Master of Professional Practice (Engineering) (T3 2020)

Postgraduate coursework

The Master of Professional Practice (Engineering) is designed for experienced Engineering professionals seeking further career advancement.

This is the Trimester 3, 2020 version of this course.

The Trimester 3 teaching period starts from 9 November 2020.

Applications for this course close 6 November 2020.

Key facts

English language requirements

Overall IELTS score of 6.5 with no band less than 6 (or equivalent). More information is available at www.ielts.org

Duration

2 - 2.5 years part-time

Campuses

Current Deakin Students

To access your official course details for the year you started your degree, please visit the handbook

Course information

This innovative program awards a Masters qualification largely based on recognition of professional practice and is designed for experienced engineering professionals seeking further career advancement.  Completion of this degree recognises the discipline-based knowledge and skills developed by professionals in the workplace, offering employers and professionals an alternative, to a traditional higher Master's degree.

Read More

Course structure

To qualify for the Master of Professional Practice (Engineering), students must successfully complete 3 core units (totalling 4 credit points) of formal study and 10 Professional Practice credentials.  Each Professional Practice credential will assess the performance at a masters (advanced) level in one of the Deakin Graduate Learning Outcomes contextualised to Engineering. 

The course comprises the following:

  • 3 core units (totalling 4 credit points)
  • Completion of STP050 Academic Integrity (0-credit point compulsory unit)
  • 10 Professional Practice Credentials (Advanced Level)

Students are required to meet the University's academic progress and conduct requirements. Click here for more information.

3

Compulsory units

10

Professional Practice Credentials

13

Total

Core

  • Academic Integrity (0 credit points)
  • Introduction to Engineering Professional Practice
  • Engineering Entrepreneurship
  • Mastery of Engineering (2cp)
  • Credentials

    Plus 10 Professional Practice Credentials (completed at the advanced level) as follows. Students are able to commence their credentials at anytime, utilising Deakin’s Start Anytime calendar. Learn more about the details of each credential (PDF, 1.9MB)   

    Credential Code

    Professional Practice Credentials

    Minimum level

    CRCOM-A1

    Communication (Masters-aligned)

    Advanced

    CRDIL-A1

    Digital literacy (Masters-aligned)

    Advanced

    CRCRI-A1

    Critical thinking (Masters-aligned)

    Advanced

    CRPSV-A1

    Problem solving (Masters-aligned)

    Advanced

    CRSMA-A1

    Self-management (Masters-aligned)

    Advanced

    CRTWK-A1

    Teamwork (Masters-aligned)

    Advanced

    CRGCZ-A1

    Global citizenship (Masters-aligned)

    Advanced

    CRPRE-A1

    Professional ethics (Masters-aligned)

    Advanced

    Knowledge based credentials:

    CRENG-A1

    Engineering Professional Expertise 1 (Masters-aligned)

    Advanced

    CRENG-A2

    Engineering Professional Expertise 2 (Masters-aligned)

    Advanced

    Key information

    Award granted
    Master of Professional Practice (Engineering)
    Year

    2020 course information

    Deakin code
    S788
    Level
    Higher Degree Coursework (Masters and Doctorates)
    Approval status

    This course is approved by the University under the Higher Education Standards Framework.

    Australian Qualifications Framework (AQF) recognition

    The award conferred upon completion is recognised in the Australian Qualifications Framework at Level 9.

    Campuses by intake

    Campus availability varies per trimester. This means that a course offered in Trimester 1 may not be offered in the same location for Trimester 2 or 3. Read more to learn where this course will be offered throughout the year.

    Trimester 1 - March

    Trimester 2 - July

    Trimester 3 - November

    INTERNATIONAL STUDENTS: due to Australian Government regulations, student visas to enter Australia cannot be issued to students who enrol in this fully online degree through Deakin’s Cloud Campus.

    Additional course information

    Course duration - additional information

    Course duration may be affected by delays in completing course requirements, such as accessing or completing work placements

    Mandatory student checks

    Any unit which contains work integrated learning, a community placement or interaction with the community may require a police check, Working with Children Check or other check.

    Workload

    Successful students typically spend about 150 hours in learning and assessment for each one credit point unit. The time required to prepare evidence for credential assessment varies based on the student’s existing documentation.

    Participation requirements

    Reasonable adjustments to participation and other course requirements will be made for students with a disability. Click here for more information.

    Work experience

    SEP702 Mastery of Engineering is designed for students to undertake a workplace research project with a view to theorise their own engineering knowledge, skills, and professional practice.

    Entry requirements

    Entry information

    Deakin University offers admission to postgraduate courses through a number of Admission categories. To be eligible for admission to this program, applicants must meet the course requirements.

    All applicants must meet the minimum English language requirements.

    Please note that meeting the minimum admission requirements does not guarantee selection, which is based on merit, likelihood of success and availability of places in the course.

    For more information on the Admission Criteria and Selection (Higher Education Courses) Policy visit the Deakin Policy Library

    • Attainment of Bachelor Degree AND at least five years relevant work experience (or part-time equivalent) OR
    • Attainment of associated Graduate Certificate of Professional Practice.

    IELTS / English language requirements

    Please note that English language requirements exist for entry to this course and you will be required to meet the English language level requirement that is applicable in the year of your commencement of studies.

    It is the students’ responsibility to ensure that she/he has the required IELTS score to register with any external accredited courses.  (more details)

    Recognition of prior learning

    If you have completed previous studies which you believe may reduce the number of units you have to complete at Deakin, indicate in the appropriate section on your application that you wish to be considered for Recognition of Prior Learning. You will need to provide a certified copy of your previous course details so your credit can be determined. If you are eligible, your offer letter will then contain information about your Recognition of Prior Learning.
    Your Recognition of Prior Learning is formally approved prior to your enrolment at Deakin during the Enrolment and Orientation Program. You must bring original documents relating to your previous study so that this approval can occur.

    You can also refer to the Recognition of Prior Learning System which outlines the credit that may be granted towards a Deakin University degree.

    Fees and scholarships

    Fee information

    Estimated fee rate

    $13,900 tuition fees plus $4,950 for Professional Practice Credentials
    Learn more about fees and your options for paying.

    The ‘Estimated tuition fee’ is provided as a guide only based on a typical enrolment of students completing this course within the same year in which they started. The cost will vary depending on your study load, the length of your course and any approved Recognition of Prior Learning you have.

    Learn more about fees and available payment options.

    The course includes a combination of tuition fees for four credit points of study and ten Professional Practice Credentials.

    Professional Practice degrees are designed for those who wish to be credentialed for outcomes towards which they have already made significant progress through their extensive experience in a relevant professional field.

    Scholarship options

    A Deakin scholarship might change your life. If you've got something special to offer Deakin – or you just need the financial help to get you here – we may have a scholarship opportunity for you.

    Search or browse through our scholarships

    Postgraduate bursary

    If you’re a Deakin alumnus commencing a postgraduate award course, you may be eligible to receive a 15% reduction per unit on your enrolment fees. Your Immediate Family Members may also be eligible to apply for this bursary.

    Learn more about Deakin’s 15% postgraduate bursary

    Apply now

    How to apply

    Apply through Deakin

    Applications can be made directly to the University through StudyLink Connect - Deakin University's International Student Application Service. For information on the application process and closing dates, see the How to apply web page. Please note that closing dates may vary for individual courses.

    Deakin International office or Deakin representative

    Fill out the application form and submit to a Deakin International office or take your application form to a Deakin representative for assistance

    Need more information on how to apply?

    For information on the application process and closing dates, see the How to apply webpage
    If you’re still having problems, please contact Deakin International for assistance.

    Entry pathways

    There are currently no pathway or credit arrangements.

    Alternative exits

    • Graduate Certificate of Professional Practice (Engineering) (S588)
    • Graduate Diploma of Professional Practice (Engineering) (S688)

    Why choose Deakin

    Career outcomes

    Engineers Australia logo

     

     

     

     

     

     

    The Master of Professional Practice (Engineering) is designed for experienced engineering professionals seeking to progress their career through a professionally recognised postgraduate qualification.

    Graduates of the Master of Professional Practice (Engineering) will automatically attain Chartered* membership status with Engineers Australia and will also be eligible for registration on the National Engineer Register*. Upon completion of this program, graduates will have demonstrated advanced skills and complex knowledge in their engineering area of practice.

    *Both Chartered and NER credentials will be applied in the appropriate Engineers Australia occupational category Professional Engineer or Engineering Technologist based on the candidate’s undergraduate qualification. 

    Professional recognition

    Graduates of the Master of Professional Practice (Engineering) will automatically be given professional registration as a professional engineer (National Engineers Register), and attain Engineers Australia Chartered membership status, providing them a clear path to Chartered and independent practice as an engineering professional.

    Course learning outcomes

    Deakin's graduate learning outcomes describe the knowledge and capabilities graduates can demonstrate at the completion of their course. These outcomes mean that regardless of the Deakin course you undertake, you can rest assured your degree will teach you the skills and professional attributes that employers value. They'll set you up to learn and work effectively in the future.

    Deakin Graduate Learning Outcomes

    Course Learning Outcomes

    Discipline-specific knowledge and capabilities

    Demonstrate an integrated understanding and superior ability to apply contemporary Engineering theory and practices.

    Communication

    Use advanced communication tools, techniques and media to engage and inspire others about engineering professional practice.

    Digital literacy

    Discover, analyse, synthesise and disseminate complex engineering information, data and ideas to stakeholders, strategic partners and professional colleagues using a range of digital technologies and channels.

    Critical thinking

    Systematically and critically analyse and test engineering models and theories to develop optimum engineering solutions.

    Problem solving

    Apply advanced problem- solving skills to conceptualise, design, construct and advocate for recommended solutions for complex engineering related issues.

    Self-management

    Advance personal development and capacity as a leader to proactively drive and take responsibility for strategic results.

    Teamwork

    Work across a range of professions, functions, contexts or teams to optimise collaborative outcomes.

    Global citizenship

    Define and reinforce the vision and values that orient collective effort, socially responsibility and ethical decision making.

    Approved by Faculty Board 27 June 2019