Dr Pobitra Halder

Techno-economic analysis of ionic liquid pre-treatment integrated pyrolysis of biomass for co-production of furfural and levoglucosenone

P Halder, K Shah

(2023), Vol. 371, pp. 128587-128587, Bioresource Technology, England, C1

Investigations into the closed-loop hydrometallurgical process for heavy metals removal and recovery from biosolids via mild acid pre-treatment

I Hakeem, P Halder, S Aktar, M Marzbali, A Sharma, A Surapaneni, G Short, J Paz-Ferreiro, K Shah

(2023), Vol. 218, pp. 1-14, Hydrometallurgy, Amsterdam, The Netherlands, C1

Enhancing the pyrolytic conversion of biosolids to value-added products via mild acid pre-treatment

Ibrahim Hakeem, Pobitra Halder, Savankumar Patel, Abhishek Sharma, Rajender Gupta, Aravind Surapaneni, Jorge Paz-Ferreiro, Kalpit Shah

(2023), Vol. 173, pp. 1-16, Journal of Analytical and Applied Pyrolysis, Amsterdam, The Netherlands, C1

Advancements in hydrogen production, storage, distribution and refuelling for a sustainable transport sector: Hydrogen fuel cell vehicles

Pobitra Halder, Meisam Babaie, Farhad Salek, Nawshad Haque, Russell Savage, Svetlana Stevanovic, Timothy Bodisco, Ali Zare

(2023), pp. 1-32, International Journal of Hydrogen Energy, Amsterdam, The Netherlands, C1

Co-pyrolysis of biosolids with alum sludge: Effect of temperature and mixing ratio on product properties

N Rathnayake, S Patel, P Halder, S Aktar, J Pazferreiro, A Sharma, A Surapaneni, K Shah

(2022), Vol. 163, pp. 1-14, Journal of Analytical and Applied Pyrolysis, Amsterdam, The Netherlands, C1-1

Conversion of pyrolytic non-condensable gases from polypropylene co-polymer into bamboo-type carbon nanotubes and high-quality oil using biochar as catalyst

K Shah, S Patel, P Halder, S Kundu, M Marzbali, I Hakeem, B Pramanik, K Chiang, T Patel

(2022), Vol. 301, pp. 1-11, Journal of Environmental Management, Amsterdam, The Netherlands, C1

Source and central level recovery of nutrients from urine and wastewater: A state-of-art on nutrients mapping and potential technological solutions

S Kundu, B Pramanik, P Halder, S Patel, M Ramezani, M Khairul, M Marzbali, J Paz-Ferreiro, S Crosher, G Short, A Surapaneni, D Bergmann, K Shah

(2022), Vol. 10, pp. 1-24, Journal of Environmental Chemical Engineering, Amsterdam, The Netherlands, C1-1

Mild sulphuric acid pre-treatment for metals removal from biosolids and the fate of metals in the treated biosolids derived biochar

I Hakeem, P Halder, M Marzbali, S Patel, N Rathnayake, A Surapaneni, G Short, J Paz-Ferreiro, K Shah

(2022), Vol. 10, pp. 1-14, Journal of Environmental Chemical Engineering, Amsterdam, The Netherlands, C1-1

Mechanistic and kinetic study of the hydrothermal treatment of paunch waste

Mojtaba Hedayati Marzbali, Amir Saberi, Pobitra Halder, Jorge Paz-Ferreiro, Srinivasaiah Dasappa, Kalpit Shah

(2022), Vol. 177, pp. 541-553, Chemical Engineering Research and Design, Amsterdam, The Netherlands, C1

Advances in biosolids pyrolysis: Roles of pre-treatments, catalysts, and co-feeding on products distribution and high-value chemical production

Ibrahim Hakeem, Pobitra Halder, Charles Dike, Ken Chiang, Abhishek Sharma, Jorge Paz-Ferreiro, Kalpit Shah

(2022), Vol. 166, pp. 1-29, Journal of Analytical and Applied Pyrolysis, Amsterdam, The Netherlands, C1

Progress on the demand side management in smart grid and optimization approaches

E Sarker, P Halder, M Seyedmahmoudian, E Jamei, B Horan, S Mekhilef, A Stojcevski

(2021), Vol. 45, pp. 36-64, International Journal of Energy Research, C1

Garments furniture design for Bangladeshi workers considering ergonomic principles

M Hoque, P Halder, S Rahman, T Ahmed, T Szecsi

(2021), Vol. 70, pp. 657-671, Work, Netherlands, C1

Recycling biosolids as cement composites in raw, pyrolyzed and ashed forms: A waste utilisation approach to support circular economy

R Roychand, S Patel, P Halder, S Kundu, J Hampton, D Bergmann, A Surapaneni, K Shah, B Pramanik

(2021), Vol. 38, Journal of Building Engineering, C1

Hydrothermal carbonisation of raw and dewatered paunch waste: Experimental observations, process modelling and techno-economic analysis

M Hedayati Marzbali, S Kundu, S Patel, P Halder, J Paz-Ferreiro, S Madapusi, K Shah

(2021), Vol. 245, Energy Conversion and Management, C1

Research progress on levoglucosan production via pyrolysis of lignocellulosic biomass and its effective recovery from bio-oil

I Hakeem, P Halder, M Marzbali, S Patel, S Kundu, J Paz-Ferreiro, A Surapaneni, K Shah

(2021), Vol. 9, Journal of Environmental Chemical Engineering, C1

Removal of PFASs from biosolids using a semi-pilot scale pyrolysis reactor and the application of biosolids derived biochar for the removal of PFASs from contaminated water

S Kundu, S Patel, P Halder, T Patel, M Hedayati Marzbali, B Pramanik, J Paz-Ferreiro, C De Figueiredo, D Bergmann, A Surapaneni, M Megharaj, K Shah

(2021), Vol. 7, pp. 638-649, Environmental Science: Water Research and Technology, Cambridge, England, C1

Dissolution reaction kinetics and mass transfer during aqueous choline chloride pre-treatment of oak wood

P Halder, S Patel, S Kundu, I Gbolahan Hakeem, M Hedayati Marzbali, B Pramanik, K Shah

(2021), Vol. 322, pp. 1-9, Bioresource Technology, Amsterdam, The Netherlands, C1

Investigations into distribution and characterisation of products formed during hydrothermal carbonisation of paunch waste

M Marzbali, J Paz-Ferreiro, S Kundu, M Ramezani, P Halder, S Patel, T White, S Madapusi, K Shah

(2021), Vol. 9, pp. 104672-104672, Journal of Environmental Chemical Engineering, C1

Furfural and levoglucosenone production from the pyrolysis of ionic liquid pre-treated sugarcane straw

P Halder, S Kundu, S Patel, M Marzbali, R Parthasarathy, K Shah

(2021), Vol. 28, pp. 133-151, Cellulose, C1

Performance, Emission and Combustion Characteristics of a Diesel Engine Powered by Macadamia and Grapeseed Biodiesels

A Azad, J Adhikari, P Halder, M Rasul, N Hassan, M Khan, S Naqvi, K Viswanathan

(2020), Vol. 13, pp. 1-19, Energies, Basel, Switzerland, C1

A critical literature review on biosolids to biochar: an alternative biosolids management option

S Patel, S Kundu, P Halder, N Ratnnayake, M Marzbali, S Aktar, E Selezneva, J Paz-Ferreiro, A Surapaneni, C de Figueiredo, A Sharma, M Megharaj, K Shah

(2020), Vol. 19, pp. 807-841, Reviews in Environmental Science and Biotechnology, C1

Production of hydrogen by catalytic methane decomposition using biochar and activated char produced from biosolids pyrolysis

S Patel, S Kundu, P Halder, M Marzbali, K Chiang, A Surapaneni, K Shah

(2020), Vol. 45, pp. 29978-29992, International Journal of Hydrogen Energy, C1

Investigation of Reaction Mechanism and the Effects of Process Parameters on Ionic Liquid-Based Delignification of Sugarcane Straw

P Halder, S Kundu, S Patel, M Marzbali, R Parthasarathy, K Shah

(2020), Vol. 13, pp. 1144-1158, Bioenergy Research, C1

Slow pyrolysis of biosolids in a bubbling fluidised bed reactor using biochar, activated char and lime

S Patel, S Kundu, P Halder, G Veluswamy, B Pramanik, J Paz-Ferreiro, A Surapaneni, K Shah

(2019), Vol. 144, Journal of Analytical and Applied Pyrolysis, C1

Transformation of biosolids to biochar: A case study

S Patel, S Kundu, J Paz-Ferreiro, A Surapaneni, L Fouche, P Halder, A Setiawan, K Shah

(2019), Vol. 38, Environmental Progress and Sustainable Energy, C1

AHP based Anthropometric Analysis of University Hall Bed Design in Bangladesh

P Halder, E Sarker, C Karmaker

(2019), Vol. 100, pp. 591-599, Journal of The Institution of Engineers (India): Series C, C1

Progress on the pre-treatment of lignocellulosic biomass employing ionic liquids

P Halder, S Kundu, S Patel, A Setiawan, R Atkin, R Parthasarthy, J Paz-Ferreiro, A Surapaneni, K Shah

(2019), Vol. 105, pp. 268-292, Renewable and Sustainable Energy Reviews, C1

Thermogravimetric Analysis of biosolids pyrolysis in the presence of mineral oxides

S Patel, S Kundu, P Halder, L Rickards, J Paz-Ferreiro, A Surapaneni, S Madapusi, K Shah

(2019), Vol. 141, pp. 707-716, Renewable Energy, C1

Customer driven quality improvement of a specific product through AHP and entropy-based QFD: A case study

C Karmaker, P Halder, S Ahmed

(2019), Vol. 11, pp. 389-414, International Journal of the Analytic Hierarchy Process, C1

A Comparison of Ionic Liquids and Organic Solvents on the Separation of Cellulose-Rich Material from River Red Gum

P Halder, S Kundu, S Patel, M Ramezani, R Parthasarathy, K Shah

(2019), Vol. 12, pp. 275-291, Bioenergy Research, C1

TGA-FTIR study on the slow pyrolysis of lignin and cellulose-rich fractions derived from imidazolium-based ionic liquid pre-treatment of sugarcane straw

P Halder, S Kundu, S Patel, R Parthasarathy, B Pramanik, J Paz-Ferreiro, K Shah

(2019), Vol. 200, Energy Conversion and Management, C1

Ergonomic considerations for designing truck drivers' seats: The case of Bangladesh

P Halder, T Mahmud, E Sarker, C Karmaker, S Kundu, S Patel, A Setiawan, K Shah

(2018), Vol. 60, pp. 64-73, Journal of Occupational Health, Australia, C1

A Hybrid Kinetic Analysis of the Biosolids Pyrolysis using Thermogravimetric Analyser

S Patel, S Kundu, P Halder, A Setiawan, J Paz-Ferreiro, A Surapaneni, K Shah

(2018), Vol. 3, pp. 13400-13407, ChemistrySelect, C1

Experimental investigation of different characteristics of biodiesel derived from waste cooking and pure sunflower oil

M Khan, M Khatun, M Bhuiyan, P Halder

(2018), Vol. 13, pp. 11-25, Journal of Sustainability Science and Management, C1

Performance improvement of modified dye-sensitized solar cells

M Khan, M Al-Mamun, P Halder, M Aziz

(2017), Vol. 71, pp. 602-617, Renewable and Sustainable Energy Reviews, C1

Design, Fabrication, and Efficiency Study of a Novel Solar Thermal Water Heating System: Towards Sustainable Development

M Khan, M Al-Mamun, S Sikdar, P Halder, M Hasan

(2016), Vol. 2016, International Journal of Photoenergy, C1

Ergonomic design of a Bangladesh bus passenger seat

M Hoque, P Halder, P Fouzder, Z Iqbal

(2016), Vol. 13, pp. 157-172, Occupational Ergonomics, C1

Static Anthropometric Characteristics of Bangladeshi Vehicle Driver: A Case Study

P Halder, E Sarker

(2016), Vol. 2016, Scientifica, Egypt, C1

Fuel properties of pyrolytic tyre oil and its blends with diesel fuel - Towards waste management

M Khan, M Hossain, P Halder, M Hasan, M Al-Mamun

(2016), Vol. 18, pp. 335-348, International Journal of Environment and Waste Management, C1

Potential and economic feasibility of solar home systems implementation in Bangladesh

P Halder

(2016), Vol. 65, pp. 568-576, Renewable and Sustainable Energy Reviews, C1

Feasibility analysis of implementing anaerobic digestion as a potential energy source in Bangladesh

P Halder, N Paul, M Joardder, M Khan, M Sarker

(2016), Vol. 65, pp. 124-134, Renewable and Sustainable Energy Reviews, C1

Electrical energy conservation through human behavior change: Perspective in Bangladesh

I Khan, P Halder

(2016), Vol. 6, pp. 43-52, International Journal of Renewable Energy Research, C1

Energy scarcity and potential of renewable energy in Bangladesh

P Halder, N Paul, M Joardder, M Sarker

(2015), Vol. 51, pp. 1636-1649, Renewable and Sustainable Energy Reviews, C1-1

Assessment of biomass energy resources and related technologies practice in Bangladesh

P Halder, N Paul, M Beg

(2014), Vol. 39, pp. 444-460, Renewable and Sustainable Energy Reviews, C1-1

Ergonomic design of classroom furniture for university students of Bangladesh

A Hoque, M Parvez, P Halder, T Szecsi

(2014), Vol. 31, pp. 239-252, Journal of Industrial and Production Engineering, C1-1

Integrated manufacturing features and Design-for-manufacture guidelines for reducing product cost under CAD/CAM environment

A Hoque, P Halder, M Parvez, T Szecsi

(2013), Vol. 66, pp. 988-1003, Computers and Industrial Engineering, C1-1