Prof Luke Henderson

Solvent-free surface modification of milled carbon fiber using resonant acoustic mixing

D Eyckens, D Hayne, L Henderson, S Howard, T Raeber, R Simons, A Wilde, D Yalcin, B Muir

(2024), Vol. 646, pp. 1-8, Applied Surface Science, Amsterdam, The Netherlands, C1

Improving carbon fibre reinforced polyphenylene sulfide using amine and phenolic interphase modifications

S Dabees, A Borkar, B Newman, Z Simon, D Hayne, P Coia, L Henderson

(2024), Vol. 179, pp. 1-12, Composites Part A: Applied Science and Manufacturing, Amsterdam, The Netherlands, C1

Reclamation and reformatting of waste carbon fibers: A paradigm shift towards sustainable waste management

P Heidarian, F Mokhtari, M Naebe, L Henderson, R Varley

(2024), Vol. 203, pp. 1-20, Resources, Conservation and Recycling, Amsterdam, The Netherlands, C1

Carbon fiber surface treatment for improved adhesion and performance of polydicyclopentadiene composites synthesized by ring opening metathesis polymerization

David Hayne, Matthew Singleton, Brendan Patterson, Daniel Knorr, Filip Stojcevski, Luke Henderson

(2024), Vol. 47, pp. 1-5, Composites Communications, Amsterdam, The Netherlands, C1

Tribological behaviour of surface modified carbon-fibre-reinforced polyphenylene sulphide under dry condition

S Dabees, Y Wickramasingha, B Dharmasiri, E Austria, B Akhavan, D Hayne, L Henderson

(2024), Vol. 194, pp. 1-19, Tribology International, Amsterdam, The Netherlands, C1

2D graphene oxide and MXene nanosheets at carbon fiber surfaces

K Adstedt, M Buxton, L Henderson, D Hayne, D Nepal, Y Gogotsi, V Tsukruk

(2023), Vol. 203, pp. 161-171, Carbon, C1

Hierarchically structured bioinspired nanocomposites

D Nepal, S Kang, K Adstedt, K Kanhaiya, M Bockstaller, L Brinson, M Buehler, P Coveney, K Dayal, J El-Awady, L Henderson, D Kaplan, S Keten, N Kotov, G Schatz, S Vignolini, F Vollrath, Y Wang, B Yakobson, V Tsukruk, H Heinz

(2023), Vol. 22, pp. 18-35, Nature Materials, England, C1

Promoting Silk Fibroin Adhesion to Stainless Steel Surfaces by Interface Tailoring

N Emonson, J Randall, B Allardyce, M Stanfield, B Dharmasiri, F Stojcevski, L Henderson

(2023), Vol. 88, ChemPlusChem, Germany, C1

Flexible carbon fiber based structural supercapacitor composites with solvate ionic liquid-epoxy solid electrolyte

B Dharmasiri, F Stojcevski, K Usman, Si Qin, J Razal, E Doeven, P Francis, T Connell, Y Yin, G Andersson, A Borkar, L Henderson

(2023), Vol. 455, pp. 1-13, Chemical Engineering Journal, Amsterdam, The Netherlands, C1

Imbuing carbon fibers with electrochemical storage properties without compromising fiber-to-matrix adhesion

M Stanfield, B Dharamasiri, J Randall, F Stojcevski, S Qin, J Razal, D Eyckens, L Henderson

(2023), Vol. 44, pp. 1902-1910, Polymer Composites, London, Eng., C1

A high value application of reclaimed carbon fibers: Environmental remediation and redeployment in structural composites

B Newman, E Doeven, P Francis, F Stojcevski, D Hayne, J Chalker, L Henderson

(2023), Vol. 35, pp. e00546-e00546, Sustainable Materials and Technologies, C1

Designing Carbon Fiber Composite Interfaces: Reactive Sizing Derived from Terpenes

Sujit Pawar, Sally Hutchinson, Daniel Eyckens, Filip Stojcevski, David Hayne, Jacqui Adcock, Paul Francis, Joselito Razal, Luke Henderson

(2023), Vol. 62, pp. 3157-3164, Industrial & Engineering Chemistry Research, Washington, D.C., C1

Cathodic Co-reactant Electrogenerated Chemiluminescence of Water-soluble Heteroleptic Iridium(III) Complexes Bearing N-Methyl(pyridyl)pyridinium Cyclometalating Ligands

Steven Blom, Timothy Connell, Egan Doeven, David Hayne, Emily Kerr, Luke Henderson, Paul Francis

(2023), Vol. 933, pp. 1-8, Journal of Electroanalytical Chemistry, Amsterdam, The Netherlands, C1

Robust Biocompatible Fibers from Silk Fibroin Coated MXene Sheets

K Usman, Y Yao, C Bacal, J Zhang, K Jarvis, P Lynch, P Mota-Santiago, S Qin, M Naebe, L Henderson, D Hegh, B Allardyce, J Razal

(2023), Vol. 10, pp. 1-12, Advanced Materials Interfaces, London, Eng., C1

Direct polymer grafting to surfaces and its application to interface tailoring in composites

M Stanfield, J Médard, P Decorse, C Combellas, F Kanoufi, L Henderson, D Hayne, F Stojcevski, F Podvorica, J Pinson

(2023), Vol. 619, pp. 1-7, Applied Surface Science, Amsterdam, The Netherlands, C1

Polymerically-enhanced nonwoven recycled carbon fibres used as capacitor electrodes

Ben Newman, Bhagya Dharmasiri, Filip Stojcevski, Ken Aldren S. Usman, Si Qin, Joselito Razal, Luke Henderson

(2023), Vol. 173, pp. 1-6, Composites Part A: Applied Science and Manufacturing, Amsterdam, The Netherlands, C1

Using Nitroxides to Enhance Carbon Fiber Interfacial Adhesion and as an Anchor for "Graft to" Surface Modification Strategies

Daniel Eyckens, Jacqui Adcock, James Blinco, Kathryn Fairfull‐Smith, Jessica Harris, Filip Vuković, Siyuan He, Bhagya Dharmasiri, Tiffany Walsh, Paul Francis, Andreas Hendlmeier, Luke Henderson

(2023), pp. 1-10, Macromolecular Rapid Communications, London, Eng., C1

Bioinspired Hard-Soft Interface Management for Superior Performance in Carbon Fibre Composites

B Newman, J Randall, R Varley, F Stojcevski, L Henderson

(2023), Fibers and Polymers, Berlin, Germany, C1

Carbon fibre surface modification facilitated by silver-catalysed radical decarboxylation

David Hayne, Bhagya Dharmasiri, Filip Stojcevski, Daniel Eyckens, Joel Hooper, Luke Henderson

(2023), Vol. 59, pp. 9860-9863, Chemical Communications, Cambridge, Eng., C1

Improving mechanical and life cycle environmental performances of recycled CFRP automotive component by fibre architecture preservation

D He, H Kim, S Sommacal, F Stojcevski, V Soo, W Lipiński, E Morozov, L Henderson, P Compston, M Doolan

(2023), Vol. 175, pp. 1-13, Composites Part A: Applied Science and Manufacturing, Amsterdam, The Netherlands, C1

Circular economy-driven additive manufacturing: A model for recycling PLA/copper composites through multi-extrusion processing

Z Simon, F Stojcevski, B Dharmasiri, L Henderson, N Amini

(2023), Journal of Industrial and Engineering Chemistry, C1

Ti3C2Tx MXene coated carbon fibre electrodes for high performance structural supercapacitors

B Dharmasiri, K Usman, S Qin, J Razal, N Tran, P Coia, T Harte, L Henderson

(2023), Vol. 476, pp. 1-13, Chemical Engineering Journal, Amsterdam, The Netherlands, C1

Accelerated lithium-ion diffusion via a ligand 'hopping' mechanism in lithium enriched solvate ionic liquids

Timothy Harte, Bhagya Dharmasiri, Garima Dobhal, Tiffany Walsh, Luke Henderson

(2023), pp. 1-10, Physical Chemistry Chemical Physics, Cambridge, Eng., C1

Synthesis and cure kinetics of bisoxazoline monomers during cationic ring-opening polymerization

S Issazadeh, M Khan, H Gan, J Zhang, L Henderson, R Varley

(2023), Journal of Applied Polymer Science, C1

Biomedical Applications of Electro-Initiated Polymerisation on Ti6Al4 V Titanium Alloy using Silk Fibroin Coatings for Antibiotic Delivery and Improved Cell Metabolism

N Emonson, B Dharmasiri, E Gordon, A Borkar, B Newman, Y Wickramasingha, P Coia, T Harte, J Newton, B Allardyce, F Stojcevski, D Kaplan, L Henderson

(2023), pp. e202300555-, ChemPlusChem, Germany, C1

Exploring Inverse Vulcanized Dicyclopentadiene As a Polymer Matrix for Carbon Fiber Composites

Y Wickramasingha, F Stojcevski, D Eyckens, D Hayne, J Chalker, L Henderson

(2023), pp. 1-8, Macromolecular Materials and Engineering, London, Eng., C1

Using surface grafted poly(acrylamide) to simultaneously enhance the tensile strength, tensile modulus, and interfacial adhesion of carbon fibres in epoxy composites

B Dharmasiri, J Randall, M Stanfield, Y Ying, G Andersson, D Nepal, D Hayne, L Henderson

(2022), Vol. 186, pp. 367-379, Carbon, Amsterdam, The Netherlands, C1

Surface modification of carbon fiber as a protective strategy against thermal degradation

Y Athulya Wickramasingha, B Dharmasiri, J Randall, Y Yin, G Andersson, D Nepal, B Newman, F Stojcevski, D Eyckens, L Henderson

(2022), Vol. 153, pp. 1-11, Composites Part A: Applied Science and Manufacturing, Amsterdam, The Netherlands, C1

A redox-mediator pathway for enhanced multi-colour electrochemiluminescence in aqueous solution

Emily Kerr, David Hayne, Lachlan Soulsby, Joseph Bawden, Steven Blom, Egan Doeven, Luke Henderson, Conor Hogan, Paul Francis

(2022), Vol. 13, pp. 469-477, Chemical Science, Cambridge, Eng., C1

Carbon reinforced carbon fibers: Using surface modification as a route to enhanced physical performance

B Dharmasiri, J Randall, Y Yin, G Andersson, E Doeven, P Francis, L Henderson

(2022), Vol. 218, pp. 1-9, Composites Science and Technology, Amsterdam, The Netherlands, C1

Investigation of the processability, thermal, mechanical and flame retardant properties of bisoxazoline composites

S Issazadeh, S Seraji, M Khan, H Gan, L Henderson, R Varley

(2022), Vol. 232, pp. 1-11, Composites Part B: Engineering, Amsterdam, The Netherlands, C1

Carbon Fiber Surface Functional Landscapes: Nanoscale Topography and Property Distribution

K Adstedt, F Stojcevski, B Newman, D Hayne, L Henderson, D Mollenhauer, D Nepal, V Tsukruk

(2022), Vol. 14, pp. 4699-4713, ACS Applied Materials and Interfaces, Washington, D.C., C1

Mixed Surface Chemistry on Carbon Fibers to Promote Adhesion in Epoxy and PMMA Polymers

J Randall, D Eyckens, E Sarlin, S Palola, G Andersson, Y Yin, F Stojcevski, L Henderson

(2022), Vol. 61, pp. 1615-1623, Industrial and Engineering Chemistry Research, Washington, D.C., C1

Carbon fiber sizing agents based on renewable terpenes

S Pawar, S Hutchinson, D Eyckens, F Stojcevski, D Hayne, T Gengenbach, J Razal, L Henderson

(2022), Vol. 220, pp. 1-8, Composites Science and Technology, Amsterdam, The Netherlands, C1

Assessing the properties of Poly(dicyclopentadiene) reinforced with discontinuous carbon fibers

D Hayne, M Singleton, B Patterson, Y Athulya Wickramasingha, J Sietins, D Knorr, F Stojcevski, L Henderson

(2022), Vol. 155, pp. 1-10, Composites Part A: Applied Science and Manufacturing, Amsterdam, The Netherlands, C1

Size-Controlled Nanosculpture of Cylindrical Pores across Multilayer Graphene via Photocatalytic Perforation

A Guirguis, L Dumée, D Eyckens, M Stanfield, Y Yin, G Andersson, L Kong, L Henderson

(2022), Vol. 9, pp. 1-15, Advanced Materials Interfaces, Chichester, Eng., C1

Inducing liquid crystallinity in dilute MXene dispersions for facile processing of multifunctional fibers

Ken Usman, Jizhen Zhang, Si Qin, Ya Yao, Peter Lynch, Pablo Mota-Santiago, Minoo Naebe, Luke Henderson, Dylan Hegh, Joselito Razal

(2022), Vol. 10, pp. 4770-4781, Journal of Materials Chemistry A, Cambridge, Eng., C1

Inverse Vulcanisation of canola oil as a route to recyclable chopped carbon fibre composites

F Stojcevski, M Stanfield, D Hayne, M Mann, N Lundquist, J Chalker, L Henderson

(2022), Vol. 32, pp. 1-9, Sustainable Materials and Technologies, Amsterdam, The Netherlands, C1

A comparison of mechanical properties of recycled high-density polyethylene/waste carbon fiber via injection molding and 3D printing

A Borkar, A Hendlmeier, Zan Simon, J Randall, F Stojcevski, L Henderson

(2022), Vol. 43, pp. 2408-2418, Polymer Composites, London, Eng., C1

Tough and Fatigue Resistant Cellulose Nanocrystal Stitched Ti3C2Tx MXene Films

K Usman, C Bacal, J Zhang, S Qin, P Lynch, P Mota-Santiago, M Naebe, L Henderson, D Hegh, J Razal

(2022), Vol. 43, pp. 1-10, Macromolecular Rapid Communications, London, Eng., C1

Examining the Role of Aryldiazonium Salts in Surface Electroinitiated Polymerization

M Stanfield, M Dilger, D Hayne, N Emonson, A Barlow, N Boase, L Gahan, E Krenske, J Pinson, D Eyckens, L Henderson

(2022), Vol. 38, pp. 4979-4995, Langmuir, Washington, D.C., C1

Waste-derived carbon fiber membrane with hierarchical structures for enhanced oil-in-water emulsion separation: Performance and mechanisms

T Ni, Y You, Z Xie, L Kong, B Newman, L Henderson, S Zhao

(2022), Vol. 653, pp. 1-11, Journal of Membrane Science, Amsterdam, The Netherlands, C1

Photocatalytic-triggered nanopores across multilayer graphene for high-permeation membranes

A Guirguis, L Dumée, X Chen, L Kong, H Wang, L Henderson

(2022), Vol. 443, pp. 1-10, Chemical Engineering Journal, Amsterdam, The Netherlands, C1

Carbon fiber polypropylene interphase modification as a route to improved toughness

J Randall, F Stojcevski, N Djordjevic, A Hendlmeier, B Dharmasiri, M Stanfield, D Knorr, N Tran, R Varley, L Henderson

(2022), Vol. 159, pp. 1-11, Composites Part A: Applied Science and Manufacturing, Amsterdam, The Netherlands, C1

Reinterpreting the Fate of Iridium(III) Photocatalysts-Screening a Combinatorial Library to Explore Light-Driven Side-Reactions

J Bawden, P Francis, S DiLuzio, D Hayne, E Doeven, J Truong, R Alexander, L Henderson, D Gómez, M Massi, B Armstrong, F Draper, S Bernhard, T Connell

(2022), Vol. 144, pp. 11189-11202, Journal of the American Chemical Society, United States, C1

Multifunctional polymeric surface coatings of carbon fibre electrodes for enhanced energy storage performance

B Dharmasiri, M Stanfield, J Randall, K Aldren S. Usman, S Alex Qin, J Razal, E Doeven, P Francis, D Eyckens, Y Yin, G Andersson, L Henderson

(2022), Vol. 447, pp. 1-15, Chemical Engineering Journal, Amsterdam, The Netherlands, C1

Tension-induced toughening and conductivity enhancement in sequentially bridged MXene fibers

K Usman, J Zhang, C Bacal, S Qin, P Mota-Santiago, P Lynch, M Naebe, L Henderson, D Hegh, J Razal

(2022), Vol. 9, pp. 1-11, 2D Materials, Bristol, Eng., C1

A review of milled carbon fibres in composite materials

B Newman, C Creighton, L Henderson, F Stojcevski

(2022), Vol. 163, pp. 1-19, Composites Part A: Applied Science and Manufacturing, Amsterdam, The Netherlands, C1

Enhancing Thermal Conductivity of Polyvinylidene Fluoride Composites by Carbon Fiber: Length Effect of the Filler

G Yi, J Li, L Henderson, W Lei, L Du, S Zhao

(2022), Vol. 14, Polymers, Switzerland, C1

Using in situ polymerisation to enhance adhesion of dissimilar materials

F Stojcevski, O Siddique, G Meric, J Randall, N Emonson, L Henderson

(2021), Vol. 104, International Journal of Adhesion and Adhesives, C1

Covalent sizing surface modification as a route to improved interfacial adhesion in carbon fibre-epoxy composites

D Eyckens, C Arnold, Ž Simon, T Gengenbach, J Pinson, Y Wickramasingha, L Henderson

(2021), Vol. 140, Composites Part A: Applied Science and Manufacturing, C1

Using redox active molecules to build multilayered architecture on carbon fibers and the effect on adhesion in epoxy composites

M Stanfield, D Eyckens, J Médard, P Decorse, J Pinson, L Henderson

(2021), Vol. 202, Composites Science and Technology, C1

Amplification-free electrochemiluminescence molecular beacon-based microRNA sensing using a mobile phone for detection

E Kerr, R Farr, E Doeven, Y Nai, R Alexander, R Guijt, B Prieto-Simon, P Francis, M Dearnley, D Hayne, L Henderson, N Voelcker

(2021), Vol. 330, Sensors and Actuators, B: Chemical, C1

Sequentially Bridged Ti3C2Tx MXene Sheets for High Performance Applications

K Usman, J Zhang, D Hegh, A Rashed, D Jiang, P Lynch, P Mota-Santiago, K Jarvis, S Qin, E Prime, M Naebe, L Henderson, J Razal

(2021), Vol. 8, Advanced Materials Interfaces, C1

Insulating Composites Made from Sulfur, Canola Oil, and Wool**

I Bu Najmah, N Lundquist, M Stanfield, F Stojcevski, J Campbell, L Esdaile, C Gibson, D Lewis, L Henderson, T Hasell, J Chalker

(2021), Vol. 14, pp. 2352-2359, ChemSusChem, Weinheim, Germany, C1

Improving the effects of plasma polymerization on carbon fiber using a surface modification pretreatment

D Eyckens, K Jarvis, A Barlow, Y Yin, L Soulsby, Y Athulya Wickramasingha, F Stojcevski, G Andersson, P Francis, L Henderson

(2021), Vol. 143, Composites Part A: Applied Science and Manufacturing, C1

Surface modification of carbon fibres using ring-opening metathesis polymerization

D Hayne, F Stojcevski, D Knorr, N Tran, L Henderson

(2021), Vol. 145, Composites Part A: Applied Science and Manufacturing, C1

Carbonisation of a polymer made from sulfur and canola oil

M Mann, X Luo, A Tikoalu, C Gibson, Y Yin, R Al-Attabi, G Andersson, C Raston, L Henderson, A Pring, T Hasell, J Chalker

(2021), Vol. 57, pp. 6296-6299, Chemical Communications, London, Eng., C1

α-Aminophosphonate Derivatives for Enhanced Flame Retardant Properties in Epoxy Resin

M Stanfield, J Carrascal, L Henderson, D Eyckens

(2021), Vol. 14, Materials, Switzerland, C1

A comparison of compression molded and additively manufactured short carbon fiber reinforced polyamide-6 samples and the effect of different infill printing patterns

A Hendlmeier, Ž Simon, Y Wickramasingha, L Henderson

(2021), Vol. 42, pp. 4728-4735, Polymer Composites, C1

Investigating interfacial adhesion and open-hole compressive (OHC) strength correlations for CFRPs via variations in sizing and oxidative surface treatment

F Stojcevski, D Hayne, T Hilditch, L Henderson

(2021), Vol. 150, Composites Part A: Applied Science and Manufacturing, C1

Ti3C2TxMXene: From dispersions to multifunctional architectures for diverse applications

K Usman, S Qin, L Henderson, J Zhang, D Hegh, J Razal

(2021), Vol. 8, pp. 2886-2912, Materials Horizons, England, C1

Carbon fibre surface chemistry and its role in fibre-to-matrix adhesion

D Eyckens, F Stojcevski, A Hendlmeier, J Randall, D Hayne, M Stanfield, B Newman, F Vukovic, T Walsh, L Henderson

(2021), Vol. 9, pp. 26528-26572, Journal of Materials Chemistry A, Cambridge, Eng., C1

Catalyst luminescence exploited as an inherent in situ probe of photoredox catalysis

David Hayne, Sudip Mohapatra, Joseph Bawden, Jacqui Adcock, Gregory Barbante, Egan Doeven, Catherine Fraser, Timothy Connell, Jonathan White, Luke Henderson, Paul Francis

(2020), Vol. 4, pp. 105-109, Chemphotochem, Chichester, Eng., C1

Co-reactant and Annihilation Electrogenerated Chemiluminescence of [Ir(df-ppy)2(ptb)]⁺ Derivatives

L Soulsby, J Agugiaro, D Wilson, D Hayne, E Doeven, L Chen, T Pham, T Connell, A Driscoll, L Henderson, P Francis

(2020), Vol. 7, pp. 1889-1896, ChemElectroChem, C1

Using in situ polymerization to increase puncture resistance and induce reversible formability in silk membranes

N Emonson, D Eyckens, B Allardyce, A Hendlmeier, M Stanfield, L Soulsby, F Stojcevski, L Henderson

(2020), Vol. 13, Materials, Switzerland, C1

Reactive compression molding post-inverse vulcanization: a method to assemble, recycle, and repurpose sulfur polymers and composites

N Lundquist, A Tikoalu, M Worthington, R Shapter, S Tonkin, F Stojcevski, M Mann, C Gibson, J Gascooke, A Karton, L Henderson, L Esdaile, J Chalker

(2020), Vol. 26, pp. 10035-10044, Chemistry - A European Journal, Chichester, Eng, C1

Using molecular entanglement as a strategy to enhance carbon fiber-epoxy composite interfaces

D Eyckens, B Demir, J Randall, T Gengenbach, L Servinis, T Walsh, L Henderson

(2020), Vol. 196, Composites Science and Technology, C1

α-Aminophosphonates as Potential PARP1 Inhibitors

S Schweiker, A Tauber, C Kam, D Eyckens, L Henderson, S Levonis

(2020), Vol. 5, pp. 4205-4209, ChemistrySelect, C1

Expanding the scope of surface grafted polymers using electroinitiated polymerization

J Randall, M Stanfield, D Eyckens, J Pinson, L Henderson

(2020), Vol. 36, pp. 7217-7226, Langmuir, Washington, D.C., C1

Cathodic electrogenerated chemiluminescence of tris(2,2′-bipyridine)ruthenium(ii) and peroxydisulfate at pure Ti3C2T: X MXene electrodes

J Zhang, E Kerr, K Usman, E Doeven, P Francis, L Henderson, J Razal

(2020), Vol. 56, pp. 10022-10025, Chemical Communications, England, C1

Examining interfacial interactions in a range of polymers using poly(ethylene oxide) functionalized carbon fibers

D Eyckens, J Randall, F Stojcevski, E Sarlin, S Palola, M Kakkonen, C Scheffler, L Henderson

(2020), Vol. 138, Composites Part A: Applied Science and Manufacturing, C1

Rapid Cross-Linking of Epoxy Thermosets Induced by Solvate Ionic Liquids

Nishar Hameed, Daniel Eyckens, Benjamin Long, Nisa Salim, Jaworski Capricho, Linden Servinis, Mandy De Souza, Magenta Perus, Russell Varley, Luke Henderson

(2020), Vol. 2, pp. 2651-2657, ACS Applied Polymer Materials, Washington, D.C., C1

Generating short carbon fiber polyamide-6 composites from continuous carbon fiber - A preliminary examination of surface treatment and sizing effects

A Hendlmeier, Ž Simon, A Chutani, L Henderson

(2020), Vol. 138, Composites Part A: Applied Science and Manufacturing, C1

The effect of sizing and surface oxidation on the surface properties and tensile behaviour of recycled carbon fibre: An end-of-life perspective

D He, V Soo, F Stojcevski, W Lipiński, L Henderson, P Compston, M Doolan

(2020), Vol. 138, pp. 1-10, Composites Part A: Applied Science and Manufacturing, Amsterdam, The Netherlands, C1

Water-Soluble Iridium(III) Complexes Containing Tetraethylene-Glycol-Derivatized Bipyridine Ligands for Electrogenerated Chemiluminescence Detection

B Newman, L Chen, L Henderson, E Doeven, P Francis, D Hayne

(2020), Vol. 8, Frontiers in Chemistry, Switzerland, C1

Phosphorus-based α-amino acid mimetic for enhanced flame-retardant properties in an epoxy resin

M Stanfield, F Stojcevski, A Hendlmeier, R Varley, J Carrascal, A Osorio, D Eyckens, L Henderson

(2019), Vol. 72, pp. 226-232, Australian Journal of Chemistry, C1

A comparison of interfacial testing methods and sensitivities to carbon fiber surface treatment conditions

F Stojcevski, T Hilditch, L Henderson

(2019), Vol. 118, pp. 293-301, Composites Part A: Applied Science and Manufacturing, Amsterdam, The Netherlands, C1

Designing carbon fiber composite interfaces using a 'graft-to' approach: Surface grafting density versus interphase penetration

J Randall, D Eyckens, L Servinis, F Stojcevski, L O'Dell, T Gengenbach, B Demir, T Walsh, L Henderson

(2019), Vol. 146, pp. 88-96, Carbon, Amsterdam, The Netherlands, C1

Time dependent structure and property evolution in fibres during continuous carbon fibre manufacturing

S Nunna, M Maghe, R Rana, R Varley, D Knorr, J Sands, C Creighton, L Henderson, M Naebe

(2019), Vol. 12, Materials, Switzerland, C1

Simultaneously increasing the hydrophobicity and interfacial adhesion of carbon fibres: a simple pathway to install passive functionality into composites

Chantelle Arnold, Daniel Eyckens, Linden Servinis, Mark Nave, Huaying Yin, Ross Marceau, Jean Pinson, Baris Demir, Tiffany Walsh, Luke Henderson

(2019), Vol. 7, pp. 13483-13494, Journal of materials chemistry a, Cambridge, Eng., C1

A review of solvate ionic liquids: Physical parameters and synthetic applications

D Eyckens, L Henderson

(2019), Vol. 7, Frontiers in Chemistry, Switzerland, C1

Improved out-of-plane strength and weight reduction using hybrid interface composites

F Stojcevski, D Eyckens, J Randall, L Marinovic, G Méric, L Henderson

(2019), Vol. 182, Composites Science and Technology, C1

Colour tuning and enhancement of gel-based electrochemiluminescence devices utilising Ru(ii) and Ir(iii) complexes

L Soulsby, E Doeven, T Pham, D Eyckens, L Henderson, B Long, R Guijt, P Francis

(2019), Vol. 55, pp. 11474-11477, Chemical Communications, England, C1

Sizing effects on the interfacial shear strength of a carbon fibre reinforced two-component thermoplastic polymer

A Hendlmeier, L Marinovic, S Al-Assafi, F Stojcevski, L Henderson

(2019), Vol. 127, Composites Part A: Applied Science and Manufacturing, C1

Perforation routes towards practical nano-porous graphene and analogous materials engineering

A Guirguis, J Maina, L Kong, L Henderson, A Rana, L Li, M Majumder, L Dumee

(2019), Vol. 155, pp. 660-673, Carbon, Oxford, Eng., C1

A conceptual framework for the development of iridium(iii) complex-based electrogenerated chemiluminescence labels

L Chen, D Hayne, E Doeven, J Agugiaro, D Wilson, L Henderson, T Connell, Y Nai, R Alexander, S Carrara, C Hogan, P Donnelly, P Francis

(2019), Vol. 10, pp. 8654-8667, Chemical science, Cambridge, Eng., C1

Examining conductivity, current density, and sizings applied to carbon fibers during manufacture and their effect on fiber-to-matrix adhesion in epoxy polymers

A Hendlmeier, F Stojcevski, R Alexander, S Gupta, L Henderson

(2019), Vol. 179, Composites Part B: Engineering, C1

Fiber with Butterfly Wings: Creating Colored Carbon Fibers with Increased Strength, Adhesion, and Reversible Malleability

D Eyckens, C Arnold, J Randall, F Stojcevski, A Hendlmeier, M Stanfield, J Pinson, T Gengenbach, R Alexander, L Soulsby, P Francis, L Henderson

(2019), Vol. 11, pp. 41617-41625, ACS Applied Materials and Interfaces, Washington, D.C., C1

Increasing the resistivity and IFSS of unsized carbon fibre by covalent surface modification

K Beggs, J Randall, L Servinis, A Krajewski, R Denning, L Henderson

(2018), Vol. 129, pp. 123-128, Reactive and functional polymers, Amsterdam, The Netherlands, C1

Soy flour as an alternative to purified lipoxygenase for the enzymatic synthesis of resolvin analogues

H Tu, E Dobson, L Henderson, C Barrow, J Adcock

(2018), Vol. 41, pp. 25-33, New Biotechnology, Netherlands, C1

A modern account of Iosipescu testing

F Stojcevski, T Hilditch, L Henderson

(2018), Vol. 107, pp. 545-554, Composites part A: applied science and manufacturing, Amsterdam, The Netherlands, C1

Enhancing interfacial shear strength via surface grafting of carbon fibers using the Kolbe decarboxylation reaction

C Arnold, K Beggs, D Eyckens, F Stojcevski, L Servinis, L Henderson

(2018), Vol. 159, pp. 135-141, Composites science and technology, Amsterdam, The Netherlands, C1

A predictive model of interfacial interactions between functionalised carbon fibre surfaces cross-linked with epoxy resin

B Demir, K Beggs, B Fox, L Servinis, L Henderson, T Walsh

(2018), Vol. 159, pp. 127-134, Composites science and technology, Amsterdam, The Netherlands, C1

Synergistic interfacial effects of ionic liquids as sizing agents and surface modified carbon fibers

D Eyckens, L Servinis, C Scheffler, E Wölfel, B Demir, T Walsh, L Henderson

(2018), Vol. 6, pp. 4504-4514, Journal of Materials Chemistry A, C1

Comparison of solvate ionic liquids and DMSO as an in vivo delivery and storage media for small molecular therapeutics

P Yoganantharajah, A Ray, D Eyckens, L Henderson, Y Gibert

(2018), Vol. 18, BMC Biotechnology, England, C1

An efficient high-throughput grafting procedure for enhancing carbon fiber-to-matrix interactions in composites

D Eyckens, F Stojcevski, A Hendlmeier, C Arnold, J Randall, M Perus, L Servinis, T Gengenbach, B Demir, T Walsh, L Henderson

(2018), Vol. 353, pp. 373-380, Chemical engineering journal, Amsterdam, The Netherlands, C1

Using variable interfacial adhesion characteristics within a composite to improve flexural strength and decrease fiber volume

F Stojcevski, J Randall, L Henderson

(2018), Vol. 165, pp. 250-258, Composites science and technology, Amsterdam, The Netherlands, C1

Effect of carbon fiber oxidization parameters and sizing deposition levels on the fiber-matrix interfacial shear strength

F Stojcevski, T Hilditch, T Gengenbach, L Henderson

(2018), Vol. 114, pp. 212-224, Composites part A: applied science and manufacturing, Amsterdam, The Netherlands, C1

Effect of tow size and interface interaction on interfacial shear strength determined by Iosipescu (V-notch) testing in epoxy resin

F Stojceveski, A Hendlmeier, J Randall, C Arnold, M Stanfield, D Eyckens, R Alexander, L Henderson

(2018), Vol. 11, Materials, Switzerland, C1

Electrolytic surface treatment for improved adhesion between carbon fibre and polycarbonate

J Kamps, L Henderson, C Scheffler, R van der Heijden, F Simon, T Bonizzi, N Verghese

(2018), Vol. 11, Materials, Switzerland, C1

Facile and versatile solid state surface modification of silk fibroin membranes using click chemistry

L Raynal, B Allardyce, X Wang, R Dilley, R Rajkhowa, L Henderson

(2018), Vol. 6, pp. 8037-8042, Journal of Materials Chemistry B, England, C1

Radial structure and property relationship in the thermal stabilization of PAN precursor fibres

S Nunna, C Creighton, N Hameed, M Naebe, L Henderson, M Setty, B Fox

(2017), Vol. 59, pp. 203-211, Polymer Testing, C1

Design rules for enhanced interfacial shear response in functionalized carbon fiber epoxy composites

B Demir, L Henderson, T Walsh

(2017), Vol. 9, pp. 11846-11857, ACS applied materials and interfaces, Washington, United States, C1

Electrochemical surface modification of carbon fibres by grafting of amine, carboxylic and lipophilic amide groups

L Servinis, K Beggs, C Scheffler, E Wolfel, J Randall, T Gengenbach, B Demir, T Walsh, E Doeven, P Francis, L Henderson

(2017), Vol. 118, pp. 393-403, Carbon, C1

Tailoring the fibre-to-matrix interface using click chemistry on carbon fibre surfaces

L Servinis, K Beggs, T Gengenbach, E Doeven, P Francis, B Fox, J Pringle, C Pozo-Gonzalo, T Walsh, L Henderson

(2017), Vol. 5, pp. 11204-11213, Journal of materials chemistry A, Cambridge, Eng., C1

Synthesis of α-aminophosphonates using solvate ionic liquids

D Eyckens, L Henderson

(2017), Vol. 7, pp. 27900-27904, RSC Advances, C1

A comparison of novel organoiridium(III) complexes and their ligands as a potential treatment for prostate cancer

S Hockey, G Barbante, P Francis, J Altimari, P Yoganantharajah, Y Gibert, L Henderson

(2016), Vol. 109, pp. 305-313, European Journal of Medicinal Chemistry, France, C1

Influence of base on nitro-aldol (Henry) reaction products for alternative clandestine pathways

L Andrighetto, L Henderson, J Pearson, P Stevenson, X Conlan

(2016), Vol. 48, pp. 684-693, Australian journal of forensic sciences, Abingdon, Eng., C1

Solvate ionic liquids as reaction media for electrocyclic transformations

D Eyckens, M Champion, B Fox, P Yoganantharajah, Y Gibert, T Welton, L Henderson

(2016), Vol. 2016, pp. 913-917, European journal of organic chemistry, London, Eng., C1

Ion-tagged prolinamide organocatalysts for the direct aldol reaction on-water

D Eyckens, H Brozinski, J Delaney, L Servinis, S Naghashian, L Henderson

(2016), Vol. 146, pp. 212-219, Catalysis letters, Berlin, Germany, C1

Determination of Kamlet-Taft parameters for selected solvate ionic liquids

D Eyckens, B Demir, T Walsh, T Welton, L Henderson

(2016), Vol. 18, pp. 13153-13157, Physical Chemistry Chemical Physics, England, C1

Rapid surface functionalization of carbon fibres using microwave irradiation in an ionic liquid

K Beggs, M Perus, L Servinis, L O'Dell, B Fox, T Gengenbach, L Henderson

(2016), Vol. 6, pp. 32480-32483, RSC Advances, C1

In-silico optimisation of two-dimensional high performance liquid chromatography for the determination of Australian methamphetamine seizure samples

L Andrighetto, N Burns, P Stevenson, J Pearson, L Henderson, C Bowen, X Conlan

(2016), Vol. 266, pp. 511-516, Forensic Science International, Ireland, C1

A study on acute toxicity and solvent capacity of solvate ionic liquids: in vivo using a zebrafish model (Danio rerio)

P Yoganantharajah, D Eyckens, J Pedrina, L Henderson, Y Gibert

(2016), Vol. 40, pp. 6599-6603, New journal of chemistry, Cambridge, Eng., C1

Using ionic liquids to reduce energy consumption for carbon fibre production

M Maghe, C Creighton, L Henderson, M Huson, S Nunna, S Atkiss, N Byrne, B Fox

(2016), Vol. 4, pp. 16619-16626, Journal of materials chemistry A, Cambridge, Eng., C1

A novel approach to the functionalisation of pristine carbon fibre using azomethine 1,3-dipolar cycloaddition

L Servinis, T Gengenbach, M Huson, L Henderson, B Fox

(2015), Vol. 68, pp. 335-344, Australian journal of chemistry, Melbourne, Vic., C1

A novel approach to functionalise pristine unsized carbon fibre using in situ generated diazonium species to enhance interfacial shear strength

L Servinis, L Henderson, L Andrighetto, M Huson, T Gengenbach, B Fox

(2015), Vol. 3, pp. 3360-3371, Journal of Materials Chemistry A, C1

Novel 1,4-substituted-1,2,3-triazoles as antitubercular agents.

J Altimari, S Hockey, H Boshoff, A Sajid, L Henderson

(2015), Vol. 10, pp. 787-791, ChemMedChem, Germany, C1

Photoredox catalysis of intramolecular cyclizations with a reusable silica-bound ruthenium complex

G Barbante, T Ashton, E Doeven, F Pfeffer, D Wilson, L Henderson, P Francis

(2015), Vol. 7, pp. 1655-1658, ChemCatChem, London, Eng., C1

A systematic study of carbon fibre surface grafting via in situ diazonium generation for improved interfacial shear strength in epoxy matrix composites

K Beggs, L Servinis, T Gengenbach, M Huson, B Fox, L Henderson

(2015), Vol. 118, pp. 31-38, Composites science and technology, Amsterdam, The Netherlands, C1

Rhodium(II) Azavinyl Carbenes and their Recent Application to Organic Synthesis

S Hockey, L Henderson

(2015), Vol. 68, pp. 1796-1800, Australian journal of chemistry, Melbourne, Vic., C1

Brønsted acid-mediated radical processes in organic synthesis

T Nicholls, L Henderson, A Bissember

(2015), Vol. 68, pp. 1791-1795, Australian journal of chemistry, Melbourne, Vic., C1

Chemiluminescence detection with water-soluble iridium(III) complexes containing a sulfonate-functionalised ancillary ligand

J Truong, K Spilstead, G Barbante, E Doeven, D Wilson, N Barnett, L Henderson, J Altimari, S Hockey, M Zhou, P Francis

(2014), Vol. 139, pp. 6028-6035, Analyst, England, C1

Synthesis and preliminary investigations into novel 1,2,3-triazole-derived androgen receptor antagonists inspired by bicalutamide.

J Altimari, B Niranjan, G Risbridger, S Schweiker, A Lohning, L Henderson

(2014), Vol. 24, pp. 4948-4953, Bioorganic & Medicinal Chemistry Letters, Doetinchem, Netherlands, C1

Preliminary investigations into triazole derived androgen receptor antagonists

J Altimari, B Niranjan, G Risbridger, S Schweiker, A Lohning, L Henderson

(2014), Vol. 22, pp. 2692-2706, Bioorganic and Medicinal Chemistry, England, C1

General approach for electrochemical functionalization of glassy carbon surface by in situ generation of diazonium ion under acidic and non-acidic condition with a cascade protocol

H Salehzadeh, D Nematollahi, V Khakyzadeh, B Mokhtari, L Henderson

(2014), Vol. 139, pp. 270-280, Electrochimica Acta, Oxford United Kingdom, C1

DryLab® optimised two-dimensional high performance liquid chromatography for differentiation of ephedrine and pseudoephedrine based methamphetamine samples

L Andrighetto, P Stevenson, J Pearson, L Henderson, X Conlan

(2014), Vol. 244, pp. 302-305, Forensic science international, Shannon, Ireland, C1

Surface functionalization of unsized carbon fiber using nitrenes derived from organic azides

L Servinis, L Henderson, T Gengenbach, A Kafi, M Huson, B Fox

(2013), Vol. 54, pp. 378-388, Carbon, Amsterdam, The Netherlands, C1

Protic ionic liquids as recyclable solvents for the acid catalysed synthesis of diphenylmethyl thioethers

L Henderson, M Thornton, N Byrne, B Fox, Kelsey Waugh, J Squire, L Servinis, Joshua Delaney, H Brozinski, L Andrighetto, J Altimari

(2013), Vol. 16, pp. 634-639, Compte Rendus Chimie, Amsterdam, The Netherlands, C1

Synergistic effects within a C2-symmetric organocatalyst : the potential formation of a chiral catalytic pocket

J Delaney, H Brozinski, L Henderson

(2013), Vol. 11, pp. 2951-2960, Organic and biomolecular chemistry, Cambridge, England, C1

Recent advances in the synthesis of diphenylmethyl ethers

M Thornton, L Henderson

(2013), Vol. 45, pp. 395-420, Organic preparations and procedures international, London, England, C1

A snapshot of ionic-liquid-tagged proline-based organocatalysts

H Brozinski, J Delaney, L Henderson

(2013), Vol. 66, pp. 844-847, Australian journal of chemistry, Melbourne, Vic., C1

Temperature-responsive self-assemblies of 'kinked' amphiphiles

J Squire, G Durand, L Waddington, A Sutti, L Henderson

(2013), Vol. 66, pp. 899-909, Australian journal of chemistry, Melbourne, Vic., C1

3-Benzhydryl-1,3,4-thia-diazole-2(3H)-thione

M Thornton, P Healy, L Henderson

(2013), Vol. E69, pp. 1-8, Acta crystallographica. Section E, structure reports online, Chester, Eng., C1-1

Synthesis and comparative physical-chemical characterisation of neutral and cationic amphiphiles using RP-HPLC

J Squire, L Henderson, X Conlan

(2013), Vol. 9, pp. 653-658, Current analytical chemistry, Amsterdam, The Netherlands, C1-1

Synthesis and preliminary investigations into norbornane-based amphiphiles and their self-assembly

J Squire, A Sutti, G Durand, X Conlan, L Henderson

(2013), Vol. 37, pp. 1895-1905, New journal of chemistry, London, Eng., C1-1

Synthesis and evaluation of C8-substituted 4.5-spiro lactams as Glycogen Phosphorylase a inhibitors

W Loughlin, S Schweiker, I Jenkins, L Henderson

(2013), Vol. 69, pp. 1576-1582, Tetrahedron, Amsterdam, The Netherlands, C1-1

Rapid formation of diphenylmethyl ethers and thioethers using microwave irradiation and protic ionic liquids

J Altimari, J Delaney, L Servinis, J Squire, M Thornton, S Khosa, B Long, M Johnstone, C Fleming, F Pfeffer, S Hickey, M Wride, T Ashton, B Fox, N Byrne, L Henderson

(2012), Vol. 53, pp. 2035-2039, Tetrahedron letters, Oxford, England, C1

The determination and characterisation of 2-naphthyloxycarbonyl chloride derivatised biogenic amines in pet foods

D Bassanese, S Crawford-Clark, B Bowen, L Henderson, N Barnett, X Conlan

(2012), Vol. 35, pp. 1110-1117, Journal of separation science, Weinheim, Germany, C1

Methyl 3-[4-(4-nitrobenzyloxy)phenyl]propanoate

L Servinis, B Fox, P Healy, L Henderson

(2012), Vol. E68, pp. 1997-1998, Acta crystallographica. Section E, structure reports online, Chester, England, C1

Accessing highly-halogenated flavanones using protic ionic liquids and microwave irradiation

M Thornton, L Henderson, N Byrne, F Pfeffer

(2012), Vol. 16, pp. 121-126, Current organic chemistry, Bussum, Netherlands, C1

Direct asymmetric aldol reactions in water catalysed by a highly active C2-Symmetrical bisprolinamide organocatalyst

J Delaney, L Henderson

(2012), Vol. 354, pp. 197-204, Advanced synthesis and catalysis, Weinheim, Germany, C1

A comparative assessment of a-lipoic acid N-phenylamides as non-steroidal androgen receptor antagonists both on and off gold nanoparticles

L Henderson, J Altimari, G Dyson, L Servinis, B Niranjan, G Risbridger

(2012), Vol. 40, pp. 1-5, Bioorganic chemistry, Orlando, Fla., C1

Chemiluminescence detection of amino acids and related compounds using acidic potassium permanganate, manganese(IV) or tris(2,2'-bipyridine)ruthenium(III)

J Terry, Z Smith, G McDermott, R Waite, N Barnett, L Henderson, J Altimari, P Francis

(2012), Vol. 99, pp. 1051-1056, Talanta, Amsterdam, The Netherlands, C1

1-[4-Chloro-3-(trifluoromethyl)phenyl]-4-phenyl-1H-1,2,3-triazole

J Altimari, P Healy, L Henderson

(2012), Vol. 68, pp. 1-8, Acta crystallographica. Section E, structure reports online, Chester, Eng., C1-1

Green chemiluminescence from a bis-cyclometalated iridium(III) complex with an ancillary bathophenanthroline disulfonate ligand

E Zammit, N Barnett, L Henderson, G Dyson, M Zhou, P Francis

(2011), Vol. 136, pp. 3069-3072, Analyst, Cambridge, U. K., C1

Rapid and efficient protic ionic liquid-mediated pinacol rearrangements under microwave irradiation

L Henderson, N Byrne

(2011), Vol. 13, pp. 813-816, Green chemistry, Cambridge, United Kingdom, C1

Structure inducing ionic liquids-enhancement of alpha helicity in the Abeta(1-40) peptide from Alzheimer's disease

N Debeljuh, C Barrow, L Henderson, N Byrne

(2011), Vol. 47, pp. 6371-6373, Chemical communications, Cambridge, United Kingdom, C1

Investigating ionic effects applied to water based organocatalysed aldol reactions

J Delaney, L Henderson

(2011), Vol. 12, pp. 9083-9094, International journal of molecular sciences, Basel, Switzerland, C1

Determination of citrus aurantium protoalkaloids using HPLC with acidic potassium permanganate chemiluminescence detection

D Percy, J Adcock, X Conlan, N Barnett, M Gange, L Noonan, L Henderson, P Francis

(2010), Vol. 80, pp. 2191-2195, Talanta, Amsterdam, Netherlands, C1

Rapid synthesis of cyclobutene diesters using a microwave-accelerated ruthenium-catalysed [2+2] cycloaddition

M Johnstone, A Lowe, L Henderson, F Pfeffer

(2010), Vol. 51, pp. 5889-5891, Tetrahedron letters, Oxford, England, C1

Domino Heck-Aza-Michael reactions : efficient access to 1-substituted tetrahydro-β-carbolines

D Priebbenow, L Henderson, F Pfeffer, S Stewart

(2010), Vol. 75, pp. 1787-1790, Journal of organic chemistry, Washington, D.C., C1

Developing an anion host for lipid A binding and antibacterial activity

L Henderson, J Li, R Nation, T Velkov, F Pfeffer

(2010), Vol. 46, pp. 3197-3199, Chemical communications, Cambridge, England, C1

Palladium catalyzed tandem alkenyl- and aryl-C-N bond formation : a cascade N-annulation route to 4-, 5-, 6- and 7-chloroindoles

L Henderson, M Lindon, M Willis

(2010), Vol. 66, pp. 6632-6638, Tetrahedron, Oxford, England, C1-1

Total synthesis of (±)-hyphodermins A and D

W Loughlin, I Jenkins, L Henderson, M Campitelli, P Healy

(2008), Vol. 73, pp. 3435-3440, Journal of organic chemistry, Washington, D.C., C1-1

Evaluation of novel hyphodermin derivatives as glycogen phosphorylase a inhibitors

W Loughlin, G Pierens, M Petersson, L Henderson, P Healy

(2008), Vol. 16, pp. 6172-6178, Bioorganic & medicinal chemistry, Oxford, England, C1-1

Efficient formal synthesis of (±)-hyphodermin B

L Henderson, W Loughlin, I Jenkins, P Healy, M Campitelli

(2006), Vol. 71, pp. 2384-2388, Journal of organic chemistry, Washington, D.C., C1-1

Investigations into the parallel synthesis of novel pyrrole-oxazole analogues of the insecticide pirate

W Loughlin, L Henderson, K Elson, M Murphy

(2006), Vol. 12, pp. 1975-1980, Synthesis: journal of synthetic organic chemistry, Thieme, C1-1

(±)-1-Hydr�oxy-6,6-dimethyl-1H,6H-naphtho[1,2-c]furan-3,9-trione

L Henderson, W Loughlin, I Jenkins, P Healy

(2006), Vol. E62, Acta crystallographica. Section E : structure reports online, Copenhagen, Denmark, C1-1

Synthesis of a novel pyrrole oxazole analogue of the insecticide pirate

W Loughlin, M Murphy, K Elson, L Henderson

(2004), Vol. 57, pp. 227-232, Australian journal of chemistry, Collingwood, Vic., C1-1