Prof Rosanne Guijt

STAFF PROFILE

Position

Professor of Smart Sensors

Faculty

Faculty of Sci Eng & Built Env

Department

Centre for Reg & Rural Futures

Campus

Geelong Waurn Ponds Campus

Contact

rosanne.guijt@deakin.edu.au
+61 3 522 72531

Publications

Filter by

2023

3D Printing Functionally Graded Porous Materials for Simultaneous Fabrication of Dense and Porous Structures in Membrane-Integrated Fluidic Devices

Hari Balakrishnan, Ludovic Dumee, Andrea Merenda, Cyril Aubry, Dan Yuan, Egan Doeven, Rosanne Guijt

(2023), Vol. 4, pp. 1-11, Small structures, London, Eng,, C1

journal article

Recent developments in digital light processing 3D-printing techniques for microfluidic analytical devices

A Amini, R Guijt, T Themelis, J De Vos, S Eeltink

(2023), Vol. 1692, pp. 463842-463842, Journal of Chromatography A, Netherlands, C1

journal article

Closed-loop Control Systems for Pumps used in Portable Analytical Systems

Suleman Naz, Van Huynh, Egan Doeven, Scott Adams, Abbas Kouzani, Rosanne Guijt

(2023), Vol. 1695, pp. 1-19, Journal of Chromatography A, Amsterdam, The Netherlands, C1

journal article

3D printed integrated nanoporous membranes for electroextraction of DNA

Hari Kalathil Balakrishnan, Soo Lee, Ludovic Dumée, Egan Doeven, Richard Alexander, Dan Yuan, Rosanne Guijt

(2023), Vol. 15, pp. 10371-10382, Nanoscale, Cambridge, Eng., C1

journal article

Development of a pumpless acoustofluidic device for rapid food pathogen detection

A Nilghaz, S Lee, H Su, D Yuan, J Tian, R Guijt, X Wang

(2023), Vol. 1275, Analytica Chimica Acta, Netherlands, C1

journal article

Abridged solid-phase extraction with alkaline Poly(ethylene) glycol lysis (ASAP) for direct DNA amplification

Soo Lee, Yi Nai, Egan Doeven, Hari Balakrishnan, Dan Yuan, Rosanne Guijt

(2023), Vol. 266, pp. 1-8, Talanta, Amsterdam, The Netherlands, C1

journal article

Chemical Trends in Sample Preparation for Nucleic Acid Amplification Testing (NAAT): A Review

S Lee, H Balakrishnan, E Doeven, D Yuan, R Guijt

(2023), Vol. 13, pp. 980-980, Biosensors, Switzerland, C1

journal article

3D Printed Porous Membrane Integrated Devices to Study the Chemoattractant Induced Behavioural Response of Aquatic Organisms

Hari Kalathil Balakrishnan, Aaron Schultz, Soomin Lee, Richard Alexander, Ludovic Dumee, Egan Doeven, Dan Yuan, Rosanne Guijt

(2023), pp. 1-12, Lab on a Chip, Cambridge, Eng., C1

journal article
2022

Cross-linked boron nitride-piperazine amide thin film nanocomposite membranes for rejection and concentration of per- and poly-fluoroalkyl substances (PFAS)

S Abdikheibari, K Baskaran, R Guijt, W Lei, L Dumée

(2022), Vol. 31, pp. 425-432, Environmental Quality Management, C1

journal article

Inexpensive portable capillary electrophoresis instrument for Monitoring Zinc(II) in remote areas

M Zhang, P Smejkal, N Bester, J Robertson, M Atia, A Townsend, R Guijt, M Breadmore

(2022), Vol. 1668, pp. 1-11, Journal of Chromatography A, Amsterdam, The Netherlands, C1

journal article

An improved nucleic acid sequence-based amplification method mediated by T4 gene 32 protein

Y Nai, E Doeven, R Guijt

(2022), Vol. 17, pp. 1-9, PLoS ONE, San Francisco, Calif., C1

journal article

Novel Boundary Lubrication Mechanisms from Molecular Pillows of Lubricin Brush-Coated Graphene Oxide Nanosheets

M Russo, M Han, N Menon, A Quigley, R Kapsa, S Moulton, R Guijt, S Silva, T Schmidt, G Greene

(2022), Vol. 38, pp. 5351-5360, Langmuir, Washington, D.C., C1

journal article
2021

Amplification-free electrochemiluminescence molecular beacon-based microRNA sensing using a mobile phone for detection

E Kerr, R Farr, E Doeven, Y Nai, R Alexander, R Guijt, B Prieto-Simon, P Francis, M Dearnley, D Hayne, L Henderson, N Voelcker

(2021), Vol. 330, Sensors and Actuators, B: Chemical, C1

journal article

Scalable 3D printing method for the manufacture of single-material fluidic devices with integrated filter for point of collection colourimetric analysis

S Keshan Balavandy, F Li, N Macdonald, F Maya, A Townsend, K Frederick, R Guijt, M Breadmore

(2021), Vol. 1151, Analytica Chimica Acta, Netherlands, C1

journal article

A Comparison of Commercially Available Screen-Printed Electrodes for Electrogenerated Chemiluminescence Applications

E Kerr, R Alexander, P Francis, R Guijt, G Barbante, E Doeven

(2021), Vol. 8, Frontiers in Chemistry, Switzerland, C1

journal article

Antifouling Strategies for Electrochemical Biosensing: Mechanisms and Performance toward Point of Care Based Diagnostic Applications

M Russo, M Han, P Desroches, C Manasa, J Dennaoui, A Quigley, R Kapsa, S Moulton, R Guijt, G Greene, S Silva

(2021), Vol. 6, pp. 1482-1507, ACS Sensors, United States, C1

journal article

Growth of diamond coating on carbon fiber: Relationship between fiber microstructure and stability in hydrogen plasma

J Orwa, J Reiner, A Juma, A Stacey, K Sears, J Schütz, A Merenda, L Hyde, R Guijt, V Adineh, Q Li, M Naebe, A Kouzani, L Dumée

(2021), Vol. 115, Diamond and Related Materials, C1

journal article

Hyphenated sample preparation-electrospray and nano-electrospray ionization mass spectrometry for biofluid analysis

I Mikhail, M Tehranirokh, A Gooley, R Guijt, M Breadmore

(2021), Vol. 1646, Journal of Chromatography A, Netherlands, C1

journal article

3D printing for the integration of porous materials into miniaturised fluidic devices: A review

H Balakrishnan, E Doeven, A Merenda, L Dumée, R Guijt

(2021), Vol. 1185, Analytica Chimica Acta, Netherlands, C1

journal article

Perspective - what constitutes a quality analytical paper: Microfluidics and Flow analysis

S Lee, H Balakrishnan, D Yuan, Y Nai, R Guijt

(2021), Vol. 4, pp. 1-5, Talanta, Amsterdam, The Netherlands, C1

journal article

Sheathless Separation of CyanobacterialAnabaenaby Shape Using Viscoelastic Microfluidics

D Yuan, S Yan, J Zhang, R Guijt, Q Zhao, W Li

(2021), Vol. 93, pp. 12648-12654, Analytical Chemistry, Washington, D.C., C1

journal article

Facile fabrication of micro-/nanostructured, superhydrophobic membranes with adjustable porosity by 3D printing

Fadoua Mayoussi, Egan Doeven, Andrea Kick, Andreas Goralczyk, Yi Thomann, Patrick Risch, Rosanne Guijt, Frederik Kotz, Dorothea Helmer, Bastian Rapp

(2021), Vol. 9, pp. 21379-21386, Journal of Materials Chemistry A, Cambridge, Eng., C1

journal article

Blood apheresis technologies-a critical review on challenges towards efficient blood separation and treatment

C Bacal, J Maina, H Nandurkar, M Khaleel, R Guijt, Y Chang, K Dwyer, L Dumée

(2021), Vol. 2, pp. 7210-7236, Materials Advances, C1

journal article

Noble-Metal Nanoparticle-Based Colorimetric Diagnostic Assays for Point-of-Need Applications

A Nilghaz, S Mousavi, J Tian, R Cao, R Guijt, X Wang

(2021), Vol. 4, pp. 12808-12824, ACS Applied Nano Materials, C1

journal article
2020

One step multi-material 3D printing for the fabrication of a photometric detector flow cell

F Cecil, R Guijt, A Henderson, M Macka, M Breadmore

(2020), Vol. 1097, pp. 127-134, Analytica chimica acta, Amsterdam, The Netherlands, C1

journal article

Lubricin (PRG4) reduces fouling susceptibility and improves sensitivity of carbon-based electrodes

M Russo, M Han, A Quigley, R Kapsa, S Moulton, E Doeven, R Guijt, S Silva, G Greene

(2020), Vol. 333, Electrochimica Acta, C1

journal article

A Simple Electrochemical Swab Assay for the Rapid Quantification of Clonazepam in Unprocessed Saliva Enabled by Lubricin Antifouling Coatings

M Russo, A Quigley, R Kapsa, S Moulton, R Guijt, S Silva, G Greene

(2020), Vol. 7, pp. 2851-2858, ChemElectroChem, C1

journal article

The influence of electrolyte concentration on nanofractures fabricated in a 3D-printed microfluidic device by controlled dielectric breakdown

M Islam, Y Yap, F Li, R Guijt, M Breadmore

(2020), Vol. 41, pp. 2007-2014, Electrophoresis, London, Eng., C1

journal article

In-Syringe Electrokinetic Protein Removal from Biological Samples prior to Electrospray Ionization Mass Spectrometry

I Mikhail, M Tehranirokh, A Gooley, R Guijt, M Breadmore

(2020), Vol. 59, pp. 23162-23168, Angewandte Chemie - International Edition, London, Eng., C1

journal article

Rapid Additive Manufacturing of 3D Geometric Structures via Dual-Wavelength Polymerization

F Li, S Thickett, F Maya, E Doeven, R Guijt, M Breadmore

(2020), Vol. 9, pp. 1409-1414, ACS Macro Letters, United States, C1

journal article

A review on the sources, occurrence and health risks of per-/poly-fluoroalkyl substances (PFAS) arising from the manufacture and disposal of electric and electronic products

S Garg, P Kumar, V Mishra, R Guijt, P Singh, L Dumée, R Sharma

(2020), Vol. 38, Journal of Water Process Engineering, C1

journal article
2019

Increasing the functionalities of 3D printed microchemical devices by single material, multimaterial, and print-pause-print 3D printing

Feng Li, Niall Macdonald, Rosanne Guijt, Michael Breadmore

(2019), Vol. 19, pp. 35-49, Lab on a chip, Cambridge, Eng., C1

journal article

Multimaterial 3D Printed Fluidic Device for Measuring Pharmaceuticals in Biological Fluids

F Li, N MacDonald, R Guijt, M Breadmore

(2019), Vol. 91, pp. 1758-1763, Analytical Chemistry, United States, C1

journal article

In-Transit Electroextraction of Small-Molecule Pharmaceuticals from Blood

P Nanthasurasak, H See, M Zhang, R Guijt, M Breadmore

(2019), Vol. 58, pp. 3790-3794, Angewandte Chemie International Edition, Weinheim, Germany, C1

journal article

In-syringe electrokinetic ampholytes focusing coupled with electrospray ionization mass spectrometry

I Mikhail, M Tehranirokh, A Gooley, R Guijt, M Breadmore

(2019), Vol. 91, pp. 8259-8266, Analytical chemistry, Washington, D.C., C1

journal article

Colour tuning and enhancement of gel-based electrochemiluminescence devices utilising Ru(ii) and Ir(iii) complexes

L Soulsby, E Doeven, T Pham, D Eyckens, L Henderson, B Long, R Guijt, P Francis

(2019), Vol. 55, pp. 11474-11477, Chemical Communications, England, C1

journal article
2018

Academic parenting: work-family conflict and strategies across child age, disciplines and career level

A Hardy, J McDonald, R Guijt, E Leane, A Martin, A James, M Jones, M Corban, B Green

(2018), Vol. 43, pp. 625-643, Studies in higher education, Abingdon, Eng., C1-1

journal article

Recent trends in capillary and micro-chip electrophoretic instrumentation for field-analysis

M Zhang, S Phung, P Smejkal, R Guijt, M Breadmore

(2018), Vol. 18, pp. 1-10, Trends in Environmental Analytical Chemistry, C1

journal article

Miniaturised total chemical-analysis systems (ΜTAS) that periodically convert chemical into electronic information

R Guijt, A Manz

(2018), Vol. 273, pp. 1334-1345, Sensors and Actuators, B: Chemical, C1

journal article
2017

Microfluidic device for studying traumatic brain injury

Y Yap, T Dickson, A King, M Breadmore, R Guijt

(2017), Vol. 126, pp. 145-156, Stem cell technologies in neuroscience, Berlin, Germany, B1-1

book chapter

Time-resolved pharmacological studies using automated, on-line monitoring of five parallel suspension cultures

A Alhusban, M Breadmore, N Gueven, R Guijt

(2017), Vol. 7, Scientific Reports, England, C1

journal article

Using Printing Orientation for Tuning Fluidic Behavior in Microfluidic Chips Made by Fused Deposition Modeling 3D Printing

F Li, N Macdonald, R Guijt, M Breadmore

(2017), Vol. 89, pp. 12805-12811, Analytical Chemistry, United States, C1

journal article

Van de Graaff generator for capillary electrophoresis

S Lee, E Castro, R Guijt, M Tarn, A Manz

(2017), Vol. 1517, pp. 195-202, Journal of Chromatography A, Netherlands, C1

journal article

Electrophoretic separations on paper: past, present, and future-a review

Pavisara Nanthasurasak, Joan Cabot, Hong See, Rosanne Guijt, Michael Breadmore

(2017), Vol. 985, pp. 7-23, Analytica chimica acta, Amsterdam, The Netherlands, C1-1

journal article

Isotachophoretic fluorescence in situ hybridization of intact bacterial cells

Sui Phung, Joan Cabot, Mirek Macka, Shane Powell, Rosanne Guijt, Michael Breadmore

(2017), Vol. 89, pp. 6513-6520, Analytical chemistry, Washington, D.C., C1-1

journal article

One-Step Fabrication of a Microfluidic Device with an Integrated Membrane and Embedded Reagents by Multimaterial 3D Printing

Feng Li, Petr Smejkal, Niall Macdonald, Rosanne Guijt, Michael Breadmore

(2017), Vol. 89, pp. 4701-4707, Analytical Chemistry, Washington, D.C., C1-1

journal article

Comparing microfluidic performance of three-dimensional (3D) printing platforms

Niall Macdonald, Joan Cabot, Petr Smejkal, Rosanne Guijt, Brett Paull, Michael Breadmore

(2017), Vol. 89, pp. 3858-3866, Analytical Chemistry, Washington, D.C., C1-1

journal article

Mild and repetitive very mild axonal stretch injury triggers cystoskeletal mislocalization and growth cone collapse

Y Yap, A King, R Guijt, T Jiang, C Blizzard, M Breadmore, T Dickson

(2017), Vol. 12, PLoS ONE, United States, C1-1

journal article

3D printed LED based on-capillary detector housing with integrated slit

Farhan Cecil, Min Zhang, Rosanne Guijt, Alan Henderson, Pavel Nesterenko, Brett Paull, Michael Breadmore, Mirek Macka

(2017), Vol. 965, pp. 131-136, Analytica Chimica Acta, Amsterdam, The Netherlands, C1-1

journal article

The role of gratitude in enhancing the relationship between doctoral research students and their supervisors

K Howells, K Stafford, R Guijt, M Breadmore

(2017), Vol. 22, pp. 621-638, Teaching in Higher Education, London, Eng., C1-1

journal article
2016

Lab on a chip for point-of-care analysis of drugs in body fluids

F Li, R Guijt, M Breadmore

(2016), pp. 421-442, Nanobiosensors for personalized and onsite biomedical diagnosis, Stevenage, Eng., B1-1

book chapter

Capillary electrophoresis: basic principles

A Shallan, R Guijt, M Breadmore

(2016), pp. 57-68, Materials analysis in forensic science, London, Eng., B1-1

book chapter

Capillary electrophoresis for automated on-line monitoring of suspension cultures: correlating cell density, nutrients and metabolites in near real-time

A Alhusban, M Breadmore, N Gueven, R Guijt

(2016), Vol. 920, pp. 94-101, Analytica chimica acta, Amsterdam, The Netherlands, C1-1

journal article

3D printed microfluidic devices: Enablers and barriers

S Waheed, J Cabot, N Macdonald, T Lewis, R Guijt, B Paull, M Breadmore

(2016), Vol. 16, pp. 1993-2013, Lab on a Chip, England, C1-1

journal article

Potassium retention in leaf mesophyll as an element of salinity tissue tolerance in halophytes

William Percey, Lana Shabala, Qi Wu, Nana Su, Michael Breadmore, Rosanne Guijt, Jayakumar Bose, Sergey Shabala

(2016), Vol. 109, pp. 346-354, Plant physiology and biochemistry, Amsterdam, The Netherlands, C1-1

journal article

Salinity effects on chloroplast PSII performance in glycophytes and halophytes1

W Percey, A McMinn, J Bose, M Breadmore, R Guijt, S Shabala

(2016), Vol. 43, pp. 1003-1015, Functional plant biology, Clayton, Vic., C1-1

journal article

Nanoporous membranes for microfluidic concentration prior to electrophoretic separation of proteins in urine

F Li, R Guijt, M Breadmore

(2016), Vol. 88, pp. 8257-8263, Analytical Chemistry, United States, C1-1

journal article

Plant leaves as templates for soft lithography

W Wu, R Guijt, Y Silina, M Koch, A Manz

(2016), Vol. 6, pp. 22469-22475, RSC Advances, C1-1

journal article

Direct electrokinetic injection of inorganic cations from whole fruits and vegetables for capillary electrophoresis analysis

Umme Kalsoom, Rosanne Guijt, Mary Boyce, Ashley Townsend, Rob Haselberg, Michael Breadmore

(2016), Vol. 1428, pp. 346-351, Journal of chromatography A, Amsterdam, The Netherlands, C1-1

journal article
2015

Counter-pressure-assisted ITP with electrokinetic injection under field-amplified conditions for bacterial analysis

S Phung, Y Nai, M Macka, S Powell, R Guijt, M Breadmore

(2015), Vol. 407, pp. 6995-7002, Analytical and bioanalytical chemistry, Berlin, Germany, C1

journal article

Direct coupling of a free-flow isotachophoresis (FFITP) device with electrospray ionization mass spectrometry (ESI-MS)

J Park, C Campos, P Neužil, L Abelmann, R Guijt, A Manz

(2015), Vol. 15, pp. 3495-3502, Lab on a chip, Cambridge, Eng., C1-1

journal article

Electrokinetic size and mobility traps for on-site therapeutic drug monitoring

Aliaa Shallan, Rosanne Guijt, Michael Breadmore

(2015), Vol. 54, pp. 7359-7362, Angewandte chemie international edition, Berlin, Germany, C1-1

journal article

Flow injection analysis of organic peroxide explosives using acid degradation and chemiluminescent detection of released hydrogen peroxide

Parvez Mahbub, Philip Zakaria, Rosanne Guijt, Mirek Macka, Greg Dicinoski, Michael Breadmore, Pavel Nesterenko

(2015), Vol. 143, pp. 191-197, Talanta, Amsterdam, The Netherlands, C1-1

journal article

Micellar electrokinetic chromatography of organic and peroxide-based explosives

Cameron Johns, Joseph Hutchinson, Rosanne Guijt, Emily Hilder, Paul Haddad, Mirek Macka, Pavel Nesterenko, Adam Gaudry, Greg Dicinoski, Michael Breadmore

(2015), Vol. 876, pp. 91-97, Analytica chimica acta, Amsterdam, The Netherlands, C1-1

journal article

Wall-less stationary ph boundary for stacking proteins on a glass microchip

H See, R Guijt, M Breadmore

(2015), pp. 1969-1971, MicroTAS 2015 - Proceedings of the 19th International Conference on Miniaturized Systems for Chemistry and Life Sciences, Seoul, Korea, E1-1

conference

Nanofluidic trap for DNA extraction from biological samples

A Shallan, R Guijt, M Breadmore

(2015), pp. 1963-1965, MicroTAS 2015 - Proceedings of the 19th International Conference on Miniaturized Systems for Chemistry and Life Sciences, Seoul, Korea, E1-1

conference

Online connection of free-flow isotachophoresis chip to an electrospray ionization mass-spectrometer

J Park, A Manz, R Guijt

(2015), pp. 1954-1956, MicroTAS 2015 - Proceedings of the 19th International Conference on Miniaturized Systems for Chemistry and Life Sciences, Seoul, Korea, E1-1

conference

Online connection of free-flow isotachophoresis chip to an electrospray ionization mass-spectrometer

Jukyung Park, Rosanne Guijt, Andreas Manz

(2015), pp. 78-81, CECE 2015: Proceedings of the 12th International Interdisciplinary Meeting on Bioanalysis, Brno, Czech Republic, E1-1

conference
2014

Ion transport in broad bean leaf mesophyll under saline conditions

W Percey, L Shabala, M Breadmore, R Guijt, J Bose, S Shabala

(2014), Vol. 240, pp. 729-743, Planta, Berlin, Germany, C1-1

journal article

Cost-effective three-dimensional printing of visibly transparent microchips within minutes

A Shallan, P Smejkal, M Corban, R Guijt, M Breadmore

(2014), Vol. 86, pp. 3124-3130, Analytical chemistry, Washington, D.C., C1-1

journal article

Capillary electrophoresis for the analysis of paralytic shellfish poisoning toxins in shellfish: comparison of detection methods

A Keyon, R Guijt, A Gaspar, A Kazarian, P Nesterenko, C Bolch, M Breadmore

(2014), Vol. 35, pp. 1496-1503, Electrophoresis, Weinheim, Germany, C1-1

journal article

On-line sequential injection-capillary electrophoresis for near-real-time monitoring of extracellular lactate in cell culture flasks

A Alhusban, A Gaudry, M Breadmore, N Gueven, R Guijt

(2014), Vol. 1323, pp. 157-162, Journal of chromatography A, Amsterdam, The Netherlands, C1-1

journal article

Electrokinetics for sample preparation of biological molecules in biological samples using microfluidic systems

A Shallan, R Guijt, M Breadmore

(2014), Vol. 6, pp. 1961-1974, Bioanalysis, London, United Kingdom, C1-1

journal article

Polymeric microchip for the simultaneous determination of anions and cations by hydrodynamic injection using a dual-channel sequential injection microchip electrophoresis system

Adam Gaudry, Yi Nai, Rosanne Guijt, Michael Breadmore

(2014), Vol. 86, pp. 3380-3388, Analytical chemistry, Washington, D.C., C1-1

journal article

Droplet microfluidics for postcolumn reactions in capillary electrophoresis

Aemi Abdul Keyon, Rosanne Guijt, Christopher Bolch, Michael Breadmore

(2014), Vol. 86, pp. 11811-11818, Analytical chemistry, Washington, D.C., C1-1

journal article

Transient isotachophoresis-capillary zone electrophoresis with contactless conductivity and ultraviolet detection for the analysis of paralytic shellfish toxins in mussel samples

Aemi Abdul Keyon, Rosanne Guijt, Christopher Bolch, Michael Breadmore

(2014), Vol. 1364, pp. 295-302, Journal of chromatography a, Amsterdam, The Netherlands, C1-1

journal article

Evaluation of potential cationic probes for the detection of proline and betaine

Umme Kalsoom, Michael Breadmore, Rosanne Guijt, Mary Boyce

(2014), Vol. 35, pp. 3379-3386, Electrophoresis, Weinheim, Germany, C1-1

journal article

Microfluidic culture platform for studying neuronal response to mild to very mild axonal stretch injury

Y Yap, T Dickson, A King, M Breadmore, R Guijt

(2014), Vol. 8, Biomicrofluidics, Melville, N.Y., C1-1

journal article
2013

Microfluidic devices for the analysis of drugs and their metabolites in biological fluids

A Shallan, R Guijt, M Breadmore

(2013), pp. 73-98, Microfluidics, nanotechnology and disease biomarkers for personalized medicine applications, Hauppage, N.Y., B1-1

book chapter

Microfluidic isotachophoresis: a review

P Smejkal, D Bottenus, M Breadmore, R Guijt, C Ivory, F Foret, M Macka

(2013), Vol. 34, pp. 1493-1509, Electrophoresis, London, Eng., C1-1

journal article

Capillary electrophoresis for monitoring bioprocesses

A Alhusban, M Breadmore, R Guijt

(2013), Vol. 34, pp. 1465-1482, Electrophoresis, London, Eng., C1-1

journal article

On-line simultaneous and rapid separation of anions and cations from a single sample using dual-capillary sequential injection-capillary electrophoresis

A Gaudry, R Guijt, M Macka, J Hutchinson, C Johns, E Hilder, G Dicinoski, P Nesterenko, P Haddad, M Breadmore

(2013), Vol. 781, pp. 80-87, Analytica Chimica Acta, Netherlands, C1-1

journal article

Exploring chip-capillary electrophoresis-laser-induced fluorescence field-deployable platform flexibility: separations of fluorescent dyes by chip-based non-aqueous capillary electrophoresis

N Nuchtavorn, P Smejkal, M Breadmore, R Guijt, P Doble, F Bek, F Foret, L Suntornsuk, M Macka

(2013), Vol. 1286, pp. 216-221, Journal of chromatography a, Amsterdam, The Netherlands, C1-1

journal article

Tuneable nanochannel formation for sample-in/answer-out devices

A Shallan, A Gaudry, R Guijt, M Breadmore

(2013), Vol. 49, pp. 2816-2818, Chemical communications, Cambridge, United Kingdom, C1-1

journal article

Analytical isotachophoresis of lactate in human serum using dry film photoresist microfluidic chips compatible with a commercially available field-deployable instrument platform

P Smejkal, M Breadmore, R Guijt, F Foret, F Bek, M Macka

(2013), Vol. 803, pp. 135-142, Analytica chimica acta, Amsterdam, The Netherlands, C1-1

journal article

Stainless steel pinholes for fast fabrication of high-performance microchip electrophoresis devices by CO 2 laser ablation

Y Yap, R Guijt, T Dickson, A King, M Breadmore

(2013), Vol. 85, pp. 10051-10056, Analytical chemistry, Washington, United States, C1-1

journal article

Porous layer open tubular monolith capillary column: switching-off the reaction kinetics as the governing factor in their preparation by using an immiscible liquid-controlled polymerization

R Knob, M Breadmore, R Guijt, J Petr, M Macka

(2013), Vol. 3, pp. 24927-24930, RSC advances, Cambridge, Eng., C1-1

journal article

In-plane alloy electrodes for capacitively coupled contactless conductivity detection in poly(methylmethacrylate) electrophoretic chips

Adam Gaudry, Michael Breadmore, Rosanne Guijt

(2013), Vol. 34, pp. 2980-2987, Electrophoresis, Weinheim, Germany, C1-1

journal article

Hydrodynamic control for non-biased injection and simultaneous complementary analysis

A Gaudry, M Breadmore, R Guijt

(2013), Vol. 3, pp. 1857-1859, µTAS 2013 : Proceedings of the 17th International Conference on Miniaturized Systems for Chemistry and Life Sciences, Freiburg, Germany, E1-1

conference
2012

Separation of carboxylic acids in human serum by isotachophoresis using a commercial field-deployable analytical platform combined with in-house glass microfluidic chips

P Smejkal, M Breadmore, R Guijt, J Grym, F Foret, F Bek, M Macka

(2012), Vol. 755, pp. 115-120, Analytica chimica acta, Amsterdam, The Netherlands, C1-1

journal article

Isotachophoresis on a chip with indirect fluorescence detection as a field deployable system for analysis of carboxylic acids

P Smejkal, M Breadmore, R Guijt, F Foret, F Bek, M Macka

(2012), Vol. 33, pp. 3166-3172, Electrophoresis, London, Eng., C1-1

journal article

Electric field gradient focusing using a variable width polyaniline electrode

C Trickett, R Henderson, R Guijt, M Breadmore

(2012), Vol. 33, pp. 3254-3258, Electrophoresis, London, Eng., C1-1

journal article

Lab-on-a-chip device with laser-patterned polymer electrodes for high voltage application and contactless conductivity detection

R Henderson, R Guijt, L Andrewartha, T Lewis, T Rodemann, A Henderson, E Hilder, P Haddad, M Breadmore

(2012), Vol. 48, pp. 9287-9289, Chemical communications, Cambridge, Eng., C1-1

journal article

CONTROL OF THE POLYMERIZATION TOWARDS POROUS LAYER OPEN TUBULAR CAPILLARY COLUMNS

Radim Knob, Michael Breadmore, Rosanne Guijt, Jan Petr, Mirek Macka

(2012), pp. 30-32, CECE 2012: 9TH INTERNATIONAL INTERDISCIPLINARY MEETING ON BIOANALYSIS, Brno, CZECH REPUBLIC, E1-1

conference
2011

Lab on a Chip - Future Technology for Characterizing Biotechnology Products

R Guijt

(2011), Vol. 2, pp. 753-764, Comprehensive Biotechnology, Amsterdam, Netherlands, B1-1

book chapter

Pressure-assisted electrokinetic supercharging for the enhancement of non-steroidal anti-inflammatory drugs

M Meighan, M Dawod, R Guijt, M Hayes, M Breadmore

(2011), Vol. 1218, pp. 6750-6755, Journal of chromatography A, Amsterdam, The Netherlands, C1-1

journal article

UV initiated formation of polymer monoliths in glass and polymer microreactors

J Deverell, T Rodemann, J Smith, A Canty, R Guijt

(2011), Vol. 155, pp. 388-396, Sensors and actuators B: chemical, Amsterdam, The Netherlands, C1-1

journal article

Dual wavelength excitation fluorescence detector for capillary electrophoresis using a pulsed bi-colour light emitting diode

F Huo, R Guijt, D Xiao, M Breadmore

(2011), Vol. 136, pp. 2234-2241, Analyst, [London, Eng.], C1-1

journal article

Microfluidic chips for capillary electrophoresis with integrated electrodes for capacitively coupled conductivity detection based on printed circuit board technology

R Guijt, J Armstrong, E Candish, V Lefleur, W Percey, S Shabala, P Hauser, M Breadmore

(2011), Vol. 159, pp. 307-313, Sensors and actuators B: chemical, Amsterdam, The Netherlands, C1-1

journal article
2007

Heat production and dissipation in capillary electrophoresis

Christopher Evenhuis, Rosanne Guijt, Miroslav Macka, Philip Marriott, Paul Haddad

(2007), pp. 545-562, Handbook of Capillary and Microchip Electrophoresis and Associated Microtechniques, Boca Raton, Fla., B1-1

book chapter

Identification of inorganic improvised explosive devices by analysis of postblast residues using portable capillary electrophoresis instrumentation and indirect photometric detection with a light-emitting diode

J Hutchinson, C Evenhuis, C Johns, A Kazarian, M Breadmore, M Macka, E Hilder, R Guijt, G Dicinoski, P Haddad

(2007), Vol. 79, pp. 7005-7013, Analytical chemistry, Washington, D.C., C1-1

journal article

Reliable electrophoretic mobilities free from Joule heating effects using CE

C Evenhuis, V Hruska, R Guijt, M Macka, B Gas, P Marriott, P Haddad

(2007), Vol. 28, pp. 3759-3766, Electrophoresis, Weinheim, Germany, C1-1

journal article
2006

Macroporous monolith supports for continuous flow capillary microreactors

K Bolton, A Canty, J Deverell, R Guijt, E Hilder, T Rodemann, J Smith

(2006), Vol. 47, pp. 9321-9324, Tetrahedron letters, Amsterdam, The Netherlands, C1-1

journal article

Variation of zeta-potential with temperature in fused-silica capillaries used for capillary electrophoresis

C Evenhuis, R Guijt, M Macka, P Marriott, P Haddad

(2006), Vol. 27, pp. 672-676, Electrophoresis, Chichester, Eng., C1-1

journal article

Temperature profiles and heat dissipation in capillary electrophoresis

C Evenhuis, R Guijt, M Macka, P Marriott, P Haddad

(2006), Vol. 78, pp. 2684-2693, Analytical chemistry, Washington, D.C., C1-1

journal article
2005

Internal electrolyte temperatures for polymer and fused-silica capillaries used in capillary electrophoresis

C Evenhuis, R Guijt, M Macka, P Marriott, P Haddad

(2005), Vol. 26, pp. 4333-4344, Electrophoresis, Chichester, Eng., C1-1

journal article
2004

Conductivity detection for conventional and miniaturised capillary electrophoresis systems

R Guijt, C Evenhuis, M Macka, P Haddad

(2004), Vol. 25, pp. 4032-4057, Electrophoresis, Weinheim, Germany, C1-1

journal article

Determination of inorganic ions using microfluidic devices

C Evenhuis, R Guijt, M Macka, P Haddad

(2004), Vol. 25, pp. 3602-3624, Electrophoresis, Weinheim, Germany, C1-1

journal article
2003

Miniaturized analytical assays in biotechnology

R Guijt-van Duijn, R Moerman, A Kroon, G van Dedem, R van den Doel, L van Vliet, I Young, F Laugere, A Bossche, P Sarro

(2003), Vol. 21, pp. 431-444, Biotechnology advances, Amsterdam, The Netherlands, C1-1

journal article

On-chip contactless four-electrode conductivity detection for capillary electrophoresis devices

F Laugere, R Guijt, J Bastemeijer, G van der Steen, A Berthold, E Baltussen, P Sarro, G van Dedem, M Vellekoop, A Bossche

(2003), Vol. 75, pp. 306-312, Analytical chemistry, Washington, D.C., C1-1

journal article

Chemical and physical processes for integrated temperature control in microfluidic devices

R Guijt, A Dodge, G van Dedem, N de Rooij, E Verpoorte

(2003), Vol. 3, pp. 1-4, Lab on a chip, Cambridge, Eng., C1-1

journal article
2002

Considerations on contactless conductivity detection in capillary electrophoresis

E Baltussen, R Guijt, G van der Steen, F Laugere, S Baltussen, G van Dedem

(2002), Vol. 23, pp. 2888-2893, Electrophoresis, Weinheim, Germany, C1-1

journal article

Fabrication of a glass-impolemented microcapillary electrophoresis device with integrated contactless conductivity detection

A Berthold, F Laugere, H Schellevis, C De Boer, M Laros, R Guijt, P Sarro, M Vellekoop

(2002), Vol. 23, pp. 3511-3519, Electrophoresis, Weinheim, Germany, C1-1

journal article

Use of bioaffinity interactions in electrokinetically controlled assays on microfabricated devices

R Guijt, E Baltussen, G van Dedem

(2002), Vol. 23, pp. 823-835, Electrophoresis, Weinheim, Germany, C1-1

journal article
2001

Measurement System for Biochemical Analysis Based on Capillary Electrophoresis and Microscale Conductivity Detection

F Laugere, A Berthold, R Guijt, E Baltussen, J Bastemeijer, P Sarro, M Vellekoop

(2001), pp. 1-6, Sensor Technology 2001, Berlin, Germany, B1-1

book chapter

Experimental verification of an improved method for conductivity detection in on-chip capillary electrophoresis systems

F Laugere, A Berthold, G Lubking, J Bastemeijer, R Guijt, E Baltussen, P Sarro, M Vellekoop

(2001), pp. 1150-1153, Transducers ’01 Eurosensors XV, Berlin, Germany, B1-1

book chapter

Capillary electrophoresis with on-chip four-electrode capacitively coupled conductivity detection for application in bioanalysis

R Guijt, E Baltussen, G van der Steen, H Frank, H Billiet, T Schalkhammer, F Laugere, M Vellekoop, A Berthold, L Sarro, G van Dedem

(2001), Vol. 22, pp. 2537-2541, Electrophoresis, Weinheim, Germany, C1-1

journal article
2000

Recent advances in affinity capillary electrophoresis

R Guijt, J Frank, G van Dedem, E Baltussen

(2000), Vol. 21, pp. 3905-3918, Electrophoresis, Chichester, Eng., C1-1

journal article

Funded Projects at Deakin

Other Public Sector Funding

Field deployable method for sensing fluorinated surfactants.

Prof Rosanne Guijt, Prof Abbas Kouzani, Dr Egan Doeven

Department of Industry, Innovation and Science

  • 2019: $50,000

3D printing Microfluidic devices.

Prof Rosanne Guijt, Mr Harikrishnan Kalathil Balakrishnan

International Education Resilience Fund

  • 2022: $12,000

Industry and Other Funding

Investigating the role of phenylacetic acid in the biosynthesis of scopolamine by commercial Duboisia species.

Prof Rosanne Guijt, Prof Xavier Conlan, Mr Lawrence Webb

Alkaloids of Australia

  • 2019: $20,500

Field deployable method for sensing fluorinated surfactants.

Prof Rosanne Guijt, Prof Abbas Kouzani, Dr Egan Doeven

The Remediation Group

  • 2019: $51,372

Development of Cost-effective Technologies for Remediation of Crude Oil Contamination in Desert Environments with a Special Reference to the Kuwaiti Oil Lake Areas

Prof Chu Xia Lin, Prof Rosanne Guijt

Kerrison Asia Pacific Limited

  • 2021: $300,000
  • 2020: $300,000
  • 2019: $300,000

Validating the anionic surfactant analyser for field samples.

Prof Rosanne Guijt, Prof Abbas Kouzani

The Remediation Group

  • 2021: $20,000

Ultra-High Resolution 3D Printing of Micron-Sized Structures and Voids

Prof Rosanne Guijt, Prof Michael Breadmore, Prof Weihua Li, A/Prof Muhammad J.A. Shiddiky, Dr Sara Baratchi, A/Prof Weiwei Lei, Dr Mohsen Sarafraz, Dr Dan Yuan, Prof Brett Paull, Dr Stuart Thickett, Dr Vipul Gupta, Prof Ronald Sluyter, Dr Navid Kashaninejad, Dr Jun Zhang, A/Prof Kiao Inthavong

Griffith University

  • 2023: $10,000

Other Funding Sources

Ultra-High Resolution 3D Printing of Micron-Sized Structures and Voids

Prof Rosanne Guijt, Prof Michael Breadmore, Prof Weihua Li, A/Prof Muhammad J.A. Shiddiky, Dr Sara Baratchi, A/Prof Weiwei Lei, Dr Mohsen Sarafraz, Dr Dan Yuan, Prof Brett Paull, Dr Stuart Thickett, Dr Vipul Gupta, Prof Ronald Sluyter, Dr Navid Kashaninejad, Dr Jun Zhang, A/Prof Kiao Inthavong

ARC LIEF - Linkage Infrastructure Equipment & Facilities Program, RMIT Royal Melbourne Institute of Technology, University of Wollongong

  • 2023: $385,792

Supervisions

Principal Supervisor
2023

Harikrishnan Kalathil Balakrishnan

Thesis entitled: 3D Printing of Nano Porous Membrane Integrated Miniaturized Fluidic Devices

Doctor of Philosophy (Life & Env), School of Life and Environmental Sciences

Associate Supervisor
2022

Matthew Russo

Thesis entitled: Lubricin (PRG4): A Versatile and Multifunctional Protein for Biomedical Applications

Doctor of Philosophy (Engineering), Institute for Frontier Materials