), Vol. 3, pp. 1-16, Advanced Biosystems, London, Eng., C1

Exosomes and nanoengineering: a match made for precision therapeutics

Phuong Tran, Dongxi Xiang, Thao Tran, Wang Yin, Yumei Zhang, Lingxue Kong, Kuisheng Chen, Miaomiao Sun, Yong Li, Yingchun Hou, Yimin Zhu, Wei Duan

(2019), Advanced materials, Weinheim, Germany, C1

Perforation routes towards practical nano-porous graphene and analogous materials engineering

A Guirguis, J Maina, L Kong, L Henderson, A Rana, L Li, M Majumder, L Dum�e

(2019), Vol. 155, pp. 660-673, Carbon, C1

Atomically thin boron nitride as an ideal spacer for metal-enhanced fluorescence

W Gan, C Tserkezis, Q Cai, A Falin, S Mateti, M Nguyen, I Aharonovich, K Watanabe, T Taniguchi, F Huang, L Song, L Kong, Y Chen, L Li

(2019), Vol. 13, pp. 12184-12191, ACS Nano, Washington, D.C., C1

Nanoapplication of a resistance inducer to reduce phytophthora disease in pineapple (Ananas comosus l.)

X Lu, D Sun, J Rookes, L Kong, X Zhang, D Cahill

(2019), Vol. 10, pp. 1-14, Frontiers in Plant Science, Lausanne, Switzerland, C1

Sub-10-nm Mixed Titanium/Tantalum Oxide Nanoporous Films with Visible-Light Photocatalytic Activity for Water Treatment

A Merenda, L Kong, N Fahim, A Sadek, E Mayes, A Hawley, B Zhu, S Gray, L Dumee

(2019), Vol. 2, pp. 1951-1963, ACS Applied Nano Materials, Washington, D.C., C1

Tailored mesoporous silica nanoparticles for controlled drug delivery: platform fabrication, targeted delivery, and computational design and analysis

X She, L Chen, Z Yi, C Li, C He, C Feng, T Wang, S Shigdar, W Duan, L Kong

(2018), Vol. 16, pp. 976-989, Mini-reviews in medicinal chemistry, Beijing, China, C1

Effects of a volatile solvent with low surface tension combining with the silica network reinforcement on retention of LLC structure in polymer matrix

J Zhang, Z Xie, A Hill, W Cong, F She, W Gao, M Hoang, L Kong

(2018), Vol. 75, pp. 581-595, Polymer bulletin, Berlin, Germany, C1

The growth of high density network of MOF nano-crystals across macroporous metal substrates - solvothermal synthesis versus rapid thermal deposition

J Maina, C Pozo-Gonzalo, A Merenda, L Kong, J Sch�tz, L Dum�e

(2018), Vol. 427, pp. 401-408, Applied surface science, Amsterdam, The Netherlands, C1

High efficiency poly(acrylonitrile) electrospun nanofiber membranes for airborne nanomaterials filtration

R Al-Attabi, L Dum�e, L Kong, J Sch�tz, Y Morsi

(2018), Vol. 20, pp. 1-10, Advanced engineering materials, Chichester, Eng., C1

Synthesis of Mn3O4 nano-materials via CTAB/SDS vesicle templating for high performance supercapacitors

Y Qiao, Q Sun, O Sha, X Zhang, Y Tang, T Shen, L Kong, W Gao

(2018), Vol. 210, pp. 128-132, Materials letters, Amsterdam, The Netherlands, C1

Electro-capture of heavy metal ions with carbon cloth integrated microfluidic devices

F Allioux, P Kapruwan, N Milne, L Kong, J Fattaccioli, Y Chen, L Dum�e

(2018), Vol. 194, pp. 26-32, Separation and purification technology, Amsterdam, The Netherlands, C1

Delivery of abscisic acid to plants using glutathione responsive mesoporous silica nanoparticles

D Sun, H Hussain, Z Yi, J Rookes, L Kong, D Cahill

(2018), Vol. 18, pp. 1615-1625, Journal of nanoscience and nanotechnology, Valencia, Calif., C1

Nanofiber-based materials for persistent organic pollutants in water remediation by adsorption

E des Ligneris, L Dum�e, L Kong

(2018), Vol. 8, Applied sciences, Basel, Switzerland, C1

Mesoporous silica nanorods toward efficient loading and intracellular delivery of siRNA

L Chen, X She, T Wang, S Shigdar, W Duan, L Kong

(2018), Vol. 20, pp. 1-13, Journal of nanoparticle research, Cham, Switzerland, C1

Modified iron phosphate/polyvinyl alcohol composite film for controlled-release fertilisers

Y Zhang, Z Yi, L Wei, L Kong, L Wang

(2018), Vol. 8, pp. 18146-18152, RSC advances, Cambridge, Eng., C1

Single step synthesis of Schottky-like hybrid graphene - titania interfaces for efficient photocatalysis

Zhifeng Yi, Andrea Merenda, Lingxue Kong, Aleksandra Radenovic, Mainak Majumder, Ludovic Dum�e

(2018), Vol. 8, pp. 1-10, Scientific reports, London, Eng., C1

Tuning micro-wrinkled graphene films for stretchable conductors of controllable electrical conductivity

C Feng, Z Yi, L Dum�e, F She, Z Peng, W Gao, L Kong

(2018), Vol. 139, pp. 672-679, Carbon, Amsterdam, The Netherlands, C1

Plasma modification and synthesis of membrane materials-a mechanistic review

Jingshi Wang, Xiao Chen, Rackel Reis, Zhiqiang Chen, Nick Milne, Bjorn Winther-Jensen, Lingxue Kong, Ludovic Dum�e

(2018), Vol. 8, pp. 1-38, Membranes, Basel, Switzerland, C1

Sub-50?nm amorphous iron phosphate dihydrate nanoplates fabricated via liquid exfoliation from recycled steelmaking phosphate slag

Y Zhang, Z Yi, J Wang, L Wei, L Kong, L Wang

(2018), Vol. 233, pp. 290-293, Materials letters, Amsterdam, The Netherlands, C1

Short review on porous metal membranes-fabrication, commercial products, and applications

Bo Zhu, Mikel Duke, Ludovic Dum�e, Andrea Merenda, Elise des Ligneris, Lingxue Kong, Peter Hodgson, Stephen Gray

(2018), Vol. 8, pp. 1-27, Membranes, Basel, Switzerland, C1

An in-situ small angle x ray scattering analysis of nanopore formation during thermally induced chemical dealloying of brass thin foils

Bao Lin, Max D�beli, Stephen Mudie, Adrian Hawley, Peter Hodgson, Lingxue Kong, Ralph Spolenak, Ludovic Dum�e

(2018), Vol. 8, Scientific reports, London, Eng., C1

In situ SAXS measurement and molecular dynamics simulation of magnetic alignment of hexagonal LLC nanostructures

Weiwei Cong, Weimin Gao, Christopher Garvey, Ludovic Dum�e, Juan Zhang, Ben Kent, Guang Wang, Fenghua She, Lingxue Kong

(2018), Vol. 8, pp. 1-12, Membranes, Basel, Switzerland, C1

In situ SAXS measurement and molecular dynamics simulation of magnetic alignment of hexagonal LLC nanostructures

Weiwei Cong, Weimin Gao, Christopher Garvey, Ludovic Dumee, Juan Zhang, Ben Kent, Guang Wang, Fenghua She, Lingxue Kong

(2018), Vol. 8, pp. 1-12, Membranes, Basel, Switzerland, C1

Numerical investigation of erosion of tube sheet and tubes of a shell and tube heat exchanger

W Gao, Y Li, L Kong

(2017), Vol. 96, pp. 115-127, Computers and Chemical Engineering, C1

One-pot synthesized mesoporous Ni-Co hydroxide for high performance supercapacitors

Y Qiao, P Jia, X Zhang, N Cai, T Shen, X Hao, Y Tang, X Wang, L Kong, W Gao

(2017), Vol. 23, pp. 1229-1238, Ionics, Berlin, Germany, C1

Hybrid thin film nano-composite membrane reactors for simultaneous separation and degradation of pesticides

L Dum�e, J Maina, A Merenda, R Reis, L He, L Kong

(2017), Vol. 528, pp. 217-224, Journal of Membrane Science, C1

Controlled porosity and pore size of nano-porous gold by thermally assisted chemical dealloying - a SAXS study

B Lin, L Kong, P Hodgson, S Mudie, A Hawley, L Dum�e

(2017), Vol. 7, pp. 10821-10830, RSC Advances, C1

Insights into Free Volume Variations across Ion-Exchange Membranes upon Mixed Solvents Uptake by Small and Ultrasmall Angle Neutron Scattering

F Allioux, C Garvey, C Rehm, B Tardy, R Dagastine, P Hodgson, L Kong, L Dum�e

(2017), Vol. 9, pp. 8704-8713, ACS Applied Materials and Interfaces, C1

Silver metal nano-matrixes as high efficiency and versatile catalytic reactors for environmental remediation

L Dumee, Z Yi, B Tardy, A Merenda, E des Ligneris, R Dagastine, L Kong

(2017), Vol. 7, pp. 1-10, Scientific reports, London, Eng., C1

Homogeneous isolation of nanocellulose from eucalyptus pulp by high pressure homogenization

Y Wang, X Wei, J Li, F Wang, Q Wang, Y Zhang, L Kong

(2017), Vol. 104, pp. 237-241, Industrial Crops and Products, C1

Metal organic framework based catalysts for CO? conversion

J Maina, C Pozo-Gonzalo, L Kong, J Sch�tz, M Hill, L Dum�e

(2017), Vol. 4, pp. 345-361, Materials Horizons, Cambridge, Eng., C1

Plasmonic substrates for surface enhanced Raman scattering

W Li, X Zhao, Z Yi, A Glushenkov, L Kong

(2017), Vol. 984, pp. 19-41, Analytica chimica acta, Amsterdam, The Netherlands, C1-1

Aptamer-mediated survivin RNAi enables 5-fluorouracil to eliminate colorectal cancer stem cells

H Al Shamaileh, T Wang, D Xiang, W Yin, P Tran, R Barrero, P-Z Zhang, Y Li, L Kong, K Liu, S-F Zhou, Y Hou, S Shigdar, W Duan

(2017), Vol. 7, pp. 1-9, Scientific reports, London, Eng., C1

Toward the fabrication of advanced nanofiltration membranes by controlling morphologies and mesochannel orientations of hexagonal lyotropic liquid crystals

G Wang, C Garvey, H Zhao, K Huang, L Kong

(2017), Vol. 7, pp. 1-20, Membranes, Basel, Switzerland, C1

Preparation of porous stainless steel hollow-fibers through multi-modal particle size sintering towards pore engineering

F-M Allioux, O David, M Etxeberria Benavides, L Kong, D Pacheco Tanaka, L Dum�e

(2017), Vol. 7, pp. 1-15, Membranes, Basel, Switzerland, C1

Inorganic nanoparticles/metal organic framework hybrid membrane reactors for efficient photocatalytic conversion of CO2

J Maina, J Sch�tz, L Grundy, E Des Ligneris, Z Yi, L Kong, C Pozo-Gonzalo, M Ionescu, L Dum�e

(2017), Vol. 9, pp. 35010-35017, ACS applied materials and interfaces, Washington, D.C., C1

Electro-catalytic biodiesel production from canola oil in methanolic and ethanolic solutions with low-cost stainless steel and hybrid ion-exchange resin grafted electrodes

F-M Allioux, B Holland, L Kong, L Dum�e

(2017), Vol. 4, pp. 1-10, Frontiers in materials, Lausanne, Switzerland, C1

Transforming doxorubicin into a cancer stem cell killer via EpCAM aptamer-mediated delivery

D Xiang, S Shigdar, A Bean, M Bruce, W Yang, M Mathesh, T Wang, W Yin, P Tran, H Shamaileh, R Barrero, P Zhang, Y Li, L Kong, K Liu, S Zhou, Y Hou, A He, W Duan

(2017), Vol. 7, pp. 4071-4086, Theranostics, Sydney, N.S.W., C1

Proton-exchange-induced configuration rearrangement in a poly(ionic liquid) solution: a NMR study

Haijin Zhu, Hengrui Yang, Jiaye Li, Kristine Barlow, Lingxue Kong, David Mecerreyes, Douglas MacFarlane, Maria Forsyth

(2017), Vol. 8, pp. 5355-5359, Journal of Physical Chemistry Letters, Washington, D.C., C1-1

Development of drug-loaded chitosan-vanillin nanoparticles and its cytotoxicity against HT-29 cells

P-W Li, G Wang, Z-M Yang, W Duan, Z Peng, L-X Kong, Q-H Wang

(2016), Vol. 23, pp. 30-35, Drug delivery, Abingdon, Eng., C1

Manufacturing techniques and surface engineering of polymer based nanoparticles for targeted drug delivery to cancer

Y Wang, P Li, T Tran, J Zhang, L Kong

(2016), Vol. 6, pp. 1-18, Nanomaterials, Basel, Switzerland, C1

Nanoparticulate drug delivery to colorectal cancer : formulation strategies and surface engineering

T Tran, P Tran, Y Wang, P Li, L Kong

(2016), Vol. 22, pp. 2904-2912, Current pharmaceutical design, Beijing, China, C1

Mesoporous silica nanoparticles enhance seedling growth and photosynthesis in wheat and lupin.

D Sun, H Hussain, Z Yi, J Rookes, L Kong, D Cahill

(2016), Vol. 152, pp. 81-91, Chemosphere, Amsterdam , The Netherlands, C1

Formation of nanoscale titanium carbides in ferrite: an atomic study

Y Lv, P Hodgson, L Kong, W Gao

(2016), Vol. 122, pp. 1-5, Applied physics A: materials science and processing, Berlin, Germany, C1

Superhydrophobic and superoleophilic micro-wrinkled reduced graphene oxide as a highly portable and recyclable oil sorbent.

C Feng, Z Yi, F She, W Gao, Z Peng, C Garvey, L Dumee, L Kong

(2016), Vol. 8, pp. 9977-9985, ACS Applied materials and interfaces, Washington D.C., C1

Molecular dynamics approach to the structural characterization and transport properties of poly(acrylonitrile)/N,N-dimethylformamide solutions

W Gao, F She, J Zhang, L Dumee, K Tung, P Hodgson, L Kong

(2016), Vol. 219, pp. 45-53, Journal of molecular liquids, Amsterdam, The Netherlands, C1

Selective removal of anionic dyes using poly (N, N -dimethyl amino ethylmethacrylate) functionalized graphene oxide

C Li, H Zhu, X She, T Wang, F She, L Kong

(2016), Vol. 6, pp. 67242-67251, RSC Advances, London, Eng., C1

Ethephon increases rubber tree latex yield by regulating aquaporins and alleviating the tapping-induced local increase in latex total solid content

A Feng, J Rookes, G Xie, D Cahill, X Cai, Z Zou, L Kong

(2016), Vol. 35, pp. 701-709, Journal of plant growth regulation, New York, N.Y., C1

Insights into surface interactions between metal organic frameworks and gases during transient adsorption and diffusion by in-situ small angle x-ray scattering

L Dum�e, L He, P Hodgson, L Kong

(2016), Vol. 6, pp. 1-10, Membranes, Basel, Switzerland, C1

Ultrahigh volumetric capacitance biomorphic porous carbon material derived from mold

Y Qiao, H Wang, X Zhang, P Jia, T Shen, X Hao, Y Tang, X Wang, W Gao, L Kong

(2016), Vol. 184, pp. 252-256, Materials letters, Amsterdam, The Netherlands, C1

Targeted delivery of 5-fluorouracil to HT-29 cells using high efficient folic acid-conjugated nanoparticles.

Y Wang, P Li, L Chen, W Gao, F Zeng, L Kong

(2015), Vol. 22, pp. 191-198, Drug Delivery, England, C1

Simultaneous polymerization and crosslinking for the synthesis of molecular-level graphene oxide-polyacryl amide-CeOx composites

C Li, H Zhu, T Hou, J Vongsvivut, J Dai, F She, L Kong

(2015), Vol. 263, pp. 27-37, Chemical Engineering Journal, C1

Towards integrated anti-microbial capabilities: Novel bio-fouling resistant membranes by high velocity embedment of silver particles

L Dumee, L He, P King, M Moing, I G�ller, M Duke, P Hodgson, S Gray, A Poole, L Kong

(2015), Vol. 475, pp. 552-561, Journal of membrane science, Amsterdam, The Netherlands, C1

Nucleic acid aptamer-guided cancer therapeutics and diagnostics: the next generation of cancer medicine

D Xiang, S Shigdar, G Qiao, T Wang, A Kouzani, S Zhou, L Kong, Y Li, C Pu, W Duan

(2015), Vol. 5, pp. 23-42, Theranostics, Wyoming, N.S.W., C1

Biotemplated fabrication of a novel hierarchical porous C/LiFePO4/C composite for Li-ion batteries

J Song, L Wang, Z Ma, Z Du, G Shao, L Kong, W Gao

(2015), Vol. 5, pp. 1983-1988, RSC advances, Cambridge, Eng., C1

Fabrication of high specificity hollow mesoporous silica nanoparticles assisted by Eudragit for targeted drug delivery.

X She, L Chen, L Velleman, C Li, H Zhu, C He, T Wang, S Shigdar, W Duan, L Kong

(2015), Vol. 445, pp. 151-160, Journal of Colloid and Interface Science, United States, C1

Silver nanoparticles prepared by gamma irradiation across metal-organic framework templates

L He, L Dumee, D Liu, L Velleman, F She, C Banos, J Davies, L Kong

(2015), Vol. 5, pp. 10707-10715, RSC Advances, Cambridge, Eng., C1

Promoted water transport across graphene oxide-poly(amide) thin film composite membranes and their antibacterial activity

L He, L Dum�e, C Feng, L Velleman, R Reis, F She, W Gao, L Kong

(2015), Vol. 365, pp. 126-135, Desalination, C1

Study on LiFe1 - xSmxPO4/C used as cathode materials for lithium-ion batteries with low Sm component

W Wang, Y Qiao, L He, L Dumee, L Kong, M Zhao, W Gao

(2015), Vol. 21, pp. 2119-2125, Ionics, Berlin, Germany, C1

Functionalization of hollow mesoporous silica nanoparticles for improved 5-fu loading

X She, L Chen, C Li, C He, L He, L Kong

(2015), Vol. 2015, Journal of nanomaterials, New York, NY, C1

Growth of nano-textured graphene coatings across highly porous stainless steel supports towards corrosion resistant coatings

L Dumee, L He, Z Wang, P Sheath, J Xiong, C Feng, M Tan, F She, M Duke, S Gray, A Pacheco, P Hodgson, M Majumder, L Kong

(2015), Vol. 87, pp. 395-408, Carbon, C1

Effects of mucor mucedo on corncob decomposition in pyr-contaminated soil remediation

W Hou, L Zhang, X Ma, X Li, L Kong

(2015), Vol. 14, pp. 25-32, Nature Environment and Pollution Technology, C1

Investigation of hybrid ion-exchange membranes reinforced with non-woven metal meshes for electro-dialysis applications

F-M Allioux, L He, F She, P Hodgson, L Kong, L Dumee

(2015), Vol. 147, pp. 353-363, Separation and purification technology, Amsterdam, The Netherlands, C1

Latex dilution reaction during the tapping flow course of Hevea brasiliensis and the effect of Ethrel stimulation

F An, X Cai, J Rookes, G Xie, Z Zou, D Cahill, L Kong

(2015), Vol. 38, pp. 211-221, Brazilian journal of botany, New York, N. Y., C1

Study on nanocellulose by high pressure homogenization in homogeneous isolation

Y Wang, X Wei, J Li, F Wang, Q Wang, J Chen, L Kong

(2015), Vol. 16, pp. 572-578, Fibers and polymers, Seoul, Korea, C1

Understanding water and ion transport behaviour and permeability through poly(amide) thin film composite membrane

W Gao, F She, J Zhang, L Dum�e, L He, P Hodgson, L Kong

(2015), Vol. 487, pp. 32-39, Journal of Membrane Science, C1

Regulation of HbPIP2;3, a latex-abundant water transporter, is associated with latex dilution and yield in the rubber tree (Hevea brasiliensis Muell. Arg.)

F An, Z Zou, X Cai, J Wang, J Rookes, W Lin, D Cahill, L Kong

(2015), Vol. 10, pp. 1-21, PLoS one, San Francisco, Calif., C1

Functionalized mesoporous silica nanoparticles with redox-responsive short-chain gatekeepers for agrochemical delivery.

Z Yi, H Hussain, C Feng, D Sun, F She, J Rookes, D Cahill, L Kong

(2015), Vol. 7, pp. 9937-9946, ACS Applied Materials & Interfaces, United States, C1

Graphene networks and their influence on free-volume properties of graphene-epoxidized natural rubber composites with a segregated structure: rheological and positron annihilation studies

C He, X She, Z Peng, J Zhong, S Liao, W Gong, J Liao, L Kong

(2015), Vol. 17, pp. 12175-12184, Physical chemistry chemical physics, London, Eng., C1

Synthesis of LiFePO4@carbon nanotube core-shell nanowires with a high-energy efficient method for superior lithium ion battery cathodes

G Wang, Z Ma, G Shao, L Kong, W Gao

(2015), Vol. 291, pp. 209-214, Journal of Power Sources, C1

Mechanism of a green graphene oxide reduction with reusable potassium carbonate

D He, Z Peng, W Gong, Y Luo, P Zhao, L Kong

(2015), Vol. 5, pp. 11966-11972, RSC advances, Cambridge, Eng., C1

Decomposition properties of PVA/graphene composites during melting-crystallization

C Li, T Hou, X She, X Wei, F She, W Gao, L Kong

(2015), Vol. 119, pp. 178-189, Polymer degradation and stability, Amsterdam, The Netherlands, C1

In situ synthesis of natural rubber latex-supported gold nanoparticles for flexible SERS substrates

J Tao, D He, B Tang, L Kong, Y Luo, P Zhao, W Gong, Z Peng

(2015), Vol. 5, pp. 49168-49174, RSC Advances, Cambridge, Eng., C1

The control of epidermal growth factor grafted on mesoporous silica nanoparticles for targeted delivery

X She, L Chen, L Velleman, C Li, C He, J Denman, T Wang, S Shigdar, W Duan, L Kong

(2015), Vol. 3, pp. 6094-6104, Journal of materials chemistry B, Cambridge, Eng., C1

A new insight into growth mechanism and kinetics of mesoporous silica nanoparticles by in situ small angle x-ray scattering

Z Yi, L Dum�e, C Garvey, C Feng, F She, J Rookes, S Mudie, D Cahill, L Kong

(2015), Vol. 31, pp. 8478-8487, Langmuir, Washington, DC, C1

Superior performance of aptamer in tumor penetration over antibody : implication of aptamer-based theranostics in solid tumors

D Xiang, C Zheng, S Zhou, S Qiao, P Tran, C Pu, Y Li, L Kong, A Kouzani, J Lin, K Liu, L Li, S Shigdar, W Duan

(2015), Vol. 5, pp. 1083-1097, Theranostics, Sydney, N.S.W., C1

Microencapsulation of coupled folate and chitosan nanoparticles for targeted delivery of combination drugs to colon

P Li, Z Yang, Y Wang, Z Peng, S Li, L Kong, Q Wang

(2015), Vol. 32, pp. 40-45, Journal of microencapsulation, London, Eng, C1

Study of growth mechanism of TiC cluster in ferrite via molecular dynamics simulation

Y Lv, P Hodgson, L Kong, W Gao

(2015), Vol. 159, pp. 389-391, Materials letters, Amsterdam, The Netherlands, C1

Overcoming acquired drug resistance in colorectal cancer cells by targeted delivery of 5-FU with EGF grafted hollow mesoporous silica nanoparticles

L Chen, X She, T Wang, L He, S Shigdar, W Duan, L Kong

(2015), Vol. 7, pp. 14080-14092, Nanoscale, Cambridge, Eng., C1

Shrinkage induced stretchable micro-wrinkled reduced graphene oxide composite with recoverable conductivity

C Feng, Z Yi, L Dumee, C Garvey, F She, B Lin, S Lucas, J Sch�tz, W Gao, Z Peng, L Kong

(2015), Vol. 93, pp. 878-886, Carbon, Amsterdam, The Netherlands, C1

Multifunctional polymer/porous boron nitride nanosheet membranes for superior trapping emulsified oils and organic molecules

D Liu, L He, W Lei, K Klika, L Kong, Y Chen

(2015), Vol. 2, pp. 1-6, Advanced materials interfaces, London, Eng., C1

Reinforcement and deformation behaviors of polyvinyl alcohol/graphene/montmorillonite clay composites

C Li, Y Li, X She, J Vongsvivut, J Li, F She, W Gao, L Kong

(2015), Vol. 118, pp. 1-8, Composites science and technology, Amsterdam, The Netherlands, C1

Preparation of size-selective Mn3O4 hexagonal nanoplates with superior electrochemical properties for pseudocapacitors

G Wang, Z Ma, Y Fan, G Shao, L Kong, W Gao

(2015), Vol. 17, pp. 23017-23025, Physical chemistry chemical physics, Cambridge, Eng., C1

Simultaneous crystallization and decomposition of PVA/MMT composites during non-isothermal process

C Li, T Hou, J Vongsvivut, Y Li, X She, F She, W Gao, L Kong

(2015), Vol. 618, pp. 26-35, Thermochimica acta, Amsterdam, The Netherlands, C1

Formation of defects in the graphite oxidization process: a positron study

W Gong, D He, Tao, P Zhao, L Kong, Y Luo, Z Peng, H Wang

(2015), Vol. 5, pp. 88908-88914, RSC advances, Cambridge, Eng., C1

EpCAM aptamer-mediated survivin silencing sensitized cancer stem cells to doxorubicin in a breast cancer model

T Wang, M Gantier, D Xiang, A Bean, M Bruce, S Zhou, M Khasraw, A Ward, L Wang, M Wei, H AlShamaileh, L Chen, X She, J Lin, L Kong, S Shigdar, W Duan

(2015), Vol. 5, pp. 1456-1472, Theranostics, Wyoming, N.S.W., C1

Control of partial coalescence of self-assembled metal nano-particles across lyotropic liquid crystals templates towards long range meso-porous metal frameworks design

L Dum�e, J Lemoine, A Ancel, N Hameed, L He, L Kong

(2015), Vol. 5, pp. 1766-1781, Nanomaterials, Basel, Switzerland, C1

Experimental verification of theoretical prediction of fiber to fiber contacts in electrospun multilayer nano-microfibrous assemblies: Effect of fiber diameter and network porosity

R Bagherzadeh, M Latifi, S Najar, L Kong

(2014), Vol. 43, pp. 483-495, Journal of Industrial Textiles, C1

The application of Cd Se/ZnS quantum dots and confocal laser scanning microscopy for three-dimensional imaging of nanofibrous structures

R Bagherzadeh, M Latifi, S Najar, M Tehran, L Kong

(2014), Vol. 43, pp. 496-510, Journal of Industrial Textiles, C1

Functionalization of polyvinyl alcohol hydrogels with graphene oxide for potential dye removal

C Li, M She, X She, J Dai, L Kong

(2014), Vol. 131, Journal of Applied Polymer Science, C1

Development and evaluation of novel flavour microcapsules containing vanilla oil using complex coacervation approach

Z Yang, Z Peng, J Li, S Li, L Kong, P Li, Q Wang

(2014), Vol. 145, pp. 272-277, Food Chemistry, C1

Inflammation and cancer stem cells

S Shigdar, Y Li, S Bhattacharya, M O'Connor, C Pu, J Lin, T Wang, D Xiang, L Kong, M Wei, Y Zhu, S Zhou, W Duan

(2014), Vol. 345, pp. 271-278, Cancer Letters, C1

Fabrication of polycarbonate microfluidic devices using a focusing and defocusing methods of CO2 laser system

T Ghandoori, W Gao, L Kong, S Dharmalingam

(2014), Vol. 6, pp. 50-55, Advanced science, engineering and medicine, Valencia, CA, C1

Non-isothermal crystallization kinetics of polyvinyl alcohol-graphene oxide composites

C Li, M She, L Kong

(2014), Vol. 446-447, pp. 206-209, Applied Mechanics and Materials, C1

Three-dimensional pore structure analysis of polycaprolactone nano-microfibrous scaffolds using theoretical and experimental approaches

R Bagherzadeh, M Latifi, L Kong

(2014), Vol. 102, pp. 903-910, Journal of Biomedical Materials Research - Part A, C1

Composite yarns fabricated from continuous needleless electrospun nanofibers

H Niu, W Gao, T Lin, X Wang, L Kong

(2014), Vol. 54, pp. 1495-1502, Polymer engineering and science, Hoboken, N. J., C1

Improved efficacy and reduced toxicity of doxorubicin encapsulated in sulfatide-containing nanoliposome in a glioma model

J Lin, S Shigdar, D Fang, D Xiang, M Wei, A Danks, L Kong, L Li, L Qiao, W Duan

(2014), Vol. 9, pp. 1-13, Plos One, San Francisco, CA, C1

Uptake and cellular distribution, in four plant species, of fluorescently labeled mesoporous silica nanoparticles

D Sun, H Hussain, Z Yi, R Siegele, T Cresswell, L Kong, D Cahill

(2014), Vol. 33, pp. 1389-1402, Plant cell reports, Berlin, Germany, C1

New insight into non-isothermal crystallization of PVA-graphene composites

C Li, J Vongsvivut, X She, Y Li, F She, L Kong

(2014), Vol. 16, pp. 22145-22158, Physical chemistry chemical physics, Cambridge, England, C1

Homogeneous isolation of nanocelluloses by controlling the shearing force and pressure in microenvironment

J Li, Y Wang, X Wei, F Wang, D Han, Q Wang, L Kong

(2014), Vol. 113, pp. 388-393, Carbohydrate polymers, London, England, C1

Sparse representation with multi-manifold analysis for texture classification from few training images

X Sun, J Wang, M She, L Kong

(2014), Vol. 32, pp. 835-846, Image and vision computing, Amsterdam , Netherlands, C1

Novel ultrathin nanoflake assembled porous MnO2/carbon strip microspheres for superior pseudocapacitors

G Wang, Y Liu, G Shao, L Kong, W Gao

(2014), Vol. 2, pp. 2191-2197, ACS sustainable chemistry and engineering, Washington, DC, C1

Preparation of pH- and salinity-responsive cellulose copolymer in ionic liquid

X Wei, G Chang, J Li, F Wang, L Cui, T Fu, L Kong

(2014), Vol. 21, pp. 1-6, Journal of polymer research, Dordrecht, Netherlands, C1

Fabrication of conductive elastic nanocomposites via framing intact interconnected graphene networks

Y Luo, P Zhao, Q Yang, D He, L Kong, Z Peng

(2014), Vol. 100, pp. 143-151, Composites science and technology, Doetinchem, Netherlands, C1

Retention of the original LLC structure in a cross-linked poly(ethylene glycol) diacrylate hydrogel with reinforcement from a silica network

J Zhang, Z Xie, M Hoang, A Hill, W Cong, F She, W Gao, L Kong

(2014), Vol. 10, pp. 5192-5200, Soft matter, Cambridge, England, C1

Characterization of structure and energy of TixCy cluster at early formation stage in iron matrix by molecular dynamics

Y Lv, P Hodgson, L Kong, W Gao

(2014), Vol. 608, pp. 40-44, Chemical physics letters, Amsterdam, Netherlands, C1

Variation of phloem turgor pressure in Hevea brasiliensis: an implication for latex yield and tapping system optimization

F An, W Lin, D Cahill, J Rookes, L Kong

(2014), Vol. 58, pp. 182-187, Industrial crops and products, Amsterdam, Netherlands, C1

Molecular dynamics study of response of liquid N,N-dimethylformamide to externally applied electric field using a polarizable force field.

W Gao, H Niu, T Lin, X Wang, L Kong

(2014), Vol. 140, pp. 1-12, Journal of Chemical Physics, College Park, United States, C1

Surface modification and properties analysis of shell powder with sodium stearate surface modifier

Z Yang, P Li, Z Peng, X Gu, L Kong, S Li

(2014), Vol. 912-914, pp. 352-355, Advanced Materials Research, Lausanne, Switzerland, C1

Real-time measurement of phloem turgor pressure in Hevea brasiliensis with a modified cell pressure probe

F An, D Cahill, J Rookes, W Lin, L Kong

(2014), Vol. 55, pp. 1-11, Botanical Studies, London, Eng., C1

Single step preparation of meso-porous and reduced graphene oxide by gamma-ray irradiation in gaseous phase

L Dum�e, C Feng, L He, Z Yi, F She, Z Peng, W Gao, C Banos, J Davies, C Huynh, S Hawkins, M Duke, S Gray, P Hodgson, L Kong

(2014), Vol. 70, pp. 313-318, Carbon, London, England, C1

Electrically conductive graphene-filled polymer composites with well organized three-dimensional microstructure

P Zhao, Y Luo, J Yang, D He, L Kong, P Zheng, Q Yang

(2014), Vol. 121, pp. 74-77, Materials letters, Amsterdam, Netherlands, C1

Kinetic model for thermal dehydrochlorination of chlorinated natural rubber with different chlorine content

J Chen, L He, Y Chen, J Zhong, C He, L Kong

(2014), Vol. 87, pp. 370-382, Rubber chemistry and technology, Akron, Oh., C1

Fabrication of meso-porous sintered metal thin films by selective etching of silica based sacrificial template

Ludovic Dumee, Fenghua She, Mikel Duke, Stephen Gray, Peter Hodgson, Lingxue Kong

(2014), Vol. 4, pp. 686-699, Nanomaterials, Basel, Switzerland, C1

Effect of magnetic treatment on microstructure and cycle performance of LiFePO4/C cathode material

Y Qiao, L Pan, P Jia, H Wang, L Kong, W Gao, X Wang

(2014), Vol. 137, pp. 432-434, Materials letters, Amsterdam, Netherlands, C1

Tuning the grade of graphene: Gamma ray irradiation of free-standing graphene oxide films in gaseous phase

L Dum�e, C Feng, L He, F-M Allioux, Z Yi, W Gao, C Banos, J Davies, L Kong

(2014), Vol. 322, pp. 126-135, Applied Surface Science, Amsterdam, The Netherlands, C1

Synthesis of single-crystalline LiFePO4 with rhombus-like morphology

Y Qiao, L Pan, L He, L Dum�e, L Kong, M Zhao, L Wang, W Gao

(2014), pp. 1-5, Ionics, Heidelberg, Germany, C1

Qualitative spectroscopic characterization of the matrix-silane coupling agent interface across metal fibre reinforced ion exchange resin composite membranes

L Dum�e, F-M Allioux, R Reis, M Duke, S Gray, M Tobin, L Puskar, L He, P Hodgson, L Kong

(2014), Vol. 75, pp. 203-212, Vibrational Spectroscopy, Amsterdam, The Netherlands, C1

Molecular-level dispersion of graphene into epoxidized natural rubber: Morphology, interfacial interaction and mechanical reinforcement

X She, C He, Z Peng, L Kong

(2014), Vol. 55, pp. 6803-6810, Polymer (United Kingdom), Amsterdam, The Netherlands, C1

Impact of the de-alloying kinetics and alloy microstructure on the final morphology of de-alloyed meso-porous metal films

Bao Lin, Lingxue Kong, Peter Hodgson, Ludovic Dumee

(2014), Vol. 4, pp. 856-878, Nanomaterials, Basel, Switzerland, C1

Microencapsulation of nanoparticles with enhanced drug loading for pH-sensitive oral drug delivery for the treatment of colon cancer

Y Wang, P Li, Z Peng, F She, L Kong

(2013), Vol. 129, pp. 714-720, Journal of Applied Polymer Science, C1

Three-dimensional pore structure analysis of nano/microfibrous scaffolds using confocal laser scanning microscopy

R Bagherzadeh, M Latifi, S Najar, M Tehran, L Kong

(2013), Vol. 101 A, pp. 765-774, Journal of Biomedical Materials Research - Part A, C1-1

The effect of concentrations and properties of phenanthrene, pyrene, and benzo(a)pyrene on desorption in contaminated soil aged for 1 year

X Li, S Shuang, X Li, L Kong, L Xu, P Tai, X Lin, C Jia, Z Gong

(2013), Vol. 13, pp. 375-382, Journal of Soils and Sediments, C1

Ammonium-assisted green fabrication of graphene/natural rubber latex composite

C Li, C Feng, Z Peng, W Gong, L Kong

(2013), Vol. 34, pp. 88-95, Polymer Composites, C1

RNA aptamers targeting cancer stem cell marker CD133

S Shigdar, L Qiao, S Zhou, D Xiang, T Wang, Y Li, L Lim, L Kong, L Li, W Duan

(2013), Vol. 330, pp. 84-95, Cancer Letters, C1

Sparse representation of local spatial-temporal features with dimensionality reduction for motion recognition

J Wang, X Sun, P Liu, M She, L Kong

(2013), Vol. 115, pp. 150-160, Neurocomputing, C1

Chitosan-modified PLGA nanoparticles with versatile surface for improved drug delivery

Y Wang, P Li, L Kong

(2013), Vol. 14, pp. 585-592, AAPS PharmSciTech, C1

CFD modeling of hydrodynamic characteristics of slug bubble flow in a flat sheet membrane bioreactor

P Wei, K Zhang, W Gao, L Kong, R Field

(2013), Vol. 445, pp. 15-24, Journal of Membrane Science, C1

Mesoporous silica nanoparticles as a biomolecule delivery vehicle in plants

H Hussain, Z Yi, J Rookes, L Kong, D Cahill

(2013), Vol. 15, Journal of Nanoparticle Research, C1

Thermal degradation kinetics and mechanism of epoxidized natural rubber

C He, Y Wang, Y Luo, L Kong, Z Peng

(2013), Vol. 33, pp. 331-335, Journal of Polymer Engineering, C1

Scale invariant texture classification via sparse representation

X Sun, J Wang, M She, L Kong

(2013), Vol. 122, pp. 338-348, Neurocomputing, C1

Characterization of carbon nanotube webs and yarns with small angle X-ray scattering: Revealing the yarn twist and inter-nanotube interactions and alignment

L Dum�e, K Sears, S Mudie, N Kirby, C Skourtis, J McDonnell, S Lucas, J Sch�tz, N Finn, C Huynh, S Hawkins, L Kong, P Hodgson, M Duke, S Gray

(2013), Vol. 63, pp. 562-566, Carbon, C1

Seeded growth of ZIF-8 on the surface of carbon nanotubes towards self-supporting gas separation membranes

L Dum�e, L He, M Hill, B Zhu, M Duke, J Sch�tz, F She, H Wang, S Gray, P Hodgson, L Kong

(2013), Vol. 1, pp. 9208-9214, Journal of Materials Chemistry A, C1

Ultrasound-assisted tapping of latex from Para rubber tree Hevea brasiliensis

F She, D Zhu, L Kong, J Wan, F An, W Lin

(2013), Vol. 50, pp. 803-808, Industrial Crops and Products, C1

Preparation and characterization of novel chitosan-based microcapsule containing patchouli oil

Z Yang, M Huang, Z Peng, Y Pang, L Kong, G Han, P Li

(2013), Vol. 7, pp. 473-476, Journal of Biobased Materials and Bioenergy, C1

Effect of ultrasonic wave on latex production and quality of rubber tree

D Zhu, W Lin, L Kong, M Chen, W Jing, J Qian, Y Deng, Z Li, L Lin

(2013), Vol. 419, pp. 360-365, Applied Mechanics and Materials, C1

Aptamers as theranostic agents: modifications, serum stability and functionalisation

S Shigdar, J Macdonald, M O'Connor, T Wang, D Xiang, H Al.Shamaileh, L Qiao, M Wei, S Zhou, Y Zhu, L Kong, S Bhattacharya, C Li, W Duan

(2013), Vol. 13, pp. 13624-13637, Sensors, Basel, Switzerland, C1

The fabrication and surface functionalization of porous metal frameworks-a review

L Dum�e, L He, B Lin, F Ailloux, J Lemoine, L Velleman, F She, M Duke, J Orbell, G Erskine, P Hodgson, S Gray, L Kong

(2013), Vol. 1, pp. 15185-15206, Journal of Materials Chemistry A, C1

A theoretical analysis and prediction of pore size and pore size distribution in electrospun multilayer nanofibrous materials

R Bagherzadeh, S Najar, M Latifi, M Tehran, L Kong

(2013), Vol. 101 A, pp. 2107-2117, Journal of biomedical materials research - part A, Hoboken, N. J., C1

Chlorination reaction kinetics of the low-concentration natural rubber latex

L He, J Zhong, J Chen, C Li, L Kong, X Liao, Y Li

(2013), Vol. 86, pp. 604-614, Rubber chemistry and technology, Akron, Ohio, C1-1

Natural rubber/multiwalled carbon nanotube composites developed with a combined self-assembly and latex compounding technique

Z Peng, C Feng, Y Luo, Y Li, Z Yi, L Kong

(2012), Vol. 125, pp. 3920-3928, Journal of Applied Polymer Science, C1

Transport properties of multi-layer fabric based on electrospun nanofiber mats as a breathable barrier textile material

R Bagherzadeh, M Latifi, S Najar, M Tehran, M Gorji, L Kong

(2012), Vol. 82, pp. 70-76, Textile Research Journal, C1

Preparation of nanoparticles by crosslinking folate conjugated chitosan with vanillin and its characterization

M Zhou, P Li, G Wang, Z Yang, Z Peng, L Kong

(2012), Vol. 466-467, pp. 454-457, Applied Mechanics and Materials, C1

Evolution of moisture management behavior of high-wicking 3D warp knitted spacer fabrics

R Bagherzadeh, M Gorji, M Latifi, P Payvandy, L Kong

(2012), Vol. 13, pp. 529-534, Fibers and Polymers, C1

Homogeneous isolation of nanocellulose from sugarcane bagasse by high pressure homogenization

J Li, X Wei, Q Wang, J Chen, G Chang, L Kong, J Su, Y Liu

(2012), Vol. 90, pp. 1609-1613, Carbohydrate Polymers, C1

Degradation of pyrene by immobilized microorganisms in saline-alkaline soil

S Wang, X Li, W Liu, P Li, L Kong, W Ren, H Wu, Y Tu

(2012), Vol. 24, pp. 1662-1669, Journal of Environmental Sciences (China), C1

A theoretical analysis for fiber contacts in multilayer nanofibrous assemblies

R Bagherzadeh, S Najar, M Latifi, M Tehran, L Kong

(2012), Vol. In press, pp. 1-6, Textile Research Journal, Thousand Oaks, Calif., C1

Reinforcement of natural rubber with core-shell structure silica-poly(Methyl Methacrylate) nanoparticles

Q Wang, Y Luo, C Feng, Z Yi, Q Qiu, L Kong, Z Peng

(2012), Vol. 2012, pp. 1-9, Journal of nanomaterials, Mumbai, India, C1

Structure retention in cross-linked poly(ethylene glycol) diacrylate hydrogel templated from a hexagonal lyotropic liquid crystal by controlling the surface tension

J Zhang, Z Xie, A Hill, F She, A Thornton, M Hoang, L Kong

(2012), Vol. 8, pp. 2087-2094, Soft Matter, C1

Photocatalytic degradation of phenanthrene on soil surfaces in the presence of nanometer anatase TiO2 under UV-light

J Gu, D Dong, L Kong, Y Zheng, X Li

(2012), Vol. 24, pp. 2122-2126, Journal of Environmental Sciences (China), C1

Atomic interaction of functionalized carbon nanotube-based nanofluids with a heating surface and its effect on heat transfer

W Gao, L Kong, P Hodgson

(2012), Vol. 55, pp. 5007-5015, International Journal of Heat and Mass Transfer, C1

Computational simulation of the influence of inert particles on incomplete combustion of methane at a low air factor

W Gao, L Kong, P Hodgson

(2012), Vol. 1, pp. 1-14, Materials Performance and Characterization, C1

Rubber latex yield and physiology of rubber tree with tea tree oil treatments

D Zhu, J Wang, L Kong, F She, A Feng, W Lin

(2012), Vol. 29, pp. 546-550, Journal of Zhejiang A&F University, Zhejiang, China, C1

Development of chitosan nanoparticles as drug delivery systems for 5-fluorouracil and leucovorin blends

P Li, Y Wang, Z Peng, F She, L Kong

(2011), Vol. 85, pp. 698-704, Carbohydrate Polymers, C1

Integrated fluid-thermal-structural numerical analysis for the quenching of metallic components

W Gao, D Fabijanic, T Hilditch, L Kong

(2011), Vol. 16, pp. 137-140, Journal of Shanghai Jiaotong University (Science), C1

Nanostructures generated from photopolymerization of poly(ethylene glycol) diacrylate templated from hexagonal lyotropic liquid crystals

J Zhang, Z Xie, F Hua She, M Hoang, A Hill, W Min Gao, L Kong

(2011), Vol. 120, pp. 1817-1821, Journal of Applied Polymer Science, C1

Synthesis and characterization of folate conjugated chitosan and cellular uptake of its nanoparticles in HT-29 cells

P Li, Y Wang, F Zeng, L Chen, Z Peng, L Kong

(2011), Vol. 346, pp. 801-806, Carbohydrate Research, C1

Involvement of rootstocks and their hydraulic conductance in the drought resistance of grafted rubber trees

A Feng, K Lingxue, G Lidan, W Zhenhui, L Weifu

(2011), Vol. 10, pp. 10393-10404, African Journal of Biotechnology, C1

Structure and properties of self-assembled narural rubber/multi-walled carbon nanotube composites

Z Peng, C Feng, Y Luo, Z Yi, L Kong

(2011), Vol. 26, pp. 807-811, Journal Wuhan University of Technology, Materials Science Edition, C1

Particle dynamics and heat transfer at workpiece surface in heat treatment fluidised beds

W Gao, L Kong, F She, P Hodgson

(2011), Vol. 264-265, pp. 1456-1461, Advanced Materials Research, C1

Preparation of constant viscosity natural rubber with mercaptan

Y Heping, Z Zongqiang, W Qifang, L Yongyue, Z Xia, K Linxue

(2011), Vol. 64, pp. 30-34, KGK Kautschuk Gummi Kunststoffe, C1-1

Structure and thermal stability of natural rubber reinforced with In Situ generated zinc sorbate

Z Zeng, Z Peng, L Kong, H Liu

(2011), Vol. 239-242, pp. 903-907, Advanced Materials Research, C1

Development of ligand incorporated chitosan nanoparticles for the selective delivery of 5-fluorouracil to colon

P Li, Z Peng, F She, L Kong

(2011), Vol. 197-198, pp. 238-241, Advanced Materials Research, C1

Directional Gaussian filter-based LBP descriptor for textural image classification

X Sun, J Wang, R Chen, L Kong, M She

(2011), Vol. 15, pp. 1771-1779, Procedia Engineering, C1

Formulation of vanillin cross-linked chitosan nanoparticles and its characterization

G Wang, P Li, Z Peng, M Huang, L Kong

(2011), Vol. 335-336, pp. 474-477, Advanced Materials Research, C1

Integral approach and numerical improvement to calculate carbon concentration profiles in carburising

W Gao, L Kong, P Hodgson

(2011), Vol. 264-265, pp. 1494-1499, Advanced materials research, Lausanne, Switzerland, C1

3-Dimensional characterization of membrane with nanoporous structure using TEM tomography and image analysis

F She, K Nihara, W Gao, P Hodgson, H Jinnai, L Kong

(2010), Vol. 250, pp. 757-761, Desalination, C1

Amplification of SPPS150 and Salmonella typhi DNA with a high throughput oscillating flow polymerase chain reaction device

D Sugumar, A Ismail, M Ravichandran, I Aziah, L Kong

(2010), Vol. 4, Biomicrofluidics, C1

Simultaneous incorporation of 5-fluorouracil and leucovorin into chitosan nanoparticle as drug carrier and its characterization

P Li, Y Wang, Z Peng, L Kong

(2010), Vol. 654-656, pp. 2265-2268, Materials Science Forum, C1

Self-assembled natural rubber/multi-walled carbon nanotube composites using latex compounding techniques

Z Peng, C Feng, Y Luo, Y Li, L Kong

(2010), Vol. 48, pp. 4497-4503, Carbon, C1

Studies on the properties and the thermal decomposition kinetics of natural rubber prepared with calcium chloride

C Li, J Zhong, L Yang, S Li, L Kong, T Hou

(2010), Vol. 072, pp. 1-9, E-polymers, [Strasbourg, France], C1

Characterization of membranes with X-ray ultramicroscopy

F She, D Gao, W Gao, D Wu, Z Peng, M Hoang, L Kong

(2009), Vol. 236, pp. 179-186, Desalination, C1

Measurement of the mass transfer coefficient at workpiece surfaces in heat treatment furnaces

W Gao, L Kong, J Long, P Hodgson

(2009), Vol. 209, pp. 497-505, Journal of Materials Processing Technology, C1

Development of a contact probe incorporating a Bragg grating strain sensor for nano coordinate measuring machines

H Ji, H Hsu, L Kong, A Wedding

(2009), Vol. 20, Measurement Science and Technology, C1

Study on the properties of natural rubber during maturation

J Zhong, C Li, S Li, L Kong, Y Lei, S Liao, X She

(2009), Vol. 26, pp. 351-360, Journal of Polymer Materials, C1

Micro- and nano-characterization of membrane materials

F She, W Gao, Z Peng, P Hodgson, L Kong

(2008), Vol. 39, pp. 313-320, Journal of the Chinese Institute of Chemical Engineers, C1

Integrated optimization system for high pressure die casting processes

L Kong, F She, W Gao, S Nahavandi, P Hodgson

(2008), Vol. 201, pp. 629-634, Journal of materials processing technology, Zu?rich, Switzerland, C1

Natural rubber nanocomposite reinforced with nano silica

Y Chen, Z Peng, L Kong, M Huang, P Li

(2008), Vol. 48, pp. 1674-1677, Polymer Engineering and Science, C1

Calculation of effective pore diameters in porous filtration membranes with image analysis

F She, K Tung, L Kong

(2008), Vol. 24, pp. 427-434, Robotics and Computer-Integrated Manufacturing, C1-1

Computational simulation of gas flow and heat transfer near an immersed object in fluidized beds

W Gao, L Kong, P Hodgson

(2007), Vol. 38, pp. 826-834, Advances in engineering software, Barking, Essex, England, C1

Alternating heat transfer between objects of large geometrical difference

W Gao, L Kong, P Hodgson

(2007), Vol. 38, pp. 818-825, Advances in engineering software, Barking, Essex, England, C1

Finite element simulation of deformation processes of micro-components

W Gao, L Kong, P Hodgson

(2007), Vol. 21, pp. 1456-1463, Journal of mechanical science and technology, Germany, C1

A cFD-aided experimental study on bending of micro glass pipettes

W Xia, H Hsu, L Kong

(2007), Vol. 21, pp. 1338-1345, Journal of mechanical science and technology, Seoul, Korea, C1

An advanced virtual engineering educational program for engineering research and teaching excellence.

L Kong, S Hunter, G Lin

(2007), Vol. 35, pp. 148-165, The International journal of mechanical engineering education, Manchester, England, C1-1

Design and degradation modelling through artificial neural networks

H Lin, L Kong, H Hsu

(2007), Vol. 2, pp. 97-113, International journal of manufacturing research, Olney, England, C1-1

Morphology of self-assembled polyvinyl alcohol/silica nanocomposites studied with atomic force microscopy

Z Peng, L Kong

(2007), Vol. 59, pp. 207-216, Polymer Bulletin, C1-1

A thermal degradation mechanism of polyvinyl alcohol/silica nanocomposites

Z Peng, L Kong

(2007), Vol. 92, pp. 1061-1071, Polymer Degradation and Stability, C1-1

Self-assembled natural rubber/silica nanocomposites: Its preparation and characterization

Z Peng, L Kong, S Li, Y Chen, M Huang

(2007), Vol. 67, pp. 3130-3139, Composites Science and Technology, C1-1

A potential application of a piezoelectric atomiser for ophthalmic drug delivery

W Xia, H Hsu, L Kong, A Evans, R Lee

(2007), Vol. 4, pp. 9-17, Applied bionics and biomechanics, Abingdon, England, C1-1

Local total and radiative heat-transfer coefficients during the heat treatment of a workpiece in a fluidised bed

W Gao, L Kong, P Hodgson

(2006), Vol. 26, pp. 1463-1470, Applied thermal engineering, Oxford, United Kingdom, C1

Nanotechnology and its role in the management of periodontal diseases

L Kong, Z Peng, S Li, P Bartold

(2006), Vol. 40, pp. 184-196, Periodontology 2000, C1-1

Numerical analysis of heat transfer and the optimisation of regenerators

W Gao, P Hodgson, L Kong

(2006), Vol. 50, pp. 63-78, Numerical heat transfer, part A, Philadelphia, Pa., C1-1

Management of cardiovascular diseases with micro systems and nanotechnology

L Kong, Z Peng, D Sugumar

(2006), Vol. 6, pp. 2754-2761, Journal of Nanoscience and Nanotechnology, C1-1

Thermal degradation kinetics and morphology of natural rubber/silica nanocomposites

S Li, Z Peng, L Kong, J Zhong

(2006), Vol. 6, pp. 541-546, Journal of Nanoscience and Nanotechnology, C1-1

Poly(vinyl alcohol)/silica nanocomposites: Morphology and thermal degradation kinetics

Z Peng, L Kong, S Li, P Spiridonov

(2006), Vol. 6, pp. 3934-3938, Journal of Nanoscience and Nanotechnology, C1-1

Experimental investigation and numerical simulation of heat transfer in quenching fluidised beds

W Gao, L Kong, P Hodgson

(2005), Vol. 24, pp. 319-338, International Journal of Materials and Product Technology, C1

Non-isothermal crystallisation kinetics of self-assembled polyvinylalcohol/silica nano-composite

Z Peng, L Kong, S Li

(2005), Vol. 46, pp. 1949-1955, Polymer, C1-1

Dynamic mechanical analysis of polyvinylalcohol/silica nanocomposite

Z Peng, L Kong, S Li

(2005), Vol. 152, pp. 25-28, Synthetic Metals, C1-1

Investigation of nonisothermal crystallization behaviors of poly and silica nanocomposites using differential scanning calorimetry

L Kong, Z Peng

(2005), Vol. 295-296, pp. 39-44, Key Engineering Materials, C1-1

Secondary flow in a strong curved converging channel

L Kong, B Wang, F She

(2005), Vol. 9, pp. 58-63, Research journal of textile and apparel, Hung Hom, Hong Kong, C1-1

Development of a photolithography distribution scheme in semiconductor wafer fabrication

D Lung, L Kong, H Hsu

(2005), Vol. 8, pp. 115-122, International journal of agile manufacturing, Lafayette, La., C1-1

Study on thermooxidative degradation of poly(vinyl alcohol)/silica nanocomposite prepared with SAM technique

Z Peng, L Kong, S Li

(2005), Vol. 23, pp. 375-378, Journal of Metastable and Nanocrystalline Materials, C1-1

Development of a novel micro-spray-assembly process for multilayer ultra-thin film formation

Z Peng, L Kong

(2005), Vol. 23, pp. 331-334, Journal of Metastable and Nanocrystalline Materials, C1-1

Thermal properties and morphology of a poly(vinyl alcohol)/silica nanocomposite prepared with a self-assembled monolayer technique

Z Peng, L Kong, S Li

(2005), Vol. 96, pp. 1436-1442, Journal of Applied Polymer Science, C1-1

Isothermal crystallisation behaviour and kinetics of polyvinylalcohol/silica nanocomposite

Z Peng, L Kong, S Li

(2005), Vol. 152, pp. 321-324, Synthetic metals, Lausanne, Switzerland, C1-1

Objective measurement of wool fibre diameter based on staple textural features

F She, F Xia, W Zhang, L Kong

(2005), Vol. 9, pp. 29-33, Research journal of textile and apparel, Hung Hom, Hong Kong, C1-1

Influence of the geometry of an immersed steel workpiece on mass transfer coefficient in a chemical heat treatment fluidised bed

W Gao, J Long, L Kong, P Hodgson

(2004), Vol. 44, pp. 869-877, ISIJ international, Tokyo, Japan, C1

The application of self-assembly monolayer technique into fabricating multilayer nanofilm

Z Peng, L Kong

(2004), Vol. 3, pp. 649-654, International Journal of Nanoscience, C1-1

Numerical simulation of heat and mass transfer in fluidised bed heat treatment furnaces

W Gao, L Kong, P Hodgson

(2002), Vol. 125-126, pp. 170-178, Journal of materials processing technology, Amsterdam, Netherlands, C1

Intelligent Animal Fiber Classification with Artificial Neural Networks

F She, L Kong, S Nahavandi, A Kouzani

(2002), Vol. 72, pp. 594-600, Textile Research Journal, C1

Automatic inspection of metallic surface defects using genetic algorithms

H Zheng, L Kong, S Nahavandi

(2002), Vol. 125-126, pp. 427-433, Journal of Materials Processing Technology, C1

On-line tool condition monitoring and control system in forging processes

L Kong, S Nahavandi

(2002), Vol. 125-126, pp. 464-470, Journal of Materials Processing Technology, C1

Hydraulic radius of three dimensional woven fabric structures

L Kong, K Tung, C Chuang, W Lu

(2002), Vol. 33, pp. 297-305, Journal of the Chinese Institute of Chemical Engineers, C1-1

Material properties under drawing and extrusion with cyclic torsion

L Kong, L Lin, P Hodgson

(2001), Vol. 308, pp. 209-215, Materials Science and Engineering A, C1

Prediction of stress-strain behaviors in steels using an integrated constitutive, FEM and ANN model

L Kong, B Wang, P Hodgson

(2001), Vol. 41, pp. 795-800, ISIJ International, C1

Viscoplastic behaviour of porous bronzes and irons

B Wang, J Klepaczko, G Lu, L Kong

(2001), Vol. 113, pp. 574-580, Journal of Materials Processing Technology, C1

Identification and classification of animal fibres using artificial neural networks

F She, S Chow, B Wang, L Kong

(2001), Vol. 47, pp. 35-38, Journal of Textile Engineering, C1-1

Animal fibre classification

L Kong, F She, S Nahavandi, A Kouzani

(2001), Vol. 32, pp. 44-47, Textile Asia, Hong Kong, C1-1

Fibre transportation in confined channel with recirculations

L Kong, R Platfoot

(2000), Vol. 78, pp. 237-245, Computers and structures, Amsterdam, The Netherlands, C1-1

Predicting flow strength of austenitic steels with an IPANN model using different training strategies

L Kong, P Hodgson

(2000), Vol. 31, pp. 945-954, Advances in engineering software, Amsterdam, The Netherlands, C1-1

Constitutive modelling of extrusion of lead with cyclic torsion

L Kong, P Hodgson

(2000), Vol. 276, pp. 32-38, Materials Science and Engineering A, C1-1

Extrapolative prediction of the hot strength of austenitic steels with a combined constitutive and ANN model

L Kong, P Hodgson, D Collinson

(2000), Vol. 102, pp. 84-89, Journal of materials processing technology, Amsterdam, The Netherlands, C1-1

Development of constitutive models for metal forming with cyclic strain softening

L Kong, P Hodgson, B Wang

(1999), Vol. 89-90, pp. 44-50, Journal of Materials Processing Technology, Amsterdam, The Netherlands, C1-1

The application of constitutive and artificial neural network models to predict the hot strength of steels

L Kong, P Hodgson

(1999), Vol. 39, pp. 991-998, ISIJ International, Tokyo, Japan., C1-1

The prediction of the hot strength in steels with an integrated phenomenological and artificial neural network model

P Hodgson, L Kong, C Davies

(1999), Vol. 87, pp. 131-138, Journal of Materials Processing Technology, Amsterdam, The Netherlands, C1-1

Improvement of the prediction accuracy and efficiency of hot strength of austenitic steels with optimised ANN training schemes

B Wang, L Kong, P Hodgson, D Collinson

(1998), Vol. 4, pp. 823-826, Metals and materials international, Berlin, Germany, C1-1

The influence of roll speed on the rolling of metal plates

B Wang, W Hu, L Kong, P Hodgson

(1998), Vol. 4, pp. 915-919, Metals and materials, Seoul, Korea, C1-1

Modelling the effect of carbon content on hot strength of steels using a modified artificial neural network

L Kong, P Hodgson, D Collinson

(1998), Vol. 38, pp. 1121-1129, ISIJ international, Tokyo, Japan, C1-1

Computational two-phase air/fibre flow within transfer channels of rotor spinning machines

L Kong, R Platfoot

(1997), Vol. 67, pp. 269-278, Textile research journal, London, Eng., C1-1

Two-Dimensional Simulation of Air Flow in the Transfer Channel of Open-End Rotor Spinning Machines

L Kong, R Platfoot

(1996), Vol. 66, pp. 641-650, Textile Research Journal, C1-1