Dr Scott Adams

STAFF PROFILE

Position

Lecturer, Mechatronics

Faculty

Faculty of Sci Eng & Built Env

Department

School of Engineering

Campus

Geelong Waurn Ponds Campus

Contact

scott.adams@deakin.edu.au
+61 3 522 73772

Publications

Filter by

2024

SmartFSCV: An Artificial Intelligence Enabled Miniaturised FSCV Device Targeting Serotonin

D Corva, E Doeven, B Parke, S Adams, S Tye, P Hashemi, M Berk, A Kouzani

(2024), Vol. 5, pp. 75-85, IEEE Open Journal of Engineering in Medicine and Biology, Piscataway, N.J., C1

journal article

A 3D printed intracortical microprobe with automatic effective stiffness control

N Sharafkhani, J Long, S Adams, A Kouzani

(2024), Vol. 38, pp. 1-10, Bioprinting, Amsterdam, The Netherlands, C1

journal article

A self-stiffening compliant intracortical microprobe

Naser Sharafkhani, John Long, Scott Adams, Abbas Kouzani

(2024), Vol. 26, pp. 17-, Biomedical Microdevices, United States, C1

journal article

Delamination Techniques of Waste Solar Panels: A Review

Ali Ghahremani, Scott Adams, Michael Norton, Sui Khoo, Abbas Kouzani

(2024), Vol. 6, pp. 280-298, Clean Technologies, Basel, Switzerland, C1

journal article

SmartStim: An Artificial Intelligence Enabled Deep Brain Stimulation Device

D Corva, B Parke, A West, E Doeven, S Adams, S Tye, P Hashemi, M Berk, A Kouzani

(2024), pp. 1-11, IEEE Transactions on Medical Robotics and Bionics, Piscataway, N.J., C1

journal article

Volumetric additive manufacturing: A new frontier in layer-less 3D printing

D Whyte, E Doeven, A Sutti, A Kouzani, S Adams

(2024), Vol. 84, pp. 1-23, Additive Manufacturing, Amsterdam, The Netherlands, C1

journal article
2023

Self-Supervised Leaf Segmentation under Complex Lighting Conditions

Xufeng Lin, Chang-Tsun Li, Scott Adams, Abbas Kouzani, Richard Jiang, Ligang He, Yongjian Hu, Michael Vernon, Egan Doeven, Lawrence Webb, Todd Mcclellan, Adam Guskich

(2023), Vol. 135, pp. 1-14, Pattern Recognition, Amsterdam, The Netherlands, C1

journal article

Closed-loop Control Systems for Pumps used in Portable Analytical Systems

Suleman Naz, Van Huynh, Egan Doeven, Scott Adams, Abbas Kouzani, Rosanne Guijt

(2023), Vol. 1695, pp. 1-19, Journal of Chromatography A, Amsterdam, The Netherlands, C1

journal article

A Survey of Modern Greenhouse Technologies and Practices for Commercial Cannabis Cultivation

M Vernon, A Kouzani, L Webb, S Adams

(2023), Vol. 11, pp. 62077-62090, IEEE Access, C1

journal article

A binary stiffness compliant neural microprobe

N Sharafkhani, J Long, S Adams, A Kouzani

(2023), Vol. 363, pp. 1-14, Sensors and Actuators A: Physical, Amsterdam, The Netherlands, C1

journal article

Novel Neural Microprobe with Adjustable Stiffness

N Sharatfhani, J Long, S Adams, A Kouzani

(2023), Vol. 2023-April, International IEEE/EMBS Conference on Neural Engineering, NER, E1

conference
2022

Neural tissue-microelectrode interaction: Brain micromotion, electrical impedance, and flexible microelectrode insertion

Naser Sharafkhani, Abbas Kouzani, Scott Adams, John Long, Gaëlle Lissorgues, Lionel Rousseau, Julius Orwa

(2022), Vol. 365, pp. 1-20, Journal of Neuroscience Methods, Amsterdam, The Netherlands, C1

journal article

Advanced Design, Fabrication, and Applications of 3D-Printable Piezoelectric Nanogenerators

M Mahmud, P Adhikary, A Zolfagharian, S Adams, A Kaynak, A Kouzani

(2022), Vol. 18, pp. 129-144, Electronic Materials Letters, C1

journal article

Recent progress in hydrogel-based sensors and energy harvesters

S Hasan, A Kouzani, S Adams, J Long, M Mahmud

(2022), Vol. 335, pp. 1-23, Sensors and Actuators A: Physical, Amsterdam, The Netherlands, C1

journal article

A Pneumatic-Based Mechanism for Inserting a Flexible Microprobe Into the Brain

Naser Sharafkhani, Abbas Kouzani, Scott Adams, John Long, Julius Orwa

(2022), Vol. 89, pp. 1-10, Journal of Applied Mechanics, New York, N.Y., C1

journal article

Comparative study on the contact-separation mode triboelectric nanogenerator

Saima Hasan, Abbas Kouzani, Scott Adams, John Long, M Mahmud

(2022), Vol. 116, pp. 1-16, Journal of Electrostatics, Amsterdam, The Netherlands, C1

journal article

A Smart Camera Trap for Detection of Endotherms and Ectotherms

D Corva, N Semianiw, A Eichholtzer, S Adams, M Parvez Mahmud, K Gaur, A Pestell, D Driscoll, A Kouzani

(2022), Vol. 22, pp. 1-17, Sensors, Basel, Switzerland, C1

journal article

An Intracortical Polyimide Microprobe With Piezoelectric-Based Stiffness Control

N Sharafkhani, J Orwa, S Adams, J Long, G Lissorgues, L Rousseau, A Kouzani

(2022), Vol. 89, Journal of Applied Mechanics, Transactions ASME, C1

journal article

TinyStat: A Miniaturised Potentiostat for Portable Electrochemical Measurements

D Corva, S Adams, E Doeven, P Hashemi, A Kouzani

(2022), ICECS 2022 : Proceedings of the IEEE International Conference on Electronics, Circuits and Systems 2022, Glasgow, United Kingdom, E1

conference
2021

Comparative accuracy testing of non-contact infrared thermometers and temporal artery thermometers in an adult hospital setting

S Khan, B Saultry, S Adams, A Kouzani, K Decker, R Digby, T Bucknall

(2021), Vol. 49, pp. 597-602, American Journal of Infection Control, United States, C1

journal article

An FSCV Deep Neural Network: Development, Pruning, and Acceleration on an FPGA

Z Zhang, Y Oh, S Adams, K Bennet, A Kouzani

(2021), Vol. 25, pp. 2248-2259, IEEE Journal of Biomedical and Health Informatics, United States, C1

journal article

Fine-scale foraging effort and efficiency of Macaroni penguins is influenced by prey type, patch density and temporal dynamics

G Sutton, C Bost, A Kouzani, S Adams, K Mitchell, J Arnould

(2021), Vol. 168, Marine Biology, C1

journal article

Miniature FSCV Devices: A Review

D Corva, S Adams, K Bennet, M Berk, A Kouzani

(2021), Vol. 21, pp. 13006-13018, IEEE Sensors Journal, C1

journal article

An initial study on the agreement of body temperatures measured by infrared cameras and oral thermometry

S Adams, T Bucknall, A Kouzani

(2021), Vol. 11, Scientific Reports, England, C1

journal article

Variable-geometry exit nozzle for improving static thrust of drones ducted fans

D Corva, S Adams, A Kouzani

(2021), Vol. 38, pp. 1092-1103, Journal of Field Robotics, C1

journal article

An Investigation Into Miniaturised Closed-Loop DBS Devices

Dean Corva, Scott Adams, Kevin Bennet, Parastoo Hashemi, Michael Berk, Abbas Kouzani

(2021), Vol. 3, pp. 671-680, IEEE Transactions on Medical Robotics and Bionics, Piscataway, N.J., C1

journal article
2020

TinyFSCV: FSCV for the Masses

S Adams, E Doeven, S Tye, K Bennet, M Berk, A Kouzani

(2020), Vol. 28, pp. 133-142, IEEE Transactions on Neural Systems and Rehabilitation Engineering, Piscataway, N.J., C1

journal article

Multi-predator assemblages, dive type, bathymetry and sex influence foraging success and efficiency in African penguins

G Sutton, L Pichegru, J Botha, A Kouzani, S Adams, C Bost, J Arnould

(2020), Vol. 2020, PeerJ, United States, C1

journal article

Miniature resistance measurement device for structural health monitoring of reinforced concrete infrastructure

D Corva, S Hosseini, F Collins, S Adams, W Gates, A Kouzani

(2020), Vol. 20, pp. 1-18, Sensors (Switzerland), Switzerland, C1

journal article
2019

Development of a miniature device for emerging deep brain stimulation paradigms

S Adams, K Bennet, S Tye, M Berk, A Kouzani

(2019), Vol. 14, PLoS ONE, United States, C1

journal article

MiniStat: development and evaluation of a mini-potentiostat for electrochemical measurements

S Adams, E Doeven, K Quayle, A Kouzani

(2019), Vol. 7, pp. 31903-31912, IEEE access, Piscataway, N.J., C1

journal article

Fabrication of a conductive composite structure with enhanced stretchability using direct-write 3D printing

B Nasri-Nasrabadi, A Kaynak, S Adams, P Heidarian, A Kouzani

(2019), Vol. 6, Materials Research Express, C1

journal article

Creativity in electrical engineering degree programs: where is the content?

A Valentine, I Belski, M Hamilton, S Adams

(2019), Vol. 62, pp. 288-296, IEEE transactions on education, Piscataway, N.J., C1

journal article

Review informing the design of 3D food printing for people with swallowing disorders: constructive, conceptual, and empirical problems

Bronwyn Hemsley, S Palmer, Abbas Kouzani, Scott Adams, Susan Balandin

(2019), pp. 5735-5744, HICSS 52 : Proceedings of the 52nd Annual Hawaii International Conference on System Sciences, Wailea, Hawaii, E1

conference
2018

An electroactive polymer composite with reinforced bending strength, based on tubular micro carbonized-cellulose

B Nasri-Nasrabadi, A Kaynak, Z Komeily Nia, J Li, A Zolfagharian, S Adams, A Kouzani

(2018), Vol. 334, pp. 1775-1780, Chemical Engineering Journal, C1

journal article

An investigation into closed-loop treatment of neurological disorders based on sensing mitochondrial dysfunction

S Adams, A Kouzani, S Tye, K Bennet, M Berk

(2018), Vol. 15, Journal of NeuroEngineering and Rehabilitation, England, C1

journal article

Surface nanogrooving of carbon microtubes

B Nasri-Nasrabadi, A Kaynak, Z Komeily-Nia, S Adams, J Li, A Kouzani

(2018), Vol. 8, Scientific Reports, England, C1

journal article

A miniature and low-cost glucose measurement system

S Adams, E Buber, T Bicak, Y Yagci, L Toppare, A Kaynak, A Kouzani

(2018), Vol. 38, pp. 841-849, Biocybernetics and Biomedical Engineering, C1

journal article

A miniature device for in-situ measurement of concrete corrosion

D Corva, S Hosseini, S Adams, W Gates, F Collins, A Kouzani

(2018), pp. 2185-2190, ICMA 2018 : Proceedings of the 2018 IEEE international conference on mechatronics and automation, Changchun, China, E1

conference
2017

Integrated 3D printed scaffolds and electrical stimulation for enhancing primary human cardiomyocyte cultures

S Adams, A Ashok, R Kanwar, J Kanwar, A Kouzani

(2017), Vol. 6, pp. 18-24, Bioprinting, Amsterdam, The Netherlands, C1

journal article

Towards in-vivo ATP sensing

S Adams, A Kouzani, K Bennet, S Tye

(2017), pp. 2457-2460, TENCON 2016 : Technologies for smart nation : Proceedings of the 2016 IEEE Region 10 Conference, Marina Bay Sands, Singapore, E1

conference

Development of a single axis tilting quadcopter

R Oliver, S Khoo, M Norton, S Adams, A Kouzani

(2017), pp. 1849-1852, TENCON 2016 : Technologies for smart nation : Proceedings of the 2016 IEEE Region 10 Conference, Marina Bay Sands, Singapore, E1

conference

3D printing of a pavlova

A Kouzani, S Adams, R Oliver, Y Nguwi, B Hemsley, S Balandin

(2017), pp. 2281-2285, TENCON 2016 : Technologies for smart nation : 2016 IEEE Region 10 Conference, Marina Bay Sands, Singapore, E1

conference

3D printing of food for people with swallowing difficulties

A Kouzani, S Adams, D Whyte, R Oliver, B Hemsley, S Palmer, S Balandin

(2017), pp. 23-29, DesTech 2016: Proceedings of the International Conference on Design and Technology, Geelong, Victoria, E1

conference

3D printing of a photo-thermal self-folding actuator

A Zolfagharian, A Kouzani, B Nasri-Nasrabadi, S Adams, S Khoo, M Norton, I Gibson, A Kaynak

(2017), pp. 15-22, DesTech 2016: Proceedings of the International Conference on Design and Technology, Geelong, Victoria, E1

conference

Smartphone-based wireless operated milliliter-scale bioreactor

D Whyte, S Adams, M Alam, A Kouzani

(2017), pp. 281-288, DesTech 2016: Proceedings of the International Conference on Design and Technology, Geelong, Victoria, E1

conference
2016

Fabrication of biocompatible enclosures for an electronic implant using 3D printing

S Adams, A Kouzani, M Mohammed, C Usma Alvarez, S Tye

(2016), Vol. 6, pp. 17-32, International journal of rapid manufacturing, Olney, Eng., C1

journal article

A fast-scan cyclic voltammetry device with programmable excitation waveform

S Adams, A Kouzani

(2016), pp. 472-475, ICAMechS 2017 : Proceedings of the International Conference on Advanced Mechatronic Systems, Xiamen, China, E1

conference
2015

3D printed biocompatible enclosures for an implantable DBS microdevice

S Adams, A Kouzani, M Mohammed, C Usma Alvarez, S Tye

(2015), Vol. 20, pp. 155-161, Procedia technology, Amsterdam, The Netherlands, C1

journal article

Fabrication of force sensor circuits on wearable conductive textiles

C Usma, A Kouzani, J Chua, A Arogbonlo, S Adams, I Gibson

(2015), Vol. 20, pp. 263-269, Procedia technology, Amsterdam, The Netherlands, C1

journal article
2014

A miniature low-power adjustable constant-voltage deep brain stimulation device

S Adams, A Kouzani, R Kale, S Tye

(2014), pp. 259-262, ICME 2014 : Proceedings of the 2014 International Conference on Complex Medical Engineering 2014, Taipei, Taiwan, E1

conference

Funded Projects at Deakin

Other Public Sector Funding

Services to develop and provide thermal cameras for permanent installation.

Dr Scott Adams, Prof Abbas Kouzani

South Australian Research and Development Institute (SARDI)

  • 2021: $24,682

Digital Measurement of Wheelset Back to Back Dimensions - Phase 2.

Prof Abbas Kouzani, Dr Scott Adams

Innovation Connections

  • 2023: $50,000

Industry and Other Funding

Smart Swab Controller

Prof Abbas Kouzani, Dr Scott Adams

Endothelium Scanning Nanotechnology Proprietary Limited

  • 2019: $25,779

A Custom BLE Wireless Communication Interface for the AME Systems' Trailer Monitoring ECU

Prof Abbas Kouzani, Dr Scott Adams

AME Systems

  • 2021: $19,760

Investigation into the Feasibility of a Portable Device for Quantification of Cannabinoids and Terpenes in C. Sativa.

Dr Scott Adams, Prof Abbas Kouzani, Dr Egan Doeven, Dr Lawrence Webb, Prof Chang-Tsun Li, Dr Xufeng Lin

Medigrowth Trading Australia Pty Ltd

  • 2022: $23,781
  • 2021: $23,782

Testing the Application of Ultrasonic Waves for Determining Internal Pressure of Water Pipeline.

Prof Abbas Kouzani, Dr Scott Adams, Dr Ali Zolfagharian, Dr M A Parvez Mahmud

Fire NDT Pty Ltd

  • 2022: $27,280

Digital Measurement of Wheelset Back to Back Dimensions - Phase 2.

Prof Abbas Kouzani, Dr Scott Adams

UGL Rail Pty Ltd

  • 2023: $39,871
  • 2022: $39,871

End of Life Tyres to Green Hydrogen, Green Electricity & Carbon Black, Pilot - Commercial Manufacturing Facility.

Prof Abbas Kouzani, Dr Scott Adams, Dr Michael Norton, A/Prof Sui Yang Khoo

Clean Energy Resources Geelong P/L

  • 2024: $2,438,870
  • 2023: $224,029

Enhancement of the Digital System for Measurement of Wheelset back-to-back Dimensions.

Prof Abbas Kouzani, Dr Scott Adams

UGL Rail Pty Ltd

  • 2024: $13,390

Supervisions

Principal Supervisor
2021

Daniel John Whyte

Thesis entitled: Organic Powder Printing: Material Characterisation and 3D Printer Development Volumetric additive manufacturing via projected light and two wavelength polymerisation

Master of Engineering, Institute for Frontier Materials

Associate Supervisor
2024

Dean Michael Corva

Thesis entitled: An Artificial Intelligence-enabled Deep Brain Stimulation Device

Doctor of Philosophy (Engineering), School of Engineering

Naser Sharafkhani

Thesis entitled: An Intracortical Microprobe with Stiffness Control

Doctor of Philosophy (Engineering), School of Engineering

2022

Venkata Taalla

Thesis entitled: A non wearable fall detection system for elderly people

Master of Engineering, School of Engineering