Dr Hossein Beladi

The role of parent austenite grain size on the variant selection and intervariant boundary network in a lath martensitic steel

A Mirzaei, P Hodgson, X Ma, V Peterson, E Farabi, G Rohrer, H Beladi

(2024), Vol. 889, pp. 1-22, Materials Science & Engineering: A, Amsterdam, The Netherlands, C1

New Insight into Toughness Enhancement in a Lath Martensitic Steel

A Mirzaei, C Barrett, X Ma, P Hodgson, H Beladi

(2024), Metallurgical and Materials Transactions A, Berlin, Germany, C1

Yield point phenomenon in low-alloyed TRIP-aided steel: role of retained austenite

R Ranjan, H Beladi, P Hodgson, S Singh

(2023), Vol. 39, pp. 85-93, Materials Science and Technology (United Kingdom), C1

The influence of γ-fibre texture on the grain boundary character distribution of an IF-steel

H Beladi, V Tari, A Rollett, G Rohrer

(2023), Vol. 222, Scripta Materialia, C1

The influence of processing and texture on the grain boundary character distribution of an austenitic Ni-30Fe alloy

H Beladi, Q Chao, V Tari, A Rollett, G Rohrer

(2023), Vol. 197, pp. 1-8, Materials Characterization, Amsterdam, The Netherlands, C1

The effect of quenching on the hinderance of the NbC growth process in a model microalloyed steel

D Poddar, P Cizek, H Beladi, P Hodgson

(2023), pp. 1-15, Philosophical Magazine, London, Eng., C1

Facile electrochemical anodisation for generating nanopores across visible light-responsive cerium-titanium oxide heterojunctions for environmental remediation

M Laghaei, Y Wang, A Rashed, H Beladi, L Kong

(2023), Vol. 11, pp. 1-13, Journal of Environmental Chemical Engineering, Amsterdam, The Netherlands, C1

The effect of Ti-Mo additions on microstructural evolution and superplastic deformation behavior of cold-rolled medium Mn steels

H Zhang, H Li, H Yan, S Tang, H Beladi, P Hodgson, M Cai

(2023), Vol. 203, pp. 1-12, Materials Characterization, Amsterdam, The Netherlands, C1

Improved Mn-segregation bands and its influence on deformation behavior in a severely warm-rolled 10Mn lightweight steel

S Sun, H Li, H Huang, H Ding, H Beladi, P Hodgson, M Cai

(2023), Vol. 216, pp. 1-10, Vacuum, Amsterdam, The Netherlands, C1

Interface characteristics and precipitation during the austenite-to-ferrite transformation of a Ti-Mo microalloyed steel

I Bikmukhametov, H Beladi, J Wang, V Tari, A Rollett, P Hodgson, I Timokhina

(2022), Vol. 893, pp. 1-12, Journal of Alloys and Compounds, Amsterdam, The Netherlands, C1

Microstructure evolution of 316L stainless steel during solid-state additive friction stir deposition

H Beladi, E Farabi, P Hodgson, M Barnett, G Rohrer, D Fabijanic

(2022), Vol. 102, pp. 618-633, Philosophical Magazine, London, Eng., C1

The influence of parent austenite characteristics on the intervariant boundary network in a lath martensitic steel

A Mirzaei, R Ghaderi, P Hodgson, X Ma, G Rohrer, H Beladi

(2022), Vol. 57, pp. 8904-8923, Journal of Materials Science, Berlin, Germany, C1

On the propensity of lath martensite intervariant boundaries to hydrogen absorption using molecular statics simulation

A Mirzaei, C Barrett, X Ma, P Hodgson, H Beladi

(2022), Vol. 25, Materialia, C1

Texture and Grain Boundary Network Evolution of Laser Powder Bed Fusion Processed Pure Ni During Post-printing Annealing

H Beladi, H Torbati-Sarraf, G Rohrer, B Poorganji, S Torbati-Sarraf

(2022), Vol. 53, pp. 3749-3758, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

On Σ9 grain boundary plane orientation

H Beladi, V Tari, G Rohrer

(2022), Vol. 25, Materialia, C1

Interphase precipitation hardening of a TiMo microalloyed dual-phase steel produced by continuous cooling

J Wang, H Beladi, L Pan, F Fang, J Hu, L Kong, P Hodgson, I Timokhina

(2021), Vol. 804, Materials Science and Engineering A, C1

Precipitation reactions in 12Cr-3Ni-3Mn-3Cu-0.15Nb steel

V Govindaraj, P Hodgson, R P Singh, H Beladi

(2021), Vol. 808, Materials Science and Engineering A, C1

The role of thermomechanical processing routes on the grain boundary network of martensite in Ti-6Al-4V

E Farabi, V Tari, P Hodgson, G Rohrer, A Rollett, H Beladi

(2021), Vol. 822, Materials Science and Engineering A, C1

The Effect of Strain and Annealing on the Growth of NbC Precipitates During Two-Pass Hot Deformation of a Fe-30Ni-Nb Model Microalloyed Steel

D Poddar, P Cizek, H Beladi, P Hodgson

(2021), Vol. 52, pp. 4357-4367, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

Effect of manganese on the grain boundary network of lath martensite in precipitation hardenable stainless steels

V Govindaraj, E Farabi, S Kada, P Hodgson, R P Singh, G Rohrer, H Beladi

(2021), Vol. 886, Journal of Alloys and Compounds, C1

Grain boundary energy function for α iron

R Sarochawikasit, C Wang, P Kumam, H Beladi, T Okita, G Rohrer, S Ratanaphan

(2021), Vol. 19, Materialia, C1

The Mechanical Properties of Low Alloy TRIP-Aided Steel: The Role of Retained Austenite

R Ranjan, H Beladi, P Hodgson, S Singh

(2021), Vol. 52, pp. 4649-4663, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

Tailoring the deformation characteristics of commercial purity titanium through hot deformation of a martensitic microstructure

Q Chao, I Sabirov, T Guo, P Hodgson, H Beladi

(2021), Vol. 827, Materials Science and Engineering A, C1

On the grain boundary network characteristics in a dual phase steel

Prashant Pathak, Ilana Timokhina, Subrata Mukherjee, Gregory Rohrer, Hossein Beladi

(2021), Vol. 56, pp. 19674-19686, Journal of Materials Science, Berlin, Germany, C1

The effect of austenite reversion on the microstructure and mechanical properties of a 12Cr-3Ni-3Mn-3Cu-0.15Nb-0.05C maraging stainless steel

V Govindaraj, P Hodgson, R P Singh, H Beladi

(2021), Vol. 828, Materials Science and Engineering A, C1

Outstanding Mild Wear Performance of Ti-29Nb-14Ta-4.5Zr Alloy Through Subsurface Grain Refinement and Supporting Effect of Transformation Induced Plasticity

F Haftlang, A Zarei-Hanzaki, H Abedi, J Málek, E Farabi, H Beladi

(2020), Vol. 26, pp. 467-476, Metals and Materials International, C1

Five-parameter grain boundary characterisation of randomly textured AZ31 Mg alloy

H Beladi, A Ghaderi, G Rohrer

(2020), Vol. 100, pp. 456-466, Philosophical magazine, Abingdon, Eng., C1

New insights into the interface characteristics of a duplex stainless steel subjected to accelerated ferrite-to-austenite transformation

N Haghdadi, P Cizek, P Hodgson, Y He, B Sun, J Jonas, G Rohrer, H Beladi

(2020), Vol. 55, pp. 5322-5339, Journal of Materials Science, Berlin, Germany, C1

EBSD Investigation to Study the Restoration Mechanism and Substructural Characteristics of 23Cr-6Ni-3Mo Duplex Stainless Steel During Post-deformation Annealing

P Kumar, P Hodgson, H Beladi, M Makhatha, A Dutt

(2020), Vol. 73, pp. 1421-1431, Transactions of the Indian Institute of Metals, Berlin, Germany, C1

Influence of C content and annealing temperature on the microstructures and tensile properties of Fe-13Mn-8Al-(0.7, 1.2)C steels

D Han, H Ding, D Liu, B Rolfe, H Beladi

(2020), Vol. 785, Materials Science and Engineering A, C1

On the grain boundary network characteristics in a martensitic Ti-6Al-4V alloy

E Farabi, V Tari, P Hodgson, G Rohrer, H Beladi

(2020), Vol. 55, pp. 15299-15321, Journal of materials science, Cham, Switzerland, C1

Neutron diffraction analysis of stress and strain partitioning in a two-phase microstructure with parallel-aligned phases

Q Huang, R Shi, O Muránsky, H Beladi, S Kabra, C Schimpf, O Volkova, H Biermann, J Mola

(2020), Vol. 10, Scientific Reports, England, C1

The role of phase transformation mechanism on the grain boundary network in a commercially pure titanium

E Farabi, V Tari, P Hodgson, G Rohrer, H Beladi

(2020), Vol. 169, Materials Characterization, C1

Effect of pre-deformation mode on the microstructures and mechanical properties of Hadfield steel

F Zhang, C Chen, B Lv, H Ma, E Farabi, H Beladi

(2019), Vol. 743, pp. 251-258, Materials Science and Engineering A, C1

The effect of phase transformation route on the intergranular corrosion susceptibility of 2205 duplex stainless steel

N Haghdadi, M Laleh, A Kosari, M Moayed, P Cizek, P Hodgson, H Beladi

(2019), Vol. 238, pp. 26-30, Materials letters, Amsterdam, The Netherlands, C1

A microstructural based constitutive approach for simulating hot deformation of Ti6Al4V alloy in the α + β phase region

P Souza, J Mendiguren, Q Chao, H Beladi, P Hodgson, B Rolfe

(2019), Vol. 748, pp. 30-37, Materials Science and Engineering A, C1

Atomistic simulations of grain boundary energies in austenitic steel

S Ratanaphan, R Sarochawikasit, N Kumanuvong, S Hayakawa, H Beladi, G Rohrer, T Okita

(2019), Vol. 54, pp. 5570-5583, Journal of materials science, New York, N.Y., C1

Microstructure dependence of impact toughness in duplex stainless steels

N Haghdadi, P Cizek, P Hodgson, H Beladi

(2019), Vol. 745, pp. 369-378, Materials Science and Engineering A, C1

The effect of strain on interphase precipitation characteristics in a Ti-Mo steel

I Bikmukhametov, H Beladi, J Wang, P Hodgson, I Timokhina

(2019), Vol. 170, pp. 75-86, Acta materialia, Amsterdam, The Netherlands, C1

Microstructural evolution and mechanical properties of accumulative back extruded duplex (α + β) brass

E Farabi, A Zarei-Hanzaki, M Moghaddam, P Hodgson, H Beladi

(2019), Vol. 152, pp. 101-114, Materials Characterization, C1

Hydrogen depth profiles and microhardness of electrochemically hydrogen-charged nanostructured bainitic steels

O Kazum, M Ionescu, H Beladi, M Kannan

(2019), Vol. 44, pp. 14064-14069, International journal of hydrogen energy, Amsterdam, The Netherlands, C1

Effect of initial microstructure and beta phase evolution on dynamic recrystallization behaviour of Ti6Al4V alloy - an EBSD based investigation

P Souza, P Hodgson, B Rolfe, R Singh, H Beladi

(2019), Vol. 793, pp. 467-479, Journal of alloys and compounds, Amsterdam, The Netherlands, C1

One-step quenching and partitioning treatment of a tailor welded blank of boron and TRIP steels for automotive applications

H Kong, Q Chao, B Rolfe, H Beladi

(2019), Vol. 174, Materials and Design, C1

Effect of Muscat Oilfield Brine on the Stressed X-70 Pipeline Steel

P Okonkwo, F Ahmad, B Hossein

(2019), Vol. 164, pp. 126-131, Vacuum, C1

Abrasive Wear Resistance of Ferrous Microstructures with Similar Bulk Hardness Levels Evaluated by a Scratch-Tester Method

B Narayanaswamy, A Ghaderi, P Hodgson, P Cizek, Q Chao, M Safi, H Beladi

(2019), Vol. 50, pp. 4839-4850, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

Development of New Third-Generation Medium Manganese Advanced High-Strength Steels Elaborating Hot-Rolling and Intercritical Annealing

M Emami, M Askari-Paykani, E Farabi, H Beladi, H Shahverdi

(2019), Vol. 50, pp. 4261-4274, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

Formation of ultrafine grained structure in plain carbon steels through thermomechanical processing

Hossein Beladi, Georgina Kelly, Peter Hodgson

(2019), Vol. 64, pp. 83-92, Zavarivanje i zavarene konstrukcije, Beograd, Serbia, C1-1

Effect of ferrite-to-austenite phase transformation path on the interface crystallographic character distributions in a duplex stainless steel

N Haghdadi, P Cizek, P Hodgson, V Tari, G Rohrer, H Beladi

(2018), Vol. 145, pp. 196-209, Acta materialia, Amsterdam, The Netherlands, C1

Five-parameter crystallographic characteristics of the interfaces formed during ferrite to austenite transformation in a duplex stainless steel

N Haghdadi, P Cizek, P Hodgson, V Tari, G Rohrer, H Beladi

(2018), Vol. 98, pp. 1284-1306, Philosophical magazine, Abingdon, Eng., C1

Microstructure Evolution and Mechanical Behavior of a CMnSiAl TRIP Steel Subjected to Partial Austenitization Along with Quenching and Partitioning Treatment

H Kong, Q Chao, M Cai, E Pavlina, B Rolfe, P Hodgson, H Beladi

(2018), Vol. 49, pp. 1509-1519, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

Second-phase hardening and rule of mixture, microbands and dislocation hardening in Fe67.4-xCr15.5Ni14.1Si3.0Bx (x = 0, 2) alloy systems

M Askari-Paykani, H Shahverdi, R Miresmaeili, H Beladi

(2018), Vol. 715, pp. 214-225, Materials Science and Engineering A, C1

The Role of Grain Orientation and Grain Boundary Characteristics in the Mechanical Twinning Formation in a High Manganese Twinning-Induced Plasticity Steel

V Shterner, I Timokhina, A Rollett, H Beladi

(2018), Vol. 49, pp. 2597-2611, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

Strain hardening and nanocrystallization behaviors in Hadfield steel subjected to surface severe plastic deformation

C Chen, B Lv, X Feng, F Zhang, H Beladi

(2018), Vol. 729, pp. 178-184, Materials Science and Engineering A, C1

Five-parameter intervariant boundary characterization of martensite in commercially pure titanium

E Farabi, P Hodgson, G Rohrer, H Beladi

(2018), Vol. 154, pp. 147-160, Acta materialia, Amsterdam, The Netherlands, C1

An Analysis on the Constitutive Models for Forging of Ti6Al4V Alloy Considering the Softening Behavior

P Souza, H Beladi, R Singh, P Hodgson, B Rolfe

(2018), Vol. 27, pp. 3545-3558, Journal of Materials Engineering and Performance, C1

Hydrogen permeation in twinning-induced plasticity (TWIP) steel

O Kazum, H Beladi, M Kannan

(2018), Vol. 43, pp. 22685-22693, International journal of hydrogen energy, Amsterdam, The Netherlands, C1

The Role of Thermomechanical Routes on the Distribution of Grain Boundary and Interface Plane Orientations in Transformed Microstructures

H Beladi, G Rohrer

(2017), Vol. 48, pp. 2781-2790, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Whistler, CANADA, C1

Atomistic simulations of grain boundary energies in tungsten

S Ratanaphan, T Boonkird, R Sarochawikasit, H Beladi, K Barmak, G Rohrer

(2017), Vol. 186, pp. 116-118, Materials Letters, C1

Static Softening in a Ni-30Fe Austenitic Model Alloy After Hot Deformation: Microstructure and Texture Evolution

H Beladi, P Cizek, A Taylor, G Rohrer, P Hodgson

(2017), Vol. 48, pp. 855-867, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

The five-parameter grain boundary curvature distribution in an austenitic and ferritic steel

X Zhong, D Rowenhorst, H Beladi, G Rohrer

(2017), Vol. 123, pp. 136-145, Acta materialia, Amsterdam, The Netherlands, C1

A novel high-strain-rate ferrite dynamic softening mechanism facilitated by the interphase in the austenite/ferrite microstructure

N Haghdadi, P Cizek, H Beladi, P Hodgson

(2017), Vol. 126, pp. 44-57, Acta materialia, Amsterdam, The Netherlands, C1

On the crystallographic characteristics of nanobainitic steel

H Beladi, V Tari, I Timokhina, P Cizek, G Rohrer, A Rollett, P Hodgson

(2017), Vol. 127, pp. 426-437, Acta materialia, Amsterdam, The Netherlands, C1

The austenite microstructure evolution in a duplex stainless steel subjected to hot deformation

N Haghdadi, P Cizek, H Beladi, P Hodgson

(2017), Vol. 97, pp. 1209-1237, Philosophical magazine, Abingdon, Eng., C1

Austenite-ferrite interface crystallography dependence of sigma phase precipitation using the five-parameter characterization approach

N Haghdadi, D Abou-Ras, P Cizek, P Hodgson, A Rollett, H Beladi

(2017), Vol. 196, pp. 264-268, Materials Letters, C1

Thermal stability of an ultrafine grained Ti-6Al-4V alloy during post-deformation annealing

Q Chao, P Hodgson, H Beladi

(2017), Vol. 694, pp. 13-23, Materials Science and Engineering A, C1

Analysis of tensile deformation behavior of AM2B® advanced high-strength steel using electron back-scattered diffraction technique

M Askari-Paykani, H Shahverdi, R Miresmaeili, H Beladi

(2017), Vol. 130, pp. 64-73, Materials Characterization, C1

The nitrocarburising response of low temperature bainite steel

D Fabijanic, I Timokhina, H Beladi, P Hodgson

(2017), Vol. 7, Metals, C1

Strain rate dependence of ferrite dynamic restoration mechanism in a duplex low-density steel

N Haghdadi, A Zarei-Hanzaki, E Farabi, P Cizek, H Beladi, P Hodgson

(2017), Vol. 132, pp. 360-366, Materials and Design, London, Eng, C1

Dynamic Restoration Processes in a 23Cr-6Ni-3Mo Duplex Stainless Steel: Effect of Austenite Morphology and Interface Characteristics

N Haghdadi, P Cizek, H Beladi, P Hodgson

(2017), Vol. 48, pp. 4803-4820, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

One-step quenching and partitioning treatment of a commercial low silicon boron steel

H Kong, Q Chao, M Cai, E Pavlina, B Rolfe, P Hodgson, H Beladi

(2017), Vol. 707, pp. 538-547, Materials Science and Engineering A, C1

Hot deformation and restoration mechanisms in duplex stainless steels: Effect of strain rate

N Haghdadi, P Cizek, H Beladi, P Hodgson

(2017), Vol. 109, pp. 5-16, Metallurgia Italiana, C1

Microstructure and Texture Evolution During Symmetric and Asymmetric Rolling of a Martensitic Ti-6Al-4V Alloy

Q Chao, P Hodgson, H Beladi

(2016), Vol. 47, pp. 531-545, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

Enhanced mechanical response of an ultrafine grained Ti-6A1-4V alloy produced through warm symmetric and asymmetric rolling

Q Chao, P Cizek, J Wang, P Hodgson, H Beladi

(2016), Vol. 650, pp. 404-413, Materials Science and Engineering A, C1

Comparisons of the two-body abrasive wear behaviour of four different ferrous microstructures with similar hardness levels

B Narayanaswamy, P Hodgson, H Beladi

(2016), Vol. 350-351, pp. 155-165, Wear, Amsterdam, The Netherlands, C1

Effect of particle characteristics on the two-body abrasive wear behaviour of a pearlitic steel

B Narayanaswamy, P Hodgson, H Beladi

(2016), Vol. 354-355, pp. 41-52, Wear, Amsterdam, The Netherlands, C1

The influence of fine ferrite formation on the γ/α interface, fine bainite and retained austenite in a thermomechanically-processed transformation induced plasticity steel

I Timokhina, M Miller, H Beladi, P Hodgson

(2016), Vol. 31, pp. 806-818, Journal of Materials Research, C1

Growth of bainitic ferrite and carbon partitioning during the early stages of bainite transformation in a 2 mass% silicon steel studied by in situ neutron diffraction, TEM and APT

I Timokhina, K Liss, D Raabe, K Rakha, H Beladi, X Xiong, P Hodgson

(2016), Vol. 49, pp. 399-414, Journal of Applied Crystallography, C1

Microstructure characteristics of the (111) oriented grains in a Fe-30Ni-Nb model austenitic steel deformed in hot uniaxial compression

D Poddar, P Cizek, H Beladi, P Hodgson

(2016), Vol. 118, pp. 382-396, Materials characterization, Amsterdam< The Netherlands, C1

On the work-hardening behaviour of a high manganese TWIP steel at different deformation temperatures

V Shterner, I Timokhina, H Beladi

(2016), Vol. 669, pp. 437-446, Materials Science and Engineering A, C1

The Impact of Retained Austenite Characteristics on the Two-Body Abrasive Wear Behavior of Ultrahigh Strength Bainitic Steels

B Narayanaswamy, P Hodgson, I Timokhina, H Beladi

(2016), Vol. 47, pp. 4883-4895, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

Hydrogen Permeation in Nanostructured Bainitic Steel

O Kazum, H Beladi, I Timokhina, Y He, M Bobby Kannan

(2016), Vol. 47, pp. 4896-4903, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

On the Ti-Mo-Fe-C atomic clustering during interphase precipitation in the Ti-Mo steel studied by advanced microscopic techniques

I Timokhina, M Miller, J Wang, H Beladi, P Cizek, P Hodgson

(2016), Vol. 111, pp. 222-229, Materials and design, Amsterdam, The Netherlands, C1

Thermo-mechanical processing of TRIP-aided steels

R Ranjan, H Beladi, S Singh, P Hodgson

(2015), Vol. 46, pp. 3232-3247, Metallurgical and materials transactions a: physical metallurgy and materials science, New York, N.Y., C1

The effect of deformation twinning on stress localization in a three dimensional TWIP steel microstructure

V Tari, A Rollett, H Kadiri, H Beladi, A Oppedal, R King

(2015), Vol. 23, Modelling and Simulation in Materials Science and Engineering, C1

Heat affected zone microstructures and their influence on toughness in two microalloyed HSLA steels

B Hutchinson, J Komenda, G Rohrer, H Beladi

(2015), Vol. 97, pp. 380-391, Acta materialia, Amsterdam, The Netherlands, C1

The evolution of microbands and their interaction with NbC precipitates during hot deformation of a Fe-30Ni-Nb model austenitic steel

D Poddar, P Cizek, H Beladi, P Hodgson

(2015), Vol. 99, pp. 347-362, Acta materialia, Amsterdam, The Netherlands, C1

Constitutive analysis of hot deformation behavior of a Ti6Al4V alloy using physical based model

P Souza, H Beladi, R Singh, B Rolfe, P Hodgson

(2015), Vol. 648, pp. 265-273, Materials science and engineering A, Amsterdam, The Netherlands, C1

Orientation dependence of the deformation microstructure in a Fe-30Ni-Nb model austenitic steel subjected to hot uniaxial compression

D Poddar, P Cizek, H Beladi, P Hodgson

(2015), Vol. 46, pp. 5933-5951, Metallurgical and materials transactions A, New York, N.Y., C1

Computational inverse analysis of static recrystallization kinetics

S Khoddam, P Hodgson, H Beladi

(2015), Vol. 103, pp. 97-103, International journal of mechanical sciences, Amsterdam, The Netherlands, C1

Aqueous corrosion performance of nanostructured bainitic steel

O Kazum, K Bobby, H Beladi, I Timokhina, P Hodgson, S Khoddam

(2014), Vol. 54, pp. 67-71, Materials and design, Amsterdam, The Netherlands, C1

On low temperature bainite transformation characteristics using in-situ neutron diffraction and atom probe tomography

K Rakha, H Beladi, I Timokhina, X Xiong, S Kabra, K Liss, P Hodgson

(2014), Vol. 589, pp. 303-309, Materials science & engineering A, Amsterdam, The Netherlands, C1

The distribution of intervariant crystallographic planes in a lath martensite using five macroscopic parameters

H Beladi, G Rohrer, A Rollett, V Tari, P Hodgson

(2014), Vol. 63, pp. 86-98, Acta materialia, Amsterdam, The Netherlands, C1

Ultrafine grain formation in a Ti-6Al-4V alloy by thermomechanical processing of a martensitic microstructure

Q Chao, P Hodgson, H Beladi

(2014), Vol. 45, pp. 2659-2671, Metallurgical and materials transactions a: physical metallurgy and materials science, New York, N.Y., C1

Deformation behaviour of a commercial pure titanium alloy during hot compression testing

Q Chao, H Beladi, I Sabirov, P Hodgson

(2014), Vol. 773-774, pp. 281-286, Materials Science Forum, Stafa-Zurich, Switzerland, C1

Surface wrinkling of the twinning induced plasticity steel during the tensile and torsion tests

S Khoddam, H Beladi, P Hodgson, A Zarei-Hanzaki

(2014), Vol. 60, pp. 146-152, Materials and Design, Amsterdam, The Netherlands, C1

Evolution of strain-induced precipitates in a model austenitic Fe-30Ni-Nb steel and their effect on the flow behaviour

D Poddar, P Cizek, H Beladi, P Hodgson

(2014), Vol. 80, pp. 1-15, Acta Materialia, Amsterdam, The Netherlands, C1

Microstructure evolution of martensitic Ti-6Al-4V alloy during warm deformation

Q Chao, P Hodgson, H Beladi

(2014), Vol. 783-786, pp. 679-684, Materials Science Forum, Stafa-Zurich, Switzerland, C1

Effect of temperature on mechanical behaviour of high manganese TWIP steel

V Shterner, I Timokhina, H Beladi, P Hodgson

(2014), Vol. 773-774, pp. 257-262, Materials science forum, Zurich, Switzerland, C1

A constitutive model of the deformation behaviour of twinning induced plasticity (TWIP) steel at different temperatures

V Shterner, A Molotnikov, I Timokhina, Y Estrin, H Beladi

(2014), Vol. 613, pp. 224-231, Materials Science and Engineering A, Amsterdam , Netherlands, C1

The five-parameter grain boundary character and energy distributions of a fully austenitic high-manganese steel using three dimensional data

H Beladi, N Nuhfer, G Rohrer

(2014), Vol. 70, pp. 281-289, Acta materialia, London, England, C1

The correlation between stacking fault energy and the work hardening behaviour of high-mn twinning induced plasticity steel tested at various temperatures

V Shterner, I Timokhina, H Beladi

(2014), Vol. 922, pp. 676-681, Advanced Materials Research, Stafa-Zurich, Switzerland, C1

Variant selection and intervariant crystallographic planes distribution in martensite in a Ti-6Al-4V alloy

H Beladi, Q Chao, G Rohrer

(2014), Vol. 80, pp. 478-489, Acta Materialia, C1

On the low temperature strain aging of bainite in the TRIP steel

I Timokhina, H Beladi, X Xiong, P Hodgson

(2013), Vol. 44, pp. 5177-5191, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Berlin, Germany, C1

Effect of substructure characteristics on the dislocation annihilation process during post-deformation annealing

H Beladi, P Cizek, A Taylor, P Hodgson

(2013), Vol. 753, pp. 76-79, Materials science forum, Stafa-Zurich, Switzerland, C1

Orientation dependence of the substructure characteristics in a Ni- 30%Fe austenitic alloy deformed in hot torsion

P Cizek, H Beladi, A Taylor, P Hodgson

(2013), Vol. 753, pp. 54-57, Materials science forum, Stafa-Zurich, Switzerland, C1

Back calculation of parent austenite orientation using a clustering approach

V Tari, A Rollett, H Beladi

(2013), Vol. 46, pp. 210-215, Journal of applied crystallography, London, England, C1

Multiscale microstructure engineering of steels

P Hodgson, I Timokhina, H Beladi

(2013), Vol. 29, pp. 1152-1157, Materials science and technology, Leeds, England, C1

Atomic scale investigation of solutes and precipitates in high strength steels

P Hodgson, S Mukherjee, H Beladi, X Xiong, I Timokhina

(2013), Vol. 762, pp. 14-21, Materials science forum, Stafa-Zurich, Switzerland, C1

The distribution of grain boundary planes in interstitial free steel

H Beladi, G Rohrer

(2013), Vol. 44, pp. 115-124, Metallurgical and materials transactions A, Berlin, Germany, C1

The relative grain boundary area and energy distributions in a ferritic steel determined from three-dimensional electron backscatter diffraction maps

H Beladi, G Rohrer

(2013), Vol. 61, pp. 1404-1412, Acta materialia, Amsterdam, The Netherlands, C1

A novel thermomechanical approach to produce a fine ferrite and low-temperature bainitic composite microstructure

H Beladi, I Timokhina, X Xiong, P Hodgson

(2013), Vol. 61, pp. 7240-7250, Acta materialia, Amsterdam, The Netherlands, C1

Selective dissolution of retained austenite in nanostructured bainitic steels

O Kazum, M Kannan, H Beladi, I Timokhina, P Hodgson, S Khoddam

(2013), Vol. 16, pp. 442-444, Advanced engineering materials, London, Eng., C1

The five-parameter grain boundary character distribution of nanocrystalline tungsten

X Liu, D Choi, H Beladi, N Nuhfer, G Rohrer, K Barmak

(2013), Vol. 69, pp. 413-416, Scripta materialia, Amsterdam, The Netherlands, C1

Microstructure evolution and softening processes occurring during annealing of hot deformed Ni-30Fe austenite

P Hodgson, P Cizek, H Beladi, A Taylor

(2012), Vol. 706-709, pp. 2134-2139, Materials science forum, Stafa-Zurich, Switzerland, C1

Role of microstructure in the low cycle fatigue of multi-phase steels

T Hilditch, H Beladi, P Hodgson, N Stanford

(2012), Vol. 534, pp. 288-296, Materials science and engineering : A, Lausanne, Switzerland, C1

Texture evolution and softening processes in an austenitic Ni-30Fe alloy subjected to hot deformation and subsequent annealing

P Hodgson, P Cizek, A Taylor, H Beladi

(2012), Vol. 702-703, pp. 435-438, Materials science forum, Stafa-Zurich, Switzerland, C1

The formation of ultrafine ferrite and low temperature bainite through thermomechanical processing

H Beladi, I Timokhina, P Hodgson

(2012), Vol. 706-709, pp. 2047-2052, Materials science forum, Stafa-Zurich, Switzerland, C1

Constitutive Modeling of the Tensile Behavior of Al-TWIP Steel

J Kim, Y Estrin, H Beladi, I Timokhina, K Chin, S Kim, B De Cooman

(2012), Vol. 43, pp. 479-490, Metallurgical and materials transactions A, New York, N. Y., C1

Effect of bake-hardening treatment on the mechanical properties of high strength bainitic steel produced by thermomechanical processing

I Timokhina, H Beladi, X Xiong, P Hodgson

(2012), Vol. 706-709, pp. 2332-2337, Materials science forum, Stafa-Zurich, Switzerland, C1

Substructure and texture characteristics of the deformed matrix and dynamically recrystallized grains in a Ni-30%Fe austenitic alloy

P Cizek, H Beladi, P Hodgson

(2012), Vol. 715-716, pp. 180-185, Materials science forum, Stafa-Zurich, Switzerland, C1

New insights into the dynamic and metadynamic recrystallization of austenite

P Hodgson, P Cizek, H Beladi

(2012), Vol. 715-716, pp. 259-266, Materials science forum, Stafa-Zurich, Switzerland, C1

Effects of dynamic loading on nano-scale depth-recovery and damping property of single crystal CuAlNi shape memory alloy

A Amini, H Beladi, N Hameed, F Will

(2012), Vol. 545, pp. 222-224, Journal of alloys and compounds, Amsterdam, The Netherlands, C1

Nanoscale microstructural characterization of a nanobainitic steel

I Timokhina, H Beladi, X Xiong, Y Adachi, P Hodgson

(2011), Vol. 59, pp. 5511-5522, Acta materialia, Oxford, U. K., C1

New insight into the mechanism of metadynamic softening in austenite

H Beladi, P Cizek, P Hodgson

(2011), Vol. 59, pp. 1482-1492, Acta materialia, Oxford, U. K., C1

Three-dimensional atomic scale analysis of microstructures formed in high strength steels

I Timokhina, X Xiong, H Beladi, S Mukherjee, P Hodgson

(2011), Vol. 27, pp. 739-741, Materials science and technology, Leeds, U. K., C1

Ultrafine ferrite formation through isothermal static phase transformation

H Beladi, I Timokhina, S Mukherjee, P Hodgson

(2011), Vol. 59, pp. 4186-4196, Acta materialia, Oxford, U. K., C1

Understanding the behavior of advanced high-strength steels using atom probe tomography

E Pereloma, H Beladi, L Zhang, I Timokhina

(2011), Vol. 43, pp. 3958-3971, Metallurgical and materials transactions a, New York, N. Y., C1

Orientation dependence of twinning and strain hardening behaviour of a high manganese twinning induced plasticity steel with polycrystalline structure

H Beladi, I Timokhina, Y Estrin, J Kim, B De Cooman, S Kim

(2011), Vol. 59, pp. 7787-7799, Acta materialia, Oxford, U. K., C1

Understanding of the bainite transformation in a nano-structured bainitic steel

P Hodgson, I Timokhina, X Xiong, Y Adach, H Beladi

(2011), Vol. 172-174, pp. 123-128, Solid state phenomena, Uetikon-Zurich, Switzerland, C1

Application of advanced experimental techniques for the microstructural characterization of nanobainitic steels

I Timokhina, H Beladi, X Xiong, Y Adachi, P Hodgson

(2011), Vol. 172-174, pp. 1249-1254, Solid state phenomena, Uetikon-Zurich, Switzerland, C1

Effect of thermomechanical processing on the microstructure and retained austenite stability during in situ tensile testing using synchrotron X-Ray diffraction of NbMoAl TRIP steel

E Pereloma, L Zhang, K Liss, U Garbe, J Almer, T Schambron, H Beladi, I Timokhina

(2011), Vol. 172-174, pp. 741-746, Solid state phenomena, Zürich, Switzerland, C1

Texture and substructure development during dynamic recrystallization in Ni-30Fe austenite

H Beladi, P Cizek, P Hodgson

(2010), Vol. 638-642, pp. 2835-2840, Materials science forum, Stafa-Zurich, Switzerland, C1

The mechanism of metadynamic softening in austenite after complete dynamic recrystallization

H Beladi, P Cizek, P Hodgson

(2010), Vol. 62, pp. 191-194, Scripta materialia, Kidlington, England, C1

Refinement of microstructure in steels through thermomechanical processing

H Beladi, I Timokhina, S Mukherjee, P Hodgson

(2010), Vol. 97-101, pp. 2163-2166, Advanced materials research, Stafa-Zurich, Switzerland, C1

Deformation and frictional heating in relation to wear in sheet metal stamping

M Pereira, P Okonkwo, W Yan, B Rolfe

(2010), Vol. 81, pp. 713-716, Steel research international, Weinheim, Germany, C1

Constitutive modeling of TWIP steel in uni-axial tension

J Kim, Y Estrin, H Beladi, S Kim, K Chin, B De Cooman

(2010), Vol. 654-656, pp. 270-273, Materials science forum, Stafa-Zurich, Switzerland, C1

Nano-scale analysis of nano-bainite formed in advanced high strength steels

I Timokhina, H Beladi, X Xiong, E Pereloma, P Hodgson

(2010), Vol. 654-656, pp. 102-105, Materials science forum, Stafa-Zurich, Switzerland, C1

On the characteristics of substructure development through dynamic recrystallization

H Beladi, P Cizek, P Hodgson

(2010), Vol. 58, pp. 3531-3541, Acta materialia, Amsterdam, The Netherlands, C1

Texture and substructure development during post-dynamic softening in Ni-30%Fe austenite

H Beladi, P Cizek, P Hodgson

(2010), Vol. 654-656, pp. 1279-1282, Materials science forum, Stafa-Zurich, Switzerland, C1

Nanostructural engineering of steel

P Hodgson, I Timokhina, H Beladi, I Sabirov, E Pereloma

(2010), Vol. 81, pp. 33-38, steel research international, London, Eng., C1-1

Crystallographic analysis of nanobainitic steels

H Beladi, Y Adachi, I Timokhina, P Hodgson

(2009), Vol. 60, pp. 455-458, Scripta materialia, Oxford, England, C1

Dynamic recrystallization of austenite in Ni-30 Pct Fe model alloy : microstructure and texture evolution

H Beladi, P Cizek, P Hodgson

(2009), Vol. 40, pp. 1175-1189, Metallurgical and materials transactions A : physical metallurgy and materials science, New York, N.Y., C1

Texture and substructure characteristics of dynamic recrystallization in a Ni-30%Fe austenitic model alloy

H Beladi, P Cizek, P Hodgson

(2009), Vol. 61, pp. 528-531, Scripta materialia, Kidlington, United Kingdom, C1

Microstructure and mechanical properties of thermomechanically processed TRIP steel

I Timokhina, P Hodgson, H Beladi, E Pereloma

(2009), Vol. 11-12, pp. 43-48, La Metallurgia Italiana, Milan, Italy, C1

A descriptive model for the formation of ultrafine grained steels

P Hodgson, A Shokouhi, H Beladi

(2008), Vol. 48, pp. 1046-1049, ISIJ international, Tokyo, Japan, C1

The formation of ultrafine ferrite through static transformation in low carbon steels

Y Adachi, M Wakita, H Beladi, P Hodgson

(2008), Vol. 22, pp. 2804-2813, International journal of modern physics B, Singapore, C1-1

Influence of aging pre-treatment on the compressive deformation of WE54 alloy

H Beladi, M Barnett

(2007), Vol. 452-453, pp. 306-312, Materials science and engineering A: structural materials; properties, microstructures and processing, Amsterdam, The Netherlands, C1

Effect of carbon content on the recrystallization kinetics of Nb-steels

H Beladi, P Hodgson

(2007), Vol. 56, pp. 1059-1062, Scripta materialia, Oxford, England, C1

The effect of multiple deformations on the formation of ultrafine grained steels

H Beladi, G Kelly, P Hodgson

(2007), Vol. 38, pp. 450-463, Metallurgical and materials transactions A - physical metallurgy and materials science, Warrendale, PA., C1

Ultrafine grained structure formation in steels using dynamic strain induced transformation processing

H Beladi, G Kelly, P Hodgson

(2007), Vol. 52, pp. 14-28, International materials reviews, London, England, C1

The formation of ultrafine ferrite through static transformation in low carbon steels

Y Adachi, M Wakita, H Beladi, P Hodgson

(2007), Vol. 55, pp. 4925-4934, Acta Materialia, Oxford, England, C1

The recrystallization behaviour of Nb microalloyed steels

H Beladi, P Hodgson

(2007), Vol. 561, pp. 25-28, Materials science forum, Aedermannsdorf, Switzerland, C1

Dynamic recrystallization in AZ31 magnesium alloy

S Fatemi-Varzaneh, A Zarei-Hanzaki, H Beladi

(2007), Vol. 456, pp. 52-57, Materials science and engineering: A, Amsterdam, The Netherlands, C1-1

Characterization on ferrite microstructure evolution during large strain warm torsion testing of plain low carbon steel

B Eghbali, A Abdollah-Zadeh, H Beladi, P Hodgson

(2006), Vol. 435-436, pp. 499-503, Materials science & engineering. A. Structural materials : properties, microstructure and processing, Lausanne, Switzerland, C1

Grain refinement in steels through thermomechanical processing

P Hodgson, H Beladi, M Barnett

(2005), Vol. 500, pp. 39-48, Materials science forum, Aedermannsdorf, Switzerland, C1

Mapping the hot deformation microstructure of Ni-30Fe alloy

H Beladi, P Hodgson, M Barnett

(2005), Vol. 45, pp. 1893-1896, ISIJ international, Tokyo, Japan, C1

Development of ultrafine grained steels through thermomechanical processing

P Hodgson, H Beladi, G Kelly

(2005), Vol. 44, pp. 179-185, Canadian metallurgical quarterly, Montreal, Canada, C1

The influence of solute carbon in cold-rolled steels on shear band formation and recrystallization texture

M Nave, M Barnett, H Beladi

(2004), Vol. 44, pp. 1072-1078, ISIJ international, Tokyo, Japan, C1

Microstructural evolution of ultrafine grained structure in plain carbon steels through single pass rolling

H Beladi, G Kelly, P Hodgson

(2004), Vol. 20, pp. 1538-1544, Materials science and technology, Leeds, England, C1

The evolution of ultrafine ferrite formation through dynamic strain-induced transformation

H Beladi, G Kelly, A Shokouhi, P Hodgson

(2004), Vol. 371, pp. 343-352, Materials science & engineering. A., Structural materials : properties, microstructure and processing, Lausanne, Switzerland, C1

Formation of ultrafine grained structure in plain carbon steels through thermomechanical processing

H Beladi, G Kelly, P Hodgson

(2004), Vol. 45, pp. 2214-2218, Materials transactions, Sendai, Japan, C1

Recrystallization in 304 austenitic stainless steel

A Dehghan-Manshadi, H Beladi, M Barnett, P Hodgson

(2004), Vol. 467, pp. 1163-1168, Materials science forum, Aedermannsdorf, Switzerland, C1

Formation of ultrafine grained microstructures in steel through strain induced transformation during single pass hot rolling

H Beladi, A Zarei-Hanzaki, G Kelly, P Hodgson

(2004), Vol. 20, pp. 213-220, Materials science and technology, London, England, C1

Effect of thermomechanical parameters on the critical strain for ultrafine ferrite formation through hot torsion testing

H Beladi, G Kelly, A Shokouhi, P Hodgson

(2004), Vol. 367, pp. 152-161, Materials science & engineering. A., Structural materials : properties, microstructure and processing, Lausanne, Switzerland, C1

The role of recrystallization and coarsening in the formation of ultrafine grained steels through thermomechanical processing.

P Hodgson, H Beladi

(2004), Vol. 467, pp. 1137-1144, Materials science forum, Aedermannsdorf, Switzerland, C1

The formation of ultrafine grained steel microstructures through thermomechanical processing.

P Hodgson, H Beladi

(2004), Vol. 2, pp. 45-51, Steel grips, Germany, C1

A study on ultrafine ferrite formation during post deformation cooling

A Shokouhi, H Beladi, P Hodgson

(2003), Vol. 426, pp. 1295-1300, Materials science forum, Aedermannsdorf, Switzerland, C1

Ultrafine grained ferrite formed by interrupted hot torsion deformation of plain carbon steel

G Kelly, H Beladi, P Hodgson

(2002), Vol. 42, pp. 1585-1590, ISIJ international, Tokyo, Japan, C1