Dr Lu Jiang

Phase transformation in additively manufactured Co-Cr-Mo alloy after solution and aging heat treatment

J Pasco, L Jiang, T Dorin, A Keshavarzkermani, Y He, C Aranas

(2024), Vol. 207, pp. 1-14, Materials Characterization, Amsterdam, The Netherlands, C1

Enhancing the strength and sensitization resistance of 5xxx alloys via nanoscale clustering induced by room-temperature cyclic plasticity

Y Zhang, Y Zhu, R Marceau, L Jiang, L Wang, X Gao, Q Zhang, L Hu, R Zhang, C Hutchinson, W Sun

(2024), Vol. 227, pp. 1-12, Corrosion Science, Amsterdam, The Netherlands, C1

Material characterisation of anodising effects on small fatigue crack nucleation in AA7XXX alloys

B Main, L Jiang, R Marceau, S Barter

(2024), Vol. 33, pp. 1-11, Materialia, Amsterdam, The Netherlands, C1

Effect of Extrusion Temperature on the Microsturcture in a Bismuth Modified Magnesium Alloy

T Guo, Y Tai, L Jiang, Z Zhang, J Wang

(2024), Metals and Materials International, Berlin, Germany, C1

Selectively Adsorbed Mercaptoethanesulfonic Acid on Au/TiO₂ Enhances the Yield and Selectivity of Photocatalytic Reduction of Carbon Dioxide

Mengdan Guan, Junjie Wang, Zhongyan Gong, Kun Gao, Xing Kang, Yulong Zhang, Chengcheng Zhu, Zhihao Lu, Xinya Chen, Lu Jiang, Qinghua Liu, Haonan Chen, Liuyingzi Yu, Kaili Wang, Zhuoyao Li, Gang Lu

(2024), Vol. 7, pp. 1329-1339, ACS APPLIED ENERGY MATERIALS, C1-1

Novel Coffee Certified Reference Material for Ochratoxin A, B, and C

Tao Lin, Lu Jiang, Wei Cai, Jialan Li, Lijuan Du, Jing Wang, Zhengxu Hu, Jinliang Shao, Liu Hongcheng

(2024), Vol. 57, pp. 1054-1064, ANALYTICAL LETTERS, C1-1

Enhanced precipitation kinetics in non-stretched Al-Cu-Li-Mg-Ag-(Sc)-(Zr) alloys

L Jiang, K Mester, R Knott, K Wood, A Sokolova, T Langan, M Barnett, T Dorin

(2023), Vol. 229, pp. 1-6, Scripta Materialia, Amsterdam The Netherlands, C1

Improved Photo-Excited Carriers Transportation of WS2-O-Doped-Graphene Heterostructures for Solar Steam Generation

L Wang, G Yang, L Jiang, Y Ma, D Liu, J Razal, W Lei

(2023), Vol. 19, pp. 1-7, Small, London, Eng., C1

The effect of the calibration method on the critical forming strains and fracture limits in the roll forming of 7075 series aluminium

M Weiss, A Sreenivas, H Jeganathan, L Jiang, P Zhang, B Oxley, B Abeyrathna

(2023), Vol. 316, pp. 1-17, Journal of Materials Processing Technology, London, Eng., C1

Impact of dispersoids' distribution on portevin-le-chatelier effect and surface quality in Al-Mg-Sc-Zr alloys

F Bakare, L Jiang, T Langan, M Weiss, T Dorin

(2023), Vol. 875, pp. 1-11, Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, Amsterdam, The Netherlands, C1

Precipitation Behaviour at the Interface of an Additively Manufactured M789-N709 Hybrid Alloy

K Nyamuchiwa, Y Tian, K Chadha, L Jiang, T Dorin, C Aranas

(2023), Acta Metallurgica Sinica (English Letters), C1

Unusual interface phase transformation during continuous additive manufacturing of maraging steel and Co-30Cr-7Mo alloy

J Pasco, Y Tian, K Chadha, L Jiang, T Dorin, C Aranas

(2023), Vol. 881, pp. 145336-145336, Materials Science and Engineering: A, C1

Revisiting Precipitation kinetics in Mg-Zn alloy - a multi-characterization and modeling study

Y Yang, V Massardier, M Ferdowsi, L Jiang, J Wang, T Dorin, S Kada, M Barnett, M Perez

(2023), Vol. 260, pp. 1-15, Acta Materialia, Amsterdam, The Netherlands, C1

An investigation into the role of non-metallic inclusions in cleavage fracture of medium carbon pearlitic steels for high-speed railway wheel

S Zhou, Z Li, L Jiang, X Wang, P Xu, Y Ma, Y Yan, C Yang, Q Yong

(2022), Vol. 131, pp. 1-20, Engineering Failure Analysis, Amsterdam, The Netherlands, C1

Isotropy of precipitate distribution in pre-stretched Al-Cu-(Sc)-(Zr) alloys

L Jiang, T Langan, T Wood, P Sanders, T Dorin

(2022), Vol. 210, pp. 1-6, Scripta Materialia, Amsterdam, The Netherlands, C1

Advanced 2D-2D heterostructures of transition metal dichalcogenides and nitrogen-rich nitrides for solar water generation

L Wang, D Liu, L Jiang, Y Ma, G Yang, Y Qian, W Lei

(2022), Vol. 98, pp. 1-8, Nano Energy, Amsterdam, The Netherlands, C1

Strengthening mechanisms in a new precipitation hardening stainless steel fabricated by laser powder bed fusion

K Chadha, Y Tian, L Jiang, T Dorin, J Spray, C Aranas

(2022), MRS Communications, Berlin, Germany, C1

Effect of Yttrium on the Microstructure and Mechanical Properties of PH13-8Mo Stainless Steels Produced by Selective Laser Melting

C Wang, C Liu, M Zhang, L Jiang, Y Liu, Z Liu, J Liang

(2022), Vol. 15, pp. 1-14, Materials, Basel, Switzerland, C1

Effect of V on the Precipitation Behavior of Ti-Mo Microalloyed High-Strength Steel

R Han, G Yang, D Xu, L Jiang, Z Fu, G Zhao

(2022), Vol. 15, Materials, Switzerland, C1

Precipitation in AA6063 produced from swarf using additive friction stir deposition

S Babaniaris, L Jiang, R Varma, E Farabi, T Dorin, M Barnett, D Fabijanic

(2022), Vol. 3, pp. 100096-100096, Additive Manufacturing Letters, C1

Precipitation sequence in Al-Sc-Zr alloys revisited

T Dorin, S Babaniaris, L Jiang, A Cassel, A Eggeman, J Robson

(2022), Vol. 26, Materialia, C1

Coupled segregation mechanisms of Sc, Zr and Mn at θ^′ interfaces enhances the strength and thermal stability of Al-Cu alloys

L Jiang, B Rouxel, T Langan, T Dorin

(2021), Vol. 206, Acta Materialia, C1

The impact of L12 dispersoids and strain rate on the Portevin-Le-Chatelier effect and mechanical properties of Al-Mg alloys

F Bakare, L Schieren, B Rouxel, L Jiang, T Langan, A Kupke, M Weiss, T Dorin

(2021), Vol. 811, Materials Science and Engineering A, C1

Stability and stoichiometry of L12 Al3(Sc,Zr) dispersoids in Al-(Si)-Sc-Zr alloys

T Dorin, S Babaniaris, L Jiang, A Cassel, C Race, A Eggeman, D Kelly, S Haigh, J Robson

(2021), Vol. 216, Acta Materialia, C1

The effect of heat treatments on mechanical properties of M789 steel fabricated by laser powder bed fusion

Y Tian, R Palad, L Jiang, T Dorin, K Chadha, C Aranas

(2021), Vol. 885, Journal of Alloys and Compounds, C1

Superior low temperature toughness in a newly designed low Mn and low Ni high strength steel

L Jiang, J Wang, T Zhang, T Dorin, X Sun

(2021), Vol. 825, Materials Science and Engineering A, C1

Tailored precipitation route for the effective utilisation of Sc and Zr in an Al-Mg-Si alloy

S Babaniaris, M Ramajayam, L Jiang, T Langan, T Dorin

(2020), Vol. 10, Materialia, C1

Formation mechanism of (TiNb)C surface reinforced layer by in-situ solid-state carbonization reaction

J Zhu, L Zhong, Z Zhao, N Zhao, L Jiang, Y Xu

(2020), Vol. 393, Surface and Coatings Technology, C1

The effect of molybdenum on interphase precipitation at 700 °C in a strip-cast low-carbon niobium steel

L Jiang, R Marceau, T Dorin, K Wood, P Hodgson, N Stanford

(2020), Vol. 166, Materials Characterization, C1

Effect of Al3(Sc,Zr) dispersoids on the hot deformation behaviour of 6xxx-series alloys: A physically based constitutive model

S Babaniaris, M Ramajayam, L Jiang, R Varma, T Langan, T Dorin

(2020), Vol. 793, Materials Science and Engineering A, C1

The effect of molybdenum on precipitation behaviour in austenite of strip-cast steels containing niobium

L Jiang, R Marceau, T Dorin, H Yin, X Sun, P Hodgson, N Stanford

(2020), Vol. 10, pp. 1-12, Metals, C1

Effect of molybdenum on phase transformation and microstructural evolution of strip cast steels containing niobium

L Jiang, R Marceau, T Dorin, P Hodgson, N Stanford

(2019), Vol. 54, pp. 1769-1784, Journal of materials science, Cham, Switzerland, C1

Mechanically stretchable piezoelectric polyvinylidene fluoride (PVDF)/Boron nitride nanosheets (BNNSs) polymer nanocomposites

J Zhang, D Liu, Q Han, L Jiang, H Shao, B Tang, W Lei, T Lin, C Wang

(2019), Vol. 175, Composites Part B: Engineering, C1

Precipitation sequence in Al-Mg-Si-Sc-Zr alloys during isochronal aging

T Dorin, M Ramajayam, S Babaniaris, L Jiang, T Langan

(2019), Vol. 8, Materialia, C1

The effect of molybdenum on clustering and precipitation behaviour of strip-cast steels containing niobium

L Jiang, R Marceau, B Guan, T Dorin, K Wood, P Hodgson, N Stanford

(2019), Vol. 8, Materialia, C1

Temperature-Induced Complex Refractive Index of Single-Walled Carbon Nantubes Detection Using a Coated In-Fiber Mach-Zehnder Interferometer

Lijun Li, Shunshun Gong, Qian Ma, Maoyong Cao, Lu Jiang, Wenxian Li, Lin Xu, Yilin Liu, Xiaoli Guo, Xiaozhe Ding

(2017), Vol. 9, pp. 1681-1687, Nanoscience and Nanotechnology Letters, Stevenson Ranch, Calif., C1

Study of Interference Wavelength Characteristics of Fiber Bragg Grating Modulated All-Fiber Inline Mach-Zehnder Interferometer

Lijun Li, Qian Ma, Yan Zhang, Maoyong Cao, Guina Zhang, Lu Jiang, Chunting Gao, Jia Yao, Yidan Li, Shunshun Gong, Wenxian Li

(2017), Vol. 29, pp. 15-21, Sensors and Materials, Tokyo, Japan, C1-1

High stability Michelson refractometer based on an in-fiber interferometer followed with a Faraday rotator mirror

Lijun Li, Qian Ma, Maoyong Cao, Guina Zhang, Yan Zhang, Lu Jiang, Chunting Gao, Jia Yao, Shunshun Gong, Wenxian Li

(2016), Vol. 234, pp. 674-679, Sensors and Actuators B: Chemical: international journal devoted to research and development of physical and chemical transducers, Amsterdam, The Netherlands, C1-1

Effects of intercritical tempering temperature on formation of metastable austenite and mechanical properties of Mn-Mo series microalloyed steel

L Jiang, X Sun, Z Li, Q Yong, C Wang

(2015), Vol. 43, pp. 1-7, Cailiao Gongcheng/Journal of Materials Engineering, Bejing, China, C1-1

Effects of tempering temperature on morphology of metastable austenite and mechanical properties of Mn-Ni steel

L Jiang, X Sun, Z Li, Q Yong

(2014), Vol. 49, pp. 59-64, Iron and Steel, China, C1

Effect of bainitic transformation temperature on the microstructures and mechanical properties of the hot rolled trip steel containing Ti and Mo and its precipitation characteristics

C Wang, X Sun, Q Yong, Z Li, X Zhang, L Jiang

(2013), Vol. 49, pp. 399-407, Jinshu Xuebao/Acta Metallurgica Sinica, Beijing, China, C1