Dr Omid Zabihi

STAFF PROFILE

Position

Associate Research Fellow

Faculty

Instit for Frontier Materials

Department

Instit for Frontier Materials

Campus

Geelong Waurn Ponds Campus

Publications

Filter by

2020

A sustainable approach to scalable production of a graphene based flame retardant using waste fish deoxyribonucleic acid

O Zabihi, M Ahmadi, Q Li, M Ferdowsi, R Mahmoodi, E Kalali, D Wang, M Naebe

(2020), Vol. 247, Journal of Cleaner Production, C1

journal
2019

Low-cost carbon fibre derived from sustainable coal tar pitch and polyacrylonitrile: fabrication and characterisation

O Zabihi, S Shafei, S Fakhrhoseini, M Ahmadi, H Nazarloo, R Stanger, Q Tran, J Lucas, T Wall, M Naebe

(2019), Vol. 12, pp. 1-14, Materials, Basel, Switzerland, C1

journal

Simultaneous electrochemical-assisted exfoliation and in situ surface functionalization towards large-scale production of few-layer graphene

O Zabihi, M Ahmadi, Q Li, S Fakhrhoseini, Z Komeily Nia, M Arjmand, K Parvez, M Naebe

(2019), Vol. 18, pp. 1-10, FlatChem, Amsterdam, The Netherlands, C1

journal

A hydrothermal-assisted ball milling approach for scalable production of high-quality functionalized MoS? nanosheets for polymer nanocomposites

M Ahmadi, O Zabihi, Q Li, S Fakhrhoseini, M Naebe

(2019), Vol. 9, pp. 1-21, Nanomaterials, Basel, Switzerland, C1

journal

Natural bauxite nanosheets: a multifunctional and sustainable 2D nano-reinforcement for high performance polymer nanocomposites

O Zabihi, M Ahmadi, M Ghandehari Ferdowsi, Q Li, S Fakhrhoseini, R Mahmoodi, A Ellis, M Naebe

(2019), Vol. 184, pp. 1-9, Composites science and technology, Amsterdam, The Netherlands, C1

journal
2018

A technical review on epoxy-clay nanocomposites: structure, properties, and their applications in fiber reinforced composites

O Zabihi, M Ahmadi, S Nikafshar, K Chandrakumar Preyeswary, M Naebe

(2018), Vol. 135, pp. 1-24, Composites part B: engineering, Amsterdam, The Netherlands, C1

journal

Nano-enhanced interface in carbon fibre polymer composite using halloysite nanotubes

M Jger, O Zabihi, M Ahmadi, Q Li, A Depalmeanar, M Naebe

(2018), Vol. 109, pp. 115-123, Composites part A: applied science and manufacturing, Amsterdam, The Netherlands, C1

journal
2017

Electroactive nanostructured scaffold produced by controlled deposition of PPy on electrospun PCL fibres

S Shafei, J Foroughi, L Stevens, C Wong, O Zabihi, M Naebe

(2017), Vol. 43, pp. 1235-1251, Research on Chemical Intermediates, C1

journal

Hydrophilic PAN based carbon nanofibres with improved graphitic structure and enhanced mechanical performance using ethylenediamine functionalized graphene

Z Li, O Zabihi, J Wang, Q Li, J Wang, W Lei, M Naebe

(2017), Vol. 7, pp. 2621-2628, RSC Advances, C1

journal

A renewable bio-based epoxy resin with improved mechanical performance that can compete with DGEBA

S Nikafshar, O Zabihi, S Hamidi, Y Moradi, S Barzegar, M Ahmadi, M Naebe

(2017), Vol. 7, pp. 8694-8701, RSC Advances, C1

journal

Self-assembly of quaternized chitosan nanoparticles within nanoclay layers for enhancement of interfacial properties in toughened polymer nanocomposites

O Zabihi, M Ahmadi, M Naebe

(2017), Vol. 119, pp. 277-289, Materials and Design, C1

journal

The effects of UV light on the chemical and mechanical properties of a transparent epoxy-diamine system in the presence of an organic UV absorber

S Nikafshar, O Zabihi, M Ahmadi, A Mirmohseni, M Taseidifar, M Naebe

(2017), Vol. 10, pp. 1-18, Materials, Basel, Switzerland, C1

journal

Collision-induced activation: towards industrially scalable approach to graphite nanoplatelets functionalization for superior polymer nanocomposites

O Zabihi, M Ahmadi, T Abdollahi, S Nikafshar, M Naebe

(2017), Vol. 7, pp. 1-13, Scientific reports, London, Eng., C1

journal

Carbon fibre surface modification using functionalized nanoclay: a hierarchical interphase for fibre-reinforced polymer composites

O Zabihi, M Ahmadi, Q Li, S Shafei, M Huson, M Naebe

(2017), Vol. 148, pp. 49-58, Composites science and technology, Kidlington, Eng., C1

journal

Catalyzed synthesis and characterization of a novel lignin-based curing agent for the curing of high-performance epoxy resin

S Nikafshar, O Zabihi, Y Moradi, M Ahmadi, S Amiri, M Naebe

(2017), Vol. 9, pp. 1-16, Polymers, Basel, Switzerland, C1-1

journal
2016

One-step amino-functionalization of milled carbon fibre for enhancement of thermo-physical properties of epoxy composites

O Zabihi, M Ahmadi, S Shafei, S Seraji, A Oroumei, M Naebe

(2016), Vol. 88, pp. 243-252, Composites part A: applied science and manufacturing, Amsterdam, The Netherlands, C1

journal

Synergistic effect of MWCNTs functionalization on interfacial and mechanical properties of multi-scale UHMWPE fibre reinforced epoxy composites

M Ahmadi, O Zabihi, M Masoomi, M Naebe

(2016), Vol. 134, pp. 1-11, Composites science and technology, Amsterdam, The Netherlands, C1

journal

Fish DNA-modified clays: towards highly flame retardant polymer nanocomposite with improved interfacial and mechanical performance

O Zabihi, M Ahmadi, H Khayyam, M Naebe

(2016), Vol. 6, pp. 1-17, Scientific reports, London, Eng., C1

journal
2015

Enhanced thermal stability and lifetime of epoxy nanocomposites using covalently functionalized clay: Experimental and modelling

O Zabihi, H Khayyam, B Fox, M Naebe

(2015), Vol. 39, pp. 2269-2278, New journal of chemistry, London, Eng., C1

journal

Dynamic prediction models and optimization of polyacrylonitrile (PAN) stabilization processes for production of carbon fiber

H Khayyam, M Naebe, O Zabihi, R Zamani, S Atkiss, B Fox

(2015), Vol. 11, pp. 887-896, IEEE Transactions on Industrial Informatics, Piscataway, N.J., C1

journal

One-pot synthesis of aminated multi-walled carbon nanotube using thiol-ene click chemistry for improvement of epoxy nanocomposites properties

O Zabihi, M Ahmadi, M Akhlaghi Bagherjeri, M Naebe

(2015), Vol. 5, pp. 98692-98699, RSC advances, Cambridge, Eng., C1

journal
2013

Preparation and characterization of toughened composites of epoxy/poly(3,4-ethylenedioxythiophene) nanotube: thermal, mechanical and electrical properties

Omid Zabihi

(2013), Vol. 45, pp. 1480-1485, Composites part B: engineering, Amsterdam, The Netherlands, C1

journal

Funded Projects at Deakin

Other Public Sector Funding

Catalyst Assisted Polyethylene (PE) Recycling

A/Prof Minoo Naebe, Dr Kamyar Shirvani Moghaddam, Dr Omid Zabihi, Dr Sobhan Fakhrhoseini

  • 2020: $50,000

Supervisions

No completed student supervisions to report