Prof Peter Hodgson

The role of parent austenite grain size on the variant selection and intervariant boundary network in a lath martensitic steel

A Mirzaei, P Hodgson, X Ma, V Peterson, E Farabi, G Rohrer, H Beladi

(2024), Vol. 889, pp. 1-22, Materials Science & Engineering: A, Amsterdam, The Netherlands, C1

AlxCoCrFeNi high entropy alloys from metal scrap: Microstructure and mechanical properties

Q Chao, J Joseph, M Annasamy, P Hodgson, M Barnett, D Fabijanic

(2024), Vol. 976, pp. 1-13, Journal of Alloys and Compounds, Amsterdam, The Netherlands, C1

Combining strength and ductility in a precipitation (γ') hardened Fe-rich compositionally complex alloy via recystallisation

M Annasamy, J Joseph, P Cizek, A Vahid, M Barnett, P Hodgson, D Fabijanic

(2024), Vol. 896, pp. 1-11, Materials Science & Engineering: A, Amsterdam, The Netherlands, C1

New Insight into Toughness Enhancement in a Lath Martensitic Steel

A Mirzaei, C Barrett, X Ma, P Hodgson, H Beladi

(2024), Metallurgical and Materials Transactions A, Berlin, Germany, C1

Refractory High-Entropy Alloys Produced from Elemental Powders by Severe Plastic Deformation

R Lapovok, M Ferdowsi, V Shterner, P Hodgson, A Mazilkin, E Boltynjuk, R Kulagin, S Semiatin

(2024), pp. 1-15, Advanced Engineering Materials, London, Eng., C1

Yield point phenomenon in low-alloyed TRIP-aided steel: role of retained austenite

R Ranjan, H Beladi, P Hodgson, S Singh

(2023), Vol. 39, pp. 85-93, Materials Science and Technology (United Kingdom), C1

The impact of PET microplastic fibres on PVDF ultrafiltration performance - A short-term assessment of MP fouling in simple and complex matrices

Cyril Hachemi, Marie Enfrin, Ahmed Rashed, Veeriah Jegatheesan, Peter Hodgson, Damien Callahan, Judy Lee, Ludovic Dumée

(2023), Vol. 310, pp. 1-12, Chemosphere, Amsterdam, The Netherlands, C1

Rolling-assisted direct energy deposited Inconel 718: Microstructural evolution and mechanical properties after optimized heat treatment

C Li, P Hodgson, M Preuss, Y Chen, X Wu, Y Zhu, Y Tian, A Huang

(2023), Vol. 144, pp. 118-127, Journal of Materials Science and Technology, C1

Microstructure features and carbon partitioning in low temperature bainitic steels: The effect of magnetic field

B Dong, T Hou, K Wu, B Rolfe, L Kong, M Cai, P Hodgson

(2023), Vol. 196, pp. 112635-112635, Materials Characterization, C1

Interphase and fibrous precipitation in a thermomechanically processed V-Nb-Mo microalloyed steel

S Mukherjee, I Timokhina, J Wang, A Chakraborty, S Pramanik, S Kundu, P Hodgson

(2023), Vol. 39, pp. 1010-1020, Materials Science and Technology, London, Eng., C1

The effect of quenching on the hinderance of the NbC growth process in a model microalloyed steel

D Poddar, P Cizek, H Beladi, P Hodgson

(2023), pp. 1-15, Philosophical Magazine, London, Eng., C1

Tailoring LPSO phases in Mg-Y-Zn alloys to govern hydrogenation kinetics

K Nicholson, V Skripnyuk, C Xu, X Gao, E Rabkin, P Hodgson, R Lapovok

(2023), Vol. 58, pp. 8572-8596, Journal of Materials Science, C1

What should an adaptable building look like?

H Watt, B Davison, P Hodgson, C Kitching, D Danielle's

(2023), Vol. 18, pp. 1-10, Resources, Conservation and Recycling Advances, Amsterdam, The Netherlands, C1

Design of precipitation (γ') strengthened Fe-rich medium entropy alloys

J Joseph, M Annasamy, P Cizek, A Vahid, P Hodgson, M Barnett, D Fabijanic

(2023), Vol. 235, pp. 115630-115630, Scripta Materialia, C1

The effect of Ti-Mo additions on microstructural evolution and superplastic deformation behavior of cold-rolled medium Mn steels

H Zhang, H Li, H Yan, S Tang, H Beladi, P Hodgson, M Cai

(2023), Vol. 203, pp. 1-12, Materials Characterization, Amsterdam, The Netherlands, C1

Improved Mn-segregation bands and its influence on deformation behavior in a severely warm-rolled 10Mn lightweight steel

S Sun, H Li, H Huang, H Ding, H Beladi, P Hodgson, M Cai

(2023), Vol. 216, pp. 1-10, Vacuum, Amsterdam, The Netherlands, C1

Factors dictating the extent of low elongation in high sulfur-containing bainitic steels

Baoqi Dong, Tingping Hou, Peter Hodgson, Oleg Isayev, Oleksandr Hress, Serhii Yershov, Kaiming Wu

(2023), Vol. 114, pp. 1080-1087, International Journal of Materials Research, Berlin, Germany, C1-1

Unique Yttria Nanoparticle Strengthening in an Inconel 718 Superalloy Fabricated by Additive Manufacturing

S Dai, J Zhu, X Yan, S Wu, Y Liu, X Gao, H Fraser, P Hodgson, Y Zhu, M Heilmaier, A Huang

(2023), Advanced Materials Technologies, London, Eng., C1

Design of LPSO Phases in Mg-Y-Ni Alloys to Impact Hydrogenation Kinetics

K Nicholson, V Skripnyuk, C Xu, X Gao, E Rabkin, P Hodgson, R Lapovok

(2023), Vol. 4, pp. 658-678, Hydrogen, Basel, Switzerland, C1

Stress-state-dependent deformation and fracture behaviors in a cold-rolled 7Mn steel

X Wei, X Zhang, M Cai, Z Peng, Y Liu, C Lian, H Peng, P Hodgson

(2022), Vol. 831, pp. 1-8, Materials Science and Engineering A, Amsterdam, The Netherlands, C1

Interface characteristics and precipitation during the austenite-to-ferrite transformation of a Ti-Mo microalloyed steel

I Bikmukhametov, H Beladi, J Wang, V Tari, A Rollett, P Hodgson, I Timokhina

(2022), Vol. 893, pp. 1-12, Journal of Alloys and Compounds, Amsterdam, The Netherlands, C1

Investigation of material failure in micro-stamping of metallic bipolar plates

P Zhang, M Pereira, B Rolfe, D Wilkosz, P Hodgson, M Weiss

(2022), Vol. 73, pp. 54-66, Journal of Manufacturing Processes, Amsterdam, The Netherlands, C1

A microstructure-based creep model for additively manufactured nickel-based superalloys

S Wu, H Song, H Peng, P Hodgson, H Wang, X Wu, Y Zhu, M Lam, A Huang

(2022), Vol. 224, pp. 1-13, Acta Materialia, Amsterdam, The Netherlands, C1

Microstructure evolution of 316L stainless steel during solid-state additive friction stir deposition

H Beladi, E Farabi, P Hodgson, M Barnett, G Rohrer, D Fabijanic

(2022), Vol. 102, pp. 618-633, Philosophical Magazine, London, Eng., C1

Hybrid effect of stress state and strain rate on the deformation and ductile fracture behaviour of TRIP800 steel sheet

X Wei, Y Liu, Y Yu, X Zhang, P Hodgson

(2022), Vol. 833, pp. 1-13, Materials Science and Engineering A, Amsterdam, The Netherlands, C1

On the pitting behaviour of laser powder bed fusion prepared 316L stainless steel upon post-processing heat treatments

K Wang, Q Chao, M Annasamy, P Hodgson, S Thomas, N Birbilis, D Fabijanic

(2022), Vol. 197, pp. 1-13, Corrosion Science, Amsterdam, The Netherlands, C1

Optimising the Al and Ti compositional window for the design of γ' (L1₂)-strengthened Al-Co-Cr-Fe-Ni-Ti high entropy alloys

J Joseph, M Annasamy, S Kada, P Hodgson, M Barnett, D Fabijanic

(2022), Vol. 835, pp. 1-9, Materials Science and Engineering A, Amsterdam, The Netherlands, C1

Towards creep property improvement of selective laser melted Ni-based superalloy IN738LC

H Song, M Lam, Y Chen, S Wu, P Hodgson, X Wu, Y Zhu, A Huang

(2022), Vol. 112, pp. 301-314, Journal of Materials Science and Technology, Amsterdam, The Netherlands, C1

The microstructure of high manganese TWIP steels produced via simulated direct strip casting

R Othman, T Dorin, N Stanford, P Hodgson

(2022), Vol. 38, pp. 30-38, Materials Science and Technology (United Kingdom), London, Eng., C1

Challenges and solutions in the synthesis of nano-TiCN: A review

A Rajabi, P Hodgson, M Ghazali, Z Sajuri, A Almaslow, H Mehrabi, A Baghdadi

(2022), Vol. 48, pp. 8921-8929, Ceramics International, Amsterdam, The Netherlands, C1

Evolution of phase constitution with mechanical alloying and spark plasma sintering of nanocrystalline Al xCoCrFeNi (x = 0, 0.3, 0.6, 1 mol) high-entropy alloys

R Bhattacharya, M Annasamy, P Cizek, M Kamaraj, G Muralikrishna, P Hodgson, D Fabijanic, B Murty

(2022), Vol. 37, pp. 959-975, Journal of Materials Research, C1

The influence of parent austenite characteristics on the intervariant boundary network in a lath martensitic steel

A Mirzaei, R Ghaderi, P Hodgson, X Ma, G Rohrer, H Beladi

(2022), Vol. 57, pp. 8904-8923, Journal of Materials Science, Berlin, Germany, C1

Effect of in-situ layer-by-layer rolling on the microstructure, mechanical properties, and corrosion resistance of a directed energy deposited 316L stainless steel

W Kan, D Jiang, M Humbert, X Gao, V Bhatia, G Proust, Y Zhu, P Hodgson, A Huang

(2022), Vol. 55, pp. 102863-102863, Additive Manufacturing, Amsterdam, The Netherlands, C1

On the propensity of lath martensite intervariant boundaries to hydrogen absorption using molecular statics simulation

A Mirzaei, C Barrett, X Ma, P Hodgson, H Beladi

(2022), Vol. 25, Materialia, C1

Low-Temperature Superplastic Deformation of Cold-Rolled Fe-5.6Mn-1.1Al-0.2C Steel

H Zhang, M Cai, W Zhu, S Sun, H Yan, S Yao, Y Luan, S Tang, P Hodgson

(2022), Vol. 53, pp. 3869-3880, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

Ultrastrong nanotwinned titanium alloys through additive manufacturing

Y Zhu, K Zhang, Z Meng, K Zhang, P Hodgson, N Birbilis, M Weyland, H Fraser, S Lim, H Peng, R Yang, H Wang, A Huang

(2022), Vol. 21, pp. 1258-1262, Nature Materials, England, C1

Improving creep property of additively manufactured Inconel 718 through specifically-designed post heat treatments

S Wu, H Peng, X Gao, P Hodgson, H Song, Y Zhu, Y Tian, A Huang

(2022), Vol. 857, Materials Science and Engineering A, C1

Achieving high ductility in a 1.4 GPa grade medium Mn lightweight TRIP/TWIP steel with hierarchical lamellar structure

S Sun, M Cai, H Ding, H Yan, Y Tian, S Tang, P Hodgson

(2022), Vol. 858, Materials Science and Engineering A, C1

A comprehensive experimental and numerical study of foldover onset and growth during the barrelling compression test

S Khoddam, M Mansourinejad, B Mirzakhani, P Hodgson, A Taylor

(2022), Vol. 14, pp. 168781322211438-168781322211438, Advances in Mechanical Engineering, C1

The effects of a ferritic or martensitic matrix on the tensile behavior of a nano-precipitation strengthened ultra-low carbon Ti-Mo-Nb steel

M Cai, L Chen, K Fang, H Huang, P Hodgson

(2021), Vol. 801, Materials Science and Engineering A, C1

Microstructure effects on the material behaviour of magnesium sheet in bending dominated forming

S Desinghege, P Hodgson, M Weiss

(2021), Vol. 289, Journal of Materials Processing Technology, C1

Interphase precipitation hardening of a TiMo microalloyed dual-phase steel produced by continuous cooling

J Wang, H Beladi, L Pan, F Fang, J Hu, L Kong, P Hodgson, I Timokhina

(2021), Vol. 804, Materials Science and Engineering A, C1

Precipitation reactions in 12Cr-3Ni-3Mn-3Cu-0.15Nb steel

V Govindaraj, P Hodgson, R P Singh, H Beladi

(2021), Vol. 808, Materials Science and Engineering A, C1

Effect of Surface Roughness on Hydrodynamic Characteristics of an Impinging Droplet

R Singh, P Hodgson, N Sen, S Das

(2021), Vol. 37, pp. 3038-3048, Langmuir, Washington, DC, C1

Nano/micro plastics - Challenges on quantification and remediation: A review

M Enfrin, C Hachemi, P Hodgson, V Jegatheesan, J Vrouwenvelder, D Callahan, J Lee, L Dumée

(2021), Vol. 42, Journal of Water Process Engineering, C1

The effect of post-processing heat treatment on the microstructure, residual stress and mechanical properties of selective laser melted 316L stainless steel

Q Chao, S Thomas, N Birbilis, P Cizek, P Hodgson, D Fabijanic

(2021), Vol. 821, Materials Science and Engineering: A, C1

The role of thermomechanical processing routes on the grain boundary network of martensite in Ti-6Al-4V

E Farabi, V Tari, P Hodgson, G Rohrer, A Rollett, H Beladi

(2021), Vol. 822, Materials Science and Engineering A, C1

Nanoparticle-mediated ultra grain refinement and reinforcement in additively manufactured titanium alloys

Q Chao, S Mateti, M Annasamy, M Imran, J Joseph, Q Cai, L Li, P Cizek, P Hodgson, Y Chen, D Fabijanic, W Xu

(2021), Vol. 46, Additive Manufacturing, C1

The Effect of Strain and Annealing on the Growth of NbC Precipitates During Two-Pass Hot Deformation of a Fe-30Ni-Nb Model Microalloyed Steel

D Poddar, P Cizek, H Beladi, P Hodgson

(2021), Vol. 52, pp. 4357-4367, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

Computational design of thermally stable and precipitation-hardened Al-Co-Cr-Fe-Ni-Ti high entropy alloys

J Joseph, M Senadeera, Q Chao, K Shamlaye, S Rana, S Gupta, S Venkatesh, P Hodgson, M Barnett, D Fabijanic

(2021), Vol. 888, Journal of Alloys and Compounds, C1

Effect of manganese on the grain boundary network of lath martensite in precipitation hardenable stainless steels

V Govindaraj, E Farabi, S Kada, P Hodgson, R P Singh, G Rohrer, H Beladi

(2021), Vol. 886, Journal of Alloys and Compounds, C1

The Mechanical Properties of Low Alloy TRIP-Aided Steel: The Role of Retained Austenite

R Ranjan, H Beladi, P Hodgson, S Singh

(2021), Vol. 52, pp. 4649-4663, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

Tailoring the deformation characteristics of commercial purity titanium through hot deformation of a martensitic microstructure

Q Chao, I Sabirov, T Guo, P Hodgson, H Beladi

(2021), Vol. 827, Materials Science and Engineering A, C1

The effect of austenite reversion on the microstructure and mechanical properties of a 12Cr-3Ni-3Mn-3Cu-0.15Nb-0.05C maraging stainless steel

V Govindaraj, P Hodgson, R P Singh, H Beladi

(2021), Vol. 828, Materials Science and Engineering A, C1

Conversion of compression test data into flow curve, accounting for barrelling

Shahin Khoddam, Peter Hodgson

(2021), Vol. 21, Computer Methods in Material Science, C1

State of the art methods to post-process mechanical test data to characterize the hot deformation behavior of metals

S Khoddam, S Solhjoo, P Hodgson

(2021), Vol. 13, Advances in Mechanical Engineering, C1-1

Conversion of compression test data into flow curve, accounting for barrelling

Shahin Khoddam, Peter Hodgson

(2021), Vol. 21, pp. 1-6, Computer Methods in Materials Science, Krakow, Poland, C1

Hierarchical layered and refined grain structure of Inconel 718 superalloy produced by rolling-assisted directed energy deposition

Chen Li, Yang Tian, Yu Chen, Peter Hodgson, Xinhua Wu, Yuman Zhu, Aijun Huang

(2021), Vol. 1, pp. 1-7, Additive Manufacturing Letters, Amsterdam, The Netherlands, C1

Droplet oscillation mechanism and its free surface behavior on impacting a heated hydrophobic surface at low Weber numbers

R Singh, S Das, P Hodgson, N Sen

(2020), Vol. 77, pp. 13-32, Numerical heat transfer; part A: applications, Abingdon, Eng., C1

On the hot-worked microstructure of a face-centered cubic Al0.3CoCrFeNi high entropy alloy

N Haghdadi, S Primig, M Annasamy, P Cizek, P Hodgson, D Fabijanic

(2020), Vol. 178, pp. 144-149, Scripta Materialia, C1

Two-phase method of cultivating Coelastrella species for increased production of lipids and carotenoids

A Minhas, P Hodgson, C Barrow, A Adholeya

(2020), Vol. 9, pp. 1-7, Bioresource technology reports, Amsterdam, The Netherlands, C1

New insights into the interface characteristics of a duplex stainless steel subjected to accelerated ferrite-to-austenite transformation

N Haghdadi, P Cizek, P Hodgson, Y He, B Sun, J Jonas, G Rohrer, H Beladi

(2020), Vol. 55, pp. 5322-5339, Journal of Materials Science, Berlin, Germany, C1

Electrochemical studies on the effect of residual stress on the corrosion of 316L manufactured by selective laser melting

V Cruz, Q Chao, N Birbilis, D Fabijanic, P Hodgson, S Thomas

(2020), Vol. 164, Corrosion Science, C1

EBSD Investigation to Study the Restoration Mechanism and Substructural Characteristics of 23Cr-6Ni-3Mo Duplex Stainless Steel During Post-deformation Annealing

P Kumar, P Hodgson, H Beladi, M Makhatha, A Dutt

(2020), Vol. 73, pp. 1421-1431, Transactions of the Indian Institute of Metals, Berlin, Germany, C1

Dynamic recrystallization in AlXCoCrFeNi duplex high entropy alloys

N Haghdadi, S Primig, M Annasamy, P Cizek, P Hodgson, D Fabijanic

(2020), Vol. 830, Journal of Alloys and Compounds, C1

On the Degradation of Retained Austenite in Transformation Induced Plasticity Steel

I Timokhina, A Gazder, J Wang, I Bikmukhametov, P Hodgson, F Niessen, E Pereloma

(2020), Vol. 51, pp. 3802-3810, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

On the enhanced wear resistance of CoCrFeMnNi high entropy alloy at intermediate temperature

J Joseph, N Haghdadi, M Annasamy, S Kada, P Hodgson, M Barnett, D Fabijanic

(2020), Vol. 186, pp. 230-235, Scripta Materialia, Amsterdam, The Netherlands, C1

Towards the large-scale production and strength prediction of near-eutectic AlxCoCrFeNi2.1 alloys by additive manufacturing

J Joseph, M Imran, P Hodgson, M Barnett, D Fabijanic

(2020), Vol. 25, pp. 16-20, Manufacturing Letters, C1

The effect of molybdenum on interphase precipitation at 700 °C in a strip-cast low-carbon niobium steel

L Jiang, R Marceau, T Dorin, K Wood, P Hodgson, N Stanford

(2020), Vol. 166, Materials Characterization, C1

Plastic instability and fracture of ultra-thin stainless-steel sheet

P Zhang, M Pereira, B Abeyrathna, B Rolfe, D Wilkosz, P Hodgson, M Weiss

(2020), Vol. 202, pp. 699-716, International Journal of Solids and Structures, Amsterdam, The Netherlands, C1

On the grain boundary network characteristics in a martensitic Ti-6Al-4V alloy

E Farabi, V Tari, P Hodgson, G Rohrer, H Beladi

(2020), Vol. 55, pp. 15299-15321, Journal of materials science, Cham, Switzerland, C1

Microalga Scenedesmus bijugus: Biomass, lipid profile, and carotenoids production in vitro

A Minhas, C Barrow, P Hodgson, A Adholeya

(2020), Vol. 142, Biomass and Bioenergy, C1

The role of phase transformation mechanism on the grain boundary network in a commercially pure titanium

E Farabi, V Tari, P Hodgson, G Rohrer, H Beladi

(2020), Vol. 169, Materials Characterization, C1

The effect of molybdenum on precipitation behaviour in austenite of strip-cast steels containing niobium

L Jiang, R Marceau, T Dorin, H Yin, X Sun, P Hodgson, N Stanford

(2020), Vol. 10, pp. 1-12, Metals, C1

Strain Hardening Behavior of Laminate Structure With Stable bcc/fcc Bimetal Interfaces

X Huang, Z Lu, M Cai, P Hodgson

(2020), Vol. 7, Frontiers in Materials, C1-1

In vivo person specific human body simulation for development and optimisation of surgical methods and materials

R Ahmad, P Hodgson, X Zhang, A Whan, K Negus

(2019), Vol. 7, pp. 317-335, Computer methods in biomechanics and biomedical engineering: imaging and visualization, Abingdon, Eng., C1

Transformation from cluster to nano-precipitate in microalloyed ferritic steel

J Wang, M Weyland, I Bikmukhametov, M Miller, P Hodgson, I Timokhina

(2019), Vol. 160, pp. 53-57, Scripta materialia, Amsterdam, The Netherlands, C1

The effect of phase transformation route on the intergranular corrosion susceptibility of 2205 duplex stainless steel

N Haghdadi, M Laleh, A Kosari, M Moayed, P Cizek, P Hodgson, H Beladi

(2019), Vol. 238, pp. 26-30, Materials letters, Amsterdam, The Netherlands, C1

Dynamic recrystallization behaviour of AlxCoCrFeNi high entropy alloys during high-temperature plane strain compression

M Annasamy, N Haghdadi, A Taylor, P Hodgson, D Fabijanic

(2019), Vol. 745, pp. 90-106, Materials Science and Engineering A, C1

A microstructural based constitutive approach for simulating hot deformation of Ti6Al4V alloy in the α + β phase region

P Souza, J Mendiguren, Q Chao, H Beladi, P Hodgson, B Rolfe

(2019), Vol. 748, pp. 30-37, Materials Science and Engineering A, C1

Microstructure dependence of impact toughness in duplex stainless steels

N Haghdadi, P Cizek, P Hodgson, H Beladi

(2019), Vol. 745, pp. 369-378, Materials Science and Engineering A, C1

The sliding wear behaviour of CoCrFeMnNi and AlxCoCrFeNi high entropy alloys at elevated temperatures

J Joseph, N Haghdadi, K Shamlaye, P Hodgson, M Barnett, D Fabijanic

(2019), Vol. 428-429, pp. 32-44, Wear, C1

The effect of strain on interphase precipitation characteristics in a Ti-Mo steel

I Bikmukhametov, H Beladi, J Wang, P Hodgson, I Timokhina

(2019), Vol. 170, pp. 75-86, Acta materialia, Amsterdam, The Netherlands, C1

Interface Formation in Copper-Steel Multilayered Sheets under Severe Shear Strain

A de Andrade Mendes Filho, A Molotnikov, P Hodgson, R Lapovok

(2019), Vol. 21, Advanced Engineering Materials, C1

Static recrystallization and grain growth behaviour of Al 0.3 CoCrFeNi high entropy alloy

M Annasamy, N Haghdadi, A Taylor, P Hodgson, D Fabijanic

(2019), Vol. 754, pp. 282-294, Materials Science and Engineering A, C1

The scratch behaviour of AlXCoCrFeNi (x=0.3 and 1.0) high entropy alloys

N Haghdadi, T Guo, A Ghaderi, P Hodgson, M Barnett, D Fabijanic

(2019), Vol. 428-429, pp. 293-301, Wear, C1

Microstructural evolution and mechanical properties of accumulative back extruded duplex (α + β) brass

E Farabi, A Zarei-Hanzaki, M Moghaddam, P Hodgson, H Beladi

(2019), Vol. 152, pp. 101-114, Materials Characterization, C1

Effect of initial microstructure and beta phase evolution on dynamic recrystallization behaviour of Ti6Al4V alloy - an EBSD based investigation

P Souza, P Hodgson, B Rolfe, R Singh, H Beladi

(2019), Vol. 793, pp. 467-479, Journal of alloys and compounds, Amsterdam, The Netherlands, C1

Effect of the eutectic Al-(Ce,La) phase morphology on microstructure, mechanical properties, electrical conductivity and heat resistance of Al-4.5(Ce,La) alloy after SPD and subsequent annealing

A Medvedev, M Murashkin, N Enikeev, I Bikmukhametov, R Valiev, P Hodgson, R Lapovok

(2019), Vol. 796, pp. 321-330, Journal of alloys and compounds, Amsterdam, The Netherlands, C1

Study of Nb non-equilibrium segregation at prior austenite grain boundary in welding using atom probe tomography and modeling

H Wang, Z Tong, J Wang, P Hodgson, I Timokhina

(2019), Vol. 54, pp. 11320-11327, Journal of materials science, New York, N.Y., C1

Experimental in-situ verification of the unloading mechanics of dual phase steels

A Kupke, L Madej, P Hodgson, M Weiss

(2019), Vol. 760, pp. 134-140, Materials Science and Engineering A, C1

Tailoring one-pass asymmetric rolling of extra low carbon steel for shear texture and recrystallization

S Dhinwal, L Toth, R Lapovok, P Hodgson

(2019), Vol. 12, Materials, Switzerland, C1

Abrasive Wear Resistance of Ferrous Microstructures with Similar Bulk Hardness Levels Evaluated by a Scratch-Tester Method

B Narayanaswamy, A Ghaderi, P Hodgson, P Cizek, Q Chao, M Safi, H Beladi

(2019), Vol. 50, pp. 4839-4850, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

A power-based approach to assess the barrelling test's weak solution

S Khoddam, S Solhjoo, P Hodgson

(2019), Vol. 161-162, International Journal of Mechanical Sciences, C1

The effect of molybdenum on clustering and precipitation behaviour of strip-cast steels containing niobium

L Jiang, R Marceau, B Guan, T Dorin, K Wood, P Hodgson, N Stanford

(2019), Vol. 8, Materialia, C1

Effect of copper on microstructure, recrystallization and precipitation kinetics in strip cast low carbon steel

P Sellamuthu, P Hodgson, N Stanford

(2019), Vol. 6, Materials Research Express, C1

Formation of ultrafine grained structure in plain carbon steels through thermomechanical processing

Hossein Beladi, Georgina Kelly, Peter Hodgson

(2019), Vol. 64, pp. 83-92, Zavarivanje i zavarene konstrukcije, Beograd, Serbia, C1-1

An environmentally friendly in situ plasma and anodization method to produce titanium dioxide nanotubes

A Ambujakshan, J Pringle, Z Chen, C Corr, J du Plessis, P Hodgson, X Dai

(2018), Vol. 15, Plasma Processes and Polymers, C1

Effect of High-Energy Ball Milling on Mechanical Properties of the Mg-Nb Composites Fabricated through Powder Metallurgy Process

A Vahid, P Hodgson, Y Li

(2018), Vol. 20, Advanced Engineering Materials, C1

Optimization of Strength-Electrical Conductivity Properties in Al-2Fe Alloy by Severe Plastic Deformation and Heat Treatment

A Medvedev, M Murashkin, N Enikeev, R Valiev, P Hodgson, R Lapovok

(2018), Vol. 20, Advanced Engineering Materials, C1

Effect of ferrite-to-austenite phase transformation path on the interface crystallographic character distributions in a duplex stainless steel

N Haghdadi, P Cizek, P Hodgson, V Tari, G Rohrer, H Beladi

(2018), Vol. 145, pp. 196-209, Acta materialia, Amsterdam, The Netherlands, C1

Effects of hot-deformation on grain boundary precipitation and segregation in Ti-Mo microalloyed steels

J Wang, P Hodgson, I Bikmukhametov, M Miller, I Timokhina

(2018), Vol. 141, pp. 48-56, Materials and design, Amsterdam, The Netherlands, C1

Precipitation and clustering in a Ti-Mo steel investigated using atom probe tomography and small-angle neutron scattering

S Dhara, R Marceau, K Wood, T Dorin, I Timokhina, P Hodgson

(2018), Vol. 718, pp. 74-86, Materials Science and Engineering A, C1

The Effect of Nb Micro-alloying on the Bainitic Phase Transformation Under Strip Casting Conditions

N Stanford, T Dorin, P Hodgson

(2018), Vol. 49, pp. 1021-1025, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

Five-parameter crystallographic characteristics of the interfaces formed during ferrite to austenite transformation in a duplex stainless steel

N Haghdadi, P Cizek, P Hodgson, V Tari, G Rohrer, H Beladi

(2018), Vol. 98, pp. 1284-1306, Philosophical magazine, Abingdon, Eng., C1

Enhancement of mechanical and electrical properties of Al-RE alloys by optimizing rare-earth concentration and thermo-mechanical treatment

A Medvedev, M Murashkin, N Enikeev, R Valiev, P Hodgson, R Lapovok

(2018), Vol. 745, pp. 696-704, Journal of alloys and compounds, Amsterdam, The Netherlands, C1

Microstructure Evolution and Mechanical Behavior of a CMnSiAl TRIP Steel Subjected to Partial Austenitization Along with Quenching and Partitioning Treatment

H Kong, Q Chao, M Cai, E Pavlina, B Rolfe, P Hodgson, H Beladi

(2018), Vol. 49, pp. 1509-1519, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

Enhanced tensile properties of a reversion annealed 6.5Mn-TRIP alloy via tailoring initial microstructure and cold rolling reduction

M Cai, H Huang, J Su, H Ding, P Hodgson

(2018), Vol. 34, pp. 1428-1435, Journal of materials science and technology, Amsterdam, The Netherlands, C1

Atom probe tomography data analysis procedure for precipitate and cluster identification in a Ti-Mo steel

S Dhara, R Marceau, K Wood, T Dorin, I Timokhina, P Hodgson

(2018), Vol. 18, pp. 968-982, Data in Brief, Netherlands, C1

Advancing mechanics of barrelling compression test

S Khoddam, P Hodgson

(2018), Vol. 122, pp. 1-8, Mechanics of materials, Amsterdam, The Netherlands, C1

Bulk Hexagonal Boron Nitride with a Quasi-Isotropic Thermal Conductivity

S Mateti, K Yang, X Liu, S Huang, J Wang, L Li, P Hodgson, M Zhou, J He, Y Chen

(2018), Vol. 28, Advanced Functional Materials, C1

Five-parameter intervariant boundary characterization of martensite in commercially pure titanium

E Farabi, P Hodgson, G Rohrer, H Beladi

(2018), Vol. 154, pp. 147-160, Acta materialia, Amsterdam, The Netherlands, C1

An Analysis on the Constitutive Models for Forging of Ti6Al4V Alloy Considering the Softening Behavior

P Souza, H Beladi, R Singh, P Hodgson, B Rolfe

(2018), Vol. 27, pp. 3545-3558, Journal of Materials Engineering and Performance, C1

Latest Developments in Modeling and Characterization of Joining Metal Based Hybrid Materials

S Khoddam, L Tian, T Sapanathan, P Hodgson, A Zarei-Hanzaki

(2018), Vol. 20, Advanced Engineering Materials, C1

Global assessment of biomass suitability for ironmaking - opportunities for co-location of sustainable biomass, iron and steel production and supportive policies

H Mandova, W Gale, A Williams, A Heyes, P Hodgson, K Miah

(2018), Vol. 27, pp. 23-39, Sustainable energy technologies and assessments, Amsterdam, The Netherlands, C1-1

Effect of hot isostatic pressing on the microstructure and mechanical properties of additive manufactured AlxCoCrFeNi high entropy alloys

J Joseph, P Hodgson, T Jarvis, X Wu, N Stanford, D Fabijanic

(2018), Vol. 733, pp. 59-70, Materials Science and Engineering A, C1

Effects of processing conditions on texture and microstructure evolution in extra-low carbon steel during multi-pass asymmetric rolling

S Dhinwal, L Toth, P Hodgson, A Haldar

(2018), Vol. 11, Materials, Switzerland, C1

Modelling discontinuous dynamic recrystallization using a quantitative multi-order-parameter phase-field method

N Xiao, P Hodgson, B Rolfe, D Li

(2018), Vol. 155, pp. 298-311, Computational materials science, Amsterdam, The Netherlands, C1

Short review on porous metal membranes-Fabrication, commercial products, and applications

B Zhu, M Duke, L Dumée, A Merenda, E des Ligneris, L Kong, P Hodgson, S Gray

(2018), Vol. 8, Membranes, Switzerland, C1

Enhancement of Mechanical and Electrical Properties in Al 6101 Alloy by Severe Shear Strain under Hydrostatic Pressure

A Medvedev, M Murashkin, V Kazykhanov, R Valiev, A Medvedev, P Hodgson, R Lapovok

(2018), Vol. 20, Advanced Engineering Materials, C1

Characterization of Nb Interface Segregation During Welding Thermal Cycle in Microalloyed Steel by Atom Probe Tomography

H Wang, J Wang, Z Tong, P Hodgson, X Wan, K Wu, R Wei, I Timokhina

(2018), Vol. 49, pp. 6224-6230, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

An in-situ small angle x ray scattering analysis of nanopore formation during thermally induced chemical dealloying of brass thin foils

B Lin, M Döbeli, S Mudie, A Hawley, P Hodgson, L Kong, R Spolenak, L Dumée

(2018), Vol. 8, Scientific Reports, England, C1

Local deformation in roll forming

B Abeyrathna, B Rolfe, P Hodgson, M Weiss

(2017), Vol. 88, pp. 2405-2415, International journal of advanced manufacturing technology, London, Eng., C1

Clustering and precipitation processes in a ferritic titanium-molybdenum microalloyed steel

S Mukherjee, I Timokhina, C Zhu, S Ringer, P Hodgson

(2017), Vol. 690, pp. 621-632, Journal of Alloys and Compounds, C1

Interfacial reactions between titanium and boron nitride nanotubes

M Bhuiyan, L Li, J Wang, P Hodgson, Y Chen

(2017), Vol. 127, pp. 108-112, Scripta materialia, Amsterdam, The Netherlands, C1

Substructure induced twinning in low density steel

H Abedi, A Hanzaki, N Haghdadi, P Hodgson

(2017), Vol. 128, pp. 69-73, Scripta Materialia, Oxford, Eng., C1

Tension/compression asymmetry in additive manufactured face centered cubic high entropy alloy

J Joseph, N Stanford, P Hodgson, D Fabijanic

(2017), Vol. 129, pp. 30-34, Scripta materialia, Amsterdam, The Netherlands, C1

Static Softening in a Ni-30Fe Austenitic Model Alloy After Hot Deformation: Microstructure and Texture Evolution

H Beladi, P Cizek, A Taylor, G Rohrer, P Hodgson

(2017), Vol. 48, pp. 855-867, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

Continuous dynamic recrystallization in low density steel

H Abedi, A Zarei Hanzaki, Z Liu, R Xin, N Haghdadi, P Hodgson

(2017), Vol. 114, pp. 55-64, Materials and Design, C1

A novel high-strain-rate ferrite dynamic softening mechanism facilitated by the interphase in the austenite/ferrite microstructure

N Haghdadi, P Cizek, H Beladi, P Hodgson

(2017), Vol. 126, pp. 44-57, Acta materialia, Amsterdam, The Netherlands, C1

Reinforced magnesium composites by metallic particles for biomedical applications

A Vahid, P Hodgson, Y Li

(2017), Vol. 685, pp. 349-357, Materials Science and Engineering A, C1

On the crystallographic characteristics of nanobainitic steel

H Beladi, V Tari, I Timokhina, P Cizek, G Rohrer, A Rollett, P Hodgson

(2017), Vol. 127, pp. 426-437, Acta materialia, Amsterdam, The Netherlands, C1

Controlled porosity and pore size of nano-porous gold by thermally assisted chemical dealloying - a SAXS study

B Lin, L Kong, P Hodgson, S Mudie, A Hawley, L Dumée

(2017), Vol. 7, pp. 10821-10830, RSC Advances, C1

The austenite microstructure evolution in a duplex stainless steel subjected to hot deformation

N Haghdadi, P Cizek, H Beladi, P Hodgson

(2017), Vol. 97, pp. 1209-1237, Philosophical magazine, Abingdon, Eng., C1

Insights into Free Volume Variations across Ion-Exchange Membranes upon Mixed Solvents Uptake by Small and Ultrasmall Angle Neutron Scattering

F Allioux, C Garvey, C Rehm, B Tardy, R Dagastine, P Hodgson, L Kong, L Dumée

(2017), Vol. 9, pp. 8704-8713, ACS Applied Materials and Interfaces, United States, C1

Plasma treated water - A promising electrolyte to produce nanoporous titanium dioxide nanotubes

A Ambujakshan, A Sadek, K Magniez, S Mateti, E Mayes, G Devi, J Pringle, J Plessis, Z Chen, C Corr, P Hodgson, X Dai

(2017), Vol. 14, Plasma Processes and Polymers, C1

Austenite-ferrite interface crystallography dependence of sigma phase precipitation using the five-parameter characterization approach

N Haghdadi, D Abou-Ras, P Cizek, P Hodgson, A Rollett, H Beladi

(2017), Vol. 196, pp. 264-268, Materials Letters, C1

Thermal stability of an ultrafine grained Ti-6Al-4V alloy during post-deformation annealing

Q Chao, P Hodgson, H Beladi

(2017), Vol. 694, pp. 13-23, Materials Science and Engineering A, C1

The effect of microstructure and pre-strain on the change in apparent Young's modulus of a dual-phase steel

A Kupke, P Hodgson, M Weiss

(2017), Vol. 26, pp. 3387-3398, Journal of materials engineering and performance, New York, N.Y., C1

Buckling in low pressure tube hydroforming

C Nikhare, M Weiss, P Hodgson

(2017), Vol. 28, pp. 1-10, Journal of Manufacturing Processes, C1

A New Horizon for Barreling Compression Test: Exponential Profile Modeling

M Fardi, R Abraham, P Hodgson, S Khoddam

(2017), Vol. 19, Advanced Engineering Materials, C1

New porous Mg composites for bone implants

A Vahid, P Hodgson, Y Li

(2017), Vol. 724, pp. 176-186, Journal of Alloys and Compounds, C1

The nitrocarburising response of low temperature bainite steel

D Fabijanic, I Timokhina, H Beladi, P Hodgson

(2017), Vol. 7, Metals, C1

Strain rate dependence of ferrite dynamic restoration mechanism in a duplex low-density steel

N Haghdadi, A Zarei-Hanzaki, E Farabi, P Cizek, H Beladi, P Hodgson

(2017), Vol. 132, pp. 360-366, Materials and Design, London, Eng, C1

Microstructure and tensile properties of a Nb-Mo microalloyed 6.5Mn alloy processed by intercritical annealing and quenching and partitioning

M Cai, H Huang, H Pan, S Sun, H Ding, P Hodgson

(2017), Vol. 30, pp. 665-674, Acta metallurgica sinica (English letters), Cham, Switzerland, C1

Dynamic Restoration Processes in a 23Cr-6Ni-3Mo Duplex Stainless Steel: Effect of Austenite Morphology and Interface Characteristics

N Haghdadi, P Cizek, H Beladi, P Hodgson

(2017), Vol. 48, pp. 4803-4820, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

Effect of Severe Plastic Deformation and Subsequent Silicon Spheroidizing Treatment on the Microstructure and Mechanical Properties of an Al-Si-Mg Alloy

N Haghdadi, A Zarei-Hanzaki, M Kawasaki, A Phillion, P Hodgson

(2017), Vol. 19, Advanced Engineering Materials, C1

On the enhanced corrosion resistance of a selective laser melted austenitic stainless steel

Q Chao, V Cruz, S Thomas, N Birbilis, P Collins, A Taylor, P Hodgson, D Fabijanic

(2017), Vol. 141, pp. 94-98, Scripta materialia, Amsterdam, The Netherlands, C1

Superior performance of plasma treated water as an anodizing electrolyte for producing nanoporous titanium dioxide nanotubes

A Ambujakshan, J Pringle, C Corr, Z Chen, J du Plessis, P Hodgson, X Dai

(2017), Vol. 14, Plasma Processes and Polymers, C1-1

Role of shear in interface formation of aluminium-steel multilayered composite sheets

A Mendes, I Timokhina, A Molotnikov, P Hodgson, R Lapovok

(2017), Vol. 705, pp. 142-152, Materials Science and Engineering A, C1

Understanding the mechanical behaviour and the large strength/ductility differences between FCC and BCC AlxCoCrFeNi high entropy alloys

J Joseph, N Stanford, P Hodgson, D Fabijanic

(2017), Vol. 726, pp. 885-895, Journal of alloys and compounds, Amsterdam, The Netherlands, C1

One-step quenching and partitioning treatment of a commercial low silicon boron steel

H Kong, Q Chao, M Cai, E Pavlina, B Rolfe, P Hodgson, H Beladi

(2017), Vol. 707, pp. 538-547, Materials Science and Engineering A, C1

Hot deformation and restoration mechanisms in duplex stainless steels: Effect of strain rate

N Haghdadi, P Cizek, H Beladi, P Hodgson

(2017), Vol. 109, pp. 5-16, Metallurgia Italiana, C1

Direct laser deposition cladding of AlxCoCrFeNi high entropy alloys on a high-temperature stainless steel

Q Chao, T Guo, T Jarvis, X Wu, P Hodgson, D Fabijanic

(2017), Vol. 332, pp. 440-451, Surface and coatings technology, Amsterdam, The Netherlands, C1

Boron nitride nanotube reinforced titanium metal matrix composites with excellent high-temperature performance

M Bhuiyan, J Wang, L Li, P Hodgson, A Agarwal, M Qian, Y Chen

(2017), Vol. 32, pp. 3744-3752, Journal of materials research, Cambridge, Eng., C1

The Effect of Microphases on Elongation of Nanostructured Bainitic Steels

H Feng, W Kaiming, H Ting-ping, H Peter, I Rodionova, Zh Fu-cheng

(2017), Vol. 60, pp. 1295-1300, Metallurgist, Berlin, Germany, C1-1

Strontium content and collagen-I coating of Magnesium-Zirconia-Strontium implants influence osteogenesis and bone resorption

D Mushahary, C Wen, J Kumar, R Sravanthi, P Hodgson, G Pande, Y Li

(2016), Vol. 27, pp. e15-e24, Clinical Oral Implants Research, Denmark, C1

A first step towards a simple in-line shape compensation routine for the roll forming of high strength steel

B Abeyrathna, B Rolfe, P Hodgson, M Weiss

(2016), Vol. 9, pp. 423-434, International Journal of Material Forming, Melbourne, AUSTRALIA, C1

An extension of the flower pattern diagram for roll forming

B Abeyrathna, B Rolfe, P Hodgson, M Weiss

(2016), Vol. 83, pp. 1683-1695, International Journal of Advanced Manufacturing Technology, C1

Microstructure and Texture Evolution During Symmetric and Asymmetric Rolling of a Martensitic Ti-6Al-4V Alloy

Q Chao, P Hodgson, H Beladi

(2016), Vol. 47, pp. 531-545, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

Prediction of ductile failure in CP-Titanium as criterion of SPD process design

R Lapovok, V Mendoza, V Anumalasetty, P Hodgson

(2016), Vol. 229, pp. 678-686, Journal of materials processing technology, Amsterdam, The Netherlands, C1

Enhanced mechanical response of an ultrafine grained Ti-6A1-4V alloy produced through warm symmetric and asymmetric rolling

Q Chao, P Cizek, J Wang, P Hodgson, H Beladi

(2016), Vol. 650, pp. 404-413, Materials Science and Engineering A, C1

Dependence of deformation behavior on grain size and strain rate in an ultrahigh strength-ductile Mn-based TRIP alloy

M Cai, W Zhu, N Stanford, L Pan, Q Chao, P Hodgson

(2016), Vol. 653, pp. 35-42, Materials Science and Engineering A, C1

An inverse routine to predict residual stress in sheet material

A Abvabi, B Rolfe, P Hodgson, M Weiss

(2016), Vol. 652, pp. 99-104, Materials Science and Engineering A, C1

Anodization parameters influencing the morphology and electrical properties of TiO2 nanotubes for living cell interfacing and investigations

D Khudhair, A Bhatti, Y Li, H Hamedani, H Garmestani, P Hodgson, S Nahavandi

(2016), Vol. 59, pp. 1125-1142, Materials Science and Engineering C, Netherlands, C1

Inner architecture of bonded splats under combined high pressure and shear

S Khoddam, T Sapanathan, S Zahiri, P Hodgson, A Zarei-Hanzaki, R Ibrahim

(2016), Vol. 18, pp. 501-505, Advanced engineering materials, Chichester, Eng., C1

β-Ti Grain Refinement Via α-Precipitation

A Ghaderi, P Hodgson, M Barnett

(2016), Vol. 47, pp. 1322-1330, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

Quantitative examination of carbide and sulphide precipitates in chemically complex steels processed by direct strip casting

T Dorin, K Wood, A Taylor, P Hodgson, N Stanford

(2016), Vol. 112, pp. 259-268, Materials characterization, Amsterdam, The Netherlands, C1

Strain gradients in Cu-Fe thin films and multilayers during micropillar compression

J Wang, C Yang, P Hodgson

(2016), Vol. 651, pp. 146-154, Materials Science and Engineering A, C1

Constitutive modelling of high strength titanium alloy Ti-6Al-4 V for sheet forming applications at room temperature

O Badr, F Barlat, B Rolfe, M Lee, P Hodgson, M Weiss

(2016), Vol. 80, pp. 334-347, International journal of solids and structures, Oxford, Eng., C1

Comparisons of the two-body abrasive wear behaviour of four different ferrous microstructures with similar hardness levels

B Narayanaswamy, P Hodgson, H Beladi

(2016), Vol. 350-351, pp. 155-165, Wear, Amsterdam, The Netherlands, C1

Effect of retained austenite on wear resistance of nanostructured dual phase steels

F Hu, K Wu, P Hodgson

(2016), Vol. 32, pp. 40-48, Materials science and technology, Abingdon, Eng., C1

Effect of particle characteristics on the two-body abrasive wear behaviour of a pearlitic steel

B Narayanaswamy, P Hodgson, H Beladi

(2016), Vol. 354-355, pp. 41-52, Wear, Amsterdam, The Netherlands, C1

Formation of nanoscale titanium carbides in ferrite: an atomic study

Y Lv, P Hodgson, L Kong, W Gao

(2016), Vol. 122, Applied Physics A: Materials Science and Processing, C1

The isolation and identification of new microalgal strains producing oil and carotenoid simultaneously with biofuel potential

A Minhas, P Hodgson, C Barrow, B Sashidhar, A Adholeya

(2016), Vol. 211, pp. 556-565, Bioresource technology, Amsterdam, The Netherlands, C1

The influence of fine ferrite formation on the γ/α interface, fine bainite and retained austenite in a thermomechanically-processed transformation induced plasticity steel

I Timokhina, M Miller, H Beladi, P Hodgson

(2016), Vol. 31, pp. 806-818, Journal of Materials Research, C1

Effect of ultra fast cooling on the alloy cost reduction of the X80 pipeline steel

F Zhou, K Wu, C Zhang, O Isayev, P Hodgson

(2016), Vol. 87, pp. 511-518, Steel research international, Chichester, Eng., C1

A simple model for material's strengthening under high pressure torsion

S Khoddam, P Hodgson, A Zarei-Hanzaki, L Yan Foon

(2016), Vol. 99, pp. 335-340, Materials and Design, C1

Growth of bainitic ferrite and carbon partitioning during the early stages of bainite transformation in a 2 mass% silicon steel studied by in situ neutron diffraction, TEM and APT

I Timokhina, K Liss, D Raabe, K Rakha, H Beladi, X Xiong, P Hodgson

(2016), Vol. 49, pp. 399-414, Journal of Applied Crystallography, C1

Molecular dynamics approach to the structural characterization and transport properties of poly(acrylonitrile)/N,N-dimethylformamide solutions

W Gao, F She, J Zhang, L Dumee, K Tung, P Hodgson, L Kong

(2016), Vol. 219, pp. 45-53, Journal of molecular liquids, Amsterdam, The Netherlands, C1

A review on the assessment of stress conditions for simultaneous production of microalgal lipids and carotenoids

A Minhas, P Hodgson, C Barrow, A Adholeya

(2016), Vol. 7, Frontiers in Microbiology, Switzerland, C1

Effect of coiling treatment on microstructural development and precipitate strengthening of a strip cast steel

T Dorin, K Wood, A Taylor, P Hodgson, N Stanford

(2016), Vol. 115, pp. 167-177, Acta materialia, Amsterdam, The Netherlands, C1

Microstructure characteristics of the (111) oriented grains in a Fe-30Ni-Nb model austenitic steel deformed in hot uniaxial compression

D Poddar, P Cizek, H Beladi, P Hodgson

(2016), Vol. 118, pp. 382-396, Materials characterization, Amsterdam< The Netherlands, C1

Physically-based constitutive modelling of hot deformation behavior in a LDX 2101 duplex stainless steel

N Haghdadi, D Martin, P Hodgson

(2016), Vol. 106, pp. 420-427, Materials and design, Amsterdam, The Netherlands, C1

The Impact of Retained Austenite Characteristics on the Two-Body Abrasive Wear Behavior of Ultrahigh Strength Bainitic Steels

B Narayanaswamy, P Hodgson, I Timokhina, H Beladi

(2016), Vol. 47, pp. 4883-4895, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

Temperature-dependent flow behavior and microstructural evolution during compression of as-cast Mg-7.7Al-0.4Zn

R Kulkarni, N Prabhu, P Hodgson, B Kashyap

(2016), Vol. 25, pp. 4145-4156, Journal of materials engineering and performance, New York, N.Y., C1

Insights into surface interactions between metal organic frameworks and gases during transient adsorption and diffusion by in-situ small angle x-ray scattering

L Dumée, L He, P Hodgson, L Kong

(2016), Vol. 6, Membranes, Switzerland, C1

On the Ti-Mo-Fe-C atomic clustering during interphase precipitation in the Ti-Mo steel studied by advanced microscopic techniques

I Timokhina, M Miller, J Wang, H Beladi, P Cizek, P Hodgson

(2016), Vol. 111, pp. 222-229, Materials and design, Amsterdam, The Netherlands, C1

Complex precipitation phenomena in strip cast steels with high sulfur and copper contents

T Dorin, A Taylor, K Wood, J Wang, P Hodgson, N Stanford

(2016), Vol. 49, pp. 1777-1785, Journal of Applied Crystallography, C1

Dynamic re-crystallization of low carbon steel in plain strain condition

P Kumar, M Banerjee, P Hodgson, A Choudhury

(2016), Vol. 5, pp. 160-163, International journal of mechanical engineering and robotics research, [Unknown], C1

Simulation of Multipass Hot Rolling for 7050 Aluminum Alloys

Yang An, Peter Hodgson, Chun Yang

(2016), Vol. 846, pp. 145-150, Applied Mechanics and Materials, Zurich, Switzerland, C1

Forming of high strength titanium sheet at room temperature

O Badr, B Rolfe, P Hodgson, M Weiss

(2015), Vol. 66, pp. 618-626, Materials and Design, C1

The effect of simulated thermomechanical processing on the transformation behavior and microstructure of a low-carbon Mo-Nb linepipe steel

P Cizek, B Wynne, C Davies, P Hodgson

(2015), Vol. 46, pp. 407-425, Metallurgical and materials transactions A: physical metallurgy and materials science, New York, NY, C1

Towards integrated anti-microbial capabilities: Novel bio-fouling resistant membranes by high velocity embedment of silver particles

L Dumee, L He, P King, M Moing, I Güller, M Duke, P Hodgson, S Gray, A Poole, L Kong

(2015), Vol. 475, pp. 552-561, Journal of membrane science, Amsterdam, The Netherlands, C1

Microstructures, mechanical and corrosion properties and biocompatibility of as extruded Mg-Mn-Zn-Nd alloys for biomedical applications

Y Zhou, Y Li, D Luo, Y Ding, P Hodgson

(2015), Vol. 49, pp. 93-100, Materials science and engineering: C, Amsterdam, The Netherlands, C1

Mechanical Behavior of Nano-crystalline Metallic Thin Films and Multilayers Under Microcompression

J Wang, C Yang, P Hodgson

(2015), Vol. 46, pp. 1405-1412, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

Growth of nano-textured graphene coatings across highly porous stainless steel supports towards corrosion resistant coatings

L Dumee, L He, Z Wang, P Sheath, J Xiong, C Feng, M Tan, F She, M Duke, S Gray, A Pacheco, P Hodgson, M Majumder, L Kong

(2015), Vol. 87, pp. 395-408, Carbon, C1

Comparative study of the microstructures and mechanical properties of direct laser fabricated and arc-melted AlxCoCrFeNi high entropy alloys

J Joseph, T Jarvis, X Wu, N Stanford, P Hodgson, D Fabijanic

(2015), Vol. 633, pp. 184-193, Materials science and engineering: A, Amsterdam, The Netherlands, C1

Investigation of hybrid ion-exchange membranes reinforced with non-woven metal meshes for electro-dialysis applications

F-M Allioux, L He, F She, P Hodgson, L Kong, L Dumee

(2015), Vol. 147, pp. 353-363, Separation and purification technology, Amsterdam, The Netherlands, C1

Thermo-mechanical processing of TRIP-aided steels

R Ranjan, H Beladi, S Singh, P Hodgson

(2015), Vol. 46, pp. 3232-3247, Metallurgical and materials transactions a: physical metallurgy and materials science, New York, N.Y., C1

Understanding water and ion transport behaviour and permeability through poly(amide) thin film composite membrane

W Gao, F She, J Zhang, L Dumée, L He, P Hodgson, L Kong

(2015), Vol. 487, pp. 32-39, Journal of Membrane Science, C1

Microstructure and texture evolution during tensile deformation of symmetric/asymmetric-rolled low carbon microalloyed steel

M Cai, X Wei, B Rolfe, P Hodgson

(2015), Vol. 641, pp. 297-304, Materials science and engineering A, Amsterdam, The Netherlands, C1

Epitaxial growth of multi-structure sno2 by chemical vapor deposition

D He, P Hodgson, W-M Gao

(2015), Vol. 28, pp. 946-950, Acta metallurgica sinica (English Letters), New York, N. Y., C1

Micromechanical modelling of bending under tension forming behaviour of dual phase steel 600

X Wei, S Asgari, J Wang, B Rolfe, H Zhu, P Hodgson

(2015), Vol. 108, pp. 72-79, Computational materials science, Amsterdam, The Netherlands, C1

The need to revise the current methods to measure and assess static recrystallization behavior

S Khoddam, P Hodgson

(2015), Vol. 89, pp. 85-97, Mechanics of materials, Amsterdam, The Netherlands, C1

Study of growth mechanism of TiC cluster in ferrite via molecular dynamics simulation

Y Lv, P Hodgson, L Kong, W Gao

(2015), Vol. 159, pp. 389-391, Materials letters, Amsterdam, The Netherlands, C1

On the Bauschinger effect in dual phase steel at high levels of strain

M Weiss, A Kupke, P Manach, L Galdos, P Hodgson

(2015), Vol. 643, pp. 127-136, Materials science and engineering A, Amsterdam, The Netherlands, C1

Effect of twinning on microstructural evolution during dynamic recrystallisation of hot deformed as-cast austenitic stainless steel

A Guria, G Mandal, P Hodgson, J Beynon, S Chowdhury

(2015), Vol. 46, pp. 4423-4428, Metallurgical and materials transactions a, New York, N.Y., C1

The influence of residual stress on a roll forming process

A Abvabi, B Rolfe, P Hodgson, M Weiss

(2015), Vol. 101-102, pp. 124-136, International journal of mechanical sciences, Amsterdam, The Netherlands, C1

The evolution of microbands and their interaction with NbC precipitates during hot deformation of a Fe-30Ni-Nb model austenitic steel

D Poddar, P Cizek, H Beladi, P Hodgson

(2015), Vol. 99, pp. 347-362, Acta materialia, Amsterdam, The Netherlands, C1

Constitutive analysis of hot deformation behavior of a Ti6Al4V alloy using physical based model

P Souza, H Beladi, R Singh, B Rolfe, P Hodgson

(2015), Vol. 648, pp. 265-273, Materials science and engineering A, Amsterdam, The Netherlands, C1

Differential top-antitop cross-section measurements as a function of observables constructed from final-state particles using pp collisions at √s = 7 TeV in the ATLAS detector

The ATLAS collaboration, G Aad, B Abbott, J Abdallah, S Abdel Khalek, O Abdinov, R Aben, B Abi, M Abolins, O AbouZeid, H Abramowicz, H Abreu, R Abreu, Y Abulaiti, B Acharya, L Adamczyk, D Adams, J Adelman, S Adomeit, T Adye, T Agatonovic-Jovin, J Aguilar-Saavedra, M Agustoni, S Ahlen, F Ahmadov, G Aielli, H Akerstedt, T Åkesson, G Akimoto, A Akimov, G Alberghi, J Albert, S Albrand, M Alconada Verzini, M Aleksa, I Aleksandrov, C Alexa, G Alexander, G Alexandre, T Alexopoulos, M Alhroob, G Alimonti, L Alio, J Alison, B Allbrooke, L Allison, P Allport, A Aloisio, A Alonso, F Alonso, C Alpigiani, A Altheimer, B Alvarez Gonzalez, M Alviggi, K Amako, Y Amaral Coutinho, C Amelung, D Amidei, S Amor Dos Santos, A Amorim, S Amoroso, N Amram, G Amundsen, C Anastopoulos, L Ancu, N Andari, T Andeen, C Anders, G Anders, K Anderson, A Andreazza, V Andrei, X Anduaga, S Angelidakis, I Angelozzi, P Anger, A Angerami, F Anghinolfi, A Anisenkov, N Anjos, A Annovi, M Antonelli, A Antonov, J Antos, F Anulli, M Aoki, L Aperio Bella, G Arabidze, Y Arai, J Araque, A Arce, F Arduh, J Arguin, S Argyropoulos, M Arik, A Armbruster, O Arnaez, V Arnal, H Arnold, M Arratia

(2015), Vol. 2015, Journal of High Energy Physics, C1-1

Orientation dependence of the deformation microstructure in a Fe-30Ni-Nb model austenitic steel subjected to hot uniaxial compression

D Poddar, P Cizek, H Beladi, P Hodgson

(2015), Vol. 46, pp. 5933-5951, Metallurgical and materials transactions A, New York, N.Y., C1

Effect of cooling rate on phase transformations in a high-strength low-alloy steel studied from the liquid phase

T Dorin, N Stanford, A Taylor, P Hodgson

(2015), Vol. 46a, pp. 5561-5571, Metallurgical and materials transactions a: physical metallurgy and materials science, New York, N.Y., C1

Computational inverse analysis of static recrystallization kinetics

S Khoddam, P Hodgson, H Beladi

(2015), Vol. 103, pp. 97-103, International journal of mechanical sciences, Amsterdam, The Netherlands, C1

Aqueous corrosion performance of nanostructured bainitic steel

O Kazum, K Bobby, H Beladi, I Timokhina, P Hodgson, S Khoddam

(2014), Vol. 54, pp. 67-71, Materials and design, Amsterdam, The Netherlands, C1

On low temperature bainite transformation characteristics using in-situ neutron diffraction and atom probe tomography

K Rakha, H Beladi, I Timokhina, X Xiong, S Kabra, K Liss, P Hodgson

(2014), Vol. 589, pp. 303-309, Materials science & engineering A, Amsterdam, The Netherlands, C1

The distribution of intervariant crystallographic planes in a lath martensite using five macroscopic parameters

H Beladi, G Rohrer, A Rollett, V Tari, P Hodgson

(2014), Vol. 63, pp. 86-98, Acta materialia, Amsterdam, The Netherlands, C1

Fabrication of Ti-Nb-Ag alloy via powder metallurgy for biomedical applications

M Wen, C Wen, P Hodgson, Y Li

(2014), Vol. 56, pp. 629-634, Materials and design, Amsterdam, The Netherlands, C1

Enhancing the electrochemical performance of the LiMn2O4 hollow microsphere cathode with a LiNi0.5Mn1.5O4 coated layer

W Liu, J Liu, K Chen, S Ji, Y Wan, Y Zhou, D Xue, P Hodgson, Y Li

(2014), Vol. 20, pp. 824-830, Chemistry : a European journal, London, England, C1

Fabrication, modelling and evaluation of microstructured materials in a digital framework

C Yang, Y An, M Tort, P Hodgson

(2014), Vol. 81, pp. 89-97, Computational materials science, Amsterdam, The Netherlands, C1

An experimental investigation of edge strain and bow in roll forming a V-section

B Abeyrathna, B Rolfe, P Hodgson, M Weiss

(2014), Vol. 773-774, pp. 153-159, Materials science forum, Durnten-Zurich, Switzerland, C1

Investigating the effect of segregation of particles and pressure gradient on the quality of fluidisation at sub-atmospheric pressures

A Kumar, P Hodgson, W Gao, S Das, D Fabijanic

(2014), Vol. 254, pp. 137-149, Powder technology, Amsterdam, The Netherlands, C1

Collagen type-I leads to in vivo matrix mineralization and secondary stabilization of Mg-Zr-Ca alloy implants

D Mushahary, C Wen, J Kumar, J Lin, N Harishankar, P Hodgson, G Pande, Y Li

(2014), Vol. 122, pp. 719-728, Colloids and Surfaces B : Biointerfaces, Amsterdam, Netherlands, C1

Improvement of the biomedical properties of titanium using SMAT and thermal oxidation

M Wen, C Wen, P Hodgson, Y Li

(2014), Vol. 116, pp. 658-665, Colloids and surfaces B: biointerfaces, Amsterdam, The Netherlands, C1

Ti-SrO metal matrix composites for bone implant materials

Y Wang, C Wong, C Wen, P Hodgson, Y Li

(2014), Vol. 2, pp. 5854-5861, Journal of Materials Chemistry B, London, Eng., C1

Effects of alloying elements on the corrosion behavior and biocompatibility of biodegradable magnesium alloys: A review

Y Ding, C Wen, P Hodgson, Y Li

(2014), Vol. 2, pp. 1912-1933, Journal of Materials Chemistry B, England, C1

Characterization of structure and energy of TixCy cluster at early formation stage in iron matrix by molecular dynamics

Y Lv, P Hodgson, L Kong, W Gao

(2014), Vol. 608, pp. 40-44, Chemical physics letters, Amsterdam, Netherlands, C1

Single step preparation of meso-porous and reduced graphene oxide by gamma-ray irradiation in gaseous phase

L Dumée, C Feng, L He, Z Yi, F She, Z Peng, W Gao, C Banos, J Davies, C Huynh, S Hawkins, M Duke, S Gray, P Hodgson, L Kong

(2014), Vol. 70, pp. 313-318, Carbon, London, England, C1

Grain growth and β-Mg17Al12 intermetallic phase dissolution during heat treatment and its impact on deformation behavior of AZ80 Mg-alloy

P Palai, N Prabhu, P Hodgson, B Kashyap

(2014), Vol. 23, pp. 77-82, Journal of materials engineering and performance, Berlin, Germany, C1

Improved contact load-bearing capacity of ultra-fine grained titanium : Multilayering and grading

D Yang, J Wang, D Fabijanic, J Lu, P Hodgson

(2014), Vol. 58, pp. 217-225, Materials and Design, Amsterdam, The Netherlands, C1

Strain partitioning in dual-phase steels containing tempered martensite

Q Han, A Asgari, P Hodgson, N Stanford

(2014), Vol. 611, pp. 90-99, Materials Science and Engineering A, C1

Ultrafine grain formation in a Ti-6Al-4V alloy by thermomechanical processing of a martensitic microstructure

Q Chao, P Hodgson, H Beladi

(2014), Vol. 45, pp. 2659-2671, Metallurgical and materials transactions a: physical metallurgy and materials science, New York, N.Y., C1

Acceleration of the super bainite transformation through a coarse austenite grain size

F Hu, P Hodgson, K Wu

(2014), Vol. 122, pp. 240-243, Materials letters, Amsterdam, The Netherlands, C1

Roll-formability of cryo-rolled ultrafine aluminium sheet

J Marnette, M Weiss, P Hodgson

(2014), Vol. 63, pp. 471-478, Materials and design, London, England, C1

Deformation behaviour of a commercial pure titanium alloy during hot compression testing

Q Chao, H Beladi, I Sabirov, P Hodgson

(2014), Vol. 773-774, pp. 281-286, Materials Science Forum, Stafa-Zurich, Switzerland, C1

Refinement of retained austenite in super-bainitic steel by a deep cryogenic treatment

F Hu, K Wu, P Hodgson, A Shirzadi

(2014), Vol. 54, pp. 222-226, ISIJ International, Tokyo, Japan, C1

The development of ultrafine-grained hot rolling products using advanced thermomechanical processing

K Muszka, D Dziedzic, L Madej, J Majta, P Hodgson, E Palmiere

(2014), Vol. 610, pp. 290-296, Materials science and engineering A, Amsterdam, The Netherlands, C1

A Novel Mo and Nb Microalloyed Medium Mn TRIP Steel with Maximal Ultimate Strength and Moderate Ductility

M Cai, Z Li, Q Chao, P Hodgson

(2014), Vol. 45, pp. 5624-5634, Metallurgical and materials transactions A: Physical metallurgy and materials science, New York, NY, C1

Surface wrinkling of the twinning induced plasticity steel during the tensile and torsion tests

S Khoddam, H Beladi, P Hodgson, A Zarei-Hanzaki

(2014), Vol. 60, pp. 146-152, Materials and Design, Amsterdam, The Netherlands, C1

Evolution of strain-induced precipitates in a model austenitic Fe-30Ni-Nb steel and their effect on the flow behaviour

D Poddar, P Cizek, H Beladi, P Hodgson

(2014), Vol. 80, pp. 1-15, Acta Materialia, Amsterdam, The Netherlands, C1

Numerical investigation of influence of the Martensite Volume Fraction on dp steels fracture behavior on the basis of digital material representation model

K Perzyński, Ł Madej, J Wang, R Kuziak, P Hodgson

(2014), Vol. 45, pp. 5852-5865, Metallurgical and materials transactions A, Berlin, Germany, C1

Microstructure evolution of martensitic Ti-6Al-4V alloy during warm deformation

Q Chao, P Hodgson, H Beladi

(2014), Vol. 783-786, pp. 679-684, Materials Science Forum, Stafa-Zurich, Switzerland, C1

Kinetics of γ-Mg17Al12 phase dissolution and its effect on room temperature tensile properties in as-cast AZ80 magnesium alloy

R Kulkarni, N Prabhu, P Hodgson, B Kashyap

(2014), Vol. 209, pp. 207-211, Solid state phenomena, Stafa-Zurich, Switzerland, C1

The formation of complex microstructures after different deformation modes in advanced high-strength steels

I Timokhina, E Pereloma, P Hodgson

(2014), Vol. 45, pp. 4247-4256, Metallurgical and materials transactions A, Berlin, Germany, C1

Effect of temperature on mechanical behaviour of high manganese TWIP steel

V Shterner, I Timokhina, H Beladi, P Hodgson

(2014), Vol. 773-774, pp. 257-262, Materials science forum, Zurich, Switzerland, C1

Digital material representation and testing of metal foams

C Yang, Y An, M Tort, P Hodgson

(2014), Vol. 553, pp. 54-59, Applied mechanics and materials, Stafa-Zurich, Switzerland, C1

A study on bending behaviours of aluminium foam-filled tubes

Y An, C Yang, P Hodgson

(2014), Vol. 620, pp. 413-416, Applied mechanics and materials, Pfaffikon, Switzerland, C1

Analytical model to locate the fluidisation interface in a solid-gas vacuum fluidised bed

A Kumar, P Hodgson, D Fabijanic, W Gao, S Das

(2014), Vol. 266, pp. 463-474, Powder technology, Amsterdam, Netherlands, C1

Fabrication of meso-porous sintered metal thin films by selective etching of silica based sacrificial template

Ludovic Dumee, Fenghua She, Mikel Duke, Stephen Gray, Peter Hodgson, Lingxue Kong

(2014), Vol. 4, pp. 686-699, Nanomaterials, Basel, Switzerland, C1

Numerical modeling of dual phase microstructure behavior under deformation conditions on the basis of digital material representation

L Madej, J Wang, K Perzynski, P Hodgson

(2014), Vol. 95, pp. 651-662, Computational Materials Science, C1

Microstructure modeling and prediction of the mechanical properties of advanced high strength steels

A Asgari, B Rolfe, P Hodgson

(2014), Vol. 11, pp. 1-11, International journal of computational methods, Singapore, C1

A comprehensive method to identify the kinetics of static recrystallization using the hot torsion test results with an inverse solution

S Khoddam, P Hodgson

(2014), Vol. 22, pp. 1-1, Modelling and simulation in materials science and engineering, Bristol, Eng., C1

High-efficient production of boron nitride nanosheets via an optimized ball milling process for lubrication in oil

Deepika, L Li, A Glushenkov, S Hait, P Hodgson, Y Chen

(2014), Vol. 4, pp. 1-6, Scientific reports, London, Eng., C1

Qualitative spectroscopic characterization of the matrix-silane coupling agent interface across metal fibre reinforced ion exchange resin composite membranes

L Dumée, F-M Allioux, R Reis, M Duke, S Gray, M Tobin, L Puskar, L He, P Hodgson, L Kong

(2014), Vol. 75, pp. 203-212, Vibrational Spectroscopy, Amsterdam, The Netherlands, C1

Impact of the de-alloying kinetics and alloy microstructure on the final morphology of de-alloyed meso-porous metal films

Bao Lin, Lingxue Kong, Peter Hodgson, Ludovic Dumee

(2014), Vol. 4, pp. 856-878, Nanomaterials, Basel, Switzerland, C1

A theoretical study of the structure-property relations in ultra-fine metallic materials with fractal microstructures

I Sabirov, C Yang, J Mullins, P Hodgson

(2013), Vol. 559, pp. 543-548, Materials science and engineering A, Lausanne, Switzerland, C1

Finite element analysis of plastic deformation in variable lead axisymmetric forward spiral extrusion

A Farhoumand, P Hodgson, S Khoddam

(2013), Vol. 48, pp. 2454-2461, Journal of materials science, Berlin, Germany, C1

Microstructures, mechanical properties and in vitro corrosion behaviour of biodegradable Mg-Zr-Ca alloys

Y Zhou, Y Li, D Luo, C Wen, P Hodgson

(2013), Vol. 48, pp. 1632-1639, Journal of materials science, Berlin, Germany, C1

Ti-based amorphous/nanocrystal composite with high ductility and strain-hardening

D Yang, J Wang, D Fabijanic, P Cizek, B Li, J Lu, P Hodgson

(2013), Vol. 560, pp. 339-342, Materials science and engineering A, Amsterdam, The Netherlands, C1

Preparation and evaluation of hydrophobically modified core shell calcium carbonate structure by different capping agents

Deepika, S Hait, J Christopher, Y Chen, P Hodgson, D Tuli

(2013), Vol. 235, pp. 581-589, Powder technology, Amsterdam, The Netherlands, C1

The role of shear banding on the fatigue ductility of ultrafine-grained aluminium

S Malekjani, P Hodgson, N Stanford, T Hilditch

(2013), Vol. 68, pp. 269-272, Scripta materialia, Amsterdam, The Netherlands, C1

Tough ultrafine-grained Ti through multilayering and grading

D Yang, P Hodgson

(2013), Vol. 68, pp. 309-312, Scripta materialia, Amsterdam, The Netherlands, C1

Correlation of tensile test properties with those predicted by the shear punch test

P Sellamuthu, P Collins, P Hodgson, N Stanford

(2013), Vol. 47, pp. 258-266, Materials and design, Amsterdam, The Netherlands, C1

Work hardening in ultrafine-grained titanium : multilayering and grading

D Yang, P Cizek, D Fabijanic, J Wang, P Hodgson

(2013), Vol. 61, pp. 2840-2852, Acta materialia, Amsterdam, The Netherlands, C1

Facile synthesis of NiCo2O4 nanorod arrays on Cu conductive substrates as superior anode materials for high-rate Li-ion batteries

J Liu, C Liu, Y Wan, W Li, Z Ma, S Ji, J Wang, Y Zhou, P Hodgson, Y Li

(2013), Vol. 15, pp. 1578-1585, CrystEngComm, Cambridge, England, C1

Mild and cost-effective synthesis of iron fluoride-graphene nanocomposites for high-rate Li-ion battery cathodes

J Liu, Y Wan, W Liu, Z Ma, S Ji, J Wang, Y Zhou, P Hodgson, Y Li

(2013), Vol. 1, pp. 1969-1975, Journal of materials chemistry A, Cambridge, England, C1

Shear bands evolution in ultrafine-grained aluminium under cyclic loading

S Malekjani, P Hodgson, N Stanford, T Hilditch

(2013), Vol. 68, pp. 821-824, Scripta materialia, Amsterdam, The Netherlands, C1

Static recrystallization of strip cast alloys in the presence of complex nano-sulfide and nitride precipitates

S Malekjani, I Timokhina, J Wang, P Hodgson, N Stanford

(2013), Vol. 581, pp. 39-47, Materials science and engineering A, Amsterdam, The Netherlands, C1

Gram-scale and template-free synthesis of ultralong tin disulfide nanobelts and their lithium ion storage performances

J Wang, J Liu, H Xu, S Ji, J Wang, Y Zhou, P Hodgson, Y Li

(2013), Vol. 1, pp. 1117-1122, Journal of materials chemistry A, Cambridge, England, C1

Microstructural characteristics of a nanoeutectic Ag-Cu alloy processed by surface mechanical attrition treatment

M Wen, P Cizek, C Wen, P Hodgson, Y Li

(2013), Vol. 68, pp. 499-502, Scripta materialia, Amsterdam, The Netherlands, C1

Multiple pass axi-symmetrical forward spiral extrusion of interstitial-free (IF) steel

A Farhoumand, P Hodgson, S Khoddam, X Fang

(2013), Vol. 579, pp. 217-225, Materials science and engineering A, Amsterdam, The Netherlands, C1

Quantitative measurement of strain partitioning and slip systems in a dual-phase steel

Q Han, Y Kang, P Hodgson, N Stanford

(2013), Vol. 69, pp. 13-16, Scripta materialia, Amsterdam, The Netherlands, C1

Electrospun spinel LiNi0.5Mn1.5O4 hierarchical nanofibers as 5 v cathode materials for lithium-ion batteries

J Liu, W Liu, S Ji, Y Zhou, P Hodgson, Y Li

(2013), Vol. 78, pp. 636-641, ChemPlusChem, London, England, C1

Static recrystallisation study of as-cast austenitic stainless steel

G Mandal, N Stanford, P Hodgson, J Beynon

(2013), Vol. 576, pp. 118-125, Materials science and engineering A, Amsterdam, The Netherlands, C1

Three-dimensional atom probe microscopy study of interphase precipitation and nanoclusters in thermomechanically treated titanium-molybdenum steels

S Mukherjee, I Timokhina, C Zhu, S Ringer, P Hodgson

(2013), Vol. 61, pp. 2521-2530, Acta materialia, Amsterdam, The Netherlands, C1

Asymmetric rolling of interstitial-free steel using differential roll diameters. Part I : mechanical properties and deformation textures

D Orlov, A Pougis, R Lapovok, L Toth, I Timokhina, P Hodgson, A Haldar, D Bhattacharjee

(2013), Vol. 44, pp. 4346-4359, Metallurgical and materials transactions A, Berlin, Germany, C1

Cell biological responses of osteoblasts on anodized nanotubular surface of a titanium-zirconium alloy

S Sista, A Nouri, Y Li, C Wen, P Hodgson, G Pande

(2013), Vol. 101, pp. 3416-3430, Journal of biomedical materials research - Part A, London, England, C1

Expression of cell adhesion and differentiation related genes in MC3T3 osteoblasts plated on titanium alloys : role of surface properties

S Sista, C Wen, P Hodgson, G Pande

(2013), Vol. 33, pp. 1573-1582, Materials science and engineering C, Amsterdam, The Netherlands, C1

Recrystallization of 304SS during and after high strain rate deformation

A Taylor, P Hodgson

(2013), Vol. 753, pp. 403-406, Materials science forum, Stafa-Zurich, Switzerland, C1

On the low temperature strain aging of bainite in the TRIP steel

I Timokhina, H Beladi, X Xiong, P Hodgson

(2013), Vol. 44, pp. 5177-5191, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Berlin, Germany, C1

Biocompatibility of TiO2 nanotubes with different topographies

Y Wang, C Wen, P Hodgson, Y Li

(2013), Vol. 102, pp. 743-751, Journal of biomedical materials research : part A, London, England, C1

Strength and biaxial formability of cryo-rolled 2024 aluminium subject to concurrent recovery and precipitation

M Weiss, A Taylor, P Hodgson, N Stanford

(2013), Vol. 61, pp. 5278-5289, Acta materialia, Amsterdam, The Netherlands, C1

Fracture mechanics of stainless steel foams

S Kashef, A Asgari, T Hilditch, W Yan, V Goel, P Quadbeck, P Hodgson

(2013), Vol. 578, pp. 115-124, Materials science and engineering : A, Amsterdam, The Netherlands, C1

Effect of substructure characteristics on the dislocation annihilation process during post-deformation annealing

H Beladi, P Cizek, A Taylor, P Hodgson

(2013), Vol. 753, pp. 76-79, Materials science forum, Stafa-Zurich, Switzerland, C1

Gradient ultrafine ferrite and martensite structure and its tensile properties by asymmetric rolling in low carbon microalloyed steel

M Cai, S Dhinwal, Q Han, Q Chao, P Hodgson

(2013), Vol. 583, pp. 205-209, Materials Science and Engineering : A, Amsterdam, The Netherlands, C1

Orientation dependence of the substructure characteristics in a Ni- 30%Fe austenitic alloy deformed in hot torsion

P Cizek, H Beladi, A Taylor, P Hodgson

(2013), Vol. 753, pp. 54-57, Materials science forum, Stafa-Zurich, Switzerland, C1

Microstructure and texture development in Ti-5Al-5Mo- 5V-3Cr alloy during cold rolling and annealing

A Ghaderi, P Hodgson, M Barnett

(2013), Vol. 551, pp. 210-216, Key engineering materials, Stafa-Zurich, Switzerland, C1

Development of an inverse routine to predict residual stresses in the material based on a bending test

A Abvabi, B Rolfe, P Hodgson, M Weiss

(2013), Vol. 554-557, pp. 949-956, Key engineering materials, Stafa-Zurich, Switzerland, C1

On the deformation mechanism of ultrafine-grained titanium with multilayered hierarchical structure

D Yang, P Cizek, D Fabijanic, P Hodgson

(2013), Vol. 582, pp. 162-169, Materials science and engineering A, Amsterdam, The Netherlands, C1

Multiscale microstructure engineering of steels

P Hodgson, I Timokhina, H Beladi

(2013), Vol. 29, pp. 1152-1157, Materials science and technology, Leeds, England, C1

Atomic scale investigation of solutes and precipitates in high strength steels

P Hodgson, S Mukherjee, H Beladi, X Xiong, I Timokhina

(2013), Vol. 762, pp. 14-21, Materials science forum, Stafa-Zurich, Switzerland, C1

Cryo-rolling and formability of 2024 aluminium

A Taylor, M Weiss, T Hilditch, P Hodgson, N Stanford

(2013), Vol. 765, pp. 434-438, Materials science forum, Stafa-Zurich, Switzerland, C1

Extrinsic size effect in microcompression of polycrystalline Cu/Fe multilayers

J Wang, C Yang, P Hodgson

(2013), Vol. 69, pp. 626-629, Scripta materialia, Amsterdam, The Netherlands, C1

Characterization of carbon nanotube webs and yarns with small angle X-ray scattering : revealing the yarn twist and inter-nanotube interactions and alignment

L Dumee, K Sears, S Mudie, N Kirby, C Skourtis, J Mcdonnell, S Lucas, J Schutz, N Finn, C Huynh, S Hawkins, L Kong, P Hodgson, M Duke, S Gray

(2013), Vol. 63, pp. 562-592, Carbon, Amsterdam, The Netherlands, C1

Bubble-wall interaction for asymmetric injection of jets in solid-gas fluidized bed

A Kumar, S Das, D Fabijanic, W Gao, P Hodgson

(2013), Vol. 101, pp. 56-68, Chemical Engineering Science, Amsterdam, The Netherlands, C1

Facile synthesis of transition-metal oxide nanocrystals embedded in hollow carbon microspheres for high-rate lithium-ion-battery anodes

J Liu, W Liu, K Chen, S Ji, Y Zhou, Y Wan, D Xue, P Hodgson, Y Li

(2013), Vol. 19, pp. 9811-9816, Chemistry : a European journal, London, England, C1

Zirconium, calcium, and strontium contents in magnesium based biodegradable alloys modulate the efficiency of implant-induced osseointegration

D Mushahary, R Sravanthi, Y Li, M Kumar, N Harishankar, P Hodgson, C Wen, G Pande

(2013), Vol. 8, pp. 2887-2902, International journal of nanomedicine, Auckland, New Zealand, C1

Asymmetric rolling of interstitial-free steel using differential roll diameters. Part II : microstructure and annealing effects

D Orlov, R Lapovok, L Toth, I Timokhina, P Hodgson, A Haldar, D Bhattacharjee

(2013), Vol. 45, pp. 447-454, Metallurgical and materials transactions A, Berlin, Germany, C1

Seeded growth of ZIF-8 on the surface of carbon nanotubes towards self-supporting gas separation membranes

L Dumee, L He, M Hill, B Zhu, M Duke, J Schutz, F She, H Wang, S Gray, P Hodgson, L Kong

(2013), Vol. 1, pp. 9208-9214, Journal of materials chemistry A, Cambridge, England, C1

A novel thermomechanical approach to produce a fine ferrite and low-temperature bainitic composite microstructure

H Beladi, I Timokhina, X Xiong, P Hodgson

(2013), Vol. 61, pp. 7240-7250, Acta materialia, Amsterdam, The Netherlands, C1

The fabrication and surface functionalization of porous metal frameworks : a review

L Dumee, L He, B Lin, F Ailloux, J Lemoine, L Velleman, F She, M Duke, J Orbell, G Erskine, P Hodgson, S Gray, L Kong

(2013), Vol. 1, pp. 15185-15206, Journal of materials chemistry A, Cambridge, England, C1

Selective dissolution of retained austenite in nanostructured bainitic steels

O Kazum, M Kannan, H Beladi, I Timokhina, P Hodgson, S Khoddam

(2013), Vol. 16, pp. 442-444, Advanced engineering materials, London, Eng., C1

One-pot facile synthesis of hierarchical hollow microspheres constructed with MnO2 nanotubes and their application in lithium storage and water treatment

J Wang, J Liu, Y Zhou, P Hodgson, Y Li

(2013), Vol. 3, pp. 25937-25943, RSC advances, Cambridge, England, C1

Castability and microstructural development of iron-based alloys under conditions pertinent to strip casting : specialty Fe-Cr-Al alloys

K Mukunthan, P Hodgson, P Sellamuthu, L Strezov, Y Durandet, N Stanford

(2013), Vol. 53, pp. 1803-1811, ISIJ international, Tokyo, Japan, C1

Recrystallization kinetic behavior of copper-bearing strip cast steel

P Sellamuthu, N Stanford, P Hodgson

(2013), Vol. 84, pp. 1273-1280, Steel research international, London, England, C1

Solidification behaviour and microstructural development of ironbased alloys under conditions pertinent to strip casting - 200 series stainless steels

K Mukunthan, P Hodgson, L Strezov, N Stanford

(2013), Vol. 53, pp. 2152-2159, ISIJ international, Tokyo, Japan, C1

Experimental study into the correlation between the incremental forming and the nature of springback in automotive steels

O Badr, B Rolfe, P Hodgson, M Weiss

(2013), Vol. 47, pp. 150-161, International journal of materials and product technology, Geneva, Switzerland, C1

Effect of silicon on ultra-low temperature toughness of Nb-Ti microalloyed cryogenic pressure vessel steels

J Qiu, K Wu, J Li, P Hodgson, T Hou, Q Ding

(2013), Vol. 83, pp. 123-128, Materials characterization, Philadelphia, Pa., C1

Microstructure evolution and softening processes occurring during annealing of hot deformed Ni-30Fe austenite

P Hodgson, P Cizek, H Beladi, A Taylor

(2012), Vol. 706-709, pp. 2134-2139, Materials science forum, Stafa-Zurich, Switzerland, C1

Modelling post-deformation softening kinetics of 304 austenitic stainless steel using cellular automata

N Yazdipour, P Hodgson

(2012), Vol. 54, pp. 56-65, Computational materials science, Amsterdam, Netherlands, C1

Morphology evolution during annealing and electrical conductivity of titania nanotube films

J Xiong, Y Wang, Y An, M Wen, Y Ding, Y Li, P Hodgson

(2012), Vol. 399-401, pp. 548-551, Advanced materials research, Stafa-Zurich, Switzerland, C1

Osteoblast cell response to nanoscale SiO2/ZrO2 particulate-reinforced titanium composites and scaffolds by powder metallurgy

Y Li, C Han, X Zhu, C Wen, P Hodgson

(2012), Vol. 47, pp. 4410-4414, Journal of materials science, Secaucus, N. J., C1

Role of microstructure in the low cycle fatigue of multi-phase steels

T Hilditch, H Beladi, P Hodgson, N Stanford

(2012), Vol. 534, pp. 288-296, Materials science and engineering : A, Lausanne, Switzerland, C1

Texture evolution and softening processes in an austenitic Ni-30Fe alloy subjected to hot deformation and subsequent annealing

P Hodgson, P Cizek, A Taylor, H Beladi

(2012), Vol. 702-703, pp. 435-438, Materials science forum, Stafa-Zurich, Switzerland, C1

The formation of ultrafine ferrite and low temperature bainite through thermomechanical processing

H Beladi, I Timokhina, P Hodgson

(2012), Vol. 706-709, pp. 2047-2052, Materials science forum, Stafa-Zurich, Switzerland, C1

Tribological behaviour of pure Ti with a nanocrystalline surface layer under different loads

M Wen, C Wen, P Hodgson, Y Li

(2012), Vol. 45, pp. 59-66, Tribology letters, New York, N. Y., C1

Asymmetric rolling of interstitial-free steel using one idle roll

R Lapovok, D Orlov, I Timokhina, A Pougis, L Toth, P Hodgson, A Haldar, D Bhattacharjee

(2012), Vol. 43, pp. 1328-1340, Metallurgical and materials transactions A, New York, N. Y., C1

Biodegradable Mg-Zr-Ca alloys for bone implant materials

Y Li, C Wong, C Wen, P Hodgson

(2012), Vol. 27, pp. 49-51, Materials technology, Leeds, U. K., C1

Impact response and energy absorption of aluminium foam-filled tubes

Y An, C Wen, P Hodgson, C Yang

(2012), Vol. 152-154, pp. 436-439, Applied mechanics and materials, Stafa-Zurich, Switzerland, C1

Comparison of bending of automotive steels in roll forming and in a V-die

M Weiss, J Marnette, P Wolfram, J Larranaga, P Hodgson

(2012), Vol. 504-506, pp. 797-802, Key engineering materials, Stafa-Zurich, Switzerland, C1

Development of asymmetric rolling for the better control over structure and mechanical properties in IF steel

D Orlov, R Lapovok, L Toth, I Timokhina, P Hodgson, D Bhattacharjee, A Haldar

(2012), Vol. 706-709, pp. 2788-2793, Materials science forum, Stafa-Zurich, Switzerland, C1

Effect of bake-hardening treatment on the mechanical properties of high strength bainitic steel produced by thermomechanical processing

I Timokhina, H Beladi, X Xiong, P Hodgson

(2012), Vol. 706-709, pp. 2332-2337, Materials science forum, Stafa-Zurich, Switzerland, C1

Effect of residual stress on the bending of aluminium

M Weiss, B Rolfe, P Hodgson, C Yang

(2012), Vol. 212, pp. 877-883, Journal of materials processing technology, Lausanne, Switzerland, C1

Effects of mechanical properties on the contact profile in Berkovich nanoindentation of elastoplastic materials

J Wang, P Hodgson, C Yang

(2012), Vol. 27, pp. 313-319, Journal of materials research, New York, N.Y., C1

Investigation of cell shape effect on the mechanical behaviour of open-cell metal foams

Y An, C Wen, P Hodgson, C Yang

(2012), Vol. 55, pp. 1-9, Computational materials science, Amsterdam, The Netherlands, C1

Thermal oxidation behaviour of bulk titanium with nanocrystalline surface layer

M Wen, C Wen, P Hodgson, Y Li

(2012), Vol. 59, pp. 352-359, Corrosion science, Amsterdam, The Netherlands, C1

Substructure and texture characteristics of the deformed matrix and dynamically recrystallized grains in a Ni-30%Fe austenitic alloy

P Cizek, H Beladi, P Hodgson

(2012), Vol. 715-716, pp. 180-185, Materials science forum, Stafa-Zurich, Switzerland, C1

New insights into the dynamic and metadynamic recrystallization of austenite

P Hodgson, P Cizek, H Beladi

(2012), Vol. 715-716, pp. 259-266, Materials science forum, Stafa-Zurich, Switzerland, C1

Mg-Zr-Sr alloys as biodegradable implant materials

Y Li, C Wen, D Mushahary, R Sravanthi, N Harishankar, G Pande, P Hodgson

(2012), Vol. 8, pp. 3177-3188, Acta biomaterialia, Amsterdam, The Netherlands, C1

Formability of cryo-rolled aluminium in uniaxial and biaxial tension

A Taylor, M Weiss, T Hilditch, N Stanford, P Hodgson

(2012), Vol. 555, pp. 148-153, Materials science and engineering A, Lausanne, Switzerland, C1

Orientation dependence of the substructure characteristics in a Ni-30Fe austenitic model alloy deformed in hot plane strain compression

A Taylor, P Cizek, P Hodgson

(2012), Vol. 60, pp. 1548-1569, Acta materialia, Oxford, England, C1

Preparation of titanium/strontia composite by powder metallurgy for biomedical application

Y Wang, C Wen, P Hodgson, Y Li

(2012), Vol. 520, pp. 248-253, Key engineering materials, Stafa-Zurich, Switzerland, C1

Numerical solution of gas-solid flow in fluidised bed at sub-atmospheric pressures

A Kumar, P Hodgson, D Fabijanic, W Gao

(2012), Vol. 23, pp. 485-492, Advanced powder technology, Amsterdam, The Netherlands, C1

Mechanical Property and Microstructure of Ti-Ta-Ag alloy for biomedical applications

M Wen, C Wen, P Hodgson, Y Li

(2012), Vol. 520, pp. 254-260, Key engineering materials, Stafa-Zurich, Switzerland, C1

Nanoscale SiO2/ZrO2 particulate-reinforced titanium composites for bone implant materials

Y Li, C Han, X Zhu, C Wen, P Hodgson

(2012), Vol. 520, pp. 242-247, Key engineering materials, Stafa-Zurich, Switzerland, C1

Strain rate effect on the cyclic deformation response of UFG Al alloys

S Malekjani, P Hodgson, P Cizek, T Hilditch

(2012), Vol. 548, pp. 69-74, Materials science and engineering A, Lausanne, Switzerland, C1

Effect of hot working on dynamic recrystallisation study of as-cast austenitic stainless steel

G Mandal, N Stanford, P Hodgson, J Beynon

(2012), Vol. 556, pp. 685-695, Materials science and engineering A, Lausanne, Switzerland, C1

Phase transformation and thermal structure stability of titania nanotube films with different morphologies

J Xiong, Y Wang, Y Li, P Hodgson

(2012), Vol. 526, pp. 116-119, Thin solid films, Amsterdam, The Netherlands, C1

Microstructures and mechanical properties of as cast Mg‐Zr‐Ca alloys for biomedical applications

Y Zhou, J An, D Luo, W Hu, Y Li, P Hodgson, C Wen

(2012), Vol. 27, pp. 52-54, Materials technology, Amsterdam, The Netherlands, C1

Microstructures and various properties of hot-extruded Mg-Zr-Ca alloys for biomedical applications

Y Zhou, D Luo, Y Li, C Wen, P Hodgson

(2012), Vol. 232, pp. 162-166, Applied mechanics and materials, Stafa-Zurich, Switzerland, C1

Atomic interaction of functionalized carbon nanotube-based nanofluids with a heating surface and its effect on heat transfer

W Gao, L Kong, P Hodgson

(2012), Vol. 55, pp. 5007-5015, International journal of heat and mass transfer, Amsterdam, The Netherlands, C1

Computational simulation of the influence of inert particles on incomplete combustion of methane at a low air factor

W Gao, L Kong, P Hodgson

(2012), Vol. 1, pp. 1-14, Materials performance and characterization, Conshohocken, Pa., C1

Microstructures and mechanical properties of hot-rolled Mg-Zr-Ca alloys for biomedical applications

Y Zhou, J An, D Luo, W Hu, Y Li, P Hodgson, C Wen

(2012), Vol. 5, pp. 898-900, Advanced science letters, Valencia, Calif., C1-1

A kinematics study of variable lead axisymmetric forward spiral extrusion

S Khoddam, A Farhoumand, P Hodgson

(2012), Vol. 550, pp. 167-175, Materials science and engineering A, Amsterdam, The Netherlands, C1-1

Experimental studies and modelling of the deformation behaviour of multiple nanolayers

J Wang, C Yang, P Hodgson

(2012), pp. 755-758, Steel research international, London, Eng., C1-1

Thermodynamics approach to the hydrogen diffusion and phase transformation in titanium particles

W Gao, W Li, J Zhou, P Hodgson

(2011), Vol. 509, pp. 2523-2529, Journal of alloys and compounds, Amsterdam, The Netherlands, C1

Development of adiabatic shear band in cold-rolled titanium

D Yang, Y An, P Cizek, P Hodgson

(2011), Vol. 528, pp. 3990-3997, Materials science and engineering : A, Amsterdam, The Netherlands, C1

Cyclic deformation response of UFG 2024 Al alloy

S Malekjani, P Hodgson, P Cizek, I Sabirov, T Hilditch

(2011), Vol. 33, pp. 700-709, International journal of fatigue, Oxford, U. K., C1

Cyclic deformation response of ultrafine pure Al

S Malekjani, P Hodgson, P Cizek, T Hilditch

(2011), Vol. 59, pp. 5358-5367, Acta materialia, Oxford, England, C1

Dynamic behaviour of 304 stainless steel during high Z deformation

A Taylor, P Hodgson

(2011), Vol. 528, pp. 3310-3320, Materials Science and Engineering A, Switzerland, C1

Effect of ball-milling time on the structural characteristics of biomedical porous Ti-Sn-Nb alloy

A Nouri, P Hodgson, C Wen

(2011), Vol. 31, pp. 921-928, Materials science and engineering c, Lausanne, Switzerland, C1

Effect of thermal treatment on the bending properties of pre-strained carbon steel

M Weiss, E Hemmerich, P Hodgson, B Rolfe

(2011), Vol. 528, pp. 4528-4536, Materials science and engineering A, Lausanne, Switzerland, C1

Fatigue crack growth behavior of titanium foams for medical applications

S Kashef, A Asgari, T Hilditch, W Yan, V Goel, P Hodgson

(2011), Vol. 528, pp. 1602-1607, Materials science and engineering a, Lausanne, Switzerland, C1

Interfacial chemistry and adhesion between titanium dioxide nanotube layers and titanium substrates

J Xiong, X Wang, Y Li, P Hodgson

(2011), Vol. 115, pp. 4768-4772, Journal of physical chemistry C, Washington, D. C., C1

Nanoscale microstructural characterization of a nanobainitic steel

I Timokhina, H Beladi, X Xiong, Y Adachi, P Hodgson

(2011), Vol. 59, pp. 5511-5522, Acta materialia, Oxford, U. K., C1

Necking and fracture of advanced high strength steels

C Nikhare, P Hodgson, M Weiss

(2011), Vol. 528, pp. 3010-3013, Materials science and engineering a, Lausanne, Switzerland, C1

New insight into the mechanism of metadynamic softening in austenite

H Beladi, P Cizek, P Hodgson

(2011), Vol. 59, pp. 1482-1492, Acta materialia, Oxford, U. K., C1

Synthesis and characterization of nanostructured Ag on porous titania

M Wen, Y Li, J Zhang, W Guan, Y Li, C Wen, P Hodgson

(2011), Vol. 257, pp. 4836-4843, Applied surface science, Elsevier BV, C1

The effect of pre-strain on the material behaviour and the Bauschinger effect in the bending of hot rolled and aged steel

E Hemmerich, B Rolfe, P Hodgson, M Weiss

(2011), Vol. 528, pp. 3302-3309, Materials science and engineering a, Lausanne, Switzerland, C1

The effects of calcium and yttrium additions on the microstructure, mechanical properties and biocompatibility of biodegradable magnesium alloys

Y Li, P Hodgson, C Wen

(2011), Vol. 46, pp. 365-371, Journal of materials science, Secaucus, N. J., C1

Three-dimensional atomic scale analysis of microstructures formed in high strength steels

I Timokhina, X Xiong, H Beladi, S Mukherjee, P Hodgson

(2011), Vol. 27, pp. 739-741, Materials science and technology, Leeds, U. K., C1

Ultrafine ferrite formation through isothermal static phase transformation

H Beladi, I Timokhina, S Mukherjee, P Hodgson

(2011), Vol. 59, pp. 4186-4196, Acta materialia, Oxford, U. K., C1

An inverse thermal-mechanical analysis of the hot torsion test for calibrating the constitutive parameters

S Khoddam, P Hodgson, M Bahramabadi

(2011), Vol. 32, pp. 1903-1909, Materials and design, Oxford, U. K., C1

Application of advanced analytical techniques to study structure-property relationship of hot rolled high strength low alloy steel

I Timokhina, P Hodgson, S Ringer, R Zheng, E Pereloma

(2011), Vol. 27, pp. 305-309, Materials science and technology, West Yorkshire, U. K., C1

Axi-symmetric forward spiral extrusion, a kinematic and experimental study

S Khoddam, A Farhoumand, P Hodgson

(2011), Vol. 528, pp. 1023-1029, Materials science and engineering A, Lausanne, Switzerland, C1

Comparison of 304 stainless steel and Ni-30 wt.% Fe as potential model alloys to study the behaviour of austenite during thermomechanical processing

A Taylor, P Cizek, P Hodgson

(2011), Vol. 59, pp. 5832-5844, Acta materialia, Oxford, U. K., C1

Microstructural characterization and mechanical properties of Mg-Zr-Ca alloys prepared by hot-extrusion for biomedical applications

Y Zhou, D Luo, W Hu, Y Li, P Hodgson, C Wen

(2011), Vol. 4, pp. 2860-2863, Advanced science letters, Valencia, Calif., C1

Particle dynamics and heat transfer at workpiece surface in heat treatment fluidised beds

W Gao, L Kong, F She, P Hodgson

(2011), Vol. 264-265, pp. 1456-1461, Advanced materials research, Stafa-Zurich, Switzerland, C1

The influence of surface energy of titanium-zirconium alloy on osteoblast cell functions in vitro

S Sista, C Wen, P Hodgson, G Pande

(2011), Vol. 97 A, pp. 27-36, Journal of biomedical materials research - part a, Hoboken, N. J., C1

The post-deformation recrystallization behaviour of 304 stainless steel following high strain rate deformation

A Taylor, P Hodgson

(2011), Vol. 529, pp. 164-169, Materials science and engineering A, Lausanne, Switzerland, C1

Understanding of the bainite transformation in a nano-structured bainitic steel

P Hodgson, I Timokhina, X Xiong, Y Adach, H Beladi

(2011), Vol. 172-174, pp. 123-128, Solid state phenomena, Uetikon-Zurich, Switzerland, C1

Upper-bound analysis of axi-symmetric forward spiral extrusion

S Khoddam, A Farhoumand, P Hodgson

(2011), Vol. 43, pp. 684-692, Mechanics of materials, Amsterdam, Netherlands, C1

Application of advanced experimental techniques for the microstructural characterization of nanobainitic steels

I Timokhina, H Beladi, X Xiong, Y Adachi, P Hodgson

(2011), Vol. 172-174, pp. 1249-1254, Solid state phenomena, Uetikon-Zurich, Switzerland, C1

Wear behaviour of pure Ti with a nanocrystalline surface layer

M Wen, C Wen, P Hodgson, Y Li

(2011), Vol. 66-68, pp. 1500-1504, Applied mechanics and materials, Stafa-Zurich, Switzerland, C1

Compressive properties of hot-rolled Mg-Zr-Ca alloys for biomedical applications

Y Zhou, D Luo, W Hu, Y Li, P Hodgson, C Wen

(2011), Vol. 197-198, pp. 56-59, Advanced materials research, Stafa-Zurich, Switzerland, C1

Effect of thermo-mechanical processing on precipitate formation in next generation HSLA steel

S Mukherjee, I Timokhina, C Zhu, S Ringer, P Hodgson

(2011), Vol. 18, pp. 478-481, Journal of iron and steel research international, [Beijing, China], C1

Finite element analysis of an axi-symmetric forward spiral extrusion of Mg-1.75Mn alloy

A Farhoumand, P Hodgson, S Khoddam

(2011), Vol. 690, pp. 173-176, Materials science forum, Lausanne, Switzerland, C1

In vitro behavior of human osteoblast-like cells (SaOS2) cultured on surface modified titanium and titanium-zirconium alloy

X Chen, Y Li, P Hodgson, C Wen

(2011), Vol. 31, pp. 1545-1552, Materials science and engineering : C, Lausanne, Switzerland, C1

Integral approach and numerical improvement to calculate carbon concentration profiles in carburising

W Gao, L Kong, P Hodgson

(2011), Vol. 264-265, pp. 1494-1499, Advanced materials research, Lausanne, Switzerland, C1

3-dimensional characterization of membrane with nanoporous structure using TEM tomography and image analysis

F She, K Nihara, W Gao, P Hodgson, H Jinnai, L Kong

(2010), Vol. 250, pp. 757-761, Desalination, Amsterdam, Netherlands, C1

Texture and substructure development during dynamic recrystallization in Ni-30Fe austenite

H Beladi, P Cizek, P Hodgson

(2010), Vol. 638-642, pp. 2835-2840, Materials science forum, Stafa-Zurich, Switzerland, C1

The mechanism of metadynamic softening in austenite after complete dynamic recrystallization

H Beladi, P Cizek, P Hodgson

(2010), Vol. 62, pp. 191-194, Scripta materialia, Kidlington, England, C1

Refinement of microstructure in steels through thermomechanical processing

H Beladi, I Timokhina, S Mukherjee, P Hodgson

(2010), Vol. 97-101, pp. 2163-2166, Advanced materials research, Stafa-Zurich, Switzerland, C1

Biodegradable Mg-Ca and Mg-Ca-Y alloys for regenerative medicine

Y Li, M Li, W Hu, P Hodgson, C Wen

(2010), Vol. 654-656, pp. 2192-2195, Materials science forum, Stafa-Zurich, Switzerland, C1

Biomimetic modification of porous TiNbZr alloy scaffold for bone tissue engineering

X Wang, Y Li, P Hodgson, C Wen

(2010), Vol. 16, pp. 309-316, Tissue engineering : part A, New Rochelle, N.Y., C1

Cytotoxicity of titanium and titanium alloying elements

Y Li, C Wong, J Xiong, P Hodgson, C Wen

(2010), Vol. 89, pp. 493-497, Journal of dental research, Thousand Oaks, Calif., C1

Design of a new biocompatible ti-based shape memory alloy and its superelastic deformation behaviour

J Xiong, Y Li, P Hodgson, C Wen

(2010), Vol. 654-656, pp. 2087-2090, Materials science forum, Stafa-Zurich, Switzerland, C1

Effect of pore size on mechanical properties of titanium foams

Y An, C Yang, P Hodgson, C Wen

(2010), Vol. 654-656, pp. 827-830, Materials science forum, Stafa-Zurich, Switzerland, C1

Effect of process control agent on the porous structure and mechanical properties of a biomedical Ti-Sn-Nb alloy produced by powder metallurgy

A Nouri, P Hodgson, C Wen

(2010), Vol. 6, pp. 1630-1639, Acta biomaterialia, Amsterdam, Netherlands, C1

Effects of deformation-induced heating on bond strength of rolled metal multilayer

D Yang, P Hodgson, C Wen

(2010), Vol. 654-656, pp. 2579-2582, Materials science forum, Stafa-Zurich, C1

Effects of structural property and surface modification of Ti6Ta4Sn scaffolds on the response of SaOS2 cells for bone tissue engineering

Y Li, J Xiong, P Hodgson, C Wen

(2010), Vol. 494, pp. 323-329, Journal of alloys and compounds, Amsterdam, Netherlands, C1

Microstructure evolution and nanograin formation during shear localization in cold-rolled titanium

D Yang, P Cizek, P Hodgson, C Wen

(2010), Vol. 58, pp. 4536-4548, Acta materialia, Oxford, England, C1

Nanohydroxyapatite coating on a titanium-niobium alloy by a hydrothermal process

J Xiong, Y Li, P Hodgson, C Wen

(2010), Vol. 6, pp. 1584-1590, Acta biomaterialia, Amsterdam, The Netherlands, C1

Porous shape memory alloy scaffolds for biomedical applications : a review

C Wen, J Xiong, Y Li, P Hodgson

(2010), Vol. T139, pp. 1-8, Physica scripta, [London, England], C1

Simultaneously enhanced strength and ductility of titanium via multimodal grain structure

D Yang, P Hodgson, C Wen

(2010), Vol. 63, pp. 941-944, Scripta materialia, Amsterdam, The Netherlands, C1

Study on the role of stearic acid and ethylene-bis-stearamide on the mechanical alloying of a biomedical titanium based alloy

A Nouri, P Hodgson, C Wen

(2010), Vol. 41, pp. 1409-1420, Metallurgical and materials transactions A – physical metallurgy and materials science, New York, N. Y., C1

Ultrafine equiaxed-grain Ti/Al composite produced by accumulative roll bonding

D Yang, P Cizek, P Hodgson, C Wen

(2010), Vol. 62, pp. 321-324, Scripta materialia, Oxford, England, C1

Effects of pores on shear bands in metallic glasses : a molecular dynamics study

J Wang, P Hodgson, J Zhang, W Yan, C Yang

(2010), Vol. 50, pp. 211-217, Computational materials science, Amsterdam, Netherlands, C1

Analytical solutions and finite element modelling of deep drawing process for cylindrical metal cups

J Supasuthakul, P Hodgson, M Weiss, C Yang

(2010), Vol. 443, pp. 104-109, Key engineering materials, Aedermannsdorf, Switzerland, C1

Characterization of the bake-hardening behavior of transformation induced plasticity and dual-phase steels using advanced analytical techniques

I Timokhina, E Pereloma, S Ringer, R Zheng, P Hodgson

(2010), Vol. 50, pp. 574-582, ISIJ international, Tokyo, Japan, C1

Compressive deformation and damage of Mg-based metallic glass interpenetrating phase composite containing 30-70 vol% titanium

Y Sun, H Zhang, A Wang, H Fu, Z Hu, C Wen, P Hodgson

(2010), Vol. 25, pp. 2192-2196, Journal of materials research, New York, N.Y., C1

Effect of isothermal dissolution and re-precipitation of austenite on the mechanical properties of duplex structures

A Dehghan-Manshadi, A Shokouhi, P Hodgson

(2010), Vol. 527, pp. 6765-6770, Materials science and eMaterials science and engineering A : structural materials : properties, microstructures and processing, Lausanne, Switzerland, C1

Effect of manufacturing process on the final properties of advanced high strength steels for automotive applications

E Pereloma, I Timokhina, T Hilditch, P Hodgson

(2010), Vol. 638-642, pp. 148-153, Materials science forum, Stafa-Zurich, Switzerland, C1

Fracture toughness of titanium foams for medical applications

S Kashef, A Asgari, T Hilditch, W Yan, V Goel, P Hodgson

(2010), Vol. 527, pp. 7689-7693, Materials science and eMaterials science and engineering A : structural materials : properties, microstructures and processing, Lausanne, Switzerland, C1

In vitro osteoblast-like cell proliferation on nano-hydroxyapatite coatings with different morphologies on a titanium-niobium shape memory alloy

J Xiong, Y Li, P Hodgson, C Wen

(2010), Vol. 95A, pp. 766-773, Journal of biomedical materials research part A, Malden, Mass., C1

Microstructure and properties of a C-Mn steel subjected to heavy plastic deformation

K Muszka, S Dymek, J Majta, P Hodgson

(2010), Vol. 55, pp. 641-645, Archives of metallurgy and materials, Krakow, Poland, C1

Nano-scale analysis of nano-bainite formed in advanced high strength steels

I Timokhina, H Beladi, X Xiong, E Pereloma, P Hodgson

(2010), Vol. 654-656, pp. 102-105, Materials science forum, Stafa-Zurich, Switzerland, C1

On the characteristics of substructure development through dynamic recrystallization

H Beladi, P Cizek, P Hodgson

(2010), Vol. 58, pp. 3531-3541, Acta materialia, Amsterdam, The Netherlands, C1

Post processing of the hot torsion test results using a multi-dimensional modelling approach

S Khoddam, P Hodgson

(2010), Vol. 31, pp. 2578-2584, Materials and design, Amsterdam, The Netherlands, C1

Structure and mechanical properties of asymmetrically rolled IF steel sheet

D Orlov, R Lapovok, L Tóth, I Timokhina, P Hodgson, D Bhattacharjee, A Haldar

(2010), Vol. 654-656, pp. 1255-1258, Materials science forum, Stafa-Zurich, Switzerland, C1

The indentation behaviour of carbon fibre composite tubes-experiments & modelling

R Sudharsan, B Rolfe, P Hodgson

(2010), Vol. 654-656, pp. 2616-2619, Materials science forum, Stafa-Zurich, Switzerland, C1

Die closing force in low pressure tube hydroforming

C Nikhare, M Weiss, P Hodgson

(2010), Vol. 210, pp. 2238-2244, Journal of materials processing technology, Lausanne, Switzerland, C1

Fracture of DP590 steel : a multi-scale modeling approach

C Nikhare, A Asgari, M Weiss, P Hodgson

(2010), Vol. 81, pp. 1450-1453, Steel research international, Weinheim, Germany, C1

Texture and substructure development during post-dynamic softening in Ni-30%Fe austenite

H Beladi, P Cizek, P Hodgson

(2010), Vol. 654-656, pp. 1279-1282, Materials science forum, Stafa-Zurich, Switzerland, C1

Nanostructural engineering of steel

P Hodgson, I Timokhina, H Beladi, I Sabirov, E Pereloma

(2010), Vol. 81, pp. 33-38, steel research international, London, Eng., C1-1

Influence of calcium ion deposition on apatite-inducing ability of porous titanium for biomedical applications

X Chen, Y Li, J du Plessis, P Hodgson, C Wen

(2009), Vol. 5, pp. 1808-1820, Acta biomaterialia, Amsterdam, Netherlands, C1

Study of the effect of grain size on the dynamic mechanical properties of microalloyed steels

K Muszka, P Hodgson, J Majta

(2009), Vol. 500, pp. 25-33, Materials science and engineering A : structural materials: properties, microstructures and processing, Lausanne, Switzerland, C1

Crystallographic analysis of nanobainitic steels

H Beladi, Y Adachi, I Timokhina, P Hodgson

(2009), Vol. 60, pp. 455-458, Scripta materialia, Oxford, England, C1

Microstructures and bond strengths of the calcium phosphate coatings formed on titanium from different simulated body fluids

X Chen, Y Li, P Hodgson, C Wen

(2009), Vol. 29, pp. 165-171, Materials science and engineering C : materials for biological applications, Lausanne, Switzerland, C1

Cyclic deformation of advanced high-strength steels : mechanical behavior and microstructural analysis

T Hilditch, I Timokhina, L Robertson, E Pereloma, P Hodgson

(2009), Vol. 40, pp. 342-353, Metallurgical and materials transactions A : physical metallurgy and materials science, New York, N.Y., C1

Measurement of the mass transfer coefficient at workpiece surfaces in heat treatment furnaces

W Gao, L Kong, J Long, P Hodgson

(2009), Vol. 209, pp. 497-505, Journal of materials processing technology, Lausanne, Switzerland, C1

Dynamic recrystallization of austenite in Ni-30 Pct Fe model alloy : microstructure and texture evolution

H Beladi, P Cizek, P Hodgson

(2009), Vol. 40, pp. 1175-1189, Metallurgical and materials transactions A : physical metallurgy and materials science, New York, N.Y., C1

Modeling of advanced high strength steels with the realistic microstructure-strength relationships

S Asgari, P Hodgson, C Yang, B Rolfe

(2009), Vol. 45, pp. 860-886, Computational materials science, Amsterdam, Netherlands, C1

Texture and substructure characteristics of dynamic recrystallization in a Ni-30%Fe austenitic model alloy

H Beladi, P Cizek, P Hodgson

(2009), Vol. 61, pp. 528-531, Scripta materialia, Kidlington, United Kingdom, C1

Effects of quenching rate on amorphous structures of Cu46Zr54 metallic glass

J Wang, P Hodgson, J Zhang, W Yan, C Yang

(2009), Vol. 209, pp. 4601-4606, Journal of materials processing technology, Lausanne, Switzerland, C1

Nucleation and growth during reactions in accumulative roll bonding of Ti/Al multilayers

D Yang, P Hodgson, C Wen

(2009), Vol. 618-619, pp. 429-432, Materials science forum, Stafa-Zurich, Switzerland, C1

The kinetics of two-stage formation of TiAl3 in multilayered Ti/Al foils prepared by accumulative roll bonding

D Yang, P Hodgson, C Wen

(2009), Vol. 17, pp. 727-732, Intermetallics, Oxford, England, C1

Influence of deformation-induced heating on the bond strength of rolled metal multilayers

D Yang, J Xiong, P Hodgson, C Wen

(2009), Vol. 63, pp. 2300-2302, Materials letters, Amsterdam, Netherlands, C1

The importance of particle size in porous titanium and nonporous counterparts for surface energy and its impact on apatite formation

X Chen, Y Li, P Hodgson, C Wen

(2009), Vol. 5, pp. 2290-2302, Acta biomaterialia, Amsterdam, Netherlands, C1

In vitro cytotoxicity of binary TI alloys for bone implants

Y Li, C Wong, J Xiong, P Hodgson, C Wen

(2009), Vol. 618-619, pp. 295-298, Materials science forum, Stafa-Zurich, Switzerland, C1

Bioactivating the surfaces of titanium by sol-gel process

Y Li, J Xiong, C Wong, P Hodgson, C Wen

(2009), Vol. 614, pp. 67-71, Materials science forum, Stafa-Zurich, Switzerland, C1

Ti6Ta4Sn alloy and subsequent scaffolding for bone tissue engineering

Y Li, J Xiong, C Wong, P Hodgson, C Wen

(2009), Vol. 15, pp. 3151-3159, Tissue engineering part A, Rochelle, N.Y., C1

Microstructure and mechanical properties of thermomechanically processed TRIP steel

I Timokhina, P Hodgson, H Beladi, E Pereloma

(2009), Vol. 11-12, pp. 43-48, La Metallurgia Italiana, Milan, Italy, C1

Effect of bake-hardening on the structure-property relationship of multiphase steels for the automotive industry

I Timokhina, P Hodgson, S Ringer, R Zheng, E Pereloma

(2009), Vol. 80, pp. 507-514, Steel research international, Weinheim, Germany, C1

Effect of structure relaxation on the plastic deformation behaviour in a Zr-based BMG under indenter

H Xie, P Hodgson, C Wen

(2009), Vol. 618-619, pp. 437-441, Materials science forum, Stafa-Zurich, Switzerland, C1

Plastic deformation in the annealed Zr41Ti14Cu12.5Ni10Be22.5 bulk metal glass under indenter

H Xie, Y Li, D Yang, P Hodgson, C Wen

(2009), Vol. 475, pp. 501-505, Journal of alloys and compounds, Amsterdam, Netherlands, C1

Plastic deformation in a partially crystallized Zr-based BMG under Vickers indenter

H Xie, Y Li, S Liao, P Hodgson, C Wen

(2009), Vol. 484, pp. 886-890, Journal of alloys and compounds, Amsterdam, Netherlands, C1

Bioactive hydroxyapatite coating on titanium-niobium alloy through a sol-gel process

J Xiong, Y Li, P Hodgson, C Wen

(2009), Vol. 618-619, pp. 325-328, Materials science forum, Stafa-Zurich, Switzerland, C1

Preparation of bioactive porous titanium-molybdenum alloy through powder metallurgy

Y Yamada, Y Li, J Xiong, T Banno, P Hodgson, C Wen

(2009), Vol. 620-622, pp. 745-748, Materials science forum, Stafa-Zurich, Switzerland, C1

Biomimetic coating on pure titanium submitted to different surface treatments

X Wang, Y Li, P Hodgson, C Wen

(2009), Vol. 618-619, pp. 311-314, Materials Science Forum, Stafa-Zurich, Switzerland, C1

Apatite formation on nano-structured titanium and niobium surface

X Wang, J Xiong, Y Li, P Hodgson, C Wen

(2009), Vol. 614, pp. 85-92, Materials science forum, Stafa-Zurich, Switzerland, C1

Development of the multi-scale analysis model to simulate strain localization occurring during material processing

L Madej, P Hodgson, M Pietrzyk

(2009), Vol. 16, pp. 287-318, Archives of computational methods in engineering, Dordrecht, Netherlands, C1

Effect of pre-straining and bake hardening on the microstructure and mechanical properties of CMnSi trip steels

L Zhang, I Timokhina, A La Fontaine, S Ringer, P Hodgson, E Pereloma

(2009), Vol. 101, pp. 49-55, Metallurgia Italiana, Milan, Italy, C1

Degradation of the strength of porous titanium after alkali and heat treatment

J Lin, Y Li, C Wong, P Hodgson, C Wen

(2009), Vol. 485, pp. 316-319, Journal of alloys and compounds, Amsterdam, Netherlands, C1

Effect of transformation mechanism (static or dynamic) on final ferrite grain size

A Shokouhi, P Hodgson

(2009), Vol. 25, pp. 29-34, Materials science and technology, Leeds, United Kingdom, C1

FEA comparison of high and low pressure tube hydroforming of TRIP steel

C Nikhare, M Weiss, P Hodgson

(2009), Vol. 47, pp. 146-152, Computational materials science, Amsterdam, Netherlands, C1

Mg-based metallic glass / titanium interpenetrating phase composite with high mechanical performance

Y Sun, H Zhang, A Wang, H Fu, Z Hu, C Wen, P Hodgson

(2009), Vol. 95, pp. 1-3, Applied physics letters, Melville, N.Y., C1

Plastic flow properties and microstructural evolution in an ultrafine-grained Al-Mg-Si alloy at elevated temperatures

B Kashyap, P Hodgson, Y Estrin, I Timokhina, M Barnett, I Sabirov

(2009), Vol. 40, pp. 3294-3303, Metallurgical and materials transactions A – physical metallurgy and materials science, New York, N.Y., C1

Porous TiNbZr alloy scaffolds for biomedical applications

X Wang, Y Li, J Xiong, P Hodgson, C Wen

(2009), Vol. 5, pp. 3616-3624, Acta biomaterialia, Amsterdam, Netherlands, C1

The effect of strain rate on the deformation mechanisms and the strain rate sensitivity of an ultra-fine-grained Al alloy

I Sabirov, M Barnett, Y Estrin, P Hodgson

(2009), Vol. 61, pp. 181-184, Scripta materialia, Kidlington. England, C1

Deep drawing behaviour of ultrafine grained copper : modelling and experiment

X Ma, R Lapovok, C Gu, A Molotnikov, Y Estrin, E Pereloma, C Davies, P Hodgson

(2009), Vol. 44, pp. 3807-3812, Journal of materials science, New York, N.Y., C1

Deformation mechanisms in an ultra-fine grained Al alloy

I Sabirov, M Barnett, Y Estrin, I Timokhina, P Hodgson

(2009), Vol. 100, pp. 1679-1685, International journal of materials research, Munich, Germany, C1

Deformation behaviour of ultrafine grained steel produced by cold rolling of martensite

S Malekjani, I Timokhina, I Sabirov, P Hodgson

(2009), Vol. 48, pp. 229-236, Canadian metallurgical quarterly, Montreal, Canada, C1

Microstructure evolution modeling during and after deformation in 304 austenitic stainless steel through cellular automaton approach

N Yazdipour, P Hodgson, C Davies

(2009), Vol. 7, pp. 381-393, International journal for multiscale computational engineering, Redding, CT, C1

Recrystallization in AISI 304 austenitic stainless steel during and after hot deformation

A Dehghan-Manshadi, M Barnett, P Hodgson

(2008), Vol. 485, pp. 664-672, Materials science and engineering A: structural materials: properties, microstructures and processing, Lausanne, Switzerland, C1

Apatite-inducing ability of titanium oxide layer on titanium surface : the effect of surface energy

X Wang, Y Li, J Lin, P Hodgson, C Wen

(2008), Vol. 23, pp. 1682-1688, Journal of materials research, Warrendale, Pa., C1

Effect of surface roughness of Ti, Zr, and TiZr on apatite precipitation from simulated body fluid

X Chen, A Nouri, Y Li, J Lin, P Hodgson, C Wen

(2008), Vol. 101, pp. 378-387, Biotechnology and bioengineering, Malden, Mass., C1

Correlation between the deformation and post-deformation softening behaviours in hot worked Austenite

A Dehghan-Manshadi, J Jonas, P Hodgson, M Barnett

(2008), Vol. 48, pp. 208-211, ISIJ International, Tokyo, Japan, C1

Titanium-nickel shape memory alloy foams for bone tissue engineering

J Xiong, Y Li, X Wang, P Hodgson, C Wen

(2008), Vol. 1, pp. 269-273, Journal of the mechanical behavior of biomedical materials, Amsterdam, Netherlands, C1

Statistical analysis of finite element modeling in sheet metal forming and springback analysis

S Asgari, M Pereira, B Rolfe, M Dingle, P Hodgson

(2008), Vol. 203, pp. 129-136, Journal of materials processing technology, Zürich, Switzerland, C1

Plastic deformation in Zr41 Ti14 Cu12.5 Ni10 Be22.5 bulk metal glass under vickers indenter

H Xie, J Lin, Y Li, W Yan, P Hodgson, C Wen

(2008), Vol. 461, pp. 173-177, Journal of alloys and compounds, Amsterdam, The Netherlands, C1

Simulation of three-point bending test of titanium foam for biomedical applications

S Kashef, A Asgari, P Hodgson, W Yan

(2008), Vol. 32, pp. 237-240, Advanced materials research, Stafa-Zurich, Switzerland, C1

Multiscale particle-in-cell modelling for advanced high strength steels

S Asgari, P Hodgson, V Lemiale, C Yang, B Rolfe

(2008), Vol. 32, pp. 285-288, Advanced materials research, Stafa-Zurich, Switzerland, C1

Synthesis of Ti-Sn-Nb alloy by powder metallurgy

A Nouri, X Chen, Y Li, Y Yamada, P Hodgson, C Wen

(2008), Vol. 485, pp. 562-570, Materials science and engineering A: structural materials: properties, microstructures and processing, Lausanne, Switzerland, C1

Effect of heat-treatment atmosphere on the bond strength of apatite layer on Ti substrate

X Wang, Y Li, J Lin, P Hodgson, C Wen

(2008), Vol. 24, pp. 1549-1555, Dental materials, Maryland Heights, Mo., C1

In vitro bioactivity evaluation of titanium and niobium metals with different surface morphologies

X Wang, Y Li, J Lin, Y Yamada, P Hodgson, C Wen

(2008), Vol. 4, pp. 1530-1535, Acta biomaterialia, Amsterdam, The Netherlands, C1

Enhanced tensile ductility of an ultra-fine-grained aluminium alloy

I Sabirov, Y Estrin, M Barnett, I Timokhina, P Hodgson

(2008), Vol. 58, pp. 163-166, Scripta Materialia, Oxford, England, C1

Mechanical properties and bioactive surface modification via alkali-heat treatment of a porous ti-18Nb-4Sn alloy for biomedical applications

J Xiong, Y Li, X Wang, P Hodgson, C Wen

(2008), Vol. 4, pp. 1963-1968, Acta biomaterialia, Amsterdam, The Netherlands, C1

Analytic prediction of structural stress-strain relations of microstructured metal

C Yang, I Sabirov, J Mullins, P Hodgson

(2008), Vol. 32, pp. 83-86, Advanced materials research, Stafa-Zurich, Switzerland, C1

Geometrical effects on residual stresses in 7050-T7451 aluminum alloy rods subject to laser shock peening

C Yang, P Hodgson, Q Liu, L Ye

(2008), Vol. 201, pp. 303-309, Journal of materials processing technology, Amsterdam, The Netherlands, C1

Tensile deformation of a ultrafine-grained aluminium alloy: micro shear banding and grain boundary sliding

I Sabirov, Y Estrin, M Barnett, I Timokhina, P Hodgson

(2008), Vol. 56, pp. 2223-2230, Acta Materialia, Oxford, England, C1

Deformation behaviour of an ultra-fine grained Al6082 alloy

I Sabirov, Y Estrin, M Barnett, I Timokhina, P Hodgson

(2008), Vol. 584 - 586, pp. 703-707, Materials science forum, Aedermannsdorf, Switzerland, C1

Hot deformation and recrystallization of austenitic stainless steel: Part 11. post-deformation recrystallization

A Dehghan-Manshadi, M Barnett, P Hodgson

(2008), Vol. 39, pp. 1371-1381, Metallurgical and materials transactions A - physical metallurgy and materials science, Boston, Mass., C1

Hot deformation and recrystallization of austenitic stainless steel: part 1. dynamic recrystallization

A Dehghan-Manshadi, M Barnett, P Hodgson

(2008), Vol. 39, pp. 1359-1370, Metallurgical and materials transactions A - physical metallurgy and materials science, Boston, Mass., C1

Dependency of recrystallization mechanism to the initial grain size

A Dehghan-Manshadi, P Hodgson

(2008), Vol. 39, pp. 2830-2840, Metallurgical and materials transactions A - physical metallurgy and materials science, New York, N.Y., C1

Micro- and nano-characterization of membrane materials

F She, W Gao, Z Peng, P Hodgson, L Kong

(2008), Vol. 39, pp. 313-320, Journal of the Chinese Institute of Chemical Engineers, Taiwan, Republic of China, C1

Microstructural modeling of dynamic recrystallization using irregular cellular automata

N Yazdipour, C Davies, P Hodgson

(2008), Vol. 44, pp. 566-576, Computational materials science, Amsterdam, Netherlands, C1

Integrated optimization system for high pressure die casting processes

L Kong, F She, W Gao, S Nahavandi, P Hodgson

(2008), Vol. 201, pp. 629-634, Journal of materials processing technology, Zürich, Switzerland, C1

The effect of prestrain and bake hardening on the low-cycle fatigue properties of TRIP steel

L Robertson, T Hilditch, P Hodgson

(2008), Vol. 30, pp. 587-594, International journal of fatigue, Oxford, England, C1

Influence of porosity on shape memory behavior of porous TiNi shape memory alloy

J Xiong, Y Li, P Hodgson, C Wen

(2008), Vol. 1, pp. 215-219, Functional materials letters (FML), Singapore, C1

Residual thermal stresses in a Fe3Al/Al2O3 gradient coating system

J Wang, P Hodgson, J Zhang, C Yang

(2008), Vol. 32, pp. 71-74, Advanced Materials Research, Switzerland, C1

T-Shaped equi-channel angular pressing of Pb-Sn eutectic and its tensile properties

V Srinivas Rao, B Kashyap, N Prabhu, P Hodgson

(2008), Vol. 486, pp. 341-349, Materials science and engineering. A. Structural materials : properties, microstructures and processing, Lausanne, Switzerland, C1

EBSD analysis of a Ti-IF steel subjected to hot torsion in the ferritic region

A Oudin, P Hodgson, M Barnett

(2008), Vol. 486, pp. 72-79, Materials science and engineering. A. Structural materials : properties, microstructures and processing, Lausanne, Switzerland, C1

Determination of plastic yield stress from spherical indentation slope curve

W Yan, Q Sun, P Hodgson

(2008), Vol. 62, pp. 2260-2262, Materials letters, Amsterdam, The Netherlands, C1

A descriptive model for the formation of ultrafine grained steels

P Hodgson, A Shokouhi, H Beladi

(2008), Vol. 48, pp. 1046-1049, ISIJ international, Tokyo, Japan, C1

Mechanical properties of titanium foam for biomedical applications

S Kashef, W Yan, J Lin, P Hodgson

(2008), Vol. 22, pp. 6155-6160, International journal of modern physics B, Singapore, C1

The forming of advanced high strength steels for the automotive industry

B Rolfe, S Asgari, P Hodgson

(2008), Vol. Special issue; 1, pp. 9-18, Steel Research International, Düsseldorf, Germany, C1-1

The formation of ultrafine ferrite through static transformation in low carbon steels

Y Adachi, M Wakita, H Beladi, P Hodgson

(2008), Vol. 22, pp. 2804-2813, International journal of modern physics B, Singapore, C1-1

Effect of δ-ferrite co-existence on hot deformation and recrystallization of austenite

A Dehghan-Manshadi, P Hodgson

(2008), Vol. 43, pp. 6272-6277, Journal of materials science, New York, N.Y., C1-1

Effect of carbon content on the recrystallization kinetics of Nb-steels

H Beladi, P Hodgson

(2007), Vol. 56, pp. 1059-1062, Scripta materialia, Oxford, England, C1

The effect of multiple deformations on the formation of ultrafine grained steels

H Beladi, G Kelly, P Hodgson

(2007), Vol. 38, pp. 450-463, Metallurgical and materials transactions A - physical metallurgy and materials science, Warrendale, PA., C1

Ultrafine grained structure formation in steels using dynamic strain induced transformation processing

H Beladi, G Kelly, P Hodgson

(2007), Vol. 52, pp. 14-28, International materials reviews, London, England, C1

The formation of ultrafine ferrite through static transformation in low carbon steels

Y Adachi, M Wakita, H Beladi, P Hodgson

(2007), Vol. 55, pp. 4925-4934, Acta Materialia, Oxford, England, C1

Hydroxyapatite/titania sol-gel coatings on titanium-zirconium alloy for biomedical applications

C Wen, W Xu, W Hu, P Hodgson

(2007), Vol. 3, pp. 403-410, Acta biomaterialia, Amsterdam, Netherlands, C1

Porous titanium with porosity gradients for biomedical applications

C Wen, Y Yamada, A Nouri, P Hodgson

(2007), Vol. 539-543, pp. 720-725, Materials science forum, Aedermannsdorf, Switzerland, C1

Surface modification of TiZr alloy for biomedical application

X Chen, A Nouri, P Hodgson, C Wen

(2007), Vol. 15, pp. 89-94, Advanced materials research, Uetikon-Zuerich, Switzerland, C1

Preparation and characterisation of new titanium based alloys for orthopaedic and dental applications

A Nouri, X Chen, P Hodgson, C Wen

(2007), Vol. 15-17, pp. 71-76, Advanced materials research, Uetikon-Zuerich, Switzerland, C1

The recrystallization behaviour of Nb microalloyed steels

H Beladi, P Hodgson

(2007), Vol. 561, pp. 25-28, Materials science forum, Aedermannsdorf, Switzerland, C1

Composition dependency of the glass forming ability (GFA) in Mg-Ni-Si system by mechanical alloying

H Xie, J Lin, Y Li, P Hodgson, C Wen

(2007), Vol. 459, pp. 35-39, Materials science and engineering A: Structural materials: properties, microstructures and processing, Lausanne, Switzerland, C1

Processing and mechanical properties of porous titanium-niobium shape memory alloy for biomedical applications

J Xiong, Y Li, Y Yamada, P Hodgson, C Wen

(2007), Vol. 561, pp. 1689-1692, Materials science forum, Aedermannsdorf, Switzerland, C1

Robust video/ultrasonic fusion-based estimation for automotive applications

P Pathirana, A Lim, A Savkin, P Hodgson

(2007), Vol. 56, pp. 1631-1639, IEEE transactions on vehicular technology, Piscataway, N.J., C1

Numerical investigation of austenite grain size distribution in square-diamond pass hot bar rolling

H Lee, H Kwon, Y Im, P Hodgson

(2007), Vol. 191, pp. 114-118, Journal of materials processing technology, Aedermannsdorf, Switzerland, C1

Dynamic softening of ferrite during large strain warm deformation of a plain-carbon steel

B Eghbali, A Abdollah-Zadeh, P Hodgson

(2007), Vol. 462, pp. 259-263, Materials science and engineering A: structural materials: properties, microstructures and processing, Lausanne, Switzerland, C1

Three-dimensional atom probe analysis of solute distribution in thermomechanically processed TRIP steels

E Pereloma, I Timokhina, M Miller, P Hodgson

(2007), Vol. 55, pp. 2587-2598, Acta materialia, New York, NY, C1

Precipitate characterisation of an advanced high-strength low-alloy (HSLA) steel using atom probe tomography

I Timokhina, P Hodgson, S Ringer, R Zheng, E Pereloma

(2007), Vol. 56, pp. 601-604, Scripta materialia, New York, N.Y., C1

Multi-scale rheological model for discontinuous phenomena in materials under deformation conditions

L Madej, P Hodgson, M Pietrzyk

(2007), Vol. 38, pp. 685-691, Computational materials science, Aedermannsdorf, Switzerland, C1

Computational simulation of gas flow and heat transfer near an immersed object in fluidized beds

W Gao, L Kong, P Hodgson

(2007), Vol. 38, pp. 826-834, Advances in engineering software, Barking, Essex, England, C1

Alternating heat transfer between objects of large geometrical difference

W Gao, L Kong, P Hodgson

(2007), Vol. 38, pp. 818-825, Advances in engineering software, Barking, Essex, England, C1

Finite element simulation of deformation processes of micro-components

W Gao, L Kong, P Hodgson

(2007), Vol. 21, pp. 1456-1463, Journal of mechanical science and technology, Germany, C1

A signal processing approach for elastic wave-based structural health monitoring using active piezoelectrics

C Yang, Z Su, L Ye, L Zhou, P Hodgson

(2007), Vol. 334-335, pp. 1141-1144, Key engineering materials, Aedermannsdorf, Switzerland, C1

Three-dimensional Finite Element modelling of laser shock peening process

C Yang, P Hodgson, Q Liu, L Ye

(2007), Vol. 561-565, pp. 2261-2264, Materials science forum, Aedermannsdorf, Switzerland, C1

Characterization of nano-scale particles in hot-rolled, high strength low alloy steels (HSLA)

I Timokhina, P Hodgson, S Ringer, R Zheng, E Pereloma

(2007), Vol. 561-565, pp. 2083-2086, Materials science forum, Uetikon-Zuerich, Switzerland, C1

Effect of initial processing on the microstructure-property relationships in bake-hardened C-Mn-Si TRIP steels

I Timokhina, E Pereloma, P Hodgson

(2007), Vol. 539-543, pp. 4315-4320, Materials science forum, Uetikon-Zuerich, Switzerland, C1

Structure-property relations of metallic materials with multiscale microstructures

C Yang, I Sabirov, J Mullins, N Yazdipour, A Asgari, P Hodgson

(2007), Vol. 31, pp. 177-185, Materials forum (CD-ROM), North Melbourne, Vic., C1

Microstructure evolution of TI-SN-NB alloy prepared by mechanical alloying

A Nouri, J Lin, Y Li, Y Yamada, P Hodgson, C Wen

(2007), Vol. 31, pp. 64-70, Materials forum (CD-ROM), North Melbourne, Vic., C1

Nano- and macro-scale characterisation of the mechanical properties of bovine bone

X Wang, Y Li, P Hodgson, C Wen

(2007), Vol. 31, pp. 156-159, Materials forum, North Melbourne, Vic., C1

Simulation of dynamic recrystallization using irregular cellular automata

N Yazdipour, A Dehghan-Manshadi, C Davies, P Hodgson

(2007), Vol. 31, pp. 164-176, Materials forum (CD-ROM), North Melbourne, Vic., C1

The validation of a multiscale rheological model of discontinuous phenomena during metal rolling

L Madej, P Hodgson, M Pietrzyk

(2007), Vol. 41, pp. 236-241, Computational materials science, Aedermannsdorf, Switzerland, C1

Determination of lower-bound ductility for AZ31 magnesium alloy by use of the bulge specimens

R Lapovok, P Hodgson

(2007), Vol. 129, pp. 407-413, Journal of engineering materials and technology, New York, N.Y., C1

Transmission electron microscopy characterization of the bake-hardening behavior of transformation-induced plasticity and dual-phase steels

I Timokhina, P Hodgson, E Pereloma

(2007), Vol. 38, pp. 2442-2454, Metallurgical and materials transactions A - Physical metallurgy and materials science, Warrendale, PA., C1

Indentation study on the pressure sensitivity of a ZR-based bulk metallic glass

J Lin, H Xie, Y Li, P Hodgson, C Wen

(2007), Vol. 31, pp. 139-143, Materials forum (CD-ROM), North Melbourne, Vic., C1

Mechanical properties and energy absorption of ceramic particulate and resin-impregnation reinforced aluminium foams

Y Li, J Xiong, J Lin, M Forrest, P Hodgson, C Wen

(2007), Vol. 31, pp. 52-56, Materials forum (CD-ROM), North Melbourne, Vic., C1

TiNi shape memory alloy foams synthesized by spacer sintering and their properties

J Xiong, Y Li, P Hodgson, C Wen

(2007), Vol. 25, pp. 892-894, Journal of materials science & engineering, Zhejiang, China, C1

The influence of temperature on the forming behavior of metal/polymer laminates in sheet metal forming

M Weiss, M Dingle, B Rolfe, P Hodgson

(2007), Vol. 129, pp. 530-537, Journal of engineering materials and technology, New York, N.Y., C1

Simulation of dynamic recrystallization using random grid cellular automata

N Yazdipour, C Davies, P Hodgson

(2007), Vol. 7, pp. 168-174, Computer methods in materials science, Krakow, Poland, C1

Microstructural evolution during hot deformation of duplex stainless steel

A Dehghan-Manshadi, M Barnett, P Hodgson

(2007), Vol. 23, pp. 1478-1484, Materials science and technology, London, England, C1

Dynamic adjustment of ferrite grains during dynamic strain induced transformation

A Shokouhi, P Hodgson

(2007), Vol. 23, pp. 1233-1242, Materials science and technology, London, England, C1

Modeling of the mechanical behavior of nanostructured HSLA steels

K Muszka, J Majta, P Hodgson

(2007), Vol. 47, pp. 1221-1227, ISIJ international, Tokyo, Japan, C1

Possibilities to include in numerical simulation stochastic and discontinuous phenomena occurring in material

L Madej, H Paul, P Hodgson, M Pietrzyk

(2007), Vol. 7, pp. 162-167, Computer methods in materials science, Lodz, Poland, C1

Comparison of the strain distribution obtained from multi scale and conventional approaches to modelling extrusion

L Madej, P Hodgson, M Pietrzyk

(2007), Vol. 129, pp. 25-30, Solid state phenomena, Uetikon-Zuerich, Switzerland, C1

Dynamic recrystallization of austenitic stainless steel under multiple peak flow behaviours

A Dehghan-Manshadi, P Hodgson

(2007), Vol. 47, pp. 1799-1803, ISIJ international, Tokyo, Japan, C1-1

Elastic modulus and hardness of cortical and trabecular bovine bone measured by nanoindentation

X Wang, X Chen, P Hodgson, C Wen

(2006), Vol. 16, pp. 744-748, Transactions of Nonferrous Metals Society of China, Changsha, China, C1

Fabrication of novel TiZr alloy foams for biomedical applications

C Wen, Y Yamada, P Hodgson

(2006), Vol. 26, pp. 1439-1444, Materials science & engineering. C, biomimetic materials, sensors and systems., Lausanne, Switzerland, C1

Experimental and numerical studies of springback in air V-bending process for cold rolled TRIP steels

D Fei, P Hodgson

(2006), Vol. 236, pp. 1847-1851, Nuclear engineering and design, Amsterdam, Netherlands, C1

Local total and radiative heat-transfer coefficients during the heat treatment of a workpiece in a fluidised bed

W Gao, L Kong, P Hodgson

(2006), Vol. 26, pp. 1463-1470, Applied thermal engineering, Oxford, United Kingdom, C1

Determination of drawbead contacts with variable bead penetration

N Nanayakkara, P Hodgson

(2006), Vol. 6, pp. 188-194, Computer methods in materials science, Poland, C1

Sol-gel derived HA/TiO2 double coatings on Ti scaffolds for orthopaedic applications

W Xu, W Hu, M Li, Q Ma, P Hodgson, C Wen

(2006), Vol. 16, pp. 209-216, Transactions of Nonferrous Metals Society of China, Changsha, China, C1

A physical based modeling approach for the dynamic behavior of ultrafine grained structures

K Muszka, P Hodgson, J Majta

(2006), Vol. 177, pp. 456-460, Journal of materials processing technology, Amsterdam, Netherlands, C1

Characterization on ferrite microstructure evolution during large strain warm torsion testing of plain low carbon steel

B Eghbali, A Abdollah-Zadeh, H Beladi, P Hodgson

(2006), Vol. 435-436, pp. 499-503, Materials science & engineering. A. Structural materials : properties, microstructure and processing, Lausanne, Switzerland, C1

Microstructure evolution modeling of square-diamond pass hot bar rolling of AISI 4135 steel

H Lee, H Kwon, Y Im, P Hodgson

(2006), Vol. 6, pp. 140-149, Computer methods in materials science, Lodz, Poland, C1

Numerical analysis of heat transfer and the optimisation of regenerators

W Gao, P Hodgson, L Kong

(2006), Vol. 50, pp. 63-78, Numerical heat transfer, part A, Philadelphia, Pa., C1-1

Fabrication of novel metal alloy foams for biomedical applications

C Wen, Y Yamada, P Hodgson

(2005), Vol. 29, pp. 274-278, Materials forum, North Melbourne, Vic, C1

A nitrocarburising and low-temperature chromising duplex surface treatment

D Fabijanic, G Kelly, J Long, P Hodgson

(2005), Vol. 29, pp. 77-82, Materials forum, North Melbourne, Vic, C1

Interaction between the coating characteristics of galvanneal steel and forming parameters during flat die drawing

N Nanayakkara, J Long, P Hodgson

(2005), Vol. 29, pp. 340-344, Materials forum, North Melbourne, Vic, C1

Application of bending under tension test to determine the effect of tool radius and the contact pressure on the coefficient of friction in sheet metal forming

N Nanayakkara, G Kelly, P Hodgson

(2005), Vol. 29, pp. 114-118, Materials forum, North Melbourne, Vic, C1

Grain refinement in steels through thermomechanical processing

P Hodgson, H Beladi, M Barnett

(2005), Vol. 500, pp. 39-48, Materials science forum, Aedermannsdorf, Switzerland, C1

Mapping the hot deformation microstructure of Ni-30Fe alloy

H Beladi, P Hodgson, M Barnett

(2005), Vol. 45, pp. 1893-1896, ISIJ international, Tokyo, Japan, C1

An analysis of the transition between strain dependent and independent softening in austenite

M Cartmill, M Barnett, S Zahiri, P Hodgson

(2005), Vol. 45, pp. 1903-1908, ISIJ international, Tokyo, Japan, C1

Development of the sheared edge in the trimming of steel and light metal sheet, part 1 - experimental observations

T Hilditch, P Hodgson

(2005), Vol. 169, pp. 184-191, Journal of materials processing technology, Amsterdam, Netherlands, C1

Development of the sheared edge in the trimming of steel and light metal sheet, part 2 - mechanisms and modelling

T Hilditch, P Hodgson

(2005), Vol. 169, pp. 192-198, Journal of materials processing technology, Amsterdam, Netherlands, C1

Development of ultrafine grained steels through thermomechanical processing

P Hodgson, H Beladi, G Kelly

(2005), Vol. 44, pp. 179-185, Canadian metallurgical quarterly, Montreal, Canada, C1

A mechanical approach to quantify dynamic recrystallization in polycrystalline metals

S Zahiri, C Davies, P Hodgson

(2005), Vol. 52, pp. 299-304, Scripta materialia, Tarrytown, NY, C1

Experimental investigation and numerical simulation of heat transfer in quenching fluidised beds

W Gao, L Kong, P Hodgson

(2005), Vol. 24, pp. 319-338, International journal of materials & product technology, Geneva, Switzerland, C1

The mechanical characterization of low work hardening, high strength steel

R Scott, P Hodgson

(2005), Vol. 2, pp. 1-15, Journal of ASTM International, West Conshohocken, PA, C1

Local Austenite grain size distribution in hot bar rolling of AISI 4135 Steel

H Lee, H Kwon, Y Im, P Hodgson, S Zahiri

(2005), Vol. 45, pp. 706-712, ISIJ International, Tokyo, Japan, C1

Effect of stress on viral-bacterial synergy in bovine respiratory disease: novel mechanisms to regulate inflammation

P Hodgson, P Aich, A Manuja, K Hokamp, F Roche, F Brinkman, A Potter, L Babiuk, P Griebel

(2005), Vol. 6, pp. 244-250, Comparative and Functional Genomics (Hindawi), C1-1

Characterisation of galvanneal coatings on strip steel

J Long, D Haynes, P Hodgson

(2004), Vol. 27, pp. 62-67, Materials forum, North Melbourne, Vic, C1

Influence of the geometry of an immersed steel workpiece on mass transfer coefficient in a chemical heat treatment fluidised bed

W Gao, J Long, L Kong, P Hodgson

(2004), Vol. 44, pp. 869-877, ISIJ international, Tokyo, Japan, C1

Microstructural evolution of ultrafine grained structure in plain carbon steels through single pass rolling

H Beladi, G Kelly, P Hodgson

(2004), Vol. 20, pp. 1538-1544, Materials science and technology, Leeds, England, C1

The static, dynamic and metadynamic recrystallisation of a medium carbon steel

S Zahiri, P Hodgson

(2004), Vol. 20, pp. 458-464, Materials science and technology, London, England, C1

Effect of microstructure on the stability of retained austenite in transformation-induced-plasticity steels

I Timokhina, P Hodgson, E Pereloma

(2004), Vol. 35A, pp. 2331-2341, Metallurgical and materials transactions. A, Physical metallurgy and materials science, Warrendale, Pa., C1

The evolution of ultrafine ferrite formation through dynamic strain-induced transformation

H Beladi, G Kelly, A Shokouhi, P Hodgson

(2004), Vol. 371, pp. 343-352, Materials science & engineering. A., Structural materials : properties, microstructure and processing, Lausanne, Switzerland, C1

Formation of ultrafine grained structure in plain carbon steels through thermomechanical processing

H Beladi, G Kelly, P Hodgson

(2004), Vol. 45, pp. 2214-2218, Materials transactions, Sendai, Japan, C1

Recrystallization in 304 austenitic stainless steel

A Dehghan-Manshadi, H Beladi, M Barnett, P Hodgson

(2004), Vol. 467, pp. 1163-1168, Materials science forum, Aedermannsdorf, Switzerland, C1

Formation of ultrafine grained microstructures in steel through strain induced transformation during single pass hot rolling

H Beladi, A Zarei-Hanzaki, G Kelly, P Hodgson

(2004), Vol. 20, pp. 213-220, Materials science and technology, London, England, C1

Grain size effect on the warm deformation behaviour of a Ti-IF steel

A Oudin, M Barnett, P Hodgson

(2004), Vol. 367, pp. 282-294, Materials science & engineering A. Structural materials : properties, microstructure and processing, Amsterdam, Netherlands, C1

Effect of thermomechanical parameters on the critical strain for ultrafine ferrite formation through hot torsion testing

H Beladi, G Kelly, A Shokouhi, P Hodgson

(2004), Vol. 367, pp. 152-161, Materials science & engineering. A., Structural materials : properties, microstructure and processing, Lausanne, Switzerland, C1

The role of recrystallization and coarsening in the formation of ultrafine grained steels through thermomechanical processing.

P Hodgson, H Beladi

(2004), Vol. 467, pp. 1137-1144, Materials science forum, Aedermannsdorf, Switzerland, C1

The static and metadynamic recrystallization behaviour of an X60 Nb Microalloyed Steel

P Hodgson, S Zahiri, J Whale

(2004), Vol. 44, pp. 1224-1229, ISIJ international, Tokyo, Japan, C1

Static and metadynamic recrystallization of interstitial free steels during hot deformation

S Zahiri, S Byon, S Kim, Y Lee, P Hodgson

(2004), Vol. 44, pp. 1918-1923, ISIJ international, Tokyo, Japan, C1

The formation of ultrafine grained steel microstructures through thermomechanical processing.

P Hodgson, H Beladi

(2004), Vol. 2, pp. 45-51, Steel grips, Germany, C1

The influence of interlayer thickness and properties on spring-back of SPS- (steel/polymer/steel) laminates.

M Weiss, B Rolfe, M Dingle, P Hodgson

(2004), Vol. 2, pp. 445-449, Steel grips, Germany, C1

Using inverse analysis to obtain material behaviour for crash simulations

J Mullins, P Hodgson, M Dingle

(2004), Vol. 2, pp. 535-540, Steel grips, Germany, C1

Determination of the coefficient of friction in partially penetrated draw beads

N Nanayakkara, G Kelly, P Hodgson

(2004), Vol. 2, pp. 677-680, Steel grips, Germany, C1

Force modelling of the crankshaft pin grinding process.

A Walsh, B Baliga, P Hodgson

(2004), Vol. 218, pp. 219-228, Proceedings of the Institution of Mechanical Engineers, Part D: journal of automobile engineering, London, England, C1

Static recrystallization of Ti-IF steel after warm deformation

R Ebrahimi, A Oudin, A Najafi-Zadeh, M Barnett, P Hodgson

(2004), Vol. 467, pp. 251-256, Materials science forum, Aedermannsdorf, Switzerland, C1

A hybrid draw die optimization technique for sheet metal forming

A Scott-Murphy, S Kalyanasundaram, M Cardew-Hall, P Hodgson

(2004), Vol. 126, pp. 582-590, Journal of manufacturing science and engineering, New York, N.Y., C1-1

Multistage strain aging of low-carbon steels

M Staiger, A Brownrigg, P Hodgson, C Davies

(2004), Vol. 364, pp. 35-47, Materials science and engineering: A, Amsterdam, The Netherlands, C1-1

A finite element simulation of micro-mechanical frictional behaviour in metal forming

S Zhang, P Hodgson, M Cardew-Hall, S Kalyanasundaram

(2003), Vol. 134, pp. 81-91, Journal of materials processing technology, Amsterdam, Netherlands, C1

Grain size effect on behaviour and microstructure of a warm deformed Ti-IF steel

A Oudin, M Barnett, P Hodgson

(2003), Vol. 426, pp. 1279-1284, Materials science forum, Aedermannsdorf, Switzerland, C1

A study on ultrafine ferrite formation during post deformation cooling

A Shokouhi, H Beladi, P Hodgson

(2003), Vol. 426, pp. 1295-1300, Materials science forum, Aedermannsdorf, Switzerland, C1

Effect of deformation schedule on the microstructure and mechanical properties of a thermomechanically processed C-Mn-Si transformation-induced plasticity steel

I Timokhina, P Hodgson, E Pereloma

(2003), Vol. 34A, pp. 1599-1609, Metallurgical and materials transactions. A, Physical metallurgy and materials science, Warrendale, PA, C1

Analysis of work hardening and recrystallization during the hot working of steel using a statistically based internal variable model

C Roucoules, M Pietrzyk, P Hodgson

(2003), Vol. 339, pp. 1-9, Materials science and engineering A, Lausanne, Switzerland, C1

Multi equal channel angular pressing with rotational dies

Y Kim, X Ma, P Hodgson, M Barnett

(2003), Vol. 426, pp. 2777-2782, Materials science forum, Zurich, Switzerland, C1

A new method to determine the strain and strain rate hardening characteristics from the hot torsion test

S Khoddam, P Hodgson

(2003), Vol. 426, pp. 1373-1378, Materials science forum, Uetikon-Zuerich, Switzerland, C1

Use of image recognition techniques in the analysis of sheet metal forming force signature curves

M Doolan, S Kalyanasundaram, M Cardew-Hall, P Hodgson

(2003), Vol. 125, pp. 363-368, Journal of manufacturing science and engineering, New York, N.Y., C1-1

Mechanical properties of tension levelled and skin passed steels

E Hoggan, R Scott, M Barnett, P Hodgson

(2002), Vol. 125-126, pp. 155-163, Journal of materials processing technology, Amsterdam, Netherlands, C1

Numerical simulation of heat and mass transfer in fluidised bed heat treatment furnaces

W Gao, L Kong, P Hodgson

(2002), Vol. 125-126, pp. 170-178, Journal of materials processing technology, Amsterdam, Netherlands, C1

Inferring dynamic recrystallization in ferrite using the kinetics of static recrystallization

M Barnett, G Kelly, P Hodgson

(2002), Vol. 33A, pp. 1893-1900, Metallurgical and materials transactions. A, Physical metallurgy and materials science, Materials Park, Oh., C1

Estimating quality costs in an automotive stamping plant through the use of simulation

A de Ruyter, M Cardew-Hall, P Hodgson

(2002), Vol. 40, pp. 3835-3848, International journal of production research, London, England, C1

Simulation of the fastener manufacturing process

D Petrescu, S Savage, P Hodgson

(2002), Vol. 125-126, pp. 361-368, Journal of materials processing technology, Amsterdam, Netherlands, C1

Effect of membrane stress on surface roughness changes in sheet forming

S Zhang, P Hodgson, J Duncan, M Cardew-Hall, S Kalyanasundaram

(2002), Vol. 253, pp. 610-617, Wear, Amsterdam, Netherlands, C1

Ultrafine grained ferrite formed by interrupted hot torsion deformation of plain carbon steel

G Kelly, H Beladi, P Hodgson

(2002), Vol. 42, pp. 1585-1590, ISIJ international, Tokyo, Japan, C1

Analytical model of pass-by-pass strain in rod (or bar) rolling and its applications to prediction of austenite grain size

Y Lee, S Choi, P Hodgson

(2002), Vol. 336, pp. 177-189, Materials science and engineering A : structural materials: properties, microstructures and processing, New York, N.Y., C1

Integrated model for thermo-mechanical controlled process in rod (or bar) rolling

Y Lee, S Choi, P Hodgson

(2002), Vol. 125, pp. 678-688, Journal of materials processing technology, Amsterdam, The Netherlands, C1

Feasibility study of partial recrystallisation in multi-pass hot deformation process and application to calculation of mean flow stress

S Choi, Y Lee, P Hodgson, J Woo

(2002), Vol. 125, pp. 63-71, Journal of materials processing technology, Amsterdam, Netherlands, C1

Effect of composition and austenite deformation on the transformation characteristics of low-carbon and ultralow-carbon microalloyed steels

P Cizek, B Wynne, C Davies, B Muddle, P Hodgson

(2002), Vol. 33, pp. 1331-1349, Metallurgical and materials transactions A - physical metallurgy and materials science, Warrendale, Pa., C1

The production of ultrafine ferrite during hot torsion testing of a 0.11 Wt Pct C steel

P Hurley, B Muddle, P Hodgson

(2002), Vol. 33, pp. 2985-2993, Metallurgical and materials transactions. A, Physical metallurgy and materials science, Warrendale, Pa., C1

A comparative study of microstructures and mechanical properties obtained by bar and plate rolling

S Choi, Y Lee, P Hodgson

(2002), Vol. 124, pp. 329-336, Journal of materials processing technology, Amsterdam, The Netherlands, C1

A methodology for springback prediction

M Gotzinger, S Kalyanasundaram, M Cardew-Hall, P Hodgson

(2002), Vol. 110, pp. 1181-1186, SAE transactions, New York, N.Y., C1

Effect of alloying elements on the microstructure property relationship in thermomechanically processed C-Mn-Si TRIP steels

I Timokhina, P Hodgson, E Pereloma

(2002), Vol. 73, pp. 274-279, Steel research, Düsseldorf, Germany, C1

Material properties under drawing and extrusion with cyclic torsion

L Kong, L Lin, P Hodgson

(2001), Vol. 308, pp. 209-215, Materials science & engineering. A. Structural materials : properties, microstructure and processing, Lausanne, Switzerland, C1

Prediction of stress-strain behaviors in steels using an integrated constitutive, FEM and ANN model

L Kong, B Wang, P Hodgson

(2001), Vol. 41, pp. 795-800, ISIJ international, Tokyo, Japan, C1

Formation of ultra-fine ferrite in hot rolled strip: potential mechanisms for grain refinement

P Hurley, P Hodgson

(2001), Vol. 302, pp. 206-214, Materials science & engineering. A. Structural materials : properties, microstructure and processing, Lausanne, Switzerland, C1

The production of ultrafine ferrite in low-carbon steel by strain-Induced transformation

M Hickson, P Hurley, R Gibbs, G Kelly, P Hodgson

(2001), Vol. 33, pp. 1019-1026, Metallurgical and materials transactions A : physical metallurgy and materials science, Warrendale, PA, C1-1

Microstructure and mechanical properties of thermomechanically processed C-Si-Mn steels

E Pereloma, I Timokhina, P Hodgson

(2001), Vol. 28, pp. 198-202, Ironmaking and steelmaking, London, England, C1

Effect of process variables on formation of dynamic strain induced ultrafine ferrite during hot torsion testing

P Hurley, P Hodgson

(2001), Vol. 17, pp. 1360-1368, Materials Science and Technology, London, England, C1

Microstructure and mechanical properties of C-Si-Mn(-Nb) TRIP steels after simulated thermomechanical processing

I Timokhina, E Pereloma, P Hodgson

(2001), Vol. 17, pp. 135-140, Materials science and technology, Leeds, England, C1

Identifying variation in sheet metal stamping

M Doolan, S Kalyanasundaram, P Hodgson, M Cardew-Hall

(2001), Vol. 115, pp. 142-146, Journal of materials processing technology, Amsterdam, The Netherlands, C1

A study of deformation substructures in austenite using a model Ni-30 wt.% Fe alloy

P Hurley, P Hodgson, B Muddle

(2001), Vol. 45, pp. 25-32, Scripta materialia, Amsterdam, The Netherlands, C1

Generation and forming of spray-formed flat products

M Doolan, S Kalyanasundaram, P Hodgson, M Cardew-Hall

(2001), Vol. 115, pp. 55-60, Journal of Materials Processing Technology, C1-1

Strain-induced precipitation behaviour in hot rolled strip steel

E Pereloma, B Crawford, P Hodgson

(2001), Vol. 299, pp. 27-37, Materials science and engineering: A, Amsterdam, The Netherlands, C1-1

Nucleation sites for ultrafine ferrite produced by deformation of austenite during single-pass strip rolling

P Hurley, B Muddle, P Hodgson

(2000), Vol. 32, pp. 1507-1517, Metallurgical and materials transactions. A, physical metallurgy and materials science, Warrendale, PA, C1

Predicting flow strength of austenitic steels with an IPANN model using different training strategies

L Kong, P Hodgson

(2000), Vol. 31, pp. 945-954, Advances in engineering software, Amsterdam, The Netherlands, C1-1

Constitutive modelling of extrusion of lead with cyclic torsion

L Kong, P Hodgson

(2000), Vol. 276, pp. 32-38, Materials Science and Engineering A, C1-1

Extrapolative prediction of the hot strength of austenitic steels with a combined constitutive and ANN model

L Kong, P Hodgson, D Collinson

(2000), Vol. 102, pp. 84-89, Journal of materials processing technology, Amsterdam, The Netherlands, C1-1

The changing culture and practice of undergraduate engineering education in Australia

H Briggs, P Hodgson

(2000), Vol. 1, pp. 31-42, British Journal of Engineering Education, C1

Predicting the critical strain for dynamic recrystallization using the kinetics of static recrystallization

M Barnett, G Kelly, P Hodgson

(2000), Vol. 43, pp. 365-369, Scripta materialia, Amsterdam, The Netherlands, C1-1

Posttranscriptional inhibition of class I major histocompatibility complex presentation on hepatocytes and lymphoid cells in chronic woodchuck hepatitis virus infection

T Michalak, P Hodgson, N Churchill

(2000), Vol. 74, pp. 4483-4494, JOURNAL OF VIROLOGY, United States, C1-1

Microstructure and microtexture of ultrafine ferrite formed in 0•1%C steel using new strip rolling process

P Hurley, B Muddle, P Hodgson

(2000), Vol. 16, pp. 1376-1379, Materials Science and Technology, London, Eng., C1-1

Ultrafine ferrite formation during hot strip rolling

P Hurley, G Kelly, P Hodgson

(2000), Vol. 16, pp. 1273-1276, Materials Science and Technology, London, Eng., C1-1

Development of constitutive models for metal forming with cyclic strain softening

L Kong, P Hodgson, B Wang

(1999), Vol. 89-90, pp. 44-50, Journal of Materials Processing Technology, Amsterdam, The Netherlands, C1-1

The application of constitutive and artificial neural network models to predict the hot strength of steels

L Kong, P Hodgson

(1999), Vol. 39, pp. 991-998, ISIJ International, Tokyo, Japan., C1-1

The prediction of the hot strength in steels with an integrated phenomenological and artificial neural network model

P Hodgson, L Kong, C Davies

(1999), Vol. 87, pp. 131-138, Journal of Materials Processing Technology, Amsterdam, The Netherlands, C1-1

Transformation behaviour in thermomechanically processed C-Mn-Si TRIP steels with and without Nb

E Pereloma, I Timokhina, P Hodgson

(1999), Vol. 273-275, pp. 448-452, Materials science and engineering: A, Amsterdam, The Netherlands, C1-1

Effect of preroll quenching and post-roll quenching on production and properties of ultrafine ferrite in steel

M Hickson, P Hodgson

(1999), Vol. 15, pp. 85-90, Materials science and technology, Abingdon, Eng., C1-1

Effect of nitrogen on formation of martensite-austenite constituent in low carbon steels

M Staiger, B Jessop, P Hodgson, A Brownrigg, C Davies

(1999), Vol. 39, pp. 183-190, ISIJ international, Tokyo, Japan, C1-1

Analysis and characterisation of ultra-fine ferrite produced during a new steel strip rolling process

P Hurley, P Hodgson, B Muddle

(1999), Vol. 40, pp. 433-438, Scripta materialia, Kidlington, Eng., C1-1

The effect of chemistry on the formation of ultrafine ferrite in steel

M Hickson, R Gibbs, P Hodgson

(1999), Vol. 39, pp. 1176-1180, ISIJ international, Tokyo, Japan, C1-1

Ultrafine ferrite in low carbon steel

P Hodgson, M Hickson, R Gibbs

(1999), Vol. 40, pp. 1179-1184, Scripta materialia, Kidlington, Eng., C1-1

Room temperature deformation and recrystallisation behaviour of lead and lead-tin alloys in torsion and plane strain compression

S Wong, P Hodgson, P Thomson

(1999), Vol. 15, pp. 689-696, Materials science and technology, Abingdon, Eng., C1-1

Perforin and Fas/Fas ligand-mediated cytotoxicity in acute and chronic woodchuck viral hepatitis

P Hodgson, M Grant, T Michalak

(1999), Vol. 118, pp. 63-70, CLINICAL AND EXPERIMENTAL IMMUNOLOGY, C1-1

Process and product integration: research challenges

P Hodgson, M Cardew-Hall

(1998), Vol. 80-81, pp. 1-7, Journal of materials processing technology, Amsterdam, The Netherlands, C1-1

Characterising frictional behaviour in sheet metal forming

J Lanzon, M Cardew-Hall, P Hodgson

(1998), Vol. 80-81, pp. 251-256, Journal of materials processing technology, Amsterdam, The Netherlands, C1-1

Defining the operating window for an automotive sheet pressing operation

J Herron, P Hodgson, M Cardew-Hall

(1998), Vol. 80-81, pp. 68-75, Journal of materials processing technology, Amsterdam, The Netherlands, C1-1

Improvement of the prediction accuracy and efficiency of hot strength of austenitic steels with optimised ANN training schemes

B Wang, L Kong, P Hodgson, D Collinson

(1998), Vol. 4, pp. 823-826, Metals and materials international, Berlin, Germany, C1-1

The influence of roll speed on the rolling of metal plates

B Wang, W Hu, L Kong, P Hodgson

(1998), Vol. 4, pp. 915-919, Metals and materials, Seoul, Korea, C1-1

Modelling the effect of carbon content on hot strength of steels using a modified artificial neural network

L Kong, P Hodgson, D Collinson

(1998), Vol. 38, pp. 1121-1129, ISIJ international, Tokyo, Japan, C1-1

The effect of transformation path on the final microstructure of high- and low-silicon 0.1 wt.% C steels

E Pereloma, P Hodgson

(1998), Vol. 251, pp. 30-39, Materials science and engineering: A, Amsterdam, The Netherlands, C1-1

The effect of through-thickness strain distribution on the static recrystallization of hot rolled austenitic stainless steel strip

X Zhang, P Hodgson, P Thomson

(1996), Vol. 60, pp. 615-619, Journal of materials processing technology, Amsterdam, The Netherlands, C1-1

Physical modelling with application to metal working, especially to hot rolling

S Wong, P Hodgson, C-J Chong, P Thomson

(1996), Vol. 62, pp. 260-274, Journal of materials processing technology, Amsterdam, The Netherlands, C1-1

Spreadsheet modelling of grain size evolution during rod rolling

T Maccagno, J Jonas, P Hodgson

(1996), Vol. 36, pp. 720-728, ISIJ international, Tokyo, Japan, C1-1

A study of pore closure and welding in hot rolling process

A Wang, P Thomson, P Hodgson

(1996), Vol. 60, pp. 95-102, Journal of materials processing technology, Amsterdam, The Netherlands, C1-1

Microstructure modelling for property prediction and control

P Hodgson

(1996), Vol. 60, pp. 27-33, Journal of materials processing technology, Amsterdam, The Netherlands, C1-1

Comparison of torsion and plane-strain compression for predicting mean yield strength in single-and multiple-pass flat rolling using lead to model hot steel

S Wong, P Hodgson, P Thomson

(1995), Vol. 53, pp. 601-616, Journal of materials processing technology, Amsterdam, The Netherlands, C1-1

The influence of bainite on retained austenite characteristics in Si-Mn TRIP steels

A Hanzaki, P Hodgson, S Yue

(1995), Vol. 35, pp. 79-85, ISIJ international, Tokyo, Japan, C1-1

Hot deformation characteristics of Si-Mn TRIP steels with and without Nb microalloy additions

A Hanzaki, P Hodgson, S Yue

(1995), Vol. 35, pp. 324-331, ISIJ international, Tokyo, Japan, C1-1

Post-dynamic recrystallisation after multiple peak dynamic recrystallisation in C-Mn steels

C Roucoules, P Hodgson

(1995), Vol. 11, pp. 548-556, Materials science and technology, Abingon, Eng., C1-1

Modelling the thermomechanical and microstructural evolution during rolling of a Nb HSLA steel

M Pietrzyk, C Roucoules, P Hodgson

(1995), Vol. 35, pp. 531-541, ISIJ international, Tokyo, Japan, C1-1

Use of lead to develop models for the deformation behaviour of steel at elevated temperature

C Roucoules, I Boyadjev, P Hodgson, B Parker

(1994), Vol. 45, pp. 447-452, Journal of materials processing technology, Amsterdam, The Netherlands, C1-1

Softening and microstructural change following the dynamic recrystallization of austenite

C Roucoules, P Hodgson, S Yue, J Jonas

(1994), Vol. 25, pp. 389-400, Metallurgical and materials transactions A, Berlin, Germany, C1-1

Continuous cooling deformation testing of steels

A Hanzaki, R Pandi, P Hodgson, S Yue

(1993), Vol. 24, pp. 2657-2665, Metallurgical and materials transactions A, New York, N.Y., C1-1

CONTINOUS COOLING DEFORMATION TESTING OF STEELS

A HANZAKI, R PANDI, P HODGSON, S YUE

(1993), Vol. 24A, pp. 2657-2665, Metallurgical Transactions A, Berlin, Germany, C1-1

Ferrite grain coarsening during transformation of thermomechanically processed C-Mn-Nb austenite

R Priestner, P Hodgson

(1992), Vol. 8, pp. 849-854, Materials Science and Technology (United Kingdom), London, Eng., C1-1

A mathematical model to predict the mechanical properties of hot rolled C-Mn and microalloyed dteels

P Hodgson, R Gibbs

(1992), Vol. 32, pp. 1329-1338, ISIJ International, Tokyo, Japan, C1-1

Design of dynamic recrystallisation controlled rolling schedules for seamless tube rolling

L Pussegoda, P Hodgson, J Jonas

(1992), Vol. 8, pp. 63-71, Materials, science and technology, Abingdon, Eng., C1-1