Mr Majid Laleh

Heat treatment for metal additive manufacturing

M Laleh, E Sadeghi, R Revilla, Q Chao, N Haghdadi, A Hughes, W Xu, I De Graeve, M Qian, I Gibson, M Tan

(2023), Vol. 133, Progress in Materials Science, C1

A three-dimensional electrode array probe designed for visualising complex and dynamically changing internal pipeline corrosion

M Laleh, Y Xu, M Tan

(2023), Vol. 211, Corrosion Science, C1

A systematic study on the influence of electrochemical charging conditions on the hydrogen embrittlement behaviour of a pipeline steel

Peng Zhang, Majid Laleh, Anthony Hughes, Ross Marceau, Tim Hilditch, Mike Tan

(2023), International Journal of Hydrogen Energy, C1

Site-specific local polarisation curve measurements for probing localised corrosion and inhibition

M Laleh, M Pathirana, M Tan

(2023), Vol. 214, pp. 111019-111019, Corrosion Science, C1

Low-Frequency ultrasonic tomography of Corrosion-induced damage patterns on naturally corroded solid reinforcing bar rock bolts

S Gharehdash, M Laleh, D Sainsbury, M Barzegar, B Sainsbury

(2023), Vol. 392, pp. 1-24, Construction and Building Materials, Amsterdam, The Netherlands, C1

The critical effect of rust layers on localised corrosion of steel exposed to waterline environments

M Pathirana, M Laleh, A Somers, B Hinton, M Tan

(2023), Vol. 221, pp. 111333-111333, Corrosion Science, C1

Electrode array probe designed for visualising and monitoring multiple localised corrosion processes and mechanisms simultaneously occurring on marine structures

M Laleh, Y Huo, R Melchers, M Tan

(2023), Vol. 7, pp. 1-5, npj Materials Degradation, London, Eng., C1

Enhancing the repassivation ability and localised corrosion resistance of an additively manufactured duplex stainless steel by post-processing heat treatment

Majid Laleh, Nima Haghdadi, Anthony Hughes, Sophie Primig, Mike Tan

(2022), Vol. 198, pp. 1-12, Corrosion Science, Amsterdam, The Netherlands, C1

Atomically-thin Schottky-like photo-electrocatalytic cross-flow membrane reactors for ultrafast remediation of persistent organic pollutants

P Kumari, N Bahadur, X Conlan, M Laleh, L Kong, L O'Dell, L Dumée, A Merenda

(2022), Vol. 218, pp. 1-16, Water Research, London, Eng., C1

Quantitative 3D Characterization for Kinetics of Corrosion Initiation and Propagation in Additively Manufactured Austenitic Stainless Steel

Jianli Li, Anthony Hughes, Y Yang, Majid Laleh, Haipeng Wang, Xufang Zhang, Jie Ma, Wei Xu, Mike Tan

(2022), Vol. 9, pp. 1-19, Advanced Science, London, Eng., C1

Grain boundary character distribution in an additively manufactured austenitic stainless steel

Majid Laleh, Anthony Hughes, M Tan, Gregory Rohrer, Sophie Primig, Nima Haghdadi

(2021), Vol. 192, pp. 115-119, Scripta Materialia, Oxford, Eng., C1

A critical review of corrosion characteristics of additively manufactured stainless steels

M Laleh, A Hughes, W Xu, I Gibson, M Tan

(2021), Vol. 66, pp. 563-599, International Materials Reviews, C1

A critical insight into lack-of-fusion pore structures in additively manufactured stainless steel

M Laleh, A Hughes, S Yang, J Wang, J Li, A Glenn, W Xu, M Tan

(2021), Vol. 38, Additive Manufacturing, C1

On the pitting corrosion of 2205 duplex stainless steel produced by laser powder bed fusion additive manufacturing in the as-built and post-processed conditions

N Haghdadi, M Laleh, H Chen, Z Chen, C Ledermueller, X Liao, S Ringer, S Primig

(2021), Vol. 212, pp. 1-10, Materials and Design, Amsterdam, The Netherlands, C1

Two and three-dimensional characterisation of localised corrosion affected by lack-of-fusion pores in 316L stainless steel produced by selective laser melting

M Laleh, A Hughes, S Yang, J Li, W Xu, I Gibson, M Tan

(2020), Vol. 165, Corrosion Science, C1

Unanticipated drastic decline in pitting corrosion resistance of additively manufactured 316L stainless steel after high-temperature post-processing

M Laleh, A Hughes, W Xu, P Cizek, M Tan

(2020), Vol. 165, Corrosion Science, C1

Additive manufacturing of steels: a review of achievements and challenges

Nima Haghdadi, Majid Laleh, Maxwell Moyle, Sophie Primig

(2020), Vol. 56, pp. 64-107, Journal of Materials Science, Berlin, Germany, C1

The effect of phase transformation route on the intergranular corrosion susceptibility of 2205 duplex stainless steel

N Haghdadi, M Laleh, A Kosari, M Moayed, P Cizek, P Hodgson, H Beladi

(2019), Vol. 238, pp. 26-30, Materials letters, Amsterdam, The Netherlands, C1

Unexpected erosion-corrosion behaviour of 316L stainless steel produced by selective laser melting

M Laleh, A Hughes, W Xu, I Gibson, M Tan

(2019), Vol. 155, pp. 67-74, Corrosion science, Amsterdam, The Netherlands, C1

On the unusual intergranular corrosion resistance of 316L stainless steel additively manufactured by selective laser melting

M Laleh, A Hughes, W Xu, N Haghdadi, K Wang, P Cizek, I Gibson, M Tan

(2019), Vol. 161, Corrosion Science, C1

Effect of treatment time on characterization and properties of nanocrystalline surface layer in copper induced by surface mechanical attrition treatment

F Kargar, F Kargar, M Laleh, M Laleh, T Shahrabi, T Shahrabi, A Rouhaghdam, A Rouhaghdam

(2014), Vol. 37, pp. 1087-1094, Bulletin of Materials Science, C1-1

Optimisation of experimental conditions for pulse electrodeposition of nanostructured platinum

H Nasiri Vatan, H Nasiri Vatan, M Mohammad Shafiee, M Mohammad Shafiee, A Khanfekr, A Khanfekr, M Laleh, M Laleh, H Kaffashan, H Kaffashan, K Jafarzadeh, K Jafarzadeh

(2014), Vol. 30, pp. 89-96, Surface Engineering, C1-1

Low-temperature nitriding of nanocrystalline stainless steel and its effect on improving wear and corrosion resistance

M Laleh, M Laleh, F Kargar, F Kargar, M Velashjerdi, M Velashjerdi

(2013), Vol. 22, pp. 1304-1310, Journal of Materials Engineering and Performance, C1-1

Investigation of rare earth sealing of porous micro-arc oxidation coating formed on AZ91D magnesium alloy

M Laleh, M Laleh, F Kargar, F Kargar, A Rouhaghdam, A Rouhaghdam

(2012), Vol. 30, pp. 1293-1297, Journal of Rare Earths, C1-1

Prevention of weld-decay in austenitic stainless steel by using surface mechanical attrition treatment

Majid Laleh, Majid Laleh, Farzad Kargar, Farzad Kargar, Alireza Rouhaghdam, Alireza Rouhaghdam

(2012), Vol. 2, INTERNATIONAL NANO LETTERS, C1-1

Effect of surface nanocrystallization on the microstructural and corrosion characteristics of AZ91D magnesium alloy

M Laleh, M Laleh, Farzad Kargar, Farzad Kargar

(2011), Vol. 509, pp. 9150-9156, JOURNAL OF ALLOYS AND COMPOUNDS, C1

Improvement in corrosion resistance of micro arc oxidation coating formed on AZ91D magnesium alloy via applying a nano-crystalline sol-gel layer

M Laleh, M Laleh, Farzad Kargar, Farzad Kargar, A Rouhaghdam, A Rouhaghdam

(2011), Vol. 59, pp. 297-303, JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, C1

Formation of high bioactive nanoporous titania film by hybrid surface mechanical attrition treatment

M Laleh, M Laleh, Farzad Kargar, Farzad Kargar

(2011), Vol. 65, pp. 2295-2298, MATERIALS LETTERS, C1

Suppression of chromium depletion and sensitization in austenitic stainless steel by surface mechanical attrition treatment

M Laleh, M Laleh, Farzad Kargar, Farzad Kargar

(2011), Vol. 65, pp. 1935-1937, MATERIALS LETTERS, C1

Effect of alumina sol addition to micro-arc oxidation electrolyte on the properties of MAO coatings formed on magnesium alloy AZ91D

M Laleh, M Laleh, A Rouhaghdam, A Rouhaghdam, T Shahrabi, T Shahrabi, A Shanghi, A Shanghi

(2010), Vol. 496, pp. 548-552, JOURNAL OF ALLOYS AND COMPOUNDS, C1

Enhancement of corrosion protection of micro-arc oxidation by applying nanostructured TiO2 thin film via the "sol-gel" method

M Aliofkhazraei, M Aliofkhazraei, A Rouhaghdam, A Rouhaghdam, M Laleh, M Laleh, A Shanaghi, A Shanaghi

(2010), Vol. 57, pp. 75-82, ANTI-CORROSION METHODS AND MATERIALS, C1-1