Prof Russell Varley

Impact of Stoichiometry on the Network Structure, Properties, and Processing Relationships of an Epoxy Tannic Acid Resin System

Rusheni Senanayake, Houlei Gan, Juan Zhang, Dan Liu, Russell Varley

(2024), ACS Applied Polymer Materials, Washington, D.C., C1

Reclamation and reformatting of waste carbon fibers: A paradigm shift towards sustainable waste management

P Heidarian, F Mokhtari, M Naebe, L Henderson, R Varley

(2024), Vol. 203, pp. 1-20, Resources, Conservation and Recycling, Amsterdam, The Netherlands, C1

A review of the structural factors which control compression in carbon fibres and their composites

S Nunna, A Ravindran, J Mroszczok, C Creighton, R Varley

(2023), Vol. 303, pp. 116293-116293, Composite Structures, C1

Environmental, property and cost impact analysis of carbon fibre at increasing rates of production

T Groetsch, M Maghe, C Creighton, R Varley

(2023), Vol. 382, Journal of Cleaner Production, C1

Bioinspired Hard-Soft Interface Management for Superior Performance in Carbon Fibre Composites

B Newman, J Randall, R Varley, F Stojcevski, L Henderson

(2023), Fibers and Polymers, Berlin, Germany, C1

Economic and environmental effects of precursor variation in a continuous carbon fibre manufacturing process

T Groetsch, M Maghe, C Creighton, R Varley

(2023), Vol. 127, pp. 554-566, Journal of Industrial and Engineering Chemistry, Amsterdam, The Netherlands, C1

Development of non-combustible weaveable yarn through oxidative control of a textile acrylic fibre

E Pakdel, M Khan, N Nguyen, M Maghe, R Varley

(2023), Vol. 218, pp. 1-10, Polymer Degradation and Stability, Amsterdam, The Netherlands, C1

Degradation of Polyalkylene Glycol: Application of FTIR, HPLC, and TGA in Investigating PAG Oil Thermal Stability and Antioxidant Reaction Kinetics

S Kashi, M De Souza, C Creighton, S Al-Assafi, R Varley

(2023), Vol. 62, pp. 19638-19648, Industrial & Engineering Chemistry Research, Washington, D.C., C1

Synthesis and cure kinetics of bisoxazoline monomers during cationic ring-opening polymerization

S Issazadeh, M Khan, H Gan, J Zhang, L Henderson, R Varley

(2023), Journal of Applied Polymer Science, C1

Fire-retardant unsaturated polyester thermosets: The state-of-the-art, challenges and opportunities

S Seraji, P Song, R Varley, S Bourbigot, D Voice, H Wang

(2022), Vol. 430, pp. 1-18, Chemical Engineering Journal, Amsterdam, the Netherlands, C1

Aromatic tetra-glycidyl ether versus tetra-glycidyl amine epoxy networks: Influence of monomer structure and epoxide conversion

S Swan, C Creighton, J Griffin, B Gashi, R Varley

(2022), Vol. 239, pp. 1-11, Polymer, Amsterdam, The Netherlands, C1

Superhydrophobic natural melanin-coated cotton with excellent UV protection and personal thermal management functionality

E Pakdel, W Xie, J Wang, S Kashi, J Sharp, Q Zhang, R Varley, L Sun, X Wang

(2022), Vol. 433, pp. 1-13, Chemical Engineering Journal, Amsterdam, The Netherlands, C1

Enhancement of ionic conduction and mechanical properties for all-solid-state polymer electrolyte systems through ionic and physical bonding

J Choi, O Zabihi, R Varley, B Fox, M Naebe

(2022), Vol. 23, pp. 1-14, Materials Today Chemistry, Amsterdam, The Netherlands, C1

Investigation of the processability, thermal, mechanical and flame retardant properties of bisoxazoline composites

S Issazadeh, S Seraji, M Khan, H Gan, L Henderson, R Varley

(2022), Vol. 232, pp. 1-11, Composites Part B: Engineering, Amsterdam, The Netherlands, C1

Chemically Accelerated Stabilization of a Cellulose-Lignin Precursor as a Route to High Yield Carbon Fiber Production

N Le, M Trogen, R Varley, M Hummel, N Byrne

(2022), Vol. 23, pp. 839-846, Biomacromolecules, United States, C1

Multiple Hydrogen Bond Channel Structural Electrolyte for an Enhanced Carbon Fiber Composite Battery

J Choi, O Zabihi, R Varley, J Zhang, B Fox, M Naebe

(2022), Vol. 5, pp. 2054-2066, ACS Applied Energy Materials, C1

Continuous, pilot-scale production of carbon fiber from a textile grade PAN polymer

H Khan, J Kaur, M Naebe, S Hutchinson, R Varley

(2022), Vol. 31, pp. 1-12, Materials Today Communications, Amsterdam, The Netherlands, C1

3D printed continuous fibre composite repair of sandwich structures

Mathew Joosten, Michael Neave, Andrew Rider, Russell Varley

(2022), Vol. 290, pp. 115518-115518, Composite Structures, Amsterdam, The Netherlands, C1

Antibacterial textile and the effect of incident light wavelength on its photocatalytic self-cleaning activity

E Pakdel, W Daoud, R Varley, X Wang

(2022), Vol. 318, pp. 1-5, Materials Letters, Amsterdam, The Netherlands, C1

A 3D printable dynamic nanocellulose/nanochitin self-healing hydrogel and soft strain sensor

P Heidarian, S Gharaie, H Yousefi, M Paulino, A Kaynak, R Varley, A Kouzani

(2022), Vol. 291, pp. 1-9, Carbohydrate Polymers, Amsterdam, The Netherlands, C1

Carbon fiber polypropylene interphase modification as a route to improved toughness

J Randall, F Stojcevski, N Djordjevic, A Hendlmeier, B Dharmasiri, M Stanfield, D Knorr, N Tran, R Varley, L Henderson

(2022), Vol. 159, pp. 1-11, Composites Part A: Applied Science and Manufacturing, Amsterdam, The Netherlands, C1

The effect of DOPO concentration and epoxy amine stoichiometry on the rheological, thermal, mechanical and fire‐retardant properties of crosslinked networks

Seyed Seraji, Houlei Gan, Nguyen‐Duc Le, Juan Zhang, Russell Varley

(2022), pp. 1-10, Polymer International, London, Eng., C1

Improving mechanical properties and processability of a very high Tg epoxy amine network via anti-plasticizer fortification

S Swan, H Gan, C Creighton, J Griffin, B Gashi, R Varley

(2022), Vol. 139, Journal of Applied Polymer Science, C1

Universal Cure-Induced Shrinkage Model Applied to an Epoxy Amine as a Method to Optimize Composite Processing Time, Shrinkage, and Residual Stress

R Varley, M Khan, C Creighton

(2022), Vol. 61, pp. 13364-13374, Industrial and Engineering Chemistry Research, C1

High Performance Carbon Fiber Structural Batteries Using Cellulose Nanocrystal Reinforced Polymer Electrolyte

J Choi, O Zabihi, R Varley, B Fox, M Naebe

(2022), Vol. 14, pp. 45320-45332, ACS Applied Materials and Interfaces, United States, C1

A review of future directions in the development of sustainable carbon fiber from bio-based precursors

N Le, R Varley, M Hummel, M Trogen, N Byrne

(2022), Vol. 20, Materials Today Sustainability, C1

The role of β relaxations in determining the compressive properties of an epoxy amine network modified with POSS and mono-functional epoxy resins

L Reyes, S Swan, H Gan, S Seraji, J Zhang, R Varley

(2021), Vol. 93, Polymer Testing, C1

The role of β relaxations in controlling compressive properties in hyperbranched polymer-modified epoxy networks

L Reyes, S Swan, H Gan, S Seraji, J Zhang, R Varley

(2021), Vol. 53, pp. 393-401, Polymer Journal, C1

Polyaryletherketone (PAEK) thermoplastic composites via in-situ ring opening polymerisation

J Masasi, B Dao, C Dell'Olio, S Swan, S Issadazeh, J Wiggins, R Varley

(2021), Vol. 201, Composites Science and Technology, C1

Effect of boric acid on the stabilisation of cellulose-lignin filaments as precursors for carbon fibres

N Le, M Trogen, R Varley, M Hummel, N Byrne

(2021), Vol. 28, pp. 729-739, Cellulose, C1

Understanding the influence of key parameters on the stabilisation of cellulose-lignin composite fibres

N Le, M Trogen, Y Ma, R Varley, M Hummel, N Byrne

(2021), Vol. 28, pp. 911-919, Cellulose, C1

Study of the acoustic emission response to a core-shell rubber-toughened, high-temperature composite

S Swan, T Devenport, S Seraji, J Griffin, B Gashi, C Creighton, R Varley

(2021), Vol. 56, pp. 5609-5623, Journal of materials science, Cham, Switzerland, C1

A healable polyethylene adhesive using poly(ethylene methacrylic acid) (EMAA) for three-layer pipe coatings

Mel Dell'Olio, Juan Zhang, K Leong, Shamsul Samsudin, Russell Varley

(2021), Vol. 4, pp. 1-15, Multifunctional materials, Bristol, Eng., C1

Investigation of the Dual Polymerization of Rapid Curing Organophosphorous Modified Epoxy/Amine Resins and Subsequent Flame Retardancy

S Seraji, H Gan, S Issazadeh, R Varley

(2021), Vol. 222, Macromolecular Chemistry and Physics, C1

Modelling and analysis of the energy intensity in polyacrylonitrilie (PAN) precursor and carbon fibre manufacturing

A Dér, N Dilger, A Kaluza, C Creighton, S Kara, R Varley, C Herrmann, S Thiede

(2021), Vol. 303, Journal of Cleaner Production, C1

Phosphazene as an effective flame retardant for rapid curing epoxy resins

S Seraji, H Gan, S Swan, R Varley

(2021), Vol. 164, Reactive and Functional Polymers, C1

Dynamic nanohybrid-polysaccharide hydrogels for soft wearable strain sensing

P Heidarian, H Yousefi, A Kaynak, M Paulino, S Gharaie, R Varley, A Kouzani

(2021), Vol. 21, Sensors, Switzerland, C1

Dynamic nanocellulose hydrogels: Recent advancements and future outlook

P Heidarian, A Kaynak, M Paulino, A Zolfagharian, R Varley, A Kouzani

(2021), Vol. 270, Carbohydrate Polymers, England, C1

Carbon fibre waste recycling into hybrid nonwovens for electromagnetic interference shielding and sound absorption

E Pakdel, S Kashi, T Baum, K Usman, J Razal, R Varley, X Wang

(2021), Vol. 315, Journal of Cleaner Production, C1

Superhydrophobic and photocatalytic self-cleaning cotton fabric using flower-like N-doped TiO2/PDMS coating

E Pakdel, H Zhao, J Wang, B Tang, R Varley, X Wang

(2021), Vol. 28, pp. 8807-8820, Cellulose, C1

Recycled carbon fiber nonwoven functionalized with fluorine-free superhydrophobic PDMS/ZIF-8 coating for efficient oil-water separation

E Pakdel, J Wang, R Varley, X Wang

(2021), Vol. 9, Journal of Environmental Chemical Engineering, C1

Cure Kinetics and Network Development of a Very High Tg Naphthalene-Based Epoxy Amine Network

S Swan, C Creighton, B Gashi, J Griffin, R Varley

(2021), Vol. 3, pp. 5717-5726, ACS Applied Polymer Materials, C1

Gas Emission Study of the Polyacrylonitrile-Based Continuous Pilot-Scale Carbon Fiber Manufacturing Process

T Groetsch, M Maghe, R Rana, R Hess, S Nunna, J Herron, D Buckmaster, C Creighton, R Varley

(2021), Vol. 60, pp. 17379-17389, Industrial and Engineering Chemistry Research, Washington, D.C., C1-1

Water activated healing of thiolene boronic ester coatings

M de Souza, C Dubois, J Zhang, R Varley

(2020), Vol. 139, Progress in Organic Coatings, C1

Double dynamic cellulose nanocomposite hydrogels with environmentally adaptive self-healing and pH-tuning properties

Pejman Heidarian, Abbas Kouzani, Akif Kaynak, Mariana Paulino, Bijan Nasri-Nasrabadi, Russell Varley

(2020), Vol. 27, pp. 1407-1422, Cellulose, Dordrecht, The Netherlands, C1

Synthesis of tri-aryl ketone amine isomers and their cure with epoxy resins

L Reyes, B Dao, W Vogel, J Bijleveld, S Tucker, S Christensen, J Wiggins, T Dingemans, R Varley

(2020), Vol. 31, pp. 827-837, Polymers for Advanced Technologies, London, Eng., C1

Dynamic plant-derived polysaccharide-based hydrogels

P Heidarian, A Kouzani, A Kaynak, M Paulino, B Nasri-Nasrabadi, A Zolfagharian, R Varley

(2020), Vol. 231, Carbohydrate Polymers, England, C1

Synthesis of Tri-Aryl Methane Epoxy Resin Isomers and Their Cure with Aromatic Amines

L Reyes, S Issazadeh, J Zhang, B Dao, R Varley

(2020), Vol. 305, Macromolecular Materials and Engineering, C1

Subtle variations in the structure of crosslinked epoxy networks and the impact upon mechanical and thermal properties

L Reyes, J Zhang, B Dao, D Nguyen, R Varley

(2020), Vol. 137, Journal of Applied Polymer Science, C1

New approaches to bonding thermoplastic and thermoset polymer composites

J Zhang, M de Souza, C Creighton, R Varley

(2020), Vol. 133, Composites Part A: Applied Science and Manufacturing, C1

Experimental and simulation study of effect of thickness on performance of (butylene adipate-co-terephthalate) and poly lactide nanocomposites incorporated with graphene as stand-alone electromagnetic interference shielding and metal-backed microwave absorbers

S Kashi, R Gupta, S Bhattacharya, R Varley

(2020), Vol. 195, Composites Science and Technology, C1

Synthesis of tri-aryl ether epoxy resin isomers and their cure with diamino diphenyl sulphone

Larry Reyes, Jane Zhang, Buu Dao, Russell Varley

(2020), Vol. 58, pp. 1410-1425, Journal of Polymer Science, Hoboken, N.J., C1

1D/2D Nanomaterials Synergistic, Compressible, and Response Rapidly 3D Graphene Aerogel for Piezoresistive Sensor

X Cao, J Zhang, S Chen, R Varley, K Pan

(2020), Vol. 30, Advanced Functional Materials, C1

Beyond the ring flip: A molecular signature of the glass-rubber transition in tetrafunctional epoxy resins

F Vuković, S Swan, L Reyes, R Varley, T Walsh

(2020), Vol. 206, Polymer, C1

Rapid Cross-Linking of Epoxy Thermosets Induced by Solvate Ionic Liquids

Nishar Hameed, Daniel Eyckens, Benjamin Long, Nisa Salim, Jaworski Capricho, Linden Servinis, Mandy De Souza, Magenta Perus, Russell Varley, Luke Henderson

(2020), Vol. 2, pp. 2651-2657, ACS Applied Polymer Materials, Washington, D.C., C1

Cellulose-lignin composite fibers as precursors for carbon fibers: Part 2 - The impact of precursor properties on carbon fibers

N Le, M Trogen, Y Ma, R Varley, M Hummel, N Byrne

(2020), Vol. 250, Carbohydrate Polymers, England, C1

Synthesis of a phosphorus‑silicone modifier imparting excellent flame retardancy and improved mechanical properties to a rapid cure epoxy

H Gan, S Seraji, J Zhang, S Swan, S Issazadeh, R Varley

(2020), Vol. 157, Reactive and Functional Polymers, C1

Rational Design of Mussel-Inspired Hydrogels with Dynamic Catecholato-Metal Coordination Bonds

P Heidarian, A Kouzani, A Kaynak, B Bahrami, M Paulino, B Nasri-Nasrabadi, R Varley

(2020), Vol. 41, Macromolecular Rapid Communications, Germany, C1

Phosphorus-based α-amino acid mimetic for enhanced flame-retardant properties in an epoxy resin

M Stanfield, F Stojcevski, A Hendlmeier, R Varley, J Carrascal, A Osorio, D Eyckens, L Henderson

(2019), Vol. 72, pp. 226-232, Australian Journal of Chemistry, C1

Effect of aromatic substitution on the kinetics and properties of epoxy cured tri-phenylether amines

R Varley, B Dao, S Tucker, S Christensen, J Wiggins, T Dingemans, W Vogel, M Marchetti, Z Madzarevic

(2019), Vol. 136, Journal of Applied Polymer Science, C1

Understanding the effects of in-service temperature and functional fluid on the ageing of silicone rubber

S Kashi, M De Souza, S Al-Assafi, R Varley

(2019), Vol. 11, Polymers, Switzerland, C1

Time dependent structure and property evolution in fibres during continuous carbon fibre manufacturing

S Nunna, M Maghe, R Rana, R Varley, D Knorr, J Sands, C Creighton, L Henderson, M Naebe

(2019), Vol. 12, Materials, Switzerland, C1

Effect of aromatic substitution on the cure reaction and network properties of anhydride cured triphenyl ether tetraglycidyl epoxy resins

R Varley, B Dao, T Nguyen, S Lee, T Nishino

(2019), Vol. 30, pp. 1525-1537, Polymers for Advanced Technologies, C1

Recovery of Mode I self-healing interlaminar fracture toughness of fiber metal laminate by modified double cantilever beam test

L Shanmugam, M Naebe, J Kim, R Varley, J Yang

(2019), Vol. 16, pp. 25-29, Composites Communications, Piscataway, N.J., C1

Facile one pot synthesis of strong epoxy/agar hybrid hydrogels

M Jabarulla Khan, Q Guo, R Varley

(2019), Vol. 26, Journal of Polymer Research, C1

Mechanical, thermal, and morphological behavior of silicone rubber during accelerated aging

S Kashi, R Varley, M De Souza, S Al-Assafi, A Di Pietro, C De Lavigne, B Fox

(2018), Vol. 57, pp. 1687-1696, Polymer - plastics technology and engineering, Abingdon, Eng., C1

Microwave attenuation of graphene modified thermoplastic poly(butylene adipate-coterephthalate) nanocomposites

S Kashi, S Hadigheh, R Varley

(2018), Vol. 10, Polymers, Switzerland, C1

Adhesives performance of 3-layer PE pipe coatings: effects of MAH loading, PE particles size, coating interval time and service temperature

M Samsudin, M Dell'Olio, K Leong, Z Ahamid, R Varley

(2016), Vol. 99, pp. 157-165, Progress in organic coatings, Amsterdam, The Netherlands, C1

Poly(ethylene-co-methacrylic acid) (EMAA) as an efficient healing agent for high performance epoxy networks using diglycidyl ether of bisphenol A (DGEBA)

K Pingkarawat, C Dell'Olio, R Varley, A Mouritz

(2016), Vol. 92, pp. 153-163, Polymer, Amsterdam, The Netherlands, C1

Effect of modification of cyclic butylene terephthalate on crystallinity and properties after ring-opening polymerisation

C Dell'Olio, S Leonard, B Dao, R Varley, K Pingkarawat

(2015), Vol. 50, pp. 8073-8088, Journal of materials science, New York, N.Y., C1-1

An efficient healing agent for high temperature epoxy composites based upon tetra-glycidyl diamino diphenyl methane

K Pingkarawat, C Dell'Olio, R Varley, A Mouritz

(2015), Vol. 78, pp. 201-210, Composites Part A: applied science and manufacturing, Doetinchem, The Netherlands, C1-1

Epoxy/poly(ethylene-co-methacrylic acid) blends as thermally activated healing agents in an epoxy/amine network

C Dell'Olio, Q Yuan, R Varley

(2015), Vol. 300, pp. 70-79, Macromolecular materials and engineering, Weinheim, Germany, C1-1

Mechanical properties of mendable composites containing self-healing thermoplastic agents

K Pingkarawat, C Wang, R Varley, A Mouritz

(2014), Vol. 65, pp. 10-18, Composites part A: applied science and manufacturing, Kidlington, Eng., C1-1

Synthesis and characterisation of new sulphur-containing epoxy networks

W Vogel, T Dingemans, R Varley, W Tian, B Dao, S Tucker, S Christensen

(2014), Vol. 26, pp. 420-435, High performance polymers, London, Eng., C1-1

Healing of fatigue delamination cracks in carbon-epoxy composite using mendable polymer stitching

K Pingkarawat, C Wang, R Varley, A Mouritz

(2014), Vol. 25, pp. 75-86, Journal of intelligent material systems and structures, London, Eng., C1-1

Low-molecular-weight thermoplastic modifiers as effective healing agents in mendable epoxy networks

R Varley, B Dao, C Pillsbury, S Kalista, F Jones

(2014), Vol. 25, pp. 107-117, Journal of intelligent material systems and structures, London, Eng., C1-1

Special topic issue on self-healing materials: preface

I Bond, R Trask, R Varley

(2014), Vol. 25, pp. 3-3, Journal of intelligent material systems and structures, London, Eng., C1-1

Thermo-reversible healing in a crosslinked polymer network containing covalent and thermo-reversible bonds

S Khor, R Varley, S Shen, Q Yuan

(2013), Vol. 128, pp. 3743-3750, Journal of applied polymer science, London, Eng., C1-1

Different β nucleants and the resultant microstructural, fracture, and tensile properties for filled and unfilled ISO polypropylene

R Varley, M Dell'Olio, Q Yuan, S Khor, K Leong, S Bateman

(2013), Vol. 128, pp. 619-627, Journal of applied polymer science, London, Eng., C1-1

Thermoplastic healing in epoxy networks: exploring performance and mechanism of alternative healing agents

R Varley, D Craze, A Mouritz, C Wang

(2013), Vol. 298, pp. 1232-1242, Macromolecular materials and engineering, Weinheim, Germany, C1-1

Healing of carbon fibre-epoxy composites using thermoplastic additives

K Pingkarawat, T Bhat, D Craze, C Wang, R Varley, A Mouritz

(2013), Vol. 4, pp. 5007-5015, Polymer chemistry, Cambridge, Eng., C1-1

Effect of ionic content on ballistic self-healing in EMAA copolymers and ionomers

S Kalista, J Pflug, R Varley

(2013), Vol. 4, pp. 4910-4926, Polymer Chemistry, United Kingdom, C1-1

Effect of mendable polymer stitch density on the toughening and healing of delamination cracks in carbon-epoxy laminates

K Pingkarawat, C Wang, R Varley, A Mouritz

(2013), Vol. 50, pp. 22-30, Composites Part A: Applied Science and Manufacturing, United Kingdom, C1-1

The effect of surface treatments on the mechanical properties of basalt-reinforced epoxy composites

R Varley, W Tian, K Leong, A Leong, F Fredo, M Quaresimin

(2013), Vol. 34, pp. 320-329, Polymer Composites, United States, C1-1

Phosphorus intercalation of halloysite nanotubes for enhanced fire properties of polyamide 6

D Marney, W Yang, L Russell, S Shen, T Nguyen, Q Yuan, R Varley, S Li

(2012), Vol. 23, pp. 1564-1571, Polymers for Advanced Technologies, United Kingdom, C1-1

self-healing of delamination fatigue cracks in carbon fibre-epoxy laminate using mendable thermoplastic

K Pingkarawat, C Wang, R Varley, A Mouritz

(2012), Vol. 47, pp. 4449-4456, Journal of Materials Science, Amsterdam, The Netherlands, C1-1

Self-healing of delamination cracks in mendable epoxy matrix laminates using poly[ethylene-co-(methacrylic acid)] thermoplastic

K Pingkarawat, C Wang, R Varley, A Mouritz

(2012), Vol. 43, pp. 1301-1307, Composites Part A: Applied Science and Manufacturing, United Kingdom, C1-1

emaa as a healing agent for mendable high temperature epoxy amine thermosets

R Varley, F Charve

(2012), Vol. 43, pp. 1073-1080, Composites Part A: Applied Science and Manufacturing, Amsterdam, The Netherlands, C1-1

Confirmation of the healing mechanism in a mendable EMAA-epoxy resin

S Meure, R Varley, D Wu, S Mayo, K Nairn, S Furman

(2012), Vol. 48, pp. 524-531, European Polymer Journal, United Kingdom, C1-1

thermally activated healing in a mendable resin using a non woven emaa fabric

R Varley, G Parn

(2012), Vol. 72, pp. 453-460, Composites Science and Technology, Amsterdam, The Netherlands, C1-1

The effect of cluster plasticisation on the self healing behaviour of ionomers

R Varley, S Shen, S van der Zwaag

(2010), Vol. 51, pp. 679-686, Polymer, United Kingdom, C1-1

Designing green, self-healing coatings for metal protection

A Hughes, I Cole, T Muster, R Varley

(2010), Vol. 2, pp. 143-151, NPG Asia Materials, Japan, C1-1

Biocompatibility and modification of the protein-based adhesive secreted by the Australian frog Notaden bennetti

L Graham, S Danon, G Johnson, C Braybrook, N Hart, R Varley, M Evans, G McFarland, M Tyler, J Werkmeister, J Ramshaw

(2010), Vol. 93, pp. 429-441, Journal of Biomedical Materials Research Part A, United States, C1-1

Autonomous damage initiated healing in a thermo-responsive ionomer

R Varley, S van der Zwaag

(2010), Vol. 59, pp. 1031-1038, Polymer International, Chichester, Eng., C1-1

Moisture induced crack filling in barrier coatings containing montmorillonite as an expandable phase

F Miccichè, H Fischer, R Varley, S van der Zwaag

(2008), Vol. 202, pp. 3346-3353, Surface and coatings technology, Amsterdam, The Netherlands, C1-1

Development of a quasi-static test method to investigate the origin of self-healing in ionomers under ballistic conditions

R Varley, S van der Zwaag

(2008), Vol. 27, pp. 11-19, Polymer testing, London, Eng., C1-1

Understanding the effect of nano-modifier addition upon the properties of fibre reinforced laminates

M Quaresimin, R Varley

(2008), Vol. 68, pp. 718-726, Composites science and technology, Amsterdam, The Netherlands, C1-1

Preparation and characterisation of polyamide-polyimide organoclay nanocomposites

R Varley, A Groth, K Leong

(2008), Vol. 57, pp. 618-625, Polymer international, West Sussex, United Kingdom, C1-1

The role of nanodispersion on the fire performance of organoclay-polyamide nanocomposites

R Varley, A Groth, K Leong

(2008), Vol. 68, pp. 2882-2891, Composites science and technology, Amsterdam, The Netherlands, C1-1

Towards an understanding of thermally activated self-healing of an ionomer system during ballistic penetration

R Varley, S van der Zwaag

(2008), Vol. 56, pp. 5737-5750, Acta materialia, Amsterdam, The Netherlands, C1-1

Understanding the decomposition and fire performance processes in phosphorus and nanomodified high performance epoxy resins and composites

W Liu, R Varley, G Simon

(2007), Vol. 48, pp. 2345-2354, Polymer, Amsterdam, The Netherlands, C1-1

Effect of ultrasonic dispersion methods on thermal and mechanical properties of organoclay epoxy nanocomposites

K Dean, J Krstina, W Tian, R Varley

(2007), Vol. 292, pp. 415-427, Macromolecular materials and engineering, London, Eng., C1-1

Reaction kinetics and phase transformations during cure of a thermoplastic-modified epoxy thermoset

R Varley

(2007), Vol. 292, pp. 46-61, Macromolecular materials and engineering, London, Eng., C1-1

Phosphorus-containing diamine for flame retardancy of high functionality epoxy resins. Part II. The thermal and mechanical properties of mixed amine systems

W Liu, R Varley, G Simon

(2006), Vol. 47, pp. 2091-2098, Polymer, Amsterdam, The Netherlands, C1-1

Investigation of the reaction mechanism of different epoxy resins using a phosphorus-based hardener

R Varley, W Liu, G Simon

(2006), Vol. 99, pp. 3288-3299, Journal of applied polymer science, London, Eng., C1-1

Toughening of a carbon fibre reinforced epoxy anhydride composite using an epoxy terminated hyperbranched modifier

M DeCarli, K Kozielski, W Tian, R Varley

(2005), Vol. 65, pp. 2156-2166, Composites science and technology, Amsterdam, The Netherlands, C1-1

Processing and chemorheology of epoxy resins and their blends with dendritic hyperbranched polymers

D Ratna, R Varley, G Simon

(2004), Vol. 92, pp. 1604-1610, Journal of applied polymer science, Chichester, Eng., C1-1

Effect of organo-phosphorus and nano-clay materials on the thermal and fire performance of epoxy resins

M Hussain, R Varley, Z Mathys, Y Cheng, G Simon

(2004), Vol. 91, pp. 1233-1253, Journal of applied polymer science, Chichester, Eng., C1-1

A phosphorus-containing diamine for flame-retardant, high-functionality epoxy resins. I. synthesis, reactivity, and thermal degradation properties

W Liu, R Varley, G Simon

(2004), Vol. 92, pp. 2093-2100, Journal of applied polymer science, Chichester, Eng., C1-1

Influence of substituents on the kinetics of epoxy/aromatic diamine resin systems

H Liu, A Uhlherr, R Varley, M Bannister

(2004), Vol. 42, pp. 3143-3156, Journal of polymer science: part A: polymer chemistry, Chichester, Eng., C1-1

Thermal stability and water uptake of high performance epoxy layered silicate nanocomposites

O Becker, R Varley, G Simon

(2004), Vol. 40, pp. 187-195, European polymer journal, Amsterdam, The Netherlands, C1-1

Toughening of epoxy resin systems using low-viscosity additives

R Varley

(2004), Vol. 53, pp. 78-84, Polymer international, Chichester, Eng., C1-1

Toughening of an epoxy anhydride resin system using an epoxidized hyperbranched polymer

R Varley, W Tian

(2004), Vol. 53, pp. 69-77, Polymer international, Chichester, Eng., C1-1

Nanocomposites based on a combination of epoxy resin, hyperbranched epoxy and a layered silicate

D Ratna, O Becker, R Krishnamurthy, G Simon, R Varley

(2003), Vol. 44, pp. 7449-7457, Polymer, London, Eng., C1-1

Thermal and mechanical characterisation of intercalated epoxy nanocomposites

O Becker, G Simon, R Varley, Y Cheng, J Hodgkin

(2003), Vol. 19, pp. 199-217, International journal of materials and product technology, Olney, Eng., C1-1

Clay-reinforced epoxy nanocomposites

D Ratna, N Manoj, R Varley, R Singh Raman, G Simon

(2003), Vol. 52, pp. 1403-1407, Polymer international, Chichester, Eng., C1-1

Layered silicate nanocomposites based on various high-functionality epoxy resins: the influence of cure temperature on morphology, mechanical properties, and free volume

O Becker, Y-B Cheng, R Varley, G Simon

(2003), Vol. 36, pp. 1616-1625, Macromolecules, Washington, D.C., C1-1

Synthesis, thermal behavior, and cone calorimetry of organophosphorus epoxy materials

M Hussain, R Varley, M Zenka, G Simon

(2003), Vol. 90, pp. 3696-3707, Journal of applied polymer science, Hoboken, N.J., C1-1

Toughening of trifunctional epoxy using an epoxy-functionalized hyperbranched polymer

D Ratna, R Varley, G Simon

(2003), Vol. 89, pp. 2339-2345, Journal of applied polymer science, Hoboken, N.J., C1-1

Layered silicate nanocomposites based on various high-functionality epoxy resins: the influence of an organoclay on resin cure

O Becker, G Simon, R Varley, P Halley

(2003), Vol. 43, pp. 850-862, Polymer engineering and science, Hoboken, N.J., C1-1

Studies on blends of epoxy-functionalized hyperbranched polymer and epoxy resin

D Ratna, R Varley, R Singh Raman, G Simon

(2003), Vol. 38, pp. 147-154, Journal of materials science, Berlin, Germany, C1-1

Morphology, thermal relaxations and mechanical properties of layered silicate nanocomposites based upon high-functionality epoxy resins

O Becker, R Varley, G Simon

(2002), Vol. 43, pp. 4365-4373, Polymer, Amsterdam, The Netherlands, C1-1

Toughening of a trifunctional epoxy system part VI. Structure property relationships of the thermoplastic toughened system

R Varley, J Hodgkin, G Simon

(2001), Vol. 42, pp. 3847-3858, Polymer, Amsterdam, The Netherlands, C1-1

Toughening of a trifunctional epoxy system part III. Kinetic and morphological study of the thermoplastic modified cure process

R Varley, J Hodgkin, D Hawthorne, G Simon, D McCulloch

(2000), Vol. 41, pp. 3425-3436, Polymer, Amsterdam, The Netherlands, C1-1

Toughening of trifunctional epoxy system. V. Structure-property relationships of neat resin

R Varley, J Hodgkin, G Simon

(2000), Vol. 77, pp. 237-248, Journal of applied polymer science, Chichester, Eng., C1-1

Thermoplastic toughening of epoxy resins: a critical review

J Hodgkin, G Simon, R Varley

(1998), Vol. 9, pp. 3-10, Polymers for advanced technologies, New York, N.Y., C1-1

Toughening of a trifunctional epoxy system: IV. Dynamic mechanical relaxational study of the thermoplastic-modified cure process

R Varley, J Hodgkin, D Hawthorne, G Simon

(1997), Vol. 35, pp. 153-163, Journal of polymer science part B: polymer physics, Chichester, Eng., C1-1

Effect of reinforcing fibres on the morphology of a toughened epoxy/amine system

R Varley, J Hodgkin

(1997), Vol. 38, pp. 1005-1009, Polymer, Amsterdam, The Netherlands, C1-1

Toughening of a trifunctional epoxy system: 1. Near infra-red spectroscopy study of homopolymer cure

R Varley, G Heath, D Hawthorne, J Hodgkin, G Simon

(1995), Vol. 36, pp. 1347-1355, Polymer, London, Eng., C1-1

Toughening epoxy resins with polyepichlorohydrin

M Jackson, L Edmond, R Varley, P Warden

(1993), Vol. 48, pp. 1259-1269, Journal of applied polymer science, Hoboken, N.J., C1-1