A/Prof. Peter Lynch

Influence of precipitation on tension and compression twinning in Mg-6.5Zn alloy

Jun Wang, M Ghandehari Ferdowsi, Peter Lynch, Sitarama Kada, Matthew Barnett

(2022), Vol. 207, pp. 1-7, Scripta Materialia, Amsterdam, The Netherlands, C1

Appearance of textures with a c-axis parallel to the extrusion direction in Mg alloys

J Wang, M Ferdowsi, S Kada, S Babaniaris, B Hutchinson, P Lynch, M Barnett

(2022), Vol. 210, pp. 1-5, Scripta Materialia, Amsterdam, The Netherlands, C1

Toughening Wet-Spun Silk Fibers by Silk Nanofiber Templating

Y Yao, B Allardyce, R Rajkhowa, D Hegh, S Qin, K Usman, P Mota-Santiago, J Zhang, P Lynch, X Wang, D Kaplan, J Razal

(2022), Vol. 43, Macromolecular Rapid Communications, Germany, C1

Dislocation structures in a Ti-6Al-4V alloy subjected to cyclic tensile deformation

P Cizek, S Kada, N Armstrong, R Antoniou, S Slater, P Lynch

(2022), Vol. 836, pp. 1-16, Materials Science and Engineering A, Amsterdam, The Netherlands, C1

Inducing liquid crystallinity in dilute MXene dispersions for facile processing of multifunctional fibers

Ken Usman, Jizhen Zhang, Si Qin, Ya Yao, Peter Lynch, Pablo Mota-Santiago, Minoo Naebe, Luke Henderson, Dylan Hegh, Joselito Razal

(2022), Vol. 10, pp. 4770-4781, Journal of Materials Chemistry A, Cambridge, Eng., C1

Tough and Fatigue Resistant Cellulose Nanocrystal Stitched Ti3C2Tx MXene Films

K Usman, C Bacal, J Zhang, S Qin, P Lynch, P Mota-Santiago, M Naebe, L Henderson, D Hegh, J Razal

(2022), Vol. 43, pp. 1-10, Macromolecular Rapid Communications, London, Eng., C1

High molecular weight improves microstructure and mechanical properties of polyacrylonitrile based carbon fibre precursor

J Kaur, L Hillbrick, A Abbott, P Lynch, P Mota-Santiago, A Pierlot

(2022), Vol. 247, pp. 1-11, Polymer, Amsterdam, The Netherlands, C1

Environmentally stable MXene ink for direct writing flexible electronics

N Kong, J Zhang, D Hegh, K Usman, S Qin, P Lynch, W Yang, J Razal

(2022), Vol. 14, pp. 6299-6304, Nanoscale, Cambridge, Eng., C1

Tension-induced toughening and conductivity enhancement in sequentially bridged MXene fibers

Ken Usman, Jizhen Zhang, Christine Bacal, Si Qin, Pablo Mota-Santiago, Peter Lynch, Minoo Naebe, Luke Henderson, Dylan Hegh, Joselito Razal

(2022), Vol. 9, 2D MATERIALS, C1

Spinning Regenerated Silk Fibers with Improved Toughness by Plasticizing with Low Molecular Weight Silk

Y Yao, B Allardyce, R Rajkhowa, C Guo, X Mu, D Hegh, J Zhang, P Lynch, X Wang, D Kaplan, J Razal

(2021), Vol. 22, pp. 788-799, Biomacromolecules, United States, C1

Stress relaxations during cyclic loading-unloading in precipitation hardened Mg-4.5Zn

J Wang, M Ferdowsi, S Kada, P Lynch, Z Wang, J Kimpton, M Barnett

(2021), Vol. 205, Acta Materialia, C1

X-ray analysis of twin dominated deformation in an aged Mg-7Sn-3Zn-0.04Na alloy

E Motlagh, P Lynch, T Dorin, P Cizek, A Ghaderi, M Barnett, S Kada

(2021), Vol. 9, pp. 1201-1210, Journal of Magnesium and Alloys, C1

Transmission electron microscopy investigation of the dislocation structure in a Ti-6Al-4V alloy subjected to an early stage of cyclic deformation

P Cizek, S Kada, J Wang, N Armstrong, R Antoniou, P Lynch

(2021), Vol. 172, Materials Characterization, C1

Sequentially Bridged Ti3C2Tx MXene Sheets for High Performance Applications

K Usman, J Zhang, D Hegh, A Rashed, D Jiang, P Lynch, P Mota-Santiago, K Jarvis, S Qin, E Prime, M Naebe, L Henderson, J Razal

(2021), Vol. 8, Advanced Materials Interfaces, C1

Deformation modes during room temperature tension of fine-grained pure magnesium

Z Zeng, M Zhou, P Lynch, F Mompiou, Q Gu, M Esmaily, Y Yan, Y Qiu, S Xu, H Fujii, C Davies, J Nie, N Birbilis

(2021), Vol. 206, Acta Materialia, C1

Bayesian analysis reveals the impact of load partitioning on microstructural evolution in Ti-6Al-4V during in-situ tensile loading

N Armstrong, P Lynch, P Cizek, S Kada, S Slater, R Antoniou

(2021), Vol. 15, Materialia, C1

Additive-Free MXene Liquid Crystals and Fibers

J Zhang, S Uzun, S Seyedin, P Lynch, B Akuzum, Z Wang, S Qin, M Alhabeb, C Shuck, W Lei, E Kumbur, W Yang, X Wang, G Dion, J Razal, Y Gogotsi

(2020), Vol. 6, pp. 254-265, ACS Central Science, Washington, D.C., C1

Scalable Manufacturing of Free-Standing, Strong Ti3C2Tx MXene Films with Outstanding Conductivity

J Zhang, N Kong, S Uzun, A Levitt, S Seyedin, P Lynch, S Qin, M Han, W Yang, J Liu, X Wang, Y Gogotsi, J Razal

(2020), Vol. 32, Advanced Materials, Germany, C1

An in situ synchrotron study of the localized B2↔B19' phase transformation in an Ni-Ti alloy subjected to uniaxial cyclic loading-unloading with incremental strains

X Bian, A Saleh, P Lynch, C Davies, A Gazder, E Pereloma

(2020), Vol. 53, pp. 335-348, Journal of Applied Crystallography, Chester, Eng., C1

Dislocation structures representing individual slip systems within the α phase of a Ti-6Al-4V alloy deformed in tension

P Cizek, S Kada, J Wang, N Armstrong, R Antoniou, P Lynch

(2020), Vol. 797, Materials Science and Engineering A, C1

An in-situ synchrotron study of the B2→B19′ phase transformation in a Ni-Ti alloy subjected to uniaxial monotonic tension

X Bian, A Saleh, P Lynch, C Davies, E Pereloma, A Gazder

(2019), Vol. 743, pp. 327-338, Materials Science and Engineering A, C1

Highly Conductive Ti 3 C 2 T x MXene Hybrid Fibers for Flexible and Elastic Fiber-Shaped Supercapacitors

J Zhang, S Seyedin, S Qin, Z Wang, S Moradi, F Yang, P Lynch, W Yang, J Liu, X Wang, J Razal

(2019), Vol. 15, Small, Germany, C1

Fast and scalable wet-spinning of highly conductive PEDOT:PSS fibers enables versatile applications

J Zhang, S Seyedin, S Qin, P Lynch, Z Wang, W Yang, X Wang, J Razal

(2019), Vol. 7, pp. 6401-6410, Journal of Materials Chemistry A, London, Eng., C1

Plastic yielding in lath martensites - an alternative viewpoint

B Hutchinson, P Bate, D Lindell, A Malik, M Barnett, P Lynch

(2018), Vol. 152, pp. 239-247, Acta materialia, Amsterdam, The Netherlands, C1

Synchrotron X-ray scattering and IR-mapping studies of wet-spun lignin-derived carbon fibre precursor

A Oroumei, P Lynch, M Tobin, M Naebe

(2018), Vol. 163, pp. 151-161, Composites science and technology, Amsterdam, The Netherlands, C1

A high-resolution synchrotron-based diffraction technique for in situ characterization of deformation behaviour in magnesium alloys

Z Wang, P Lynch, S Kada, N Armstrong, E Motlagh, J Kimpton, M Barnett

(2018), Vol. 51, pp. 1082-1093, Journal of Applied Crystallography, C1

Characterizing Grain-Oriented Silicon Steel Sheet Using Automated High-Resolution Laue X-ray Diffraction

P Lynch, M Barnett, A Stevenson, B Hutchinson

(2017), Vol. 48, pp. 5206-5210, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1-1

In-situ X-ray diffraction studies of slip and twinning in the presence of precipitates in AZ91 alloy

S Kada, P Lynch, J Kimpton, M Barnett

(2016), Vol. 119, pp. 145-156, Acta materialia, Amsterdam, The Netherlands, C1

Development of a laboratory-based transmission diffraction technique for in situ deformation studies of Mg alloys

S Kada, P Lynch, M Barnett

(2015), Vol. 48, pp. 365-376, Journal of Applied Crystallography, C1

Stress evolution during tensile twinning in MgAZ31 alloy processed by extrusion

K Raju, P Lynch, M Barnett

(2014), Vol. 773-774, pp. 104-108, Materials science forum, Pfaffikon, Switzerland, C1-1

Time and spatial resolution of slip and twinning in a grain embedded within a magnesium polycrystal

P Lynch, M Kunz, N Tamura, M Barnett

(2014), Vol. 78, pp. 203-212, Acta Materialia, Amsterdam, The Netherlands, C1

In situ study of plastic deformation in a Mg-Ce alloy using polychromatic micro X-ray diffraction

P Lynch, A Stevenson, D Liang, C Bettles

(2012), Vol. 550, pp. 1-9, Materials science and engineering A, Amsterdam, The Netherlands, C1

Direct observation of the intergallery expansion of polystyrene-montmorillonite nanocomposites

R Simons, G Qiao, S Bateman, X Zhang, P Lynch

(2011), Vol. 23, pp. 2303-2311, Chemistry of materials, Washington, D.C., C1-1

A uniaxial tensile stage with tracking capabilities for micro X-ray diffraction applications

P Lynch, D Parry, D Liang, R Kirkham, P Davey, A Stevenson, C Bettles, M Gibson, D Tomus

(2011), Vol. 44, pp. 610-617, Journal of applied crystallography, Malden, Mass., C1-1

In situ observation of strain evolution in Cp-Ti over multiple length scales

C Bettles, P Lynch, A Stevenson, D Tomus, M Gibson, K Wallwork, J Kimpton

(2011), Vol. 42, pp. 100-110, Metallurgical and materials transactions A, New York, N.Y., C1-1

Application of white-beam X-ray microdiffraction for the study of mineralogical phase identification in ancient Egyptian pigments

P Lynch, N Tamura, D Lau, I Madsen, D Liang, M Strohschnieder, A Stevenson

(2011), Vol. 40, pp. 1089-1096, Journal of applied crystallography, Malden, Mass., C1-1

An in situ method for the study of strain broadening using synchrotron X-ray diffraction

C Tang, P Lynch, R Cheary, S Clark

(2011), Vol. 40, pp. 642-649, Journal of applied crystallography, Malden, Mass., C1-1

Elemental and mineralogical study of earth-based pigments using particle induced X-ray emission and X-ray diffraction

P Nel, P Lynch, J Laird, H Casey, L Goodall, C Ryan, R Sloggett

(2010), Vol. 619, pp. 306-310, Nuclear instruments and methods in physics research, section A : accelerators, spectrometers, detectors and associated equipment, Amsterdam, The Netherlands, C1-1

A comparative EBSD and micro-XRD study of the intergranular grain structure in CP-Ti

P Lynch, D Tomus, C Bettles, M Gibson, A Stevenson

(2010), Vol. 619, pp. 298-301, Nuclear instruments and methods in physics research, section A : accelerators, spectrometers, detectors and associated equipment, Amsterdam, The Netherlands, C1-1

In-situ observation of strain evolution in CP-Ti during uniaxial tensile loading

C Bettles, M Gibson, A Stevenson, D Tomus, P Lynch

(2010), Vol. 619, pp. 302-305, Nuclear instruments and methods in physics research, section A : accelerators, spectrometers, detectors and associated equipment, Amsterdam, The Netherlands, C1-1

In-situ white beam microdiffraction study of the deformation behavior in polycrystalline magnesium alloy during uniaxial loading

P Lynch, A Stevenson, D Liang, D Parry, S Wilkins, I Madsen, C Bettles, N Tamura, G Geandier

(2007), Vol. 879, pp. 1751-1754, AIP conference proceedings, New York, N. Y., C1-1

A laboratory based system for Laue micro x-ray diffraction

P Lynch, A Stevenson, D Liang, D Parry, S Wilkins, N Tamura

(2007), Vol. 78, pp. 1-10, Review of scientific instuments, College Park, Md., C1-1

Influence of hydrogen peroxide in the preparation of nanocrystalline ceria

F Scholes, A Hughes, S Hardin, P Lynch, P Miller

(2007), Vol. 19, pp. 2321-2328, Chemistry of materials, Washington, D.C., C1-1

X-ray diffraction line broadening from gold and platinum thin films

P Lynch, R Cheary, E Dooryhee, N Armstrong, C Tang

(2001), Vol. 378-381, pp. 358-363, Materials science forum, Stafa-Zurich, Switzerland, C1-1

In-situ studies of X-ray diffraction line profiles from strained copper foils

R Cheary, C Tang, P Lynch, M Roberts, S Clark

(2001), Vol. 378-381, pp. 254-261, Materials science forum, Stafa-Zurich, Switzerland, C1-1

X-ray diffraction line broadening from thermally deposited gold films

R Cheary, E Dooryhee, P Lynch, N Armstrong, S Dligatch

(2000), Vol. 33, pp. 1271-1283, Journal of applied crystallography, Malden, Mass., C1-1

Investigation of the interfacial structure of ultra-thin platinum films using X-ray reflectivity and X-ray photoelectron spectroscopy

D Salina, R Cheary, P Swift, S Dligatch, G McCredie, B Gong, P Lynch

(2000), Vol. 372, pp. 94-103, Thin solid films, Amsterdam, The Netherlands, C1-1