You are currently a guest,
click here to login.

Prof Peter Hodgson

Institute for Frontier Materials

Principal Supervisor

2015
Prabhukumar Sellamuthu
Thesis entitled: Recrystallization kinetic study of copper-bearing strip cast steels.
Doctor of Philosophy (Engineering), Institute for Frontier Materials
2014
Bhawna Khemchandani
Thesis entitled: Environment Friendly Hydraulic Lubricants ¿ Properties & Performance.
Doctor of Philosophy (Biol & Chem), Institute for Frontier Materials
Apurv Kumar
Thesis entitled: Investigations into hydrodynamics and heat transfer characteristics of vacuum fluidised beds.
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Samiksha Wasnik
Thesis entitled: Tissue Engineered, Biomimetic Acellular Matrices for Expansion of Hematopoietic Progenitors.
Doctor of Philosophy (Biol & Chem), Institute for Frontier Materials
2013
Frank Will
Thesis entitled: Fuel Consumption- and Emission Analysis of Exhaust Heat Recovery Systems.
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Ashley James Denmead
Thesis entitled: Improved fracture toughness of fire resistant composites through rapid curing..
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Eileen An
Thesis entitled: Automotive Engineering Metal Foam Structures: Fabrication, Characterisation, Testing and Simulation.
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Subhash Sista
Thesis entitled: Role of surface properties of titanium alloys on osteoblasts response.
Doctor of Philosophy (Life & Env), Institute for Frontier Materials
Jiangting Wang
Thesis entitled: Mechanical Behaviour of Metallic Thin Films and Multilayers at the Micron/submicron Scale.
Doctor of Philosophy (Engineering), Institute for Frontier Materials
2012
Subrata Mukherjee
Thesis entitled: Nanoscale Precipitation in Advanced High Strength Steels.
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Ranjani Sudharsan
Thesis entitled: Development of Novel Crash Structures.
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Jeerachai Supasuthakul
Thesis entitled: Modelling of Bending-dominated Forming Processes of Metal Sheets.
Doctor of Philosophy (Engineering), Institute for Frontier Materials
2011
Sadaf Kashef
Thesis entitled: Biomechanical Properties of Porous Metal Scaffolds as Implant Materials.
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Leigh Robertson
Thesis entitled: Fatigue Characterisation of HSS and AHSS.
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Dengke Yang
Thesis entitled: Nanograin Metals and Metallic Multilayers Produced by Severe Plastic Deformation.
Doctor of Philosophy (Engineering), Institute for Frontier Materials
2010
Chetan Nikhare
Thesis entitled: Formability and Forming of Advanced Steels.
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Shokoufeh Malekjani
Thesis entitled: Cyclic Deformation Behaviour of Nanostructure Al.
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Adam Taylor
Thesis entitled: Study of the Deformation Behaviour of Austenite via Model Alloys.
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Paul Collins
Thesis entitled: CAE Crash Analysis of Structures in Oblique Loading.
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Jianyu Xiong
Thesis entitled: Titanium-based Shape Memory Alloys and Scaffolds for Biomedical Applications.
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Nima Yazdipour
Thesis entitled: Microscale Modeling of AISI 304 Behaviour During Hot Deformation.
Doctor of Philosophy (Engineering), Institute for Frontier Materials
2009
Srinivasa Chandramouliswar Sharma
Thesis entitled: Research Contributions to Development of Particulate Reinforced MMCs.
Doctor of Science, Institute for Frontier Materials
Alireza Asgari
Thesis entitled: Numerical Modelling of Advanced High Strength Steels.
Doctor of Philosophy (Engineering), Institute for Frontier Materials
2008
Adnan Teletovic
Thesis entitled: Turbulent Filling of Iron Castings.
Doctor of Philosophy (Engineering), Institute for Frontier Materials
2007
Ali Dehghan Manshadi
Thesis entitled: The Evolution of Recrystallization During and Following Hot Deformation.
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Dongye Fei
Thesis entitled: Springback Behaviour of TRIP Steels in Sheet Metal Forming.
Master of Engineering, Institute for Frontier Materials
Alireza Shokouhi
Thesis entitled: The Mechanisms of Dynamic Strain Induced Transformation and Post-Deformation Evolution.
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Kariyawasam B. M. P. Nanayakkara
Thesis entitled: Experimental Analysis of Friction in Forming Automotive Coated Steels.
Doctor of Philosophy (Engineering), Institute for Frontier Materials
2006
Matthias Weiss
Thesis entitled: An Investigation on the Forming Behaviour of Metal/Polymer Laminates.
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Jonathan Mullins
Thesis entitled: Testing and Modelling to Obtain Material Behaviour for Crash Simulations.
Doctor of Philosophy (Engineering), Institute for Frontier Materials
2005
Dragos Petrescu
Thesis entitled: Prediction of Ductile Fracture in the Cold Forging of Steel.
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Weimin Gao
Thesis entitled: Heat and Mass Transfer in Fluidised Bed Heat Treatment Furnaces.
Doctor of Philosophy (Engineering), Institute for Frontier Materials
2004
Aaron Walsh
Thesis entitled: Mathematical Modeling of the Crankshaft Pin Grinding Process.
Doctor of Philosophy (Engineering), Institute for Frontier Materials
2003
Wilbur Harvey
Thesis entitled: Advanced Technology and Economies of Scale in the Cement Industry.
Doctor of Technology, Institute for Frontier Materials
Ilana Timokhina
Thesis entitled: Microstructure and Mechanical Properties of TRIP Steels.
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Adam Samuel De Ruyter
Thesis entitled: Development of a Quality Cost Model for Automotive Stamping.
Master of Engineering, Institute for Frontier Materials
2002
Tim Hilditch
Thesis entitled: Sheared-Edge Quality in the Trimming of Sheet Metals.
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Matthew Dingle
Thesis entitled: Elastic Behaviour in Mechanical Draw Presses.
Doctor of Philosophy (Engineering), Institute for Frontier Materials
Christopher Miller
Thesis entitled: Tailoring a Lubricant for use with ZINCANNEAL ® Steel.
Master of Engineering, Institute for Frontier Materials
Stuart Palmer
Thesis entitled: An Evaluation of Australian Undergraduate Engineering Management Education for Flexible Delivery.
Doctor of Technology, Institute for Frontier Materials
David Haynes
Thesis entitled: Press Forming Performance of Galvanneal Coated Steel.
Master of Engineering, Institute for Frontier Materials
2001
Scott Cameron Savage
Thesis entitled: Evaluation of Cold Forming Lubricants for Fastener Manufacturing.
Master of Engineering, Institute for Frontier Materials
2000
Natasha Skoric
Thesis entitled: Effects of Aging Bake Hardenable Steel in Sheet Turning Metal Forming.
Master of Engineering, Institute for Frontier Materials
Jesus Baniqued Balatbat
Thesis entitled: Robust Surface Practices for Sheet Metal Forming Dies.
Master of Engineering, Institute for Frontier Materials
Dennis Brian Brockenshire
Thesis entitled: The Introduction, Management and Assessment of Change Processes at Barwon Water - A Technology Based Water Authority.
Doctor of Technology, Institute for Frontier Materials
Joseph Lanzon
Thesis entitled: Evaluating Lubricants in Sheet Metal Forming.
Master of Engineering, Institute for Frontier Materials
1999
David Dombkins
Thesis entitled: PROJAM: The Management of Complex Projects and Programs.
Doctor of Technology, Institute for Frontier Materials