Dr Qi Chao

STAFF PROFILE

Position

Research Fellow

Faculty

Faculty of Sci Eng & Built Env

Department

School of Engineering

Campus

Geelong Waurn Ponds Campus

Contact

qi.chao@deakin.edu.au
+61 3 522 78320

Publications

Filter by

2020

A parallel version of the cellular automata static recrystallization model dedicated for high performance computing platforms - Development and verification

M Sitko, Q Chao, J Wang, K Perzynski, K Muszka, L Madej

(2020), Vol. 172, pp. 1-13, Computational Materials Science, Amsterdam, The Netherlands, C1

journal article

Electrochemical studies on the effect of residual stress on the corrosion of 316L manufactured by selective laser melting

V Cruz, Q Chao, N Birbilis, D Fabijanic, P Hodgson, S Thomas

(2020), Vol. 164, pp. 1-9, Corrosion Science, Amsterdam, The Netherlands, C1

journal article
2019

A microstructural based constitutive approach for simulating hot deformation of Ti6Al4V alloy in the ??+?? phase region

P Souza, J Mendiguren, Q Chao, H Beladi, P Hodgson, B Rolfe

(2019), Vol. 748, pp. 30-37, Materials science and engineering: A, Amsterdam, The Netherlands, C1

journal article

Selective laser melting of a high strength Al-Mn-Sc alloy: alloy design and strengthening mechanisms

Q Jia, P Rometsch, P Krnsteiner, Q Chao, A Huang, M Weyland, L Bourgeois, X Wu

(2019), Vol. 171, pp. 108-118, Acta materialia, Amsterdam, The Netherlands, C1

journal article

One-step quenching and partitioning treatment of a tailor welded blank of boron and TRIP steels for automotive applications

H Kong, Q Chao, B Rolfe, H Beladi

(2019), Vol. 174, pp. 1-10, Materials and design, Amsterdam, The Netherlands, C1

journal article

Abrasive wear resistance of ferrous microstructures with similar bulk hardness levels evaluated by a scratch-tester method

B Narayanaswamy, A Ghaderi, P Hodgson, P Cizek, Q Chao, M Safi, H Beladi

(2019), Vol. 50, pp. 4839-4850, Metallurgical and materials transactions A, New York, N.Y., C1

journal article
2018

Microstructure evolution and mechanical behavior of a CMnSiAl TRIP steel subjected to partial austenitization along with quenching and partitioning treatment

H Kong, Q Chao, M Cai, E Pavlina, B Rolfe, P Hodgson, H Beladi

(2018), Vol. 49, pp. 1509-1519, Metallurgical and materials transactions A: physical metallurgy and materials science, New York, N.Y., C1

journal article

Correlation of the maximum shear stress with micro-mechanisms of ductile fracture for metals with high strength-to-weight ratio

Y Lou, J Yoon, H Huh, Q Chao, J Song

(2018), Vol. 146-147, pp. 583-601, International journal of mechanical sciences, Amsterdam, The Netherlands, C1

journal article

Analysing single twinning events in Mg-6Zn using nanoindentation

T Guo, Q Chao, F Siska, J Cheng, R Varma, M Barnett

(2018), Vol. 768, pp. 510-516, Journal of alloys and compounds, Amsterdam, The Netherlands, C1

journal article
2017

Thermal stability of an ultrafine grained Ti-6Al-4V alloy during post-deformation annealing

Q Chao, P Hodgson, H Beladi

(2017), Vol. 694, pp. 13-23, Materials science and engineering a, Amsterdam, The Netherlands, C1

journal article

On the enhanced corrosion resistance of a selective laser melted austenitic stainless steel

Q Chao, V Cruz, S Thomas, N Birbilis, P Collins, A Taylor, P Hodgson, D Fabijanic

(2017), Vol. 141, pp. 94-98, Scripta materialia, Amsterdam, The Netherlands, C1

journal article

One-step quenching and partitioning treatment of a commercial low silicon boron steel

H Kong, Q Chao, M Cai, E Pavlina, B Rolfe, P Hodgson, H Beladi

(2017), Vol. 707, pp. 538-547, Materials science and engineering A, Amsterdam, The Netherlands, C1

journal article

Direct laser deposition cladding of AlxCoCrFeNi high entropy alloys on a high-temperature stainless steel

Q Chao, T Guo, T Jarvis, X Wu, P Hodgson, D Fabijanic

(2017), Vol. 332, pp. 440-451, Surface and coatings technology, Amsterdam, The Netherlands, C1

journal article
2016

Microstructure and texture evolution during symmetric and asymmetric rolling of a martensitic Ti-6Al-4V alloy

Q Chao, P Hodgson, H Beladi

(2016), Vol. 47, pp. 531-545, Metallurgical and materials transactions A : physical metallurgy and materials science, New York, N.Y., C1

journal article

Enhanced mechanical response of an ultrafine grained Ti-6Al-4V alloy produced through warm symmetric and asymmetric rolling

Q Chao, P Cizek, J Wang, P Hodgson, H Beladi

(2016), Vol. 650, pp. 404-413, Materials science and engineering a, Amsterdam, The Netherlands, C1

journal article

Dependence of deformation behavior on grain size and strain rate in an ultrahigh strength-ductile Mn-based TRIP alloy

M Cai, W Zhu, N Stanford, L Pan, Q Chao, P Hodgson

(2016), Vol. 653, pp. 35-42, Materials science and engineering A, Amsterdam, The Netherlands, C1

journal article
2014

Ultrafine grain formation in a Ti-6Al-4V alloy by thermomechanical processing of a martensitic microstructure

Q Chao, P Hodgson, H Beladi

(2014), Vol. 45, pp. 2659-2671, Metallurgical and materials transactions a: physical metallurgy and materials science, New York, N.Y., C1

journal article

Deformation behaviour of a commercial pure titanium alloy during hot compression testing

Q Chao, H Beladi, I Sabirov, P Hodgson

(2014), Vol. 773-774, pp. 281-286, Materials Science Forum, Stafa-Zurich, Switzerland, C1

journal article

A Novel Mo and Nb Microalloyed Medium Mn TRIP Steel with Maximal Ultimate Strength and Moderate Ductility

M Cai, Z Li, Q Chao, P Hodgson

(2014), Vol. 45, pp. 5624-5634, Metallurgical and materials transactions A: Physical metallurgy and materials science, New York, NY, C1

journal article

Microstructure evolution of martensitic Ti-6Al-4V alloy during warm deformation

Q Chao, P Hodgson, H Beladi

(2014), Vol. 783-786, pp. 679-684, Materials Science Forum, Stafa-Zurich, Switzerland, C1

journal article

Variant selection and intervariant crystallographic planes distribution in martensite in a Ti-6Al-4V alloy

H Beladi, Q Chao, G Rohrer

(2014), Vol. 80, pp. 478-489, Acta Materialia, C1

journal article
2013

Gradient ultrafine ferrite and martensite structure and its tensile properties by asymmetric rolling in low carbon microalloyed steel

M Cai, S Singh Dhinwal, Q Han, Q Chao, P Hodgson

(2013), Vol. 583, pp. 205-209, Materials Science and Engineering A, C1

journal article
2009

Dynamic mechanical behavior of a Zr-based bulk metallic glass during glass transition and crystallization

Qi Chao, Qing Wang, Yuanda Dong

(2009), Vol. 28, pp. 72-76, Rare Metals, [Beijing, China], C1-1

journal article

Funded Projects at Deakin

No Funded Projects at Deakin found

Supervisions

No completed student supervisions to report