Prof Jeong Yoon

STAFF PROFILE

Position

Professor, Applied Mechanics

Faculty

Faculty of Sci Eng & Built Env

Department

School of Engineering

Campus

Geelong Waurn Ponds Campus

Qualifications

Doctor of Philosophy, Korea Adv. Inst. of S&T, 1997

Contact

j.yoon@deakin.edu.au
+61 3 522 73425

Biography summary

Prof. Jeong Whan Yoon is currently Professor of Applied Mechanics (Head of Advanced Manufacturing) at Deakin University, Australia. He is leading the International Consortium for Innovative Manufacturing (ICIM) with General Motors toward high reliability design and manufacturing for lightweight materials and structures. Before he joined Deakin, he led AusAMRC (Australian Advanced Manufacturing Research Centre with Boeing) at Swinburne University as Research Director from 2010 to 2013. AusAMRC, which opened in November 2009, is part of 12 global networks of collaborating Boeing-engaged research centers around the world. His research focus is mainly on mechanics of the lightweight materials including aluminum, Mg & Ti, and composite. He has published over 200 technical papers for international journals and conferences (Scopus : over 4,000 Citations; H-index of 34). He received “2008 International Journal of Plasticity Award” for outstanding contributions in the field of plasticity. He has been serving as an “Editorial-Board” member for International Journal of Plasticity since 2008. He is currently an "Associate Editor" for International Journal of Plasticity. As guest editors, he edited seven special issues at Int. J. Plasticity and two issue at Int. J. Solids & Structures. He also has diverse industry experiences including LG Electronics (Korea) for product development, MSC Software Corporation (USA) for MSC. Nastran & Marc source code development and Alcoa Technical Center (USA) for leading the development of constitutive models for various aluminum applications. He served as the chairman of NUMISHEET2014 conference which is the most important conference in the field of sheet metal forming modeling and simulation. He received his PhD at KAIST in 1997.

Research interests

* Metal and Composite Forming & Formability
* Constitutive Modeling
* Fatigue Crack Growth & Fracture
* High Speed Fracture (Ballistic and Blast)
* Materials Characterization Methods
* Structural Analysis for Instability
* Multiscale Modeling
* Machining
* Process & Product Developments
* Design and Manufacturing

Affiliations

July 2013  –     present    Chair Professor of Applied Mechanics, Deakin University, Australia

Apr. 2010  – June 2013    Professor of Advanced Manufacturing, Swinburne University of Technology, Australia

Nov 2003  –  Mar 2010      Sr. Staff Scientist, Development and Implementation of Advanced Material Models, Alcoa, Alcoa Technical Center, PA, USA

Feb 2001 –   Oct 2003       Lead Developer, Solver Development for General Purpose Nonlinear Commercial Software, Marc Development Group, MSC Software Corporation, CA, USA

April 1998 –  Feb 2001     Senior Research Engineer, New Products Development, LG Production Engineering Research Center, LG Electronics, Korea

(Adjunct Appointment)

Jan 2002  – present     High Merit Scientist & Invited Professor, Department of Mechanical Engineering, Univ. of Aveiro, Portugal

July 2013  -  present      Adjunct Professor, Swinburne University of Technology, Australia

Units taught

* HES 6128: Advanced Metal Forming, Swinburne University of Technology (2011, 2012, 2013)

* HES 6219 : Nonlinear Finite Element Method for Structures and Materials, SUT (2012)

* ME 8012: Fracture Mechanics, Dept. of Mechanical Eng., Univ. of Aveiro, Portugal (2007)

Professional activities

Service in International Advisory (or Editorial Boards) :

• Associate Editor for International Journal of Plasticity (2018- present)

• Editorial Board for International Journal of Plasticity (2008- present)

• Editorial Board for Computer Methods in Materials Science (2013- present)

• Scientific Board for ESAFORM (European Society of Forming) (2006- 2010)

Synergistic Activities:

• Chairman, NUMISHEET 2014 International Conference (Melbourne, Australia)

• Associate Chair, PLASTICITY 2013 (Nassau, Bahamas)

• Co-Chairman, NUMISHEET 2005 International Conference (Detroit, USA)-in Co-editor of the Conference Proceedings

• International Organizing Committee, Plasticity Symposium (03, 05, 06, 07, 08, 09,10,11,12,13,15,16,17,18);

• NUMISHEET Steering Committee : 2016 (Bristol, UK), 2018 (Tokyo, Japan)

• International Scientific Committee, NUMIFORM 2007 (Porto, Portugal), 2010 (Pohang, Korea), 2013 (Senyang, China) / ICTP 2008 (Kyungju, Korea), 2011 (Ahen, Germany), 2014 (Nagoya, Japan), 2017 (Cambridge, UK) / NUMISHEET 2008 (Interlaken, Swiss), 2011 (Seoul, Korea)

Lecture

• 2016, Plenary Lecture at AEPA 2016 (Hiroshima, Japan)

• 2016, Plenary Lecture at NUMISHEET 2016 (Bristol, United Kingdom)

• 2013, Plenary Lecture at ESAFROM 2013 (Aveiro, Portugal)

• 2018, 2016, 2015, 2013, 2012, 2011, 2010, 2009, 2008, 2007, Keynote Lectures at PLASTICITY Conferences

• 2008, Keynote Lectures at NUMISHEET2008 & ICTP 2008 Conferences (Switzerland, Korea)

• 2003, Plenary Lecture for MSC Software User's Conference (Jeju, Korea)

Awards

• 2008, International Journal of Plasticity Medal : Given to an individual for a significant contribution over the last five years to the field of plasticity

• 2006, The Sigma Xi Best Paper Award (Alcoa Chapter)

• 2002, Outstanding Researcher Award from MSC Software Corporation (USA)

Publications

Filter by

2020

A new approach for fracture prediction considering general anisotropy of metal sheets

N Park, T Stoughton, J Yoon

(2020), Vol. 124, pp. 199-225, International journal of plasticity, Amsterdam, The Netherlands, C1

journal article

A multiplicative plastic hardening model in consideration of strain softening and strain rate: theoretical derivation and characterization of model parameters with simple tension and creep test

H Kim, J Yoon, K Chung, M Lee

(2020), Vol. 187, pp. 1-20, International journal of mechanical sciences, Amsterdam, The Netherlands, C1

journal article
2019

Stress integration-based on finite difference method and its application for anisotropic plasticity and distortional hardening under associated and non-associated flow rules

H Choi, J Yoon

(2019), Vol. 345, pp. 123-160, Computer methods in applied mechanics and engineering, Amsterdam, The Netherlands, C1

journal article

Evolution of residual stress distortion of a machined product for AA7085

H Choi, J Yoon, Y Kwon, D Seong

(2019), Vol. 13, pp. 123-131, Production engineering, Amsterdam, The Netherlands, C1

journal article

Alternative approach to model ductile fracture by incorporating anisotropic yield function

Y Lou, J Yoon

(2019), Vol. 164, pp. 12-24, International journal of solids and structures, Amsterdam, The Netherlands, C1

journal article

A reduced Yld2004 function for modeling of anisotropic plastic deformation of metals under triaxial loading

Y Lou, S Zhang, J Yoon

(2019), Vol. 161-162, pp. 1-20, International journal of mechanical sciences, Amsterdam, The Netherlands, C1

journal article

Combined anisotropic and distortion hardening to describe directional response with Bauschinger effect

E Lee, H Choi, T Stoughton, J Yoon

(2019), Vol. 122, pp. 73-88, International journal of plasticity, Amsterdam, The Netherlands, C1

journal article

A criterion for general description of anisotropic hardening considering strength differential effect with non-associated flow rule

N Park, T Stoughton, J Yoon

(2019), Vol. 121, pp. 76-100, International journal of plasticity, Amsterdam, The Netherlands, C1

journal article

Enhanced Constitutive Model for Aeronautic Aluminium Alloy (AA2024-T351) under High Strain Rates and Elevated Temperatures

P Paresi, Y Lou, A Narayanan, J Yoon

(2019), Vol. 20, pp. 79-87, International Journal of Automotive Technology, Berlin, Germany, C1

journal article

Dynamic axial compression of square CFRP/aluminium tubes

R Hussein, D Ruan, G Lu, J Yoon, Z Gao

(2019), Vol. 794, pp. 202-207, Key Engineering Materials : 14th Asia-Pacific Symposium on Engineering Plasticity and its Applications, Jeju Island, Korea, E1

conference

Assessment of newly developed ductile fracture criteria for lightweight metals

R Chai, Y Lou, J Yoon

(2019), Vol. 794, pp. 42-47, Key Engineering Materials : 14th Asia-Pacific Symposium on Engineering Plasticity and its Applications, Jeju Island, Korea, E1

conference

A springback prediction of 1.5 GPa grade steel in roll forming process for automotive sill-side inner component

H Choi, J Yoon, J Lee, G Kim

(2019), Vol. 794, pp. 267-274, Key Engineering Materials : 14th Asia-Pacific Symposium on Engineering Plasticity and its Applications, Jeju Island, Korea, E1

conference

A stress-based model for shear ductile fracture

Y Lou, J Yoon

(2019), Vol. 794, pp. 3-8, Key Engineering Materials : 14th Asia-Pacific Symposium on Engineering Plasticity and its Applications, Jeju Island, Korea, E1

conference

Finite element modeling and durability evaluation for rubber pad forming process

J Park, Y Kim, J Yoon, H So, J Lee, S Ko

(2019), Vol. 651, pp. 1-9, IDDRG 2019 : Proceedings of the International Deep Drawing Research Group 38th International Annual Conference, Enschede, The Netherlands, E1

conference

A new approach for advanced plasticity and fracture modelling

N Park, T Stoughton, J Yoon

(2019), Vol. 651, pp. 1-9, IDDRG 2019 : Proceedings of the International Deep Drawing Research Group 38th International Annual Conference, Enschede, The Netherlands, E1

conference
2018

On the efficiency and accuracy of stress integration algorithms for constitutive models based on non-associated flow rule

H Hippke, N Manopulo, J Yoon, P Hora

(2018), Vol. 11, pp. 239-246, International journal of material forming, Paris, France, C1

journal article

Anisotropic yield function based on stress invariants for BCC and FCC metals and its extension to ductile fracture criterion

Y Lou, J Yoon

(2018), Vol. 101, pp. 125-155, International journal of plasticity, Amsterdam, The Netherlands, C1

journal article

Anisotropic fracture forming limit diagram considering non-directionality of the equi-biaxial fracture strain

Namsu Park, H Huh, J Yoon

(2018), Vol. 151, pp. 181-194, International journal of solids and structures, Amsterdam, The Netherlands, C1

journal article

Correlation of the maximum shear stress with micro-mechanisms of ductile fracture for metals with high strength-to-weight ratio

Y Lou, J Yoon, H Huh, Q Chao, J Song

(2018), Vol. 146-147, pp. 583-601, International journal of mechanical sciences, Amsterdam, The Netherlands, C1

journal article

Plastic anisotropy and failure in thin metal: material characterization and fracture prediction with an advanced constitutive model and polar EPS (effective plastic strain) fracture diagram for AA 3014-H19

R Dick, J Yoon

(2018), Vol. 151, pp. 195-213, International journal of solids and structures, Amsterdam, The Netherlands, C1

journal article

Kinematic hardening model considering directional hardening response

E Lee, T Stoughton, J Yoon

(2018), Vol. 110, pp. 145-165, International journal of plasticity, Amsterdam, The Netherlands, C1

journal article

Rupture model based on non-associated plasticity

A Pradeau, J Yoon, S Thuillier, Y Lou, S Zhang

(2018), Vol. 1960, pp. 1-6, ESAFORM 2018 : Proceedings of the 21st International Conference on Material Forming, Palermo, Italy, E1

conference

Earing prediction of AA 2008-T4 with anisotropic Drucker yield function based on the second and third stress invariants

S Zhang, Y Lou, J Yoon

(2018), Vol. 1063, pp. 1-6, NUMISHEET 2018: 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Tokyo, Japan, E1

conference

Material characterization and fracture prediction with advanced constitutive model and Polar EPS fracture diagram for AA 3104-H19

R Dick, Y Lou, S Zhang, J Yoon

(2018), Vol. 1063, pp. 1-6, NUMISHEET 2018 : Proceedings of the 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Tokyo, Japan, E1

conference

Extension of the DF2016 isotropic model into an anisotropic ductile fracture criterion

Y Lou, J Yoon

(2018), Vol. 1063, pp. 1-6, NUMISHEET 2018 : Proceedings of the 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Tokyo, Japan, E1

conference

Constitutive modeling and FE implementation for anisotropic hardening under proportional loading conditions

E Lee, T Stoughton, J Yoon

(2018), Vol. 1063, pp. 1-6, NUMISHEET 2018 : Proceedings of the 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Tokyo, Japan, E1

conference

Stress update algorithm based on finite difference method and its application to homogenous anisotropic hardening (HAH) model

H Choi, J Yoon, F Barlat

(2018), Vol. 1063, pp. 1-6, NUMISHEET 2018 : Proceedings of the 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Tokyo, Japan, E1

conference

Scratch modeling of paint coated sheet metal for multi-stage deep drawing process

J Kim, J Yoon, B Lee, J Kim, J Park

(2018), Vol. 418, pp. 1-8, IDDRG 2018 : Proceedings of the 2018 International Deep Drawing Research Group Annual Conference, Waterloo, Ontario, E1

conference

FE implementation of HAH model using FDM-based stress update algorithm for springback prediction of AHSS sheets

S Yoon, H Choi, J Yoon, F Barlat

(2018), Vol. 1063, pp. 1-6, NUMISHEET 2018: 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Tokyo, Japan, E1-1

conference
2017

A manufacturing process using the infrared ray local heating method for seat cross members

E Lee, D Yang, J Yoon, W Yang

(2017), Vol. 89, pp. 3299-3305, International journal of advanced manufacturing technology, Berlin, Germany, C1

journal article

Crushing response of square aluminium tubes filled with polyurethane foam and aluminium honeycomb

R Hussein, D Ruan, G Lu, S Guillow, J Yoon

(2017), Vol. 110, pp. 140-154, Thin-walled structures, Amsterdam, The Netherlands, C1

journal article

Bending behavior to fracture of an aluminium alloy involving pre-strain

A Pradeau, S Thuillier, J Yoon

(2017), Vol. 725, pp. 495-501, Key engineering materials, Higashi-Hiroshima City, Japan, C1

journal article

Modeling of ductile fracture from shear to balanced biaxial tension for sheet metals

Y Lou, L Chen, T Clausmeyer, A Tekkaya, J Yoon

(2017), Vol. 112, pp. 169-184, International journal of solids and structures, Amsterdam, The Netherlands, C1

journal article

Anisotropic ductile fracture criterion based on linear transformation

Y Lou, J Yoon

(2017), Vol. 93, pp. 3-25, International journal of plasticity, Amsterdam, The Netherlands, C1

journal article

A new strategy to describe nonlinear elastic and asymmetric plastic behaviors with one yield surface

E-H Lee, T Stoughton, J Yoon

(2017), Vol. 98, pp. 217-238, International journal of plasticity, Kidlington, Eng., C1

journal article

A yield criterion through coupling of quadratic and non-quadratic functions for anisotropic hardening with non-associated flow rule

E-H Lee, T Stoughton, J Yoon

(2017), Vol. 99, pp. 120-143, International journal of plasticity, Kidlington, Eng., C1

journal article

Study on springback from thermal-mechanical boundary condition imposed to V-bending and L-bending processes coupled with infrared rays local heating

E Lee, J Yoon, D Yang

(2017), pp. 1-17, International Journal of Material Forming, Paris, France, C1

journal article

Orthotropic ductile fracture criterion based on linear transformation

J Yoon, S Zhang, T Stoughton

(2017), Vol. 896, pp. 1-8, IDDRG 2017 : Materials modelling and testing for sheet metal forming : Proceedings of the 36th IDDRG Conference 2017, Munich, Germany, E1

conference

Prediction of fracture initiation in square cup drawing of DP980 using an anisotropic ductile fracture criterion

N Park, H Huh, J Yoon

(2017), Vol. 896, pp. 1-8, IDDRG 2017: Materials Modelling and Testing for Sheet Metal Forming : Proceedings of the International Deep Drawing Research Group, Munich, Germany, E1

conference

Shape optimization of shear fracture specimen considering plastic anisotropy

S Zhang, J Yoon, S Lee, Y Lou

(2017), Vol. 1896, pp. 070005-1-070005-6, ESAFORM2017 : Proceedings of the 20th Internaional ESAFORM Conference on Material Forming, Dublin, Ireland, E1

conference

Finite Element formulation of a general asymmetrical yield function for pressure sensitive metals

S Zhang, Y Lou, J Yoon

(2017), Vol. 207, pp. 215-220, ICTP 2017 : Proceedings of the International Conference on the Technology of Plasticity 2017, Cambridge, Eng., E1

conference

Linear transformation based orthotropic shear ductile fracture criterion for lightweight metals

Y Lou, J Yoon

(2017), Vol. 1896, pp. 020025-1-020025-6, ESAFORM2017 : Proceedings of the 20th International ESAFORM Conference on Material Forming 2017, Dublin, Ireland, E1

conference

J2-J3 based anisotropic yield function under spatial loading

Y Lou, J Yoon

(2017), Vol. 207, pp. 233-238, ICTP 2017 : Proceedings of the International Conference on the Technology of Plasticity 2017, Cambridge, Eng., E1

conference
2016

Stress based prediction of formability and failure in incremental sheet forming

M Haque, J Yoon

(2016), Vol. 9, pp. 413-421, International journal of material forming, Berlin, Germany, C1

journal article

Prediction of failure in bending of an aluminium sheet alloy

A Pradeau, S Thuillier, J Yoon

(2016), Vol. 119, pp. 23-35, International journal of mechanical sciences, Amsterdam, The Netherlands, C1

journal article

Path-independent forming limit models for multi-stage forming processes

R Dick, J Yoon, T Stoughton

(2016), Vol. 9, pp. 327-337, International journal of material forming, Berlin, Germany, C1

journal article

Benchmark 3 - springback of an Al-Mg alloy in warm forming conditions

P Manach, J Cor, A Laurent, J Yoon

(2016), Vol. 734 : Part A - benchmarks, pp. 1-25, Journal of physics: conference series, Bristol, Eng., C1

journal article

Prediction of the bending behavior after pre-strain of an aluminum alloy

A Pradeau, S Thuillier, J Yoon

(2016), Vol. 1769, pp. 1-5, ESAFORM 2016 : Proceedings of the 19th International Conference on Material Forming, Nantes, France, E1

conference
2015

Strain rate effect of high purity aluminum single crystals: experiments and simulations

A Khan, J Liu, J Yoon, R Nambori

(2015), Vol. 67, pp. 39-52, International journal of plasticity, Amsterdam, The Netherlands, C1

journal article

An experimental study of square aluminium tubes with honeycomb core subjected to quasi-static compressive loads

R Hussein, D Ruan, J Yoon

(2015), Vol. 626, pp. 91-96, Key engineering materials, Pfaffikon, Switzerland, C1

journal article

A non-associated plasticity model with anisotropic and nonlinear kinematic hardening for simulation of sheet metal forming

A Taherizadeh, D Green, J Yoon

(2015), Vol. 69-70, pp. 370-382, International journal of solids and structures, Amsterdam, The Netherlands, C1

journal article

Anisotropic behavior in plasticity and ductile fracture of an aluminum alloy

Y Lou, J Yoon

(2015), Vol. 651-653, pp. 163-168, Key engineering materials, Zurich, Switzerland, C1

journal article

Modeling the effect of asymmetric rolling on mechanical properties of Al-Mg alloys

J De Almeida Grcio, G Vincze, J Yoon, R Cardoso, E Rauch, F Barlat

(2015), Vol. 86, pp. 922-931, Steel research international, London, Eng., C1

journal article

Necking behavior of AA 6022-T4 based on the crystal plasticity and damage models

J Kim, J Yoon

(2015), Vol. 73, pp. 3-23, International journal of plasticity, Amsterdam, The Netherlands, C1-1

journal article

Study on yield function and plastic potential under non-associated flow for accurate earing prediction in cup drawing

M Paulino, J Yoon

(2015), Vol. 86, pp. 852-860, Steel research international, London, Eng., C1

journal article

Wrinkling during cup drawing with NUMISHEET2014 benchmark test

R Dick, J Yoon

(2015), Vol. 86, pp. 915-921, Steel research international, London, Eng., C1

journal article

Numerical modeling and analysis for forming process of dual-phase 980 steel exposed to infrared local heating

E-H Lee, D-Y Yang, J Yoon, W-H Yang

(2015), Vol. 75-76, pp. 211-224, International journal of solids and structures, Amsterdam, The Netherlands, C1

journal article
2014

Stress-based forming limit curves

T Stoughton, J Yoon

(2014), Vol. 1, pp. 71-84, Comprehensive Materials Processing, Amsterdam, The Netherlands, B1

book chapter

Modeling of shear ductile fracture considering a changeable cut-off value for stress triaxiality

Y Lou, J Yoon, H Huh

(2014), Vol. 54, pp. 56-80, International Journal of Plasticity, C1

journal article

Asymmetric yield function based on the stress invariants for pressure sensitive metals

J Yoon, Y Lou, J Yoon, M Glazoff

(2014), Vol. 56, pp. 184-202, International Journal of Plasticity, C1

journal article

Study on the definition of equivalent plastic strain under non-associated flow rule for finite element formulation

M Safaei, J Yoon, W De Waele

(2014), Vol. 58, pp. 219-238, International Journal of Plasticity, C1

journal article

Suppression of necking in incremental sheet forming

D Seong, M Haque, J Kim, T Stoughton, J Yoon

(2014), Vol. 51, pp. 2840-2849, International journal of solids and structures, London, England, C1

journal article

Kinematics of Portevin-Le Chatelier bands in simple shear

P Manach, S Thuillier, J Yoon, J Cor, H Laurent

(2014), Vol. 58, pp. 66-83, International Journal of Plasticity, Amsterdam, The Netherlands, C1-1

journal article

Anisotropic hardening model based on non-associated flow rule and combined nonlinear kinematic hardening for sheet materials

A Taherizadeh, D Green, J Yoon

(2014), Vol. 1567, pp. 496-499, NUMISHEET 2014 : Proceedings of the 9th International Conference and Workshop on Numerical Simulation 3D Sheet Metal Forming Processes, Melbourne, Victoria, E1

conference

Modified Mohr-Coulomb fracture model for anisotropic sheet materials under limited triaxial stress conditions

T Stoughton, J Yoon

(2014), Vol. 1567, pp. 562-566, NUMISHEET 2014 : Proceedings of the 9th International Conference and Workshop on Numerical Simulation 3D Sheet Metal Forming Processes, Melbourne, Victoria, E1

conference

Prediction of FLD of sheet metals based on crystal plasticity model

J-B Kim, S-H Hong, J Yoon

(2014), Vol. 1567, pp. 374-377, NUMISHEET 2014 : Proceedings of the 9th International Conference and Workshop on Numerical Simulation 3D Sheet Metal Forming Processes, Melbourne, Victoria, E1

conference

Stress-based predictions of formability and failure in incremental sheet forming

M Haque, J Yoon

(2014), Vol. 1567, pp. 816-819, NUMISHEET 2014 : Proceedings of the 9th International Conference and Workshop on Numerical Simulation 3D Sheet Metal Forming Processes, Melbourne, Vic., E1

conference

Variation of yield loci in finite element analysis by considering texture evolution for AA5042 aluminum sheets

J Yoon, K Kim, J Yoon

(2014), Vol. 1567, pp. 524-527, NUMISHEET 2014 : Proceedings of the 9th International Conference and Workshop on Numerical Simulation 3D Sheet Metal Forming Processes, Melbourne, Victoria, E1

conference

Benchmark 3 : incremental sheet forming

M Elford, P Saha, D Seong, J Yoon

(2014), Vol. 1567, pp. 227-261, NUMISHEET 2014 : Proceedings of the 9th International Conference and Workshop on Numerical Simulation 3D Sheet Metal Forming Processes, Melbourne, Victoria, E1

conference

Benchmark 4 : wrinkling during cup drawing

R Dick, R Cardoso, M Paulino, J Yoon

(2014), Vol. 1567, pp. 262-327, NUMISHEET 2014 : Proceedings of the 9th International Conference and Workshop on Numerical Simulation 3D Sheet Metal Forming Processes, Melbourne, Victoria, E1

conference

Material characterizations for benchmark 1 and benchmark 2

T Stoughton, M Shi, G Huang, J Yoon

(2014), Vol. 1567, pp. 9-14, NUMISHEET 2014 : Proceedings of the 9th International Conference and Workshop on Numerical Simulation 3D Sheet Metal Forming Processes, Melbourne, Victoria, E1

conference
2013

Analysis of the necking behaviors with the crystal plasticity model using 3-dimensional shaped grains

J Kim, J Yoon

(2013), Vol. 684, pp. 357-361, Advanced Materials Research, B1-1

book chapter

On the elasto-plastic buckling of Integrally Stiffened Panels (ISP) joined by Friction Stir Welding (FSW): Numerical simulation and optimization algorithms

J Caseiro, R Valente, A Andrade-Campos, J Yoon

(2013), Vol. 76, pp. 49-59, International Journal of Mechanical Sciences, C1-1

journal article

Bifurcation instability of sheet metal during spring-back

J Kim, D Yang, J Yoon

(2013), Vol. 93, pp. 1914-1935, Philosophical magazine, Abingdon, Eng., C1-1

journal article

Failure prediction in the hole-flanging process of aluminium alloys

A Kacem, A Krichen, P Manach, S Thuillier, J Yoon

(2013), Vol. 99, pp. 251-265, Engineering Fracture Mechanics, C1-1

journal article

Consideration of strength differential effect in sheet metals with symmetric yield functions

Y Lou, H Huh, J Yoon

(2013), Vol. 66, pp. 214-223, International Journal of Mechanical Sciences, C1-1

journal article

Subspace analysis to alleviate the volumetric locking in the 3D solid-shell EFG method

A Graa, R Cardoso, J Yoon

(2013), Vol. 246, pp. 185-194, Journal of Computational and Applied Mathematics, C1-1

journal article

A comparison of EFGM and FEM for nonlinear solid mechanics problems

R Kumar, I Singh, B Mishra, R Cardoso, J Yoon

(2013), Vol. 535-536, pp. 434-437, Key Engineering Materials, Pfaffikon, Switzerland, C1-1

journal article
2012

Path independent forming limits in strain and stress spaces

T Stoughton, J Yoon

(2012), Vol. 49, pp. 3616-3625, International Journal of Solids and Structures, C1-1

journal article

Simulation of earing behaviors in bake hardening steel exhibiting a strong off-?-fiber component

E Kim, S Choi, E Shin, J Yoon

(2012), Vol. 49, pp. 3573-3581, International Journal of Solids and Structures, C1-1

journal article

Biaxial deformation behaviour of AZ31 magnesium alloy: crystal-plasticity- based prediction and experimental validation

D Steglich, Y Jeong, M Andar, T Kuwabara

(2012), Vol. 49, pp. 3551-3561, International journal of solids and structures, Amsterdam, The Netherlands, C1-1

journal article

Prediction of necking and fracture based on the crystal plasticity

J Kim, W Seo, S Hong, J Yoon

(2012), pp. 1187-1190, Metal Forming 2012 : Proceedings of the 14th International Conference on Metal Forming, Krakw, Poland, E1-1

conference
2011

Evaluation of advanced anisotropic models with mixed hardening for general associated and non-associated flow metal plasticity

A Taherizadeh, D Green, J Yoon

(2011), Vol. 27, pp. 1781-1802, International Journal of Plasticity, C1-1

journal article

Gripless nanotension test for determination of nano-scale properties

D Yang, T Lim, Y Son, F Barlat, J Yoon

(2011), Vol. 27, pp. 1527-1536, International Journal of Plasticity, C1-1

journal article

A new analytical theory for earing generated from anisotropic plasticity

J Yoon, R Dick, F Barlat

(2011), Vol. 27, pp. 1165-1184, International Journal of Plasticity, C1-1

journal article

Elasto-plastic buckling of integrally stiffened panels (ISP): An optimization approach for the design of cross-section profiles

J Caseiro, R Valente, A Andrade-Campos, J Yoon

(2011), Vol. 49, pp. 864-873, Thin-Walled Structures, C1-1

journal article

Strain-rate potential based elastic/plastic anisotropic model for metals displaying tension-compression asymmetry

J Yoon, O Cazacu, J Yoon

(2011), Vol. 200, pp. 1993-2004, Computer Methods in Applied Mechanics and Engineering, C1-1

journal article

A new approach for failure criterion for sheet metals

T Stoughton, J Yoon

(2011), Vol. 27, pp. 440-459, International Journal of Plasticity, C1-1

journal article

Effect of anisotropic yield functions on the accuracy of hole expansion simulations

T Kuwabara, K Hashimoto, E Iizuka, J Yoon

(2011), Vol. 211, pp. 475-481, Journal of Materials Processing Technology, C1-1

journal article

Genetic alterations of the CHOP gene in gastric cancers

Jae Song, Jong Park, Jeong Yoon, Suk Nam, Jung Lee, Won Park

(2011), Vol. 7, pp. 1-6, MOLECULAR & CELLULAR TOXICOLOGY, C1

journal article

A comparison between the Total Lagrangian Scheme (TLS) and the Predominat Twin Reorientation (PTR) methods to analyze the twinning deformations in a rate dependent crystal plasticity model

K Kitayama, R Cardoso, J Yoon, T Uemor, F Yoshida

(2011), pp. 1491-1497, Computational Plasticity XI - Fundamentals and Applications, COMPLAS XI, E1-1

conference
2010

A novel approach for anisotropic hardening modeling. Part II: Anisotropic hardening in proportional and non-proportional loadings, application to initially isotropic material

G Rousselier, F Barlat, J Yoon

(2010), Vol. 26, pp. 1029-1049, International Journal of Plasticity, C1-1

journal article

Orthotropic strain rate potential for the description of anisotropy in tension and compression of metals

O Cazacu, I Ionescu, J Yoon

(2010), Vol. 26, pp. 887-904, International Journal of Plasticity, C1-1

journal article

New anisotropic strain-rate potential for hexagonal metals

O Cazacu, J Yoon, J Yoon

(2010), Vol. 3, pp. 227-230, International Journal of Material Forming, C1-1

journal article

A polycrystal model to evaluate mechanical properties of asymmetrically rolled al sheets

R Alves de Sousa, F Simes, J Grcio, J Yoon

(2010), Vol. 3, pp. 61-64, International Journal of Material Forming, C1-1

journal article

On an innovative optimization approach for the design of cross-section profiles of integrally stiffened panels subjected to elasto-plastic buckling deformation modes

J Caseiro, R Valente, A Andrade-Campos, J Yoon

(2010), Vol. 3, pp. 49-52, International Journal of Material Forming, C1-1

journal article

Hole expansion simulation of high strength steel sheet

K Hashimoto, T Kuwabara, E Iizuka, J Yoon

(2010), Vol. 3, pp. 259-262, International Journal of Material Forming, C1-1

journal article

A non-associated constitutive model with mixed iso-kinematic hardening for finite element simulation of sheet metal forming

A Taherizadeh, D Green, A Ghaei, J Yoon

(2010), Vol. 26, pp. 288-309, International Journal of Plasticity, C1-1

journal article

Puncture fracture in an aluminum beverage can

J Yoon, R Cardoso, R Dick

(2010), Vol. 37, pp. 150-160, International Journal of Impact Engineering, C1-1

journal article

A new axi-symmetric element for thin walled structures

R Cardoso, J Yoon, R Dick

(2010), Vol. 45, pp. 281-296, Computational Mechanics, C1-1

journal article

Earing predictions for strongly textured aluminum sheets

J Yoon, O Cazacu, J Whan Yoon, R Dick

(2010), Vol. 52, pp. 1563-1578, International Journal of Mechanical Sciences, C1-1

journal article

Effect of anisotropie yield functions on the accuracy of hole expansion simulations for 590 MPa grade steel sheet

K Hashimoto, T Kuwabara, E Iizuka, J Yoon

(2010), Vol. 96, pp. 557-563, Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, C1-1

journal article

Microstructural evolution and its effect on mechanical properties of commercially pure aluminum deformed by ECAE (Equal Channel Angular Extrusion) via routes A and C

K Kim, D Yang, J Yoon

(2010), Vol. 527, pp. 7927-7930, Materials Science and Engineering A, C1-1

journal article

Effect of Anisotropic Yield Functions on the Accuracy of Hole Expansion Simulations for 590 MPa Grade Steel Sheet

Kazuma Hashimoto, Toshihiko Kuwbara, Eiji Iizuka, Jeong-Whan Yoon

(2010), Vol. 96, pp. B27-B33, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, C1

journal article

Phospholipase D1 Drives a Positive Feedback Loop to Reinforce the Wnt/beta-Catenin/TCF Signaling Axis

Dong Kang, Soung-Hoon Lee, Jeong Yoon, Won-Sang Park, Kang-Yell Choi, Do Min

(2010), Vol. 70, pp. 4233-4242, CANCER RESEARCH, United States, C1

journal article
2009

Effect of asymmetrical rolling and annealing on the mechanical response of an AA1050-O sheet

F Simes, R de Sousa, J Grcio, F Barlat, J Yoon

(2009), Vol. 2, pp. 891-894, International Journal of Material Forming, C1-1

journal article

A novel approach for anisotropic hardening modeling. Part I: Theory and its application to finite element analysis of deep drawing

G Rousselier, F Barlat, J Yoon

(2009), Vol. 25, pp. 2383-2409, International Journal of Plasticity, C1-1

journal article

Buckling analysis for an integrally stiffened panel structure with a friction stir weld

J Yoon, G Bray, R Valente, T Childs

(2009), Vol. 47, pp. 1608-1622, Thin-Walled Structures, C1-1

journal article

A novel approach for modeling of anisotropic hardening and non proportional loading paths, application to finite element analysis of deep drawing

G Rousselier, F Barlat, J Yoon

(2009), Vol. 2, pp. 367-370, International Journal of Material Forming, C1-1

journal article

Comparsion of forming and fracture limits of an aluminum alloy and austenitic stainless steel

A Korhonen, T Manninen, J Yoon, J Larkiola

(2009), Vol. 2, pp. 431-434, International Journal of Material Forming, C1-1

journal article

Development of ultrafine-grained aluminum tubes using severe plastic deformation process

K Kim, J Yoon, D Yang

(2009), Vol. 33, pp. 1087-1090, Transactions of the Korean society of mechanical engineers, A, Seoul, Korea, C1-1

journal article

Interplay between plastic deformations and optical properties of metal surfaces: A multiscale study

M Glazoff, S Rashkeev, Y Pyt'Ev, J Yoon, S Sheu

(2009), Vol. 95, Applied Physics Letters, C1-1

journal article

Stress integration method for a nonlinear kinematic/isotropic hardening model and its characterization based on polycrystal plasticity

R Cardoso, J Yoon

(2009), Vol. 25, pp. 1684-1710, International Journal of Plasticity, C1-1

journal article

Modeling of anisotropic plastic behavior of ferritic stainless steel sheet

D Ahn, J Yoon, K Kim

(2009), Vol. 51, pp. 718-725, International Journal of Mechanical Sciences, C1-1

journal article

Anisotropic hardening and non-associated flow in proportional loading of sheet metals

T Stoughton, J Yoon

(2009), Vol. 25, pp. 1777-1817, International Journal of Plasticity, C1-1

journal article
2008

Mechanical behavior of an asymmetrically rolled and annealed 050-O heet

F Simes, R De Sousa, J Grcio, F Barlat, J Yoon

(2008), Vol. 50, pp. 1372-1380, International Journal of Mechanical Sciences, C1-1

journal article

Enhanced assumed strain (EAS) and assumed natural strain (ANS) methods for one-point quadrature solid-shell elements

R Cardoso, J Yoon, M Mahardika, S Choudhry, R de Sousa, R Valente

(2008), Vol. 75, pp. 156-187, International Journal for Numerical Methods in Engineering, C1-1

journal article

Analytical approach to predict anisotropic material properties from cup drawings

J Yoon, R Dick, F Barlat

(2008), Vol. 1, pp. 301-304, International Journal of Material Forming, C1-1

journal article

Investigation of microstructure characteristics of commercially pure aluminum during equal channel angular extrusion

K Kim, D Yang, J Yoon

(2008), Vol. 485, pp. 621-626, Materials Science and Engineering A, C1-1

journal article

On the use of homogeneous polynomials to develop anisotropic yield functions with applications to sheet forming

S Soare, J Yoon, O Cazacu

(2008), Vol. 24, pp. 915-944, International Journal of Plasticity, C1-1

journal article

On the existence of indeterminate solutions to the equations of motion under non-associated flow

T Stoughton, J Yoon

(2008), Vol. 24, pp. 583-613, International Journal of Plasticity, C1-1

journal article
2007

One point quadrature shell elements: a study on convergence and patch tests

R Cardoso, J Yoon

(2007), Vol. 40, pp. 871-883, Computational mechanics, Berlin, Germany, C1-1

journal article

Enhanced one-point quadrature shell element for nonlinear applications

R Cardoso, J Yoon, R Valente

(2007), Vol. 69, pp. 627-663, International journal for numerical methods in engineering, London, Eng., C1-1

journal article

On the use of a reduced enhanced solid-shell (RESS) element for sheet forming simulations

R Alves de Sousa, J Yoon, R Cardoso, R Fontes Valente, J Grcio

(2007), Vol. 23, pp. 490-515, International journal of plasticity, Amsterdam, The Netherlands, C1-1

journal article

On linear transformations of stress tensors for the description of plastic anisotropy

F Barlat, J Yoon, O Cazacu

(2007), Vol. 23, pp. 876-896, International journal of plasticity, Amsterdam, The Netherlands, C1-1

journal article
2006

Prediction of six or eight ears in a drawn cup based on a new anisotropic yield function

J Yoon, F Barlat, R Dick, M Karabin

(2006), Vol. 22, pp. 174-193, International journal of plasticity, Amsterdam, The Netherlands, C1-1

journal article

Modeling of aluminum alloy sheets based on new anisotropic yield functions

J Yoon, S Hong

(2006), Vol. 177, pp. 134-137, Journal of materials processing technology, Amsterdam, The Netherlands, C1-1

journal article

Design optimization of extruded preform for hydroforming processes based on ideal forming design theory

J Yoon, K Chung, F Pourboghrat, F Barlat

(2006), Vol. 48, pp. 1416-1428, International journal of mechanical sciences, Amsterdam, The Netherlands, C1-1

journal article

A new one-point quadrature enhanced assumed strain (EAS) solid-shell element with multiple integration points along thickness - part II: nonlinear applications

R Alves de Sousa, R Cardoso, R Fontes Valente, J Yoon, J Grcio, R Natal Jorge

(2006), Vol. 67, pp. 160-188, International journal for numerical methods in engineering, London, Eng., C1-1

journal article

A new approach to reduce membrane and transverse shear locking for one-point quadrature shell elements: linear formulation

R Cardoso, J Yoon, R Valente

(2006), Vol. 66, pp. 214-249, International journal for numerical methods in engineering, London, Eng., C1-1

journal article

Review of Drucker's postulate and the issue of plastic stability in metal forming

T Stoughton, J Yoon

(2006), Vol. 22, pp. 391-433, International journal of plasticity, Amsterdam, The Netherlands, C1-1

journal article
2005

Anisotropic strain hardening behavior in simple shear for cube textured aluminum alloy sheets

J Yoon, F Barlat, J Gracio, E Rauch

(2005), Vol. 21, pp. 2426-2447, International journal of plasticity, Amsterdam, The Netherlands, C1-1

journal article

A new one-point quadrature enhanced assumed strain (EAS) solid-shell element with multiple integration points along thickness: part I - geometrically linear applications

R Alves de Sousa, R Cardoso, R Fontes Valente, J Yoon, J Grcio, R Natal Jorge

(2005), Vol. 62, pp. 952-977, International journal for numerical methods in engineering, Chichester, Eng., C1-1

journal article

Sheet metal formability analysis for anisotropic materials under non-proportional loading

T Stoughton, J Yoon

(2005), Vol. 47, pp. 1972-2002, International journal of mechanical sciences, Amsterdam, The Netherlands, C1-1

journal article

Linear transfomation-based anisotropic yield functions

F Barlat, H Aretz, J Yoon, M Karabin, J Brem, R Dick

(2005), Vol. 21, pp. 1009-1039, International journal of plasticity, Amsterdam, The Netherlands, C1-1

journal article

One point quadrature shell element with through-thickness stretch

R Cardoso, J Yoon

(2005), Vol. 194, pp. 1161-1199, Computer methods in applied mechanics and engineering, Amsterdam, The Netherlands, C1-1

journal article

Incorporation of sheet-forming effects in crash simulations using ideal forming theory and hybrid membrane and shell method

H Ryou, K Chung, J Yoon, C Han, J Youn, T Kang

(2005), Vol. 127, pp. 182-192, Journal of manufacturing science and engineering, New York, N.Y., C1-1

journal article

One point quadrature shell elements for sheet metal forming analysis

R Cardoso, J Yoon

(2005), Vol. 12, pp. 3-66, Archives of computational methods in engineering, Dordrecht, The Netherlands, C1-1

journal article
2004

Plane stress yield function for aluminum alloy sheets - part II: FE formulation and its implementation

J Yoon, F Barlat, R Dick, K Chung, T Kang

(2004), Vol. 20, pp. 495-522, International journal of plasticity, Amsterdam, The Netherlands, C1-1

journal article

A pressure-sensitive yield criterion under a non-associated flow rule for sheet metal forming

T Stoughton, J Yoon

(2004), Vol. 20, pp. 705-731, International journal of plasticity, Amsterdam, The Netherlands, C1-1

journal article
2003

Plane stress yield function for aluminum alloy sheets - part 1: theory

F Barlat, J Brem, J Yoon, K Chung, R Dick, D Lege, F Pourboghrat, S-H Choi, E Chu

(2003), Vol. 19, pp. 1297-1319, International journal of plasticity, Kidlington, Eng., C1-1

journal article

Investigation into the wrinkling behaviour of thin sheets in the cylindrical cup deep drawing process using bifurcation theory

J Kim, J Yoon, D Yang

(2003), Vol. 56, pp. 1673-1705, International journal for numerical methods in engineering, Chichester, Eng., C1-1

journal article
2002

Springback prediction for sheet metal forming process using a 3D hybrid membrane/shell method

J Yoon, F Pourboghrat, K Chung, D Yang

(2002), Vol. 44, pp. 2133-2153, International journal of mechanical sciences, Amsterdam, The Netherlands, C1-1

journal article

Development of a one point quadrature shell element for nonlinear applications with contact and anisotropy

R Cardoso, J Yoon, J Grcio, F Barlat, J Csar De S

(2002), Vol. 191, pp. 5177-5206, Computer methods in applied mechanics and engineering, Amsterdam, The Netherlands, C1-1

journal article
2001

Investigation into wrinkling behavior in the elliptical cup deep drawing process by finite element analysis using bifurcation theory

J Kim, J Yoon, D Yang, F Barlat

(2001), Vol. 111, pp. 170-174, Journal of materials processing technology, Amsterdam, The Netherlands, C1-1

journal article
2000

Ideal sheet forming with frictional constraints

K Chung, J Yoon, O Richmond

(2000), Vol. 16, pp. 595-610, International journal of plasticity, Amsterdam, The Netherlands, C1-1

journal article

Earing predictions based on asymmetric nonquadratic yield function

J Yoon, F Barlat, K Chung, F Pourboghrat, D Yang

(2000), Vol. 16, pp. 1075-1104, International journal of plasticity, Amsterdam, The Netherlands, C1-1

journal article

Effect of plastic anisotropy on compressive instability in sheet metal forming

J Kim, D Yang, J Yoon, F Barlat

(2000), Vol. 16, pp. 649-676, International journal of plasticity, Amsterdam, The Netherlands, C1-1

journal article

Wrinkling initiation and growth in modified Yoshida buckling test: finite element analysis and experimental comparison

J Kim, J Yoon, D Yang

(2000), Vol. 42, pp. 1683-1714, International journal of mechanical sciences, Amsterdam, The Netherlands, C1-1

journal article
1999

A general elasto-plastic finite element formulation based on incremental deformation theory for planar anisotropy and its application to sheet metal forming

J Yoon, D Yang, K Chung, F Barlat

(1999), Vol. 15, pp. 35-67, International journal of plasticity, Kidlington, Eng., C1-1

journal article

Optimum blank design in sheet metal forming by the deformation path iteration method

S Park, J Yoon, D Yang, Y Kim

(1999), Vol. 41, pp. 1217-1232, International journal of mechanical sciences, Kidlington, Eng., C1-1

journal article

Elasto-plastic finite element method based on incremental deformation theory and continuum based shell elements for planar anisotropic sheet materials

J Yoon, D Yang, K Chung

(1999), Vol. 174, pp. 23-56, Computer methods in applied mechanics and engineering, Amsterdam, The Netherlands, C1-1

journal article

Comparative investigation into the dynamic explicit and the static implicit method for springback of sheet metal stamping

S Lee, J Yoon, D Yang

(1999), Vol. 16, pp. 347-373, Engineering computations, Bingley, Eng., C1-1

journal article
1998

A stress integration algorithm for plane stress elastoplasticity and its applications to explicit finite element analysis of sheet metal forming processes

S Lee, J Yoon, D Yang

(1998), Vol. 66, pp. 301-311, Computers and structures, Amsterdam, The Netherlands, C1-1

journal article

Influence of initial back stress on the earing prediction of drawn cups for planar anisotropic aluminum sheets

J Yoon, F Barlat, K Chung, F Pourboghrat, D Yang

(1998), Vol. 80-81, pp. 433-437, Journal of materials processing technology, Amsterdam, The Netherlands, C1-1

journal article
1995

Finite element method for sheet forming based on an anisotropic strain-rate potential and the convected coordinate system

J Yoon, I Song, D Yang, K Chung, F Barlat

(1995), Vol. 37, pp. 733-752, International journal of mechanical sciences, Kidlington, Eng., C1-1

journal article

Finite-element analysis and design of binder wraps for automobile sheet metal parts using surface boundary condition

I Song, D Yoo, J Yoon, D Yang, H Huh, J Lee

(1995), Vol. 4, pp. 593-598, Journal of materials engineering and performance, New York, N.Y., C1-1

journal article

Funded Projects at Deakin

Australian Competitive Grants

A Novel Failure Approach for Multi-stage Aluminium Sheet Forming

Prof Jeong Yoon, Mr Robert Dick, Dr Eung-Zu Kim, Dr Xinhai Zhu

ARC Linkage - Projects

  • 2018: $55,458
  • 2017: $107,175
  • 2016: $86,008
  • 2015: $49,369

Industry and Other Funding

Development of Path Independent Forming Limit Method for AHSS

Prof Jeong Yoon

  • 2013: $75,317

Grant Funding to support Prof Yoon for research

Prof Jeong Yoon

  • 2013: $63,987

KITECH Grant funding to support Prof. Yoon for research

Prof Jeong Yoon

  • 2014: $31,960
  • 2013: $41,310

A Novel Failure Approach for Multi-stage Aluminium Sheet Forming

Prof Jeong Yoon, Mr Robert Dick, Dr Eung-Zu Kim, Dr Xinhai Zhu

  • 2018: $28,000
  • 2017: $25,479
  • 2015: $41,631

A study for design technology of heavy plate rolling mill without thickness ratio limit

Prof Jeong Yoon

  • 2015: $43,200
  • 2014: $18,000

Membership fee for GM participation in the ICIM

Prof Jeong Yoon

  • 2020: $88,339
  • 2019: $71,746
  • 2018: $66,368
  • 2017: $60,671
  • 2015: $135,265

Generic Project with POSCO in the ICIM

Prof Jeong Yoon

  • 2020: $78,382
  • 2019: $72,056
  • 2017: $65,079
  • 2016: $59,192
  • 2015: $66,044

Advanced Fracture Modeling for Crashworthiness of Aluminum Wheel (Phase-1)

Prof Jeong Yoon

  • 2017: $32,115
  • 2015: $22,931

Generic Project with KIMS in the ICIM

Prof Jeong Yoon

  • 2020: $50,000
  • 2019: $73,931
  • 2018: $63,932
  • 2017: $63,230
  • 2015: $69,608

Generic Project with SungWoo HiTech (Tier-2) in the ICIM

Prof Jeong Yoon

  • 2018: $25,796
  • 2017: $25,398
  • 2016: $26,626

Thermo-mechanical deformation model for hot rolling process (Phase-I)

Prof Jeong Yoon

  • 2017: $44,379
  • 2016: $32,096

Generic Project with LG Electronics in the ICIM

Prof Jeong Yoon

  • 2020: $72,600
  • 2019: $70,861
  • 2018: $61,627
  • 2016: $66,655

Novel Fracture Modelling for Sheet Forming and Generic Project with KITECH in the ICIM

Prof Jeong Yoon

  • 2019: $64,000
  • 2018: $33,660

Generic Project with DAEWOO in the ICIM

Prof Jeong Yoon

  • 2020: $30,745

Other Funding Sources

AutoCRC 3-122 - Implementation of Advanced Constitutive & Failure Models Based on Non-Associate Flow Theory into LS-DYNA and PAM-STAMP

Prof Jeong Yoon

  • 2016: $34,828
  • 2015: $135,559
  • 2014: $26,610

Supervisions

Principal Supervisor
2020

Prudvi Paresi

Thesis entitled: Dynamic Fracture under High Strain Rates and Its Application to Chip Formation in AA 2024-machining

Doctor of Philosophy (Engineering), Institute for Frontier Materials

2019

Adrien Pradeau

Thesis entitled: Anisotropic behaviour and fracture for sheet metals under associated and non-associated flow plasticity

Doctor of Philosophy (Engineering), Institute for Frontier Materials

2017

Robert Earl Dick

Thesis entitled: Anisotropy and Failure Modeling for Nonlinear Strain Paths and Its Application to Rigid Packaging

Doctor of Philosophy (Engineering), School of Engineering

2015

Mariana Paulino Santos

Thesis entitled: Anisotropy for metals in Non-Associated Flow Plasticity

Doctor of Philosophy (Engineering), School of Engineering