Prof Minoo Naebe

Radially aligned hierarchical N-doped porous carbon beads derived from oil-sand asphaltene for long-life water filtration and wastewater treatment

B Nasri-Nasrabadi, B Czech, R Yadav, K Shirvanimoghaddam, A Krzyszczak, V Unnikrishnan, M Naebe

(2023), Vol. 863, Science of the Total Environment, C1

Porous graphene/poly(vinylidene fluoride) nanofibers for pressure sensing

M Abolhasani, S Azimi, M Mousavi, S Anwar, M Hassanpour Amiri, K Shirvanimoghaddam, M Naebe, J Michels, K Asadi

(2022), Vol. 139, pp. 1-10, Journal of Applied Polymer Science, London, Eng., C1

Nano-fluoro dispersion functionalized superhydrophobic degummed & waste silk fabric for sustained recovery of petroleum oils & organic solvents from wastewater

P Gore, M Naebe, X Wang, B Kandasubramanian

(2022), Vol. 426, pp. 1-18, Journal of Hazardous Materials, Amsterdam, The Netherlands, C1

Structural design and mechanism analysis of hierarchical porous carbon fibers for advanced energy and environmental applications

C Liu, Q Li, W Kang, W Lei, X Wang, C Lu, M Naebe

(2022), Vol. 10, pp. 10-49, Journal of Materials Chemistry A, Cambridge, Eng., C1

Enhancement of ionic conduction and mechanical properties for all-solid-state polymer electrolyte systems through ionic and physical bonding

J Choi, O Zabihi, R Varley, B Fox, M Naebe

(2022), Vol. 23, pp. 1-14, Materials Today Chemistry, Amsterdam, The Netherlands, C1

Biobased Carbon Fiber Composites with Enhanced Flame Retardancy: A Cradle-to-Cradle Approach

P Zamani, O Zabihi, M Ahmadi, R Mahmoodi, T Kannangara, P Joseph, M Naebe

(2022), Vol. 10, pp. 1059-1069, ACS Sustainable Chemistry and Engineering, Washington, D.C., C1

Microwave synthesis of biochar for environmental applications

K Shirvanimoghaddam, B Czech, S Abdikheibari, G Brodie, M Kończak, A Krzyszczak, A Al-Othman, M Naebe

(2022), Vol. 161, pp. 1-25, Journal of Analytical and Applied Pyrolysis, Amsterdam, The Netherlands, C1

Facemask Global Challenges: The Case of Effective Synthesis, Utilization, and Environmental Sustainability

K Shirvanimoghaddam, B Czech, R Yadav, C Gokce, L Fusco, L Delogu, A Yilmazer, G Brodie, A Al-Othman, A Al-Tamimi, J Grout, M Naebe

(2022), Vol. 14, pp. 1-29, Sustainability, Basel, Switzerland, C1

Multiple Hydrogen Bond Channel Structural Electrolyte for an Enhanced Carbon Fiber Composite Battery

J Choi, O Zabihi, R Varley, J Zhang, B Fox, M Naebe

(2022), Vol. 5, pp. 2054-2066, ACS Applied Energy Materials, C1

Inducing liquid crystallinity in dilute MXene dispersions for facile processing of multifunctional fibers

Ken Usman, Jizhen Zhang, Si Qin, Ya Yao, Peter Lynch, Pablo Mota-Santiago, Minoo Naebe, Luke Henderson, Dylan Hegh, Joselito Razal

(2022), Vol. 10, pp. 4770-4781, Journal of Materials Chemistry A, Cambridge, Eng., C1

Continuous, pilot-scale production of carbon fiber from a textile grade PAN polymer

H Khan, J Kaur, M Naebe, S Hutchinson, R Varley

(2022), Vol. 31, pp. 1-12, Materials Today Communications, Amsterdam, The Netherlands, C1

Covalent treatment of carbon fibre with functionalized MoS2 nanosheets using thiol-ene click chemistry: The improvement of interface in multiscale epoxy composites

M Ahmadi, O Zabihi, R Yadav, M Ghandehari Ferdowsi, M Naebe

(2022), Vol. 236, pp. 1-14, Composites Part B: Engineering, Amsterdam, The Netherlands, C1

Tough and Fatigue Resistant Cellulose Nanocrystal Stitched Ti3C2Tx MXene Films

K Usman, C Bacal, J Zhang, S Qin, P Lynch, P Mota-Santiago, M Naebe, L Henderson, D Hegh, J Razal

(2022), Vol. 43, pp. 1-10, Macromolecular Rapid Communications, London, Eng., C1

In-situ fabrication of multifunctional N-doped hybrid carbon nanotube@carbon fiber by recycling gaseous effluents of carbon fiber production

C Liu, L Miao, R Zhao, F Yang, V Unnikrishnan, R Rana, N Deng, M Ghandehari Ferdowsi, Q Chao, W Kang, J Razal, L Miao, M Naebe, Q Li

(2022), Vol. 193, pp. 368-380, Carbon, C1

Multifunctional PA6 composites using waste glass fiber and green metal organic framework/graphene hybrids

V Unnikrishnan, O Zabihi, Q Li, M Ahmadi, M Ferdowsi, T Kannangara, P Blanchard, A Kiziltas, P Joseph, M Naebe

(2022), Vol. 43, pp. 5877-5893, Polymer Composites, C1

Tension-induced toughening and conductivity enhancement in sequentially bridged MXene fibers

K Usman, J Zhang, C Bacal, S Qin, P Mota-Santiago, P Lynch, M Naebe, L Henderson, D Hegh, J Razal

(2022), Vol. 9, 2D Materials, C1

High Performance Carbon Fiber Structural Batteries Using Cellulose Nanocrystal Reinforced Polymer Electrolyte

J Choi, O Zabihi, R Varley, B Fox, M Naebe

(2022), Vol. 14, pp. 45320-45332, ACS Applied Materials and Interfaces, C1

Nacre-bionic nanocomposite membrane for efficient in-plane dissipation heat harvest under high temperature

J Wang, D Liu, Q Li, C Chen, Z Chen, M Naebe, P Song, D Portehault, C Garvey, D Golberg, W Lei

(2021), Vol. 7, pp. 219-225, Journal of materiomics, Amsterdam, The Netherlands, C1

Pore-assisted lithium deposition in hierarchically porous and hollow carbon textile for highly stable lithium anode

Z Wang, Q Li, S Qin, D Liu, P Zhang, D Hegh, J Zhang, M Naebe, W Lei, J Razal

(2021), Vol. 489, Journal of Power Sources, C1

Sequentially Bridged Ti3C2Tx MXene Sheets for High Performance Applications

K Usman, J Zhang, D Hegh, A Rashed, D Jiang, P Lynch, P Mota-Santiago, K Jarvis, S Qin, E Prime, M Naebe, L Henderson, J Razal

(2021), Vol. 8, Advanced Materials Interfaces, C1

Metal-organic framework structure-property relationships for high-performance multifunctional polymer nanocomposite applications

V Unnikrishnan, O Zabihi, M Ahmadi, Q Li, P Blanchard, A Kiziltas, M Naebe

(2021), Vol. 9, pp. 4348-4378, Journal of Materials Chemistry A, London, Eng., C1

The reinforcing role of 2D graphene analogue MoS₂ nanosheets in multiscale carbon fibre composites: Improvement of interfacial adhesion

M Ahmadi, O Zabihi, R Yadav, M Ghandehari Ferdowsi, M Naebe

(2021), Vol. 207, pp. 1-12, Composites Science and Technology, Amsterdam, The Netherlands, C1

Growth of diamond coating on carbon fiber: Relationship between fiber microstructure and stability in hydrogen plasma

J Orwa, J Reiner, A Juma, A Stacey, K Sears, J Schütz, A Merenda, L Hyde, R Guijt, V Adineh, Q Li, M Naebe, A Kouzani, L Dumée

(2021), Vol. 115, Diamond and Related Materials, C1

Improving energy efficiency of carbon fiber manufacturing through waste heat recovery: A circular economy approach with machine learning

H Khayyam, M Naebe, A Milani, S Fakhrhoseini, A Date, B Shabani, S Atkiss, S Ramakrishna, B Fox, R Jazar

(2021), Vol. 225, Energy, C1

Fight against COVID-19: The case of antiviral surfaces

K Shirvanimoghaddam, M Akbari, R Yadav, A Al-Tamimi, M Naebe

(2021), Vol. 9, APL Materials, United States, C1

Novel Phosphorous-Based Deep Eutectic Solvents for the Production of Recyclable Macadamia Nutshell-Polymer Biocomposites with Improved Mechanical and Fire Safety Performances

O Zabihi, M Ahmadi, R Yadav, R Mahmoodi, E Naderi Kalali, S Nikafshar, M Ghandehari Ferdowsi, D Wang, M Naebe

(2021), Vol. 9, pp. 4463-4476, ACS Sustainable Chemistry and Engineering, C1

Balancing the toughness and strength in polypropylene composites

K Shirvanimoghaddam, K Balaji, R Yadav, O Zabihi, M Ahmadi, P Adetunji, M Naebe

(2021), Vol. 223, Composites Part B: Engineering, C1

Sustainable synthesis of rose flower-like magnetic biochar from tea waste for environmental applications

K Shirvanimoghaddam, B Czech, K Tyszczuk-Rotko, M Kończak, S Fakhrhoseini, R Yadav, M Naebe

(2021), Vol. 34, pp. 13-27, Journal of Advanced Research, Amsterdam, The Netherlands, C1

Organophosphorus-Functionalized Zirconium-Based Metal-Organic Framework Nanostructures for Improved Mechanical and Flame Retardant Polymer Nanocomposites

V Unnikrishnan, O Zabihi, Q Li, M Ahmadi, R Yadav, E Kalali, K Tanwar, A Kiziltas, P Blanchard, D Wang, M Naebe

(2021), Vol. 4, pp. 13027-13040, ACS Applied Nano Materials, Washington, D.C., C1

Polymer composite for antistatic application in aerospace

R Yadav, M Tirumali, X Wang, M Naebe, B Kandasubramanian

(2020), Vol. 16, pp. 107-118, Defence Technology, C1

PAN precursor fabrication, applications and thermal stabilization process in carbon fiber production: Experimental and mathematical modelling

H Khayyam, R Jazar, S Nunna, G Golkarnarenji, K Badii, S Fakhrhoseini, S Kumar, M Naebe

(2020), Vol. 107, Progress in Materials Science, C1

A sustainable approach to scalable production of a graphene based flame retardant using waste fish deoxyribonucleic acid

O Zabihi, M Ahmadi, Q Li, M Ferdowsi, R Mahmoodi, E Kalali, D Wang, M Naebe

(2020), Vol. 247, Journal of Cleaner Production, C1

2D transition metal dichalcogenide nanomaterials: advances, opportunities, and challenges in multi-functional polymer nanocomposites

M Ahmadi, O Zabihi, S Jeon, M Yoonessi, A Dasari, S Ramakrishna, M Naebe

(2020), Vol. 8, pp. 845-883, Journal of materials chemistry A, Cambridge, Eng., C1

Structure-rate performance relationship in Si nanoparticles-carbon nanofiber composite as flexible anode for lithium-ion batteries

V Ghanooni Ahmadabadi, K Shirvanimoghaddam, R Kerr, N Showkath, M Naebe

(2020), Vol. 330, Electrochimica Acta, C1

Silk fibres exhibiting biodegradability & superhydrophobicity for recovery of petroleum oils from oily wastewater

P Gore, M Naebe, X Wang, B Kandasubramanian

(2020), Vol. 389, Journal of Hazardous Materials, Netherlands, C1

Development of a low cost and green microwave assisted approach towards the circular carbon fibre composites

O Zabihi, M Ahmadi, C Liu, R Mahmoodi, Q Li, M Naebe

(2020), Vol. 184, Composites Part B: Engineering, C1

Death by waste: Fashion and textile circular economy case

K Shirvanimoghaddam, B Motamed, S Ramakrishna, M Naebe

(2020), Vol. 718, Science of the Total Environment, Netherlands, C1

A sustainable approach to the low-cost recycling of waste glass fibres composites towards circular economy

O Zabihi, M Ahmadi, C Liu, R Mahmoodi, Q Li, M Ferdowsi, M Naebe

(2020), Vol. 12, Sustainability (Switzerland), C1

Hierarchically Structured Porous Piezoelectric Polymer Nanofibers for Energy Harvesting

M Abolhasani, M Naebe, M Hassanpour Amiri, K Shirvanimoghaddam, S Anwar, J Michels, K Asadi

(2020), Vol. 7, Advanced Science, Germany, C1

A novel hybrid machine learning algorithm for limited and big data modeling with application in industry 4.0

H Khayyam, A Jamali, A Bab-Hadiashar, T Esch, S Ramakrishna, M Jalili, M Naebe

(2020), Vol. 8, pp. 111381-111393, IEEE access, Piscataway, N.J., C1

Surface treatment of Basalt fiber for use in automotive composites

K Balaji, K Shirvanimoghaddam, G Rajan, A Ellis, M Naebe

(2020), Vol. 17, Materials Today Chemistry, C1

Ultrafast microwave assisted development of magnetic carbon microtube from cotton waste for wastewater treatment

S Fakhrhoseini, B Czech, K Shirvanimoghaddam, M Naebe

(2020), Vol. 606, Colloids and Surfaces A: Physicochemical and Engineering Aspects, C1

Sorption of pharmaceuticals and personal care products (PPCPs) onto a sustainable cotton based adsorbent

B Czech, K Shirvanimoghaddam, E Trojanowska, M naebe

(2020), Vol. 18, Sustainable Chemistry and Pharmacy, C1

Polycarbonate and activated charcoal-engineered electrospun nanofibers for selective recovery of oil/solvent from oily wastewater

P Gore, P Gawali, M Naebe, X Wang, B Kandasubramanian

(2020), Vol. 2, SN Applied Sciences, C1

Super hard carbon microtubes derived from natural cotton for development of high performance titanium composites

K Shirvanimoghaddam, E Ghasali, A Pakseresht, S Derakhshandeh, M Alizadeh, T Ebadzadeh, M Naebe

(2019), Vol. 775, pp. 601-616, Journal of Alloys and Compounds, Amsterdam, The Netherlands, C1

Formation of skin-core in carbon fibre processing: A defect or an effect?

S Nunna, M Setty, M Naebe

(2019), Vol. 13, pp. 146-158, Express Polymer Letters, Budapest, Hungary, C1

Sustainable carbon microtube derived from cotton waste for environmental applications

K Shirvanimoghaddam, B Czech, A Wiącek, W Ćwikła-Bundyra, M Naebe

(2019), Vol. 361, pp. 1605-1616, Chemical engineering journal, Amsterdam, The Netherlands, C1

A machine learning case study with limited data for prediction of carbon fiber mechanical properties

G Golkarnarenji, M Naebe, K Badii, A Milani, R Jazar, H Khayyam

(2019), Vol. 105, pp. 123-132, Computers in industry, Amsterdam, The Netherlands, C1

The light enhanced removal of Bisphenol A from wastewater using cotton waste derived carbon microtubes

K Shirvanimoghaddam, B Czech, G Wójcik, M Naebe

(2019), Vol. 539, pp. 425-432, Journal of Colloid and Interface Science, United States, C1

Time dependent structure and property evolution in fibres during continuous carbon fibre manufacturing

S Nunna, M Maghe, R Rana, R Varley, D Knorr, J Sands, C Creighton, L Henderson, M Naebe

(2019), Vol. 12, Materials, Switzerland, C1

Low-cost carbon fibre derived from sustainable coal tar pitch and polyacrylonitrile: Fabrication and characterisation

O Zabihi, S Shafei, S Fakhrhoseini, M Ahmadi, H Nazarloo, R Stanger, Q Tran, J Lucas, T Wall, M Naebe

(2019), Vol. 12, Materials, Switzerland, C1

Nano-magnetite decorated carbon fibre for enhanced interfacial shear strength

S Fakhrhoseini, Q Li, V Unnikrishnan, M Naebe

(2019), Vol. 148, pp. 361-369, Carbon, Amsterdam, The Netherlands, C1

Progress in silk materials for integrated water treatments: fabrication, modification and applications

P Gore, M Naebe, X Wang, B Kandasubramanian

(2019), Vol. 374, pp. 437-470, Chemical engineering journal, Amsterdam, The Netherlands, C1

Thermodynamic approach to tailor porosity in piezoelectric polymer fibers for application in nanogenerators

M Abolhasani, M Naebe, K Shirvanimoghaddam, H Fashandi, H Khayyam, M Joordens, A Pipertzis, S Anwar, R Berger, G Floudas, J Michels, K Asadi

(2019), Vol. 62, pp. 594-600, Nano energy, Amsterdam, The Netherlands, C1

Lightweight, Superelastic Yet Thermoconductive Boron Nitride Nanocomposite Aerogel for Thermal Energy Regulation

J Wang, D Liu, Q Li, C Chen, Z Chen, P Song, J Hao, Y Li, S Fakhrhoseini, M Naebe, X Wang, W Lei

(2019), Vol. 13, pp. 7860-7870, ACS Nano, United States, C1

Multi-Objective Optimization of Manufacturing Process in Carbon Fiber Industry Using Artificial Intelligence Techniques

G Golkarnarenji, M Naebe, K Badii, A Milani, A Jamali, A Bab-Hadiashar, R Jazar, H Khayyam

(2019), Vol. 7, pp. 67576-67588, IEEE Access, C1

Influence of Different Nanocellulose Additives on Processing and Performance of PAN-Based Carbon Fibers

E Jiang, M Maghe, N Zohdi, N Amiralian, M Naebe, B Laycock, B Fox, D Martin, P Annamalai

(2019), Vol. 4, pp. 9720-9730, ACS Omega, United States, C1

Towards a Green and Self-Powered Internet of Things Using Piezoelectric Energy Harvesting

M Shirvanimoghaddam, K Shirvanimoghaddam, M Abolhasani, M Farhangi, V Zahiri Barsari, H Liu, M Dohler, M Naebe

(2019), Vol. 7, pp. 94533-94556, IEEE Access, C1

Recovery of Mode I self-healing interlaminar fracture toughness of fiber metal laminate by modified double cantilever beam test

L Shanmugam, M Naebe, J Kim, R Varley, J Yang

(2019), Vol. 16, pp. 25-29, Composites Communications, Piscataway, N.J., C1

Simultaneous electrochemical-assisted exfoliation and in situ surface functionalization towards large-scale production of few-layer graphene

O Zabihi, M Ahmadi, Q Li, S Fakhrhoseini, Z Komeily Nia, M Arjmand, K Parvez, M Naebe

(2019), Vol. 18, FlatChem, C1

Controlled Design of a Robust Hierarchically Porous and Hollow Carbon Fiber Textile for High-Performance Freestanding Electrodes

Q Li, J Wang, C Liu, S Fakhrhoseini, D Liu, L Zhang, W Lei, M Naebe

(2019), Vol. 6, Advanced Science, Germany, C1

A hydrothermal-assisted ball milling approach for scalable production of high-quality functionalized MoS2 nanosheets for polymer nanocomposites

M Ahmadi, O Zabihi, Q Li, S Fakhrhoseini, M Naebe

(2019), Vol. 9, Nanomaterials, Switzerland, C1

Development of a cost model for the production of carbon fibres

S Nunna, P Blanchard, D Buckmaster, S Davis, M Naebe

(2019), Vol. 5, Heliyon, England, C1

Natural bauxite nanosheets: A multifunctional and sustainable 2D nano-reinforcement for high performance polymer nanocomposites

O Zabihi, M Ahmadi, M Ghandehari Ferdowsi, Q Li, S Fakhrhoseini, R Mahmoodi, A Ellis, M Naebe

(2019), Vol. 184, Composites Science and Technology, C1

Thermomechanical characteristics of h-BN- and POSS-based bisphenol A polycarbonate nanocomposites

R Yadav, M Naebe, X Wang, B Kandasubramanian

(2019), Vol. 58, pp. 1742-1756, Polymer-Plastics Technology and Materials, London, Eng., C1

A multi-objective Gaussian process approach for optimization and prediction of carbonization process in carbon fiber production under uncertainty

Milad Ramezankhani, Bryn Crawford, Hamid Khayyam, Minoo Naebe, Rudolf Seethaler, Abbas Milani

(2019), Vol. 2, pp. 444-455, Advanced composites and hybrid materials, Berlin, Germany, C1-1

A technical review on epoxy-clay nanocomposites: Structure, properties, and their applications in fiber reinforced composites

O Zabihi, M Ahmadi, S Nikafshar, K Chandrakumar Preyeswary, M Naebe

(2018), Vol. 135, pp. 1-24, Composites Part B: Engineering, C1

Sulfur-embedded porous carbon nanofiber composites for high stability lithium-sulfur batteries

W Kang, L Fan, N Deng, H Zhao, Q Li, M Naebe, J Yan, B Cheng

(2018), Vol. 333, pp. 185-190, Chemical Engineering Journal, C1

Support vector regression modelling and optimization of energy consumption in carbon fiber production line

G Golkarnarenji, M Naebe, K Badii, A Milani, R Jazar, H Khayyam

(2018), Vol. 109, pp. 276-288, Computers and chemical engineering, Amsterdam, The Netherlands, C1

Graphene based room temperature flexible nanocomposites from permanently cross-linked networks

N Hameed, L Dumée, F Allioux, M Reghat, J Church, M Naebe, K Magniez, J Parameswaranpillai, B Fox

(2018), Vol. 8, Scientific Reports, England, C1

Towards predicting the piezoelectricity and physiochemical properties of the electrospun P(VDF-TrFE) nanogenrators using an artificial neural network

M Abolhasani, K Shirvanimoghaddam, H Khayyam, S Moosavi, N Zohdi, M Naebe

(2018), Vol. 66, pp. 178-188, Polymer Testing, London, Eng., C1

Periodical patterning of a fully tailored nanocarbon on CNT for fabrication of thermoplastic composites

K Shirvanimoghaddam, M Abolhasani, B Polisetti, M Naebe

(2018), Vol. 107, pp. 304-314, Composites Part A: Applied Science and Manufacturing, C1

Sustainable periodically patterned carbon nanotube for environmental application: introducing the cheetah skin structure

K Shirvanimoghaddam, B Czech, M Abolhasani, M Naebe

(2018), Vol. 179, pp. 429-440, Journal of cleaner production, Amsterdam, The Netherlands, C1

Production of low cost carbon-fiber through energy optimization of stabilization process

G Golkarnarenji, M Naebe, K Badii, A Milani, R Jazar, H Khayyam

(2018), Vol. 11, Materials, Switzerland, C1

Nano-enhanced interface in carbon fibre polymer composite using halloysite nanotubes

M Jäger, O Zabihi, M Ahmadi, Q Li, A Depalmeanar, M Naebe

(2018), Vol. 109, pp. 115-123, Composites Part A: Applied Science and Manufacturing, C1

Evaluating the Thermal Extrusion Behavior of a Coking Coal for Direct Carbon Fiber Production

R Stanger, Q Tran, M Browne, J Lucas, M Naebe, M Height, T Wall

(2018), Vol. 32, pp. 4528-4537, Energy and Fuels, Perth, AUSTRALIA, C1

Synchrotron X-ray scattering and IR-mapping studies of wet-spun lignin-derived carbon fibre precursor

A Oroumei, P Lynch, M Tobin, M Naebe

(2018), Vol. 163, pp. 151-161, Composites science and technology, Amsterdam, The Netherlands, C1

A pathway to reduce energy consumption in the thermal stabilization process of carbon fiber production

S Nunna, M Maghe, S Fakhrhoseini, B Polisetti, M Naebe

(2018), Vol. 11, Energies, C1

Thermomechanical performance of cheetah skin carbon nanotube embedded composite: isothermal and non-isothermal investigation

K Shirvanimoghaddam, B Polisetti, A Dasari, J Yang, S Ramakrishna, M Naebe

(2018), Vol. 145, pp. 294-309, Polymer, Amsterdam, The Netherlands, C1

Chemically Enhanced Wet-Spinning Process to Accelerate Thermal Stabilization of Polyacrylonitrile Fibers

S Fakhrhoseini, H Khayyam, M Naebe

(2018), Vol. 303, Macromolecular Materials and Engineering, C1

Biomimicking of Hierarchal Molluscan Shell Structure Via Layer by Layer 3D Printing

R Yadav, R Goud, A Dutta, X Wang, M Naebe, B Kandasubramanian

(2018), Vol. 57, pp. 10832-10840, Industrial and Engineering Chemistry Research, C1

High temperature thermally conductive nanocomposite textile by "green" electrospinning

J Wang, Q Li, D Liu, C Chen, Z Chen, J Hao, Y Li, J Zhang, M Naebe, W Lei

(2018), Vol. 10, pp. 16868-16872, Nanoscale, England, C1

On the detection of carbon fibre storage contamination and its effect on the fibre-matrix interface

Q Li, A Woodhead, J Church, M Naebe

(2018), Vol. 8, Scientific Reports, England, C1

A comprehensive chemical model for the preliminary steps of the thermal stabilization process in a carbon fibre manufacturing line

K Badii, G Golkarnarenji, A Milani, M Naebe, H Khayyam

(2018), Vol. 3, pp. 959-971, Reaction Chemistry and Engineering, C1

Electroactive nanostructured scaffold produced by controlled deposition of PPy on electrospun PCL fibres

S Shafei, J Foroughi, L Stevens, C Wong, O Zabihi, M Naebe

(2017), Vol. 43, pp. 1235-1251, Research on Chemical Intermediates, C1

Carbon fiber reinforced metal matrix composites: Fabrication processes and properties

K Shirvanimoghaddam, S Hamim, M Karbalaei Akbari, S Fakhrhoseini, H Khayyam, A Pakseresht, E Ghasali, M Zabet, K Munir, S Jia, J Davim, M Naebe

(2017), Vol. 92, pp. 70-96, Composites Part A: Applied Science and Manufacturing, C1

PVDF/graphene composite nanofibers with enhanced piezoelectric performance for development of robust nanogenerators

M Abolhasani, K Shirvanimoghaddam, M Naebe

(2017), Vol. 138, pp. 49-56, Composites Science and Technology, C1

Evolution of radial heterogeneity in polyacrylonitrile fibres during thermal stabilization: An overview

S Nunna, M Naebe, N Hameed, B Fox, C Creighton

(2017), Vol. 136, pp. 20-30, Polymer Degradation and Stability, C1

Hydrophilic PAN based carbon nanofibres with improved graphitic structure and enhanced mechanical performance using ethylenediamine functionalized graphene

Z Li, O Zabihi, J Wang, Q Li, J Wang, W Lei, M Naebe

(2017), Vol. 7, pp. 2621-2628, RSC Advances, C1

A renewable bio-based epoxy resin with improved mechanical performance that can compete with DGEBA

S Nikafshar, O Zabihi, S Hamidi, Y Moradi, S Barzegar, M Ahmadi, M Naebe

(2017), Vol. 7, pp. 8694-8701, RSC Advances, C1

Development of a predictive model for study of skin-core phenomenon in stabilization process of PAN precursor

G Golkarnarenji, M Naebe, J Church, K Badii, A Bab-Hadiashar, S Atkiss, H Khayyam

(2017), Vol. 49, pp. 46-60, Journal of industrial and engineering chemistry, Amsterdam, The Netherlands, C1

Radial structure and property relationship in the thermal stabilization of PAN precursor fibres

S Nunna, C Creighton, N Hameed, M Naebe, L Henderson, M Setty, B Fox

(2017), Vol. 59, pp. 203-211, Polymer Testing, C1

Cheetah skin structure: A new approach for carbon-nano-patterning of carbon nanotubes

K Shirvanimoghaddam, M Abolhasani, Q Li, H Khayyam, M Naebe

(2017), Vol. 95, pp. 304-314, Composites Part A: Applied Science and Manufacturing, C1

Self-assembly of quaternized chitosan nanoparticles within nanoclay layers for enhancement of interfacial properties in toughened polymer nanocomposites

O Zabihi, M Ahmadi, M Naebe

(2017), Vol. 119, pp. 277-289, Materials and Design, C1

The effects of UV light on the chemical and mechanical properties of a transparent epoxy-diamine system in the presence of an organic UV absorber

S Nikafshar, O Zabihi, M Ahmadi, A Mirmohseni, M Taseidifar, M Naebe

(2017), Vol. 10, Materials, Switzerland, C1

Development of smart poly(vinylidene fluoride)-graft-poly(acrylic acid) tree-like nanofiber membrane for pH-responsive oil/water separation

B Cheng, Z Li, Q Li, J Ju, W Kang, M Naebe

(2017), Vol. 534, pp. 1-8, Journal of membrane science, Amsterdam, The Netherlands, C1

The effect of thermally induced chemical transformations on the structure and properties of carbon fibre precursors

S Nunna, C Creighton, B Fox, M Naebe, M Maghe, M Tobin, K Bambery, J Vongsvivut, N Hameed

(2017), Vol. 5, pp. 7372-7382, Journal of Materials Chemistry A, C1

Collision-induced activation: Towards industrially scalable approach to graphite nanoplatelets functionalization for superior polymer nanocomposites

O Zabihi, M Ahmadi, T Abdollahi, S Nikafshar, M Naebe

(2017), Vol. 7, Scientific Reports, England, C1

Carbon fibre surface modification using functionalized nanoclay: a hierarchical interphase for fibre-reinforced polymer composites

O Zabihi, M Ahmadi, Q Li, S Shafei, M Huson, M Naebe

(2017), Vol. 148, pp. 49-58, Composites science and technology, Kidlington, Eng., C1

Catalyzed synthesis and characterization of a novel lignin-based curing agent for the curing of high-performance epoxy resin

S Nikafshar, O Zabihi, Y Moradi, M Ahmadi, S Amiri, M Naebe

(2017), Vol. 9, Polymers, Switzerland, C1-1

Predictive modelling and optimization of carbon fiber mechanical properties through high temperature furnace

H Khayyam, S Fakhrhoseini, J Church, A Milani, A Bab-Hadiashar, R Jazar, M Naebe

(2017), Vol. 125, pp. 1539-1554, Applied thermal engineering, Amsterdam, The Netherlands, C1

Structural and Thermal Stability of Polycarbonate Decorated Fumed Silica Nanocomposite via Thermomechanical Analysis and In-situ Temperature Assisted SAXS

R Yadav, M Naebe, X Wang, B Kandasubramanian

(2017), Vol. 7, Scientific Reports, England, C1

Nanostructured electrospun hybrid graphene/polyacrylonitrile yarns

F Mehrpouya, J Foroughi, S Naficy, J Razal, M Naebe

(2017), Vol. 7, Nanomaterials, Switzerland, C1-1

Short oxygen plasma treatment leading to long-term hydrophilicity of conductive PCL-PPy nanofiber scaffolds

S Shafei, J Foroughi, Z Chen, C Wong, M Naebe

(2017), Vol. 9, Polymers, Switzerland, C1-1

Mechanical property optimization of wet-spun lignin/polyacrylonitrile carbon fiber precursor by response surface methodology

A Oroumei, M Naebe

(2017), Vol. 18, pp. 2079-2093, Fibers and polymers, Cham, Switzerland, C1-1

Crystalline polymorph transition in poly(vinylidene fluoride) (PVDF)/acrylic rubber(ACM)/clay partially miscible hybrid

M Abolhasani, H Fashandi, M Naebe

(2016), Vol. 73, pp. 65-73, Polymer bulletin, New York, N.Y., C1

Enhanced photocatalytic activities of TiO2-SiO2 nanohybrids immobilized on cement-based materials for dye degradation

H Jafari, S Afshar, O Zabihi, M Naebe

(2016), Vol. 42, pp. 2963-2978, Research on Chemical Intermediates, C1

Effect of B4C, TiB2 and ZrSiO4 ceramic particles on mechanical properties of aluminium matrix composites: Experimental investigation and predictive modelling

K Shirvanimoghaddam, H Khayyam, H Abdizadeh, M Karbalaei Akbari, A Pakseresht, F Abdi, A Abbasi, M Naebe

(2016), Vol. 42, pp. 6206-6220, Ceramics International, C1

Investigation of progress of reactions and evolution of radial heterogeneity in the initial stage of thermal stabilization of PAN precursor fibres

S Nunna, M Naebe, N Hameed, C Creighton, S Naghashian, M Jennings, S Atkiss, M Setty, B Fox

(2016), Vol. 125, pp. 105-114, Polymer degradation and stability, Amsterdam, The Netherlands, C1

Crack damage in polymers and composites: a review

M Naebe, M Abolhasani, H Khayyam, A Amini, B Fox

(2016), Vol. 56, pp. 31-69, Polymer reviews, London, Eng., C1-1

Boron carbide reinforced aluminium matrix composite: Physical, mechanical characterization and mathematical modelling

K Shirvanimoghaddam, H Khayyam, H Abdizadeh, M Karbalaei Akbari, A Pakseresht, E Ghasali, M Naebe

(2016), Vol. 658, pp. 135-149, Materials Science and Engineering A, C1

One-step amino-functionalization of milled carbon fibre for enhancement of thermo-physical properties of epoxy composites

O Zabihi, M Ahmadi, S Shafei, S Seraji, A Oroumei, M Naebe

(2016), Vol. 88, pp. 243-252, Composites part A: applied science and manufacturing, Amsterdam, The Netherlands, C1

Chemical structure based prediction of PAN and oxidized PAN fiber density through a non-linear mathematical model

K Badii, J Church, G Golkarnarenji, M Naebe, H Khayyam

(2016), Vol. 131, pp. 53-61, Polymer degradation and stability, Amsterdam, The Netherlands, C1

A systematic investigation into a novel method for preparing carbon fibre-carbon nanotube hybrid structures

Q Li, J Church, M Naebe, B Fox

(2016), Vol. 90, pp. 174-185, Composites part a: applied science and manufacturing, Amsterdam, The Netherlands, C1

Temperature Assisted in-Situ Small Angle X-ray Scattering Analysis of Ph-POSS/PC Polymer Nanocomposite

R Yadav, M Naebe, X Wang, B Kandasubramanian

(2016), Vol. 6, Scientific Reports, England, C1

Interfacial characterization and reinforcing mechanism of novel carbon nanotube - carbon fibre hybrid composites

Q Li, J Church, M Naebe, B Fox

(2016), Vol. 109, pp. 74-86, Carbon, Amsterdam, The Netherlands, C1

Synergistic effect of MWCNTs functionalization on interfacial and mechanical properties of multi-scale UHMWPE fibre reinforced epoxy composites

M Ahmadi, O Zabihi, M Masoomi, M Naebe

(2016), Vol. 134, pp. 1-11, Composites science and technology, Amsterdam, The Netherlands, C1

A review of recent developments in rechargeable lithium-sulfur batteries

W Kang, N Deng, J Ju, Q Li, D Wu, X Ma, L Li, M Naebe, B Cheng

(2016), Vol. 8, pp. 16541-16588, Nanoscale, England, C1

Morphological changes towards enhancing piezoelectric properties of PVDF electrical generators using cellulose nanocrystals

H Fashandi, M Abolhasani, P Sandoghdar, N Zohdi, Q Li, M Naebe

(2016), Vol. 23, pp. 3625-3637, Cellulose, Dordecht, The Netherlands, C1

Functionally graded materials: A review of fabrication and properties

M Naebe, K Shirvanimoghaddam

(2016), Vol. 5, pp. 223-245, Applied Materials Today, C1

Fish DNA-modified clays: Towards highly flame retardant polymer nanocomposite with improved interfacial and mechanical performance

O Zabihi, M Ahmadi, H Khayyam, M Naebe

(2016), Vol. 6, Scientific Reports, England, C1

Body armour materials: from steel to contemporary biomimetic systems

R Yadav, M Naebe, X Wang, B Kandasubramanian

(2016), Vol. 6, pp. 115145-115174, RSC Advances, C1

Enhanced thermal stability and lifetime of epoxy nanocomposites using covalently functionalized clay: Experimental and modelling

O Zabihi, H Khayyam, B Fox, M Naebe

(2015), Vol. 39, pp. 2269-2278, New journal of chemistry, London, Eng., C1

Thermal and rheological characteristics of biobased carbon fiber precursor derived from low molecular weight organosolv lignin

A Oroumei, B Fox, M Naebe

(2015), Vol. 3, pp. 758-769, ACS sustainable chemistry and engineering, Washington, D.C., C1

A facile method to enhance ferroelectric properties in PVDF nanocomposites

M Abolhasani, F Zarejousheghani, Z Cheng, M Naebe

(2015), Vol. 5, pp. 22471-22479, RSC Advances, C1

Influence of processing conditions on polymorphic behavior, crystallinity, and morphology of electrospun poly(VInylidene fluoride) nanofibers

M Baqeri, M Abolhasani, M Mozdianfard, Q Guo, A Oroumei, M Naebe

(2015), Vol. 132, pp. 1-10, Journal of applied polymer science, London, Eng., C1

Dynamic prediction models and optimization of polyacrylonitrile (PAN) stabilization processes for production of carbon fiber

H Khayyam, M Naebe, O Zabihi, R Zamani, S Atkiss, B Fox

(2015), Vol. 11, pp. 887-896, IEEE Transactions on Industrial Informatics, Piscataway, N.J., C1

Stochastic optimization models for energy management in carbonization process of carbon fiber production

H Khayyam, M Naebe, A Bab-Hadiashar, F Jamshidi, Q Li, S Atkiss, D Buckmaster, B Fox

(2015), Vol. 158, pp. 643-655, Applied energy, Amsterdam, The Netherlands, C1

Nanoscale variation in energy dissipation in austenitic shape memory alloys in ultimate loading cycles

A Amini, C Yang, C Cheng, M Naebe, Y Xiang

(2015), Vol. 26, pp. 2411-2417, Journal of intelligent material systems and structures, London, Eng., C1

One-pot synthesis of aminated multi-walled carbon nanotube using thiol-ene click chemistry for improvement of epoxy nanocomposites properties

O Zabihi, M Ahmadi, M Akhlaghi Bagherjeri, M Naebe

(2015), Vol. 5, pp. 98692-98699, RSC advances, Cambridge, Eng., C1

Thermoforming and structural analysis of combat helmets

B Cartwright, N Lex Mulcahy, A Chhor, S Thomas, M Suryanarayana, J Sandlin, I Crouch, M Naebe

(2015), Vol. 137, pp. 1-9, Journal of manufacturing science and engineering, New York, N.Y., C1-1

Mechanical property and structure of covalent functionalised graphene / epoxy nanocomposites

M Naebe, J Wang, A Amini, H Khayyam, N Hameed, L Li, Y Chen, B Fox

(2014), Vol. 4, pp. 1-7, Scientific reports, London, England, C1

A new approach for mechanisms of ferroelectric crystalline phase formation in PVDF nanocomposites

M Abolhasani, M Naebe, Q Guo

(2014), Vol. 16, pp. 1-9, Physical chemistry chemical physics, Cambridge, England, C1

Influence of miscibility phenomenon on crystalline polymorph transition in poly(vinylidene fluoride)/ acrylic rubber/clay nanocomposite hybrid

M Abolhasani, M Naebe, A Jalali-Arani, Q Guo

(2014), Vol. 9, pp. 1-8, PLOS one, San Francisco, Ca., C1

An improved understanding of the dispersion of multi-walled carbon nanotubes in non-aqueous solvents

Q Li, J Church, A Kafi, M Naebe, B Fox

(2014), Vol. 16, pp. 1-12, Journal of nanoparticle research, Berlin, Germany, C1

Does dynamic vulcanization induce phase separation?

M Abolhasani, F Zarejousheghani, M Naebe, Q Guo

(2014), Vol. 10, pp. 5550-5558, Soft Matter, England, C1

Crystalline Structures and α → β and γ polymorphs transformation induced by nanoclay in PVDF-based nanocomposite

M Abolhasani, M Naebe, A JAlAli-ArAni, Q Guo

(2014), Vol. 9, pp. 1-1, Nano, Singapore, C1

Temperature variations at nano-scale level in phase transformed nanocrystalline NiTi shape memory alloys adjacent to graphene layers

A Amini, C Cheng, M Naebe, J Church, N Hameed, A Asgari, F Will

(2013), Vol. 5, pp. 6479-6484, Nanoscale, Cambridge, England, C1

Novel polymer-ceramic composites for protection against ballistic fragments

M Naebe, J Sandlin, I Crouch, B Fox

(2013), Vol. 34, pp. 180-186, Polymer composites, London, England, C1

Ageing of surface treated thermoplastic polyolefins

F Awaja, M Gilbert, M Naebe, G Kelly, B Fox, R Brynolf, P Pigram

(2013), Vol. 98, pp. 1699-1704, Polymer degradation and stability, Amsterdam, The Netherlands, C1

Preparation and properties of composition-controlled carbon nanofiber/phenolic nanocomposites

E Bafekrpour, G Simon, M Naebe, J Habsuda, C Yang, B Fox

(2013), Vol. 52, pp. 120-126, Composites part B : engineering, Amsterdam, The Netherlands, C1

Enzyme immobilisation on amino-functionalised multi-walled carbon nanotubes : structural and biocatalytic characterisation

M Verma, M Naebe, C Barrow, M Puri

(2013), Vol. 8, pp. 1-9, PLoS one, San Francisco, Calif., C1

Phase transformation evolution in NiTi shape memory alloy under cyclic nanoindentation loadings at dissimilar rates

A Amini, C Cheng, Q Kan, M Naebe, H Song

(2013), Vol. 3, pp. 1-7, Scientific reports, London, England, C1

Fabrication and characterization of functionally graded synthetic graphite/phenolic nanocomposites

E Bafekrpour, G Simon, J Habsuda, M Naebe, C Yang, B Fox

(2012), Vol. 545, pp. 123-131, Materials science and engineering A, Lausanne, Switzerland, C1

Effect of compositional gradient on thermal behavior of synthetic graphite-phenolic nanocomposites

E Bafekrpour, G Simon, C Yang, J Habsuda, M Naebe, B Fox

(2012), Vol. 109, pp. 1169-1176, Journal of thermal analysis and calorimetry, Berlin, Germany, C1

Carbon nanotube reinforced rigid-rod polyimide

M Naebe, J Wang, Y Xue, X Wang, T Lin

(2010), Vol. 118, pp. 359-365, Journal of applied polymer science, Hoboken, N.J., C1

Improvement in mechanical properties of aluminum polypropylene composite fiber

M Naebe, C Hurren, A Maazouz, K Lamawar, X Wang

(2009), Vol. 10, pp. 662-666, Fibers and polymers, Amsterdam, Netherlands, C1-1

Electrospun single-walled carbon nanotube/polyvinyl alcohol composite nanofibers : structure-property relationships

M Naebe, T Lin, M Staiger, L Dai, X Wang

(2008), Vol. 19, pp. 1-8, Nanotechnology, London, England, C1

Effects of MWNT nanofillers on structures and properties of PVA electrospun nanofibres

M Naebe, T Lin, W Tian, L Dai, X Wang

(2007), Vol. 18, pp. 1-8, Nanotechnology, Bristol, England, C1